Tuning headlights for a VAZ 2109 - which tuned headlights to install

Optics

Only installation of fog lights and daytime running lights is allowed.
There is a strict restriction on the color of lighting devices: no red or white can be used. Since the colors are applied and assigned to the head optics and brake lights. The technical regulations do not prohibit illumination of the bottom in permitted colors. The installation of non-standard, alternative optics is permitted, provided that it has passed certification, otherwise the car may be “wrapped up” during technical inspection. But the installation of LEDs in standard optics is allowed if the manufacturer allows it, that is, when the optics are initially designed for diodes, then they can and should be installed, but if not, it is prohibited. You yourself can easily replace halogen lamps with xenon ones. Xenon can only be installed in special headlights, the markings of which begin with the letter D - this is important. You cannot place xenon in headlights whose markings begin with the letter H, as you risk blinding oncoming drivers. Factory xenon headlights include not only gas-discharge lamps, but also a special design of light diffusers and are complemented by an automatic corrector with sensors for body position and washers. It turns out if you equip the car with special equipment. optics, headlight washers and corrector, then it is quite possible to register such an alteration. And, of course, the owner should not worry if the xenon on the car is factory.

Everything is quite simple - look at what type of lamps were originally made, choose a place to install the ignition units, connect the ignition unit to the headlight switching circuit.

Engine and exhaust system

With the engine, everything is somehow ambiguous. And it seems that it has become an ordinary spare part and has ceased to be a numbered unit, but the engine model is entered in the title and the tax is paid according to its power. Therefore, when replacing a motor with another one, re-registration is required.

But there is no such control, the traffic police don’t check the serial number - you can put whatever you want. Of course, if a VAZ 2108 arrives with a V16 engine, it will be noticeable to the naked eye, but if the engines are similar in appearance, hardly anyone will be able to tell the difference. The engine can be legally installed if the car has a certified version with it from the manufacturer. For example, if you are the owner of a 41st Muscovite with a Ufa or VAZ engine, you can install a two-liter Renault F3R instead, since the plant produced such modifications. Otherwise, the traffic police will require you to obtain a certificate, which is quite expensive and difficult.

Self-installation of turbines and compressors is prohibited. But there is an interesting point: traffic police inspectors don’t know the engine compartment of the foreign automobile industry well, so they may not see the turbine. In common foreign cars it is more noticeable, but it can be passed off as a “noise reduction device” or “injector design.” Aftermarket exhaust systems are illegal. Not long ago, during technical inspections they began to check the volume of the car, so owners of direct flow vehicles most likely will not receive a maintenance ticket. Although in our country this is a small problem.

Alternative optics

Besides the fact that alternative optics on a VAZ 2109 or 21099 are beautiful, such headlights are much more reliable than standard lighting fixtures.

Why do the headlights fog up from the inside and thereby spoil the appearance of the car? The fact is that glass allows moisture to pass through, as a result of which the contacts oxidize, and the lamp may simply burn out. Even if this does not happen, the glass will fog up, resulting in poor visibility on the road. Replacing the glass won't do anything. The result, if there is one, will only last for a short time.

Based on this, we can say that tuning the rear lights on a VAZ 2114 or 2109 and 21099, or the front lights, is more of a necessity than just an external change.

Alternative optics for VAZ 2109

Simple ways to improve your headlights. No complications

Reasons affecting lighting and how to improve headlights? This is the problem we will look at today in the article. Its relevance lies in the fact that modern cars are equipped with a fairly good optical system, but older cars cannot boast of this. These are the ones we will talk about today.

READ Replacing the VAZ 2109 heater motor

The quality of lighting depends on many factors, such as:

Methods and methods of modernization: How to improve headlights? Install headlight cleaner or replace internals. There is no algorithm as such; each case requires an individual approach.

A universal remedy for many old samples: waterproof sealant, a reflector that you think fits the optics, an artificial stand for adjustment.

Types of lamps

For rear and front lights, two types of lamps can be used:

• LED;
• xenon

As practice shows, LED lamps are most often chosen for rear lights. This is due to the fact that such lighting devices are much cheaper, but at the same time durable and economical.

