How to open a VAZ without a key
The main reasons may be:
- jammed or broken lock;
- loss of keys;
- a slammed car door with the keys in the cabin;
- dead battery;
- ice in the locking mechanism and so on.
Let's look below at how to open a jammed door without keys for various reasons.
How to open a VAZ 2110
How to open a jammed door? First of all, you need to check if your trunk is closed. If it is open, then you will not have to break the car and you will easily get into the interior. And the question of how to open without a key will be removed from the agenda.
How to open a VAZ 2110 without a key
If you are thinking about how to open a car without a key using a rough but quick method, you can break out the car window with a stone or other heavy object, but you need to remember that replacing glass is expensive.
Another option for rough opening is to drill out the lock with a drill. But this method is applicable only when there is access to electricity and a tool.
How to open the door of a VAZ 2110
How to open a car with minimal effort? In this situation, there is only one way out and it consists in contacting a specialized company for emergency opening of automobile locking systems.
Moreover, the services are much cheaper than replacing broken glass or completely replacing the locks on your car. Another very important advantage of this service is that specialists respond to your call as quickly as possible.
Emergency opening companies are located in every city, so no matter where you are, you will always receive qualified assistance.
How to open a VAZ 2109
One of the simplest ways to answer the question of how to open without keys is to use a piece of rigid but flexible wire up to one meter long. You need to make a hook at the end of the wire, this structure needs to be inserted between the glass and the seal and find the door rod. Once you succeed, you need to pull the hook towards yourself and you will no longer have problems.
How to open a VAZ 2109 without a key
If you understand locking mechanisms and know how to use master keys or knitting needles, then you will not have any problems. You just need to install the master keys in the keyhole and, carefully operating them, carry out the necessary actions to open it.
How to open the door of a VAZ 2109
If you keep spare keys at home or your friends or relatives have them and you are close enough to them, it would be wise to just go and get a duplicate.
How to open a VAZ 2112
If you don’t know how to open a car if the lock has frozen in the cold, you will definitely find the instructions below useful.
The essence of the method is to heat the key with a lighter and insert it into the keyhole, thus melting the ice. It is quite possible that you will not succeed the first time. If the door of the VAZ 2110 still does not open, you can repeat the procedure several times.
How to open a VAZ 2112 without a key
Another method that will help those who do not know how to open a car without a key is the method based on the use of a ruler. To use it you will need to get a long, thin and strong metal ruler, pushing it under the glass, you can apply pressure to the locking mechanism and open the door.
How to open the door of a VAZ 2112
If you don’t have special equipment on hand, even an ordinary lace will help. You need to tie a loop on it and push it into the cabin by lowering the glass with your hands. Then all you have to do is hook the lock, tighten the loop and pull the cord towards you.
Therefore, the answer is very simple. Use a lanyard!
How to open a VAZ 2114
If you have a VAZ 2114, how can you open it with the help of specialists?
You can call the nearest service station and find out if they have a locksmith who knows how to open locks. The service station has all the tools that will help solve your problem. All you have to do is thank the master by paying for his services.
How to open the door of a VAZ 2114
If the door of the VAZ 2109 does not open and conventional methods do not produce results, you can resort to rough ones.
For example, you can forcefully insert a screwdriver into a keyhole and then turn the lock. Even if you cannot remove the lock, there will be no problems opening the door. Consider the fact that it is almost impossible to insert a screwdriver without a hammer.
How to open a VAZ 2115
It happens that the battery unexpectedly runs out for the owner, the alarm goes off and leaves the door locked. How to open it in this case?
It’s quite simple, you need to put a special pad between the body and the hood of the car, inflate it and make a small hole.
After this, you just need to connect the positive terminal of your car’s battery with a wire to the positive terminal of another, fixing the “minus” on the disk, and after connecting, press the key fob button. It is best to have someone help you with this procedure.
As you can see, there are no hopeless situations.
The lock does not work: reasons and actions
First, it’s worth understanding the reasons for the lock’s malfunction. The latter can become clogged with dust or dirt, and the key only compacts all this in the well. To deal with damage, you need to fill the lock with a cleaning mixture, leaving it for a quarter of an hour. In winter, for example, the door may jam if moisture gets into the mechanism. In the cold the door blocks the handle with the keys, so the car must first be driven into the garage to warm up.