In addition, we can highlight the following advantages of LED lights specifically for VAZ 2109, 21099:

• service life - at least 10 years;
• ergonomics;
• energy saving;
• response is 3 times faster than xenon.

Against the backdrop of all this, such headlights provide the optimal amount of light for the car. If you don’t want to change the rear or front headlights, you can tune the ones you already have. It should be noted that, unlike the front lights, the rear lights on the VAZ 2109 or 21099 can even be painted from the inside. It’s quite easy to make this a reality with your own hands.

Rear LED headlights

Comparison of xenon and diode headlights

The design of an LED headlight is much simpler than that of a xenon headlight, so low cost is added to the other advantages. Xenon lamps are a privilege of business-class cars, and despite their high light emission characteristics, their maintenance is very expensive. Just look at the cost of a separate ignition unit and control unit! In addition, when xenon headlights are on, they consume a huge amount of energy - when turned on at full power, they can drain the battery in just a few hours.

Xenon headlights

LED headlights have record low energy consumption. In addition, they are easy to install, lightweight and take up little space. A VAZ-2109 with diode headlights may not require maintenance for 10-15 years. In addition to all the advantages described above, LED headlights operate much faster than others. Considering all the positive qualities of LED lamps, in the future they are predicted to completely replace xenon and, especially, halogen headlights.

Necessary materials

First of all, it should be noted that regular spray paint will not work. This is due to the fact that the space inside heats up, and the paint simply slides off. To tune the rear headlights on a VAZ 21099 or 2109, you only need to use special paint.

A special substance for tuning headlights must withstand high temperatures. The cost of one such bottle does not exceed 500 rubles.

Car headlight tinting paint

General information about headlights

Lensed headlights VAZ 2109

VAZ 2109 headlight lenses today are already much more popular than ordinary ones, which are not even installed anymore. They consist, just like regular ones, of higher quality components. To verify the correctness of this statement, it is worth studying other types of headlights known today and which are competitors to lensed ones:

With a reflector or reflector, which is a concave mirror surface. Thanks to this element, such headlights form the necessary light beam. The best type of reflector is considered to be one that has a stepped structure. This reflector looks more like a faceted glass. Each segment of such a reflector is responsible for illuminating a specific part of the road.

• There are headlights with two reflectors. Such lights are called two-section and in them one sector is responsible for the low beam, the other for the high beam.
• Today in stores you can also find crystal headlights with a segmented reflector and transparent glass. Such glass does not become cloudy or scratched, and does not even change its color over time, like ordinary headlights that can turn yellow.

Lensed headlights for VAZ 2109

https://youtube.com/watch?v=19BpeNHJtpw

• Corrugated headlights are another type of reflector headlight. They come in glass with reflectors and corrugated glass. When trying to tune such headlights, problems may arise. There is no way to install xenon bulbs in them, and to install new lenses, you will have to grind the corrugation of the glass.
• The optics are modular, giving a completely different level of light. Suitable for all car owners who dream of changing the appearance of their car. Various types of modules are built into such lamps: for high beam, low beam and fog light. This headlight also includes headlights and turn signals.

Lensed headlights for VAZ 2109

Preparatory stage before painting

In order for the paint on the headlights to last for a long time, a preparatory stage should be carried out. The algorithm of actions is as follows:

• headlights are dismantled and disassembled;
• the additional turn signal reflector is removed;
• Using fine sandpaper or a special substance, chrome is removed from the surface of the lantern;
• primer is applied.

Please note that the primer must dry for at least one hour. The substance should be applied to the headlight of a VAZ 2109 or 21099 in 2-3 layers. Otherwise, the paint will simply peel off during use.

Preparing headlights for painting

Headlights do not shine well: what is the reason and what to do?

High-quality lighting is the key to a comfortable and safe ride, especially at night. Weak or uneven headlights can be caused by a variety of reasons. However, often even an inexperienced driver can diagnose the problem and solve it.

There are several situations when headlights do not shine well:

1. poor adjustment;
2. low voltage;
3. headlights are clogged;
4. the headlight glass is cloudy;
5. contacts are coming off.

One headlight is brighter than the other

There are cases when one headlight burns brighter than the other. This happens for the following reasons:

1. One headlight has loose contacts. It is necessary to disassemble to check all connections.
2. One of the headlights has mechanical damage. Such damage can only be eliminated by replacing the headlight.
3. There is dirt on the surface of one headlight. One of the simplest and most common causes of dim light. It can be fixed just as easily - wipe the headlight with a wet cloth to clean the surface.
4. Faulty light bulb. It is enough to replace the lamp with a new one.

Low beam headlights are dim

Current traffic rules oblige the car owner to turn on low beam headlights when driving during the day. Constant use of lighting increases the risk of breakdown. The reasons for the breakdown can be very different:

1. Problem with contacts. Most often, oxidation damages the headlight. It is necessary to check all the “mass” under the hood and additionally the console. Inspect the headlight terminals - they may come off the fasteners. To prevent future natural oxidation caused by moisture entering the contacts, treat them with silicone lubricant.
2. In most cases, cloudy headlights are the result of long-term use. And if cleaning the headlight does not help, it needs to be replaced.
3. Faulty headlight bulb. It is enough to replace the old one with a new one.

How to make your headlights shine brighter

Poor headlight adjustment leads to problems. The light is not directed directly at the road, but to the side. Many car owners are not aware that light can be slightly scattered. This occurs due to even unnoticed damage to the bumper. Visually it will seem that everything is in perfect order. It’s not difficult to check how the light is directed:

• You should drive your car at night to the wall;
• using, for example, a laser level or by eye, determine the discrepancy from the norm;
• make adjustments if necessary;

The video will help you adjust the headlights yourself

Painting process

The paint must be applied in at least 4-5 layers. It takes at least one hour to dry completely. After this, you can assemble the entire rear light.

At the final stage, you need to be especially careful when applying the sealant. The old one is completely removed. After this, the surface of the rear light is degreased and a new sealant of the appropriate color is applied.

If this protective substance is applied incorrectly, the taillight of the VAZ 2109 (21099) will fog up, which will lead to more serious consequences. In general, doing this yourself is very simple.

Advantages of lensed headlights

How to transform a VAZ-2107 with your own hands into an exclusive model using tuning
This is:

• Low power consumption.
• High luminous efficiency of the VAZ 2109 headlight lens.
• Complete security.
• Better visibility.
• High efficiency compared to other types of headlights.
• Effective light distribution.
• Clear cut-off line.
• The illumination of the road is much wider.
• The sides of the oncoming and passing path are clearly visible.
• Economical washer fluid consumption due to the smaller headlight area.
• Stylish and attractive appearance.
• Possibility of installing xenon bulbs.

Lens headlights for VAZ 2109

There are practically no disadvantages. You can only complain about the complex setup, but it is inevitable. Lenses should be adjusted to high standards. Safety depends on this, and one cannot argue with such things.

Pros of setting up such headlights

So:

• Adjusting the headlights is very important, because if there is even a slight misalignment or deviation in position, all this will lead to blinding oncoming drivers.
• Incorrectly configured lensed headlights significantly impair the visibility of the driver of the VAZ 2109.
• You can spend a considerable amount of money on setting up such headlights from specialists, or you can do everything yourself.

How to configure it yourself

The problem with an incorrectly adjusted lensed headlight is that it dazzles oncoming drivers to an even greater extent than in the case of conventional headlights. The low and high beam beams coincide in height, which is a disadvantage in this case.

So:

• First, you need to heat the headlight housing around the entire perimeter of the glass with a hairdryer. This will allow the sealant to soften.
• The glass now needs to be carefully separated from the body.
• Remove the decorative reflector and low beam lens.
• We adjust the corrector drive leash so that it fits between the reflector and the lens body.

Further assembly is carried out similarly to dismantling, in reverse order.

Film tinting

If painting does not suit you, you can use tuning using film.