If the lock is broken or the door is slammed in the VAZ-2114 from the inside with a key, these methods will not work. You can use the following recommendations:
- you need to take an awl and a hard long wire, making a hook at the end;
- Use an awl to remove the outer seal of the car glass to create a gap;
- it is necessary to lower the wire into the hole until it rests against the latch of the lock;
- then you need to turn and rotate the hook, allowing the wire to pass further; if it falls through easily, you should pull it back, thanks to which you will be able to pry the lock;
- You should put the seal back and open the car door.
The whole process will take about 10 minutes.
Preventing door jams
The main reason for the breakdown: long-term operation, but the service life of the part is reduced if the driver does not carry out preventive maintenance. Basic moments:
- Cleaning of internal parts, treatment with special substances.
- Power loop lubrication.
- Removing adhered dirt. The procedure is carried out at least twice a year: in spring and autumn. Active ingredients for treatment: Liqui Moly Schnell-Reiniger cleaner, Liqui Moly Wartungs-Spray weiss dirt-repellent white lubricant.
- Lubrication of hinges, internal parts, rubber seals, door stops.
The procedure is especially relevant before the winter season, when the treatment prevents the mechanism from freezing when moisture enters. Spring prevention minimizes damage to the door mechanism from ultraviolet radiation.
How to open a VAZ 2115
It is impossible to get into a locked car without outside help. You need to call a technician who knows how to open a VAZ 2114 without damage
and further replacement of the lock or glass. This is exactly what leads to the opening of the car by the confused owners who find themselves on the other side of the cabin.
In a state of despair and panic, the driver can personally cause significant damage to the car. As a result, repairs will cost much more than calling a specialized service employee for emergency opening of car locks. Methods for emergency opening of cars are often the same.
The proposed methods for opening a VAZ 2115 and 2114 are not too different
Before opening the 2114 machine yourself, it is better to pay attention to the services of a professional emergency opening. The procedure will not take much time, but the VAZ will remain intact and undamaged
. Regarding the question of how to open a VAZ 2115, the recommendations are similar. Do not risk your car, but entrust the solution to the problem to our service employees. We guarantee:
- fast and high-quality
opening of the car’s central lock; - absence of the slightest damage
or scratches on your car; - high professional level
of employees; - use of modern tools in the process of performing work;
- provision of a range of related services: opening the hood, trunk, unlocking the ignition switch;
- affordable price level
for services provided.
Thanks to our extensive experience in cooperation with lock manufacturing factories, our specialists work with the minimum possible damage to the lock, and we always leave the door intact - this is a guarantee! We save your money!
In our office there are always several telephone operators on duty, and, of course, technicians. The team is friendly, and as soon as the first beep rings, the whole team is ready to help. Contact us!
This article will help you save time, money, and your own nerve cells.
I would like to note right away that the purpose of this article is to help those who are in an unpleasant situation and cannot get into THEIR car. I am in no way advocating any illegal actions and am not an experienced burglar, and this article is not positioned as a manual for car burglars. All I want is to help the “drowning” who are in an unpleasant situation associated with automatic locking of car doors.
I was never able to understand why this happens. Why manufacturers of cars and car alarms came up with such an option is not clear to me personally. Perhaps you will have some ideas on this matter, in which case do not hesitate and comment.
VESKO-TRANS.RU
AutoNews / Reviews / Tests
How to Open the Trunk of a VAZ 2115 Without a Key
How to open the trunk of a VAZ 2115 desert
Motorists know it's too much. There is a problem with the lock breaking. This is especially true for Russian-made cars, the quality of which is not ideal in almost all respects. The worst thing about this is that the malfunction is unexpected when it is absolutely necessary .
, spare, pump, in other words, some kind of thing in the rear compartment. It is for this reason that it is important to know how to open a chest without a key if the passage breaks its lock. Every motorist will need this skill. both for everyday use and for long trips.
If the trunk is separate
Car or coupe. These are body types in which the luggage compartment is not directly connected to the cabin. What to do in this situation? To open the trunk, you need to open the rear doors of the car and try to lower the rear part of the passenger sofa (if the design of the car allows such an operation). To dismantle old foreign cars and representatives of the Russian automobile industry, you will have to bend the metal hinges welded to the body.