Here it is necessary to note the main rule: the better the quality of the film, the better the result. Therefore, in this case, savings are inappropriate.

Film can be applied to lanterns both outside and inside. But if you plan to cover the front of the headlight, you should understand that the film deteriorates much faster.

Film tinting of headlights

DIY black optics

Tuning VAZ headlights in black is done using matte paint, tape, and a knife. The optics are first dismantled and the headlight glasses are separated from the body. The reflector is sealed with masking tape. The inner surface of the headlight is coated with black paint. Do the same with turn signals. If the glasses of the last element are red in color, then they are replaced with transparent analogues.

The next step involves fixing the headlight glass with sealant. Such tuning does not have a negative impact on the quality of the light beam of the optics. If necessary, you can install and connect fog lights on 2109 yourself. This optics is designed to improve illumination of the road surface during snowfall, fog or rain. Such tuning is performed using the following materials:

• wire with a cross-section of 1.25 sq. mm;
• narrow and wide terminal;
• relay;
• PTF power button;
• 2 fog lights;
• optics installation kit.

The button is first installed and connected. Models 2109 with a high panel have a regular place for the button. The grille is dismantled. The speaker is unscrewed. The latest device has 2 connectors for connecting the PTF power button and an indicator for this power-on.

The plug is removed. A button is mounted in its place. Electrical connectors are connected. The speaker and grille are installed in place. Under the hood, the mounting block, presented in the form of a black box, is unscrewed. The next stage involves laying the wire from the fog lights and from the relay mounting location to the mounting block.

Connectors Ш7 and Ш8 are disconnected from the black box. To insert the terminals, use the electrical diagram. The connectors are mounted into the fuse block. The black box is installed in place. The relay is screwed to the VAZ body. The contact is cleared of paint. Power wires are connected to optics. To secure the headlights, you will need to make a hole in the metal insert. The bumpers of some models have a standard hole for fixing the PTF. Brackets are used for this.

The rear lights of the VAZ 2109 have a special design. Such optics are characterized by rapid oxidation of contacts and failure of light bulbs. Auto mechanics recommend buying tuned taillights, taking into account certain factors. First you need to evaluate the appearance of the product. Rear lights must have seals where the housing contacts the body. Otherwise you will need a sealant.

If the lantern is not sealed, then there are gaps in the joints between its parts. It is recommended to buy tuned flashlights with separate sockets for each bulb. Auto mechanics do not recommend buying tinted rear lights. The quality of light should not affect safety.

To install the upgraded taillights yourself, you will need to remove the plastic panels from the luggage compartment. The electrical connector is disconnected. The nuts intended for fixing the headlight to the body are unscrewed. New optics are installed and screwed to the VAZ body. The connector is connected. To seal the joint, a sealant is used.

Headlight adjustment diagram for VAZ 2109

The process of pasting headlights

The algorithm is as follows:

• the headlights are carefully dismantled and disassembled;
• The reflector is removed using an abrasive material or a special liquid.

It is recommended to cover the glass with masking tape to avoid scratching it during work. To make it easier to level the film around the edges, you can use a spatula that is not too sharp. It's a little more difficult to apply film to the taillights. The gluing process itself is the same. Only the preparatory stage is somewhat different:

• the battery is turned off;
• the wires that lead to the lighting fixture are disconnected;
• The flashlight itself is disassembled.

Only after this can the procedure described above be carried out.

Pasting car headlights

In general, tuning a VAZ 2109 (21099) with your own hands is a simple process that almost anyone can do.

But it also has several negative sides:

• significant deterioration of lighting;
• tinting is prohibited by law and is punishable by administrative penalties;
• possible problems during technical inspection.

Therefore, when doing such tuning with your own hands, you should understand and take into account these nuances. With the correct selection of materials and compliance with technical requirements, tuning, which was done by yourself, will not only add beauty to your car, but will also provide it with greater practicality.