Now evaluate whether there is access to the luggage compartment from the cabin. Nearly half of cars are prevented from leaking into the rear compartment due to the presence of a hard shell amplifier located behind the seat back (in most cases it looks like metal strips welded together). how to open the trunk
in this case? Here's how:
- Take a flashlight and look inside the compartment. Carefully inspect the location of the lock (if the trunk is not loaded, the mechanism will be subject to close attention).
- Design a winch extension, then attach it to a long stick (piece of rebar) using the extension.
- If the car has skin, it will have to be removed. To do this, prepare an extension cord (now for a screwdriver).
EASY WAYS TO OPEN A VAZ
Now let's get down to the methods. Conventionally, they can be divided into two groups: radical - when actions are decisive and not always justified, and delicate - calmer, conservative methods:
Radical | Delicate |
Break the lock | Open trunk |
Break out the glass | Open the hood |
Open the door with wire |
As you understand, it is better to use delicate methods, since more decisive and drastic ones will lead to the fact that you will have to pay for repairs. For example, if you break the lock to your vehicle, you will have to order it along with new keys and wait a long time until the order is fulfilled. Thus, you will not be able to use the car. Well, having broken the glass, you will have to install a new one.
Let's look at delicate methods
METHOD 1: OPENING THE TRUNK
To open the trunk of a VAZ, you will need:
- Using an open palm, strike the area below the trunk lock. The blow must be strong and sharp enough.
- Take an awl (if it’s not there, then buy a nail file at the nearest stall, and you don’t have to open the trunk).
- Using an awl or nail file, try to get under the door seal and press the tongue.
- The door is open!
METHOD 2: OPEN THE HOOD
- You will have to crawl under the car to get the lanyard connected to the hood latch. If you can't find it, try to find it through the radiator mesh.
- Mechanically press the tongue or simply pull the cable, the hood will open.
- On the car battery, find the terminals with the “minus” value, click them on the mount a couple of times.
- Since the body has a “minus” value, disconnecting it with the terminal will cause the doors to unlock.
METHOD 3: OPEN THE VAZ DOOR
- To do this, you will need a fairly stiff wire, go to a hardware or construction store and buy it. Or use a woman's nail file, but you will still need wire.
- Using the item of your choice, pick out the glass seal near the door lock.
- Bend the wire with a hook and begin to push this hook into the hole formed.
- The hook will rest against the base of the lock; twist it until the hook goes down.
- As soon as the hook falls down, use it to hook the lock and pull the hook towards you.
- The door is open!
FINALLY
To avoid such trouble, you just need to choose a person whom you trust to store your spare keys. If something happens, you can go to him or he will bring you the keys himself.
It also makes sense to save in your phone the number of a locksmith who can help you solve such an unpleasant problem.
If you have no experience or even an understanding of how locks are made, then it is better to immediately call a specialist who will do everything quickly and accurately than to try to open the car with your own hands, especially since there is a high risk of damaging it.
Adequate methods
This will surprise many, but there are much more adequate methods to get into an automatically locked car without damaging it than radical and expensive ones.
So, the car is locked from the inside with the keys in the ignition, it’s a long drive to get the keys, and I don’t want to spend money either on a special company or on subsequent repairs:
1. Open the trunk to get into the cabin. There are several methods to perform this task:
- We apply a strong impulse blow with an open palm just below the lock, and the vibration will complete everything for you and the latch will open;
- take an awl (a woman’s nail file or manicure scissors) but not a screwdriver. We insert the existing object under the seal and press the tongue.
We carry out the opening operation in the following order:
1. Carefully pull off the rubber seal between the glass and the door in the area of the handle. Lubricate the resulting gap. If the seal cannot be torn, there is no need to tear it, leave it alone. It will be a little more difficult, but our main goal is to do no harm.
2. Bend a small hook at one end of the prepared wire with an angle of no more than 50 degrees. Lubricate the wire generously over the entire surface, from the hook up to 40-45 centimeters.
3. Carefully but confidently insert the wire with the hook downwards into the gap formed between the seal and the door.
4. Having pushed the wire down 30-35 centimeters, we begin to pull it in the opposite direction. On its way back, our hook must engage the longitudinal rod of the lock mechanism and pull it up, thereby forcing the door opening mechanism to work. If the wire has free movement and does not touch the rod, you should move it to the right or left and continue. This is where our prepared patience comes in handy. We repeat the manipulations with the wire until a characteristic click and the door opens.
Interesting stuff nearby: Computer diagnostics of cars: what is it for?
5. After achieving the desired result, remove the wire, insert the seal in place, and wipe the opening area with a dry cloth.
How can you open a locked door on a VAZ 2106 without a key.
If the locks on the doors of your car are frozen or refuse to work, this does not mean at all that the lock on the trunk lid is also faulty. It doesn't hurt to keep a spare set of keys with you.
After some time, the alarm goes off, the doors are blocked, and the confused owner cannot get into his car. And let’s make a reservation right away - too thin a wire will not work.
And in some cases, a rubber cushion simply cannot create the necessary gap without damaging the car. The wire should be smooth, without waves or rough burrs. Using a special pump, which comes complete with a rubber cushion, the pressure can be increased or decreased, thereby increasing or decreasing the gap to the required size.
We'll have to look for another option. The battery runs out, the alarm turns off and locks the door. 5.1 Opening a car door with a dead battery 5.1.1 Opening a Renault with a dead battery How to open a VAZ 2110 without a key using a wire All that remains is to insert the wire between the window seal and the glass and try to hook the rod going to the door lock.
How will the master open the car? This is not easy to do, but it is possible. If the loop is successfully draped, all that remains is to tighten it around the flag and then gently pull it up.
And in this case, it will not be possible to do without an additional tool. A fishing line or rope will help if there is a special flag above the lock of your car, which, if the car is locked, is not completely recessed into the door trim. All that remains is to open the hood and charge the dead battery.
To completely discharge it, it is enough to leave the car with the low beam headlights on. With their help, it is quite easy to open a domestic car or an old foreign car, but on modern cars, which are protected from theft by much more advanced security systems, all of them may be powerless. Method No. 3 This method seems too obvious, but for some reason it is most often forgotten.
After this, you need to bend one edge of the wire so that its shape is in the form of a small hook. Here you will need to try it on, since the length of the wire should be 10-20 cm longer than the length equal to the distance from the rubber seal located at the bottom of the door window to the car door handle.
You can, of course, break the driver's side window and then open the car. The door is open! Check it out. It is also worth mentioning that the three methods listed above may not always help.
3 How will the master open the car? So, if the doors of a car, for example, a VAZ 2112, are locked and the keys are hanging in the ignition, then you need to find a small piece of 50-60 cm of rigid wire, 3-4 mm in diameter.
After this, we make a loop in the middle, which should eventually tighten. If this was not possible on the first try, then you should try again. In most cases, it is relevant for domestic cars, although it is also applicable to some foreign car models. It is done.
It will be much easier to insert it under the door seals, which in modern cars are often duplicated and fit very tightly to the body.
If you don’t have spare keys with you, or they are lying somewhere at home, several tens of kilometers away, then you won’t be able to open the car the usual way.
Several options for getting out of the situation
So, let's look at how we can solve this problem. Most likely, many have never had the opportunity to open their car without a key. Accordingly, the situation that has arisen will cause the majority of car owners certain difficulties getting inside the car. The simplest solution to the problem is to call someone close to you and ask them to bring a spare set of keys. However, this may well not happen, or the trouble happened, for example, in another city.
You can try to get into the salon using certain simple manipulations. However, one point should be noted immediately here.
Everything looks very simple if you look at the situation from the outside, for example, in a movie, watching how burglars deal with a locked car in just a second. In real life, you will need some skill and patience, especially if you have never done this before.
You can open the doors of the VAZ-2115 using:
- lace or strong fishing line with a loop;
- metal wire with a hook at the end.
In the first case, the main thing is to get to the latch responsible for locking and unlocking the lock. For example, you are lucky if, when leaving, you left the side window slightly open. In this case, it is enough to arm yourself with a lace - even one pulled from shoes will do, making a loop at its end. We push it into the existing slot, hook the latch and pull it up.