What is the difference

Replacing the backstage of Lada 2109 (VAZ 2109)

Bixenon VAZ 2109

Having become widespread, headlights with xenon bulbs, or gas-charged ones as they are also called, today show off even in the optics of fairly budget car models. And what about budget ones, even a used car, the most used one, can be easily equipped with these light bulbs. First of all, such lamps ensure safety on the roads, because for normal traffic, not only at night, you need good and clear light. Imbued with the idea of ​​​​creating something unusual, xenon manufacturers came up with a way to increase the brightness of luminosity indicators in gas-charging lamps by as much as 3 times. As a result, xenon finds application immediately, eliminating all “competitors” and remaining a sales leader until bi-xenon comes out with its own characteristics.

Bi-xenon lenses VAZ 2109

Although the principle of glow in these two types of lamps is identical, they have differences that will be useful for the reader to know about. Let's first look at the features of xenon and then bi-xenon to understand the difference between them.

Xenon Features

So:

The set of xenon headlights includes high-power gas-charging lamps. They are also called HIDs.

Bi-xenon lenses for VAZ 2109

Bi-xenon lenses for VAZ 2109 BOSH

Bi-xenon and its features

So:

The complete opposite of halogen bulbs is bi-xenon. This type combines many advantages, including performing one function instead of two.

• Bi-xenon lamps use one gas-charging lamp, which works for both low and high beam.
• The low/high beam control in bi-xenon occurs due to the displacement of the lamp screen. In other words, the luminous bulb in the lamp itself moves.
• Bi-xenon, or rather its kit, costs more than xenon.

As a result, we draw the following conclusions:

Both of these lamps (xenon and bi-xenon) have the same principle.

Difference between xenon and halogen lighting

• Xenon lamps can be installed on both beams (high/low).
• Bi-xenon, on the contrary, is capable of combining both lights (high/low) in one housing.
• The bi-xenon is controlled mechanically, due to a moving element inside the bulb.
• Bixenon is more expensive than xenon, but is considered more versatile.

Tuning headlights for VAZ 2109

Every car enthusiast wants his equipment to become noticeable and original. You can upgrade any car, regardless of year and model. “Nine” is a popular car of the last century, produced by the Russian automobile industry. One of the reconstruction options is tuning the headlights on the VAZ 2109. The headlights on the VAZ 21099 and the headlights on the VAZ 2108 are the same.

Modernization of headlights

Car repairers believe that tuned headlights are more reliable than those installed at factories. Rework options:

• replacing standard optics with xenon;
• use of LEDs;
• covering lighting structures with tinted products.

Replacing lamps

Factory bulbs installed in a car do not last long. LED lamps have the following advantages over a conventional incandescent lamp:

• service life of at least 5 years;
• ergonomics;
• low power consumption;
• fast response.

At night, it is very important to have a good view of the road. Changing the optics often improves the light performance of devices. Xenon lamps are more powerful than diodes, but LED lamps are easy to maintain and have a low cost. Do not forget that unregulated xenon lamps emit a very powerful luminous flux. This can lead to a traffic accident, as the oncoming driver may be temporarily blinded by the bright light.

Painting

A common method of auto tuning is darkening the optics with a special varnish or painting. To complete the work you will need a can of black paint. Only materials with high temperature ratings are allowed. Regular paint will come off as a result of heating, and no tinting effect will remain.

The work is carried out in stages:

1. The headlight is removed from the car.
2. The optics are completely disassembled.
3. Using a curved screwdriver, unscrew the screws that hold the headlight mask.
4. The turn signal reflector is removed.
5. The chrome paint is being cleaned off.
6. Apply primer for plastic in three layers.
7. After the primer has completely dried, paint is applied (auto mechanics recommend applying paint in 5 layers.)
8. The structure is being assembled.
9. The headlight glass is cleaned of old compounds.
10. The glass is washed, wiped dry and treated with a degreaser.
11. Black sealant is applied along the edges.
12. The device is assembled and installed on the car.
13. The connection is made to the circuit through the fuse block.

If there is incomplete contact between the glass and the optics box, air may get inside, causing the headlights to fog up.