Everything should be done extremely carefully, slowly, without unnecessary movements. If the glass is closed, you can try to move it down with simple physical effort. Place both palms and try your best to lower it. After all, in order to reach the latch using a lace, you need a gap of only a few millimeters. If the window lift mechanism is loose, this method is quite suitable.
In order to implement the next option, you will need certain available tools - metal wire. Next, remove the bottom rubber seal from the side glass. It's not very difficult to do this. By the way, you don’t have to worry about damaging the seal. It is very inexpensive and changes very quickly. Next, we take the previously prepared wire - its length should be at least 30 centimeters - and make a hook at the end, bending it at an acute angle. By the way, an ordinary electrode fits perfectly in size.
Once the tool is ready and the “field of action” is open, you can proceed directly to the “rescue operation.” In order to open the door, you should insert the wire into the gap between the door and the glass. The goal here is to pull the mechanism that opens the door - it is precisely this that needs to be hooked. It is located approximately opposite the door handle, so you should look in this area.
With the proper skill, even without any prior experience, it is usually possible to successfully complete this procedure quite quickly. By the way, trained people, including burglars, can open a car in this way in just a few seconds. It is enough to push the rod up a very short distance - a few millimeters is enough to get the desired access to the interior.
Finally, the most radical option for opening a door without a key is to break the side glass and then pull the latch up. You need to start implementing it only if there are simply no other options for getting inside the car. In addition, do not forget to make sure that the keys are actually left in the car. Otherwise, you will then have to solve another, no less serious problem - starting the engine. In addition, do not forget that replacing glass today is not such a cheap pleasure. So think it over again. In the “tag”, an economical replacement option would be a small glass located between the rear pillar and the door. If you do not have a very thick hand, after this it will be quite possible to reach the lock button.
When breaking glass, you don’t need to be like movie characters and do it with your elbow or even your fist. Take, for example, a hammer or, in extreme cases, a stone. And finally, I would like to give some very important advice. Before you begin to implement the methods described above in practice, make sure that you have the documents for the car with you. Passers-by, seeing such manipulations, may well call the police, after which they will have to prove their ownership to law enforcement officers.
Source: ladaautos.ru
Search
How to open a VAZ 2114 without a key? VIDEO In everyone's life, situations may arise when, due to an inconvenient coincidence, the car keys remain inside the broken car. As a rule, a spare set of keys is out of reach (at home, at work, in another part of the city) or completely missing. What should an unfortunate motorist do in this case without the help of a locksmith - we will look in more detail in our article.
A creation of the Russian automobile industry, the presented VAZ 2114, unlike its predecessors, is equipped with cylindrical plugs on the doors, which eliminates the possibility of opening the door using a cable or a pin. In this case, We will come to the rescue with the help of ordinary iron wire.
So, the sequence of actions will be:
It is no secret that the density of the VAZ 2114 cabin is achieved through the use of rubber sealant for glass. To secure the glass, the sealant is placed at its base: between the door frame and the concrete window glass. To get inside the machine, we need to carefully tear off the edge of the seal (from the locking mechanism) and pull it out of the groove. It is most convenient to push the material with a narrow, flat object (a nail file, a flat screwdriver or a narrow stem). There is no need to remove the entire filling, because for the next manipulations we will only have a few cm of free space. Next, it will be useful for us to find a suitable piece of metal wire. Its length should be no less than the height of the door. At the end of the rod it is necessary to make a bend 2-3 cm long at an angle of 45 0. Now we can proceed directly to the opening procedure itself. Insert the bent end of the wire into the cut slot in the door until it meets the barrier. This is usually a locking mechanism. Next you need to carefully twist, push, move the wire to find a way around the lock
When you feel that the rod has failed, you need to carefully move the wire so that the bent end clamps the locking lever. Gently pull the wire up to open the door.
You may also like
The eternal problem of the pelvis can be solved quite simply)
The highway opens at the VAZ-2114 course. What should I do?
Lock Trunk VAZ
—2114
.
Typically, the entire process, without any finesse, only takes a few minutes. The most problematic thing in this situation is finding a rod that is the right length, stiffness and thickness to help solve the problem of closed doors.
How to open the trunk without a key on a VAZ 2114?
Every car owner can simply forget the keys in the trunk or lose them. These situations are quite common, so you shouldn't be surprised or overly concerned. If you can't open the lock, you can always pick and buy a new one. Next we will look at how to open the trunk of a VAZ 2114 without a key?
There are several methods, including the following:
You may also like
Experts recommend simply moving your finger just below the trunk lid. If there is a strong impact, the locking tab should return and the lock will open. In most cases this method works. The vibration will travel through the metal and cause the lock tongue to return.
You can also try lifting up the rubber seal just below the lock. You can use a sharp object. Ideal screwdriver or flathead screwdriver
Care must be taken not to damage the seal. The sharp object should be lubricated with the tongue of the lock and pressed tightly
If you do everything correctly, you should be able to do without replacing the lock.
Drivers who have forgotten or lost their keys are interested in the question: how to open the trunk of a 2114 without a key? Let's try the following methods:
You can use a women's nail file
When doing this, care must be taken not to damage the lock. Regular wire is also suitable for this purpose
In this case, you can try using your neighbor's keys. Quite often, keys from other models can end up in the trunk of a VAZ 2114.
In a hopeless situation, you can call the specialist. At the same time, the services of a specialist may be more expensive than installing a new lock. So you can safely break it with a screwdriver.
You can get into the trunk from the passenger compartment. This usually requires updating the back seat. This will give you a little download access. If there is a lot of stuff in it, nothing will come of it. Otherwise, try removing the two screws that secure the lock. You need to get an extension cord and a 10mm socket. This is a difficult task, but worth a try if you have experience in car repairs.
You can simply insert a screwdriver into the lock and turn it. Then you will need to replace it.
Door opening method
If the VAZ-2109 door does not open from any side, then it is difficult to find the cause of the breakdown, since there is absolutely no access to the lock mechanism.
A somewhat lighter version of the breakdown occurs when the door does not slam shut completely and gets stuck in that position. Then it is possible to reach the latch from the outside with a sharp object.
To open a jammed door, you first need to do the following:
- When the sash is not completely slammed shut, try to get to the locking device using a flat metal ruler. Maybe it will be possible to open by analogy with ordinary door locks with a latch.
- If the door is completely closed, try to move it to the slightly open position to gain access to the lock. To do this, try pressing the inner and outer handles together or alternately, immediately pushing the door from the inside.
- Try to open it with an assistant, who will press or release it in order to find the required position while you try to open the lock.
When simple means do not produce results, the door will have to be opened from inside the cabin, which will require removing its trim.
Radical approach
If there is no time, and nerves are at their limit, some car enthusiasts resort to them, but these are the worst ways to open a car. Imagine that you decided to sell your car in a year, and the buyer you came across was attentive and meticulous. Traces after an approach by brute force will remain with a 99% probability, and such a car will be sold for a very long time, because no one will believe that it was not in an accident.
If you decide then:
- We break out the lock - take a screwdriver and hammer it into the lock cylinder, and then turn it. This method is incredibly expensive, because further repairs are required. You will be faced with the fact that instead of one cylinder you will have to change all 5 (doors + trunk), and after the repair you will have two keys. In order to have only one key, you will have to order expensive locks and wait a long time, dooming yourself to the inability to use the car always open.
- We break the glass - when you damage the lock, but do not open the car, break the glass. It is necessary to break the rear door glass (preferably the right one). There are several reasons for this decision: firstly, a window sealed with tape will not spoil visibility, and secondly, if after breaking it turns out that the back door of the VAZ 2114 does not open, and you have to knock out all the glass to get through, you will have less wind later. And don’t break the glass with your hands - find a hammer, otherwise, in addition to a car mechanic, you will also need a surgeon.
WORTH KNOWING! Another tip is to buy the tape in advance, because if the fragments hang on it, you will not have to clean the interior. Imagine the area you are going to hit as a square and cover it with tape on only one side.
What to catch?
We carefully examine the inside of the door through the opposite glass. Determine where the lock latch is located. It can be located either in the upper part of the card (inner trim) of the door or on the handles, but occasionally in another place.
We inspect the outer part of the door and pay attention to where the door handle, cylinder, and door locking mechanism are located.
The lock itself (the locking mechanism) is usually located at the end in the middle part of the door, if you do not take into account the glass frame.
From everything discussed above, we conclude where exactly that rod is located, by pulling which the door will unlock.