Film tinting

An inexpensive way to change the optics of a VAZ 2109 is to use a tint film. The result depends on the quality of the materials used. Good tint films have high light transmittance. This is an important indicator on which the lives of all road users depend. It is allowed to apply the film to the inner and outer surfaces of the headlight.

Applying a tinting film to the external surface is possible without removing the optics from the car. To do this, you need to prepare the surface: remove dust, dirt, the surface must be clean and dry. A notch is made and a piece of the required size is cut out. Soap and water are applied to the glass. The protective layer is removed from the film and applied to the headlight. The air is expelled. The surface is carefully wiped with a rag to remove any remaining liquid. This method is fast and simple. Even a car enthusiast who does not have special skills and knowledge can perform it.

When removing the headlight, it is recommended to handle the glass with care. It is allowed to seal it with masking tape to prevent scratching.

The tinting film is easy to remove. But tuning VAZ 2109 headlights with film has its downsides:

• peeling of the material after some time;
• reducing the brightness of the emitted light;
• violation of traffic rules, which may result in a fine;
• Difficulties in passing technical inspection.

Rear foot improvement

Tuning the rear lights of the VAZ 2109 is simple. You can do this operation yourself or contact a specialized auto center. Modernization of rear stops is often necessary even for factory optics: contacts oxidize, lamps burn out.

Several reconstruction options are possible:

1. Using LED overlays. LED strips can create a unique pattern and make a car stand out in traffic.
2. Application of diode rings. LED strips will allow you to define the hind feet and make them more expressive.
3. Tinting. You can tune car headlights using film or paint. It is worth paying attention to the characteristics of the material: it must withstand high temperatures.

Changing the appearance of a car is an interesting activity. There are many types of tuning known. It is important to always remember that a car is a highly dangerous vehicle. The driver should always have a good view and lighting in the dark.

Classification of car headlights

In order to properly navigate the many alternative optics options for passenger cars, in particular VAZ, we will consider the most common light sources.

1. An incandescent lamp is a tungsten filament placed in a sealed bulb made of durable glass. When heated, the metal filament emits tungsten from the surface and emits a beam of light. The disadvantage of such a light source is its short service life compared to other automotive optics. Over time, tungsten wears out and the lamp burns out. In addition, due to constant evaporation, the optics darken over time.
2. A halogen lamp differs from an incandescent lamp in that inside the bulb with a metal filament is halogen gas (most often I or Br). Thanks to the gas, the heating temperature of the filament increases, and the lighting capabilities of the headlamp are improved. In addition, a halogen lamp lasts many times longer than an incandescent lamp (up to 1000 hours).
3. A gas discharge lamp allows you to create a much more powerful design. Such lamps are also called “High intensity discharge” or HID. Illumination occurs due to the heating of gas under high pressure. HID lamps use xenon due to its maximum light output. The disadvantage of such a lamp is its high cost, because To operate such a device you need special equipment.
4. Light-emitting diodes or LED are the most efficient, long-lasting and bright lamp. An LED is a semiconductor device that converts electrical current into light. In recent years, diode lamps have become more popular than others due to their relatively low cost, bright light and huge service life - more than 3 thousand hours.

LEDs
The most common halogen headlights are gradually making way for LED ones. LED headlights have not yet become widely used, but their use reduces maintenance costs, their service life is much longer than others, and their energy consumption is the lowest. However, xenon headlights are still considered the most prestigious. Let's compare them.

Step-by-step tuning of VAZ-2109 headlights

Are you the owner of a VAZ-2109 and want to perform headlight tuning yourself? You will learn further how to do this. It is clear that any car owner wants to make his car special so that it is different and stands out among other cars, and it does not matter at all what brand of car we are talking about. And it is thanks to tuning that you can make your car unique. Now let's look at the nuances and elements of tuning VAZ-2109 headlights with our own hands.

If the appearance of the car is really important, then it is best to start tuning with optics. Headlights can fog up from the inside, which can also ruin the appearance of the car. This happens because the glass allows moisture to pass through, causing the contacts to oxidize and the lamp easily burns out.

Even if we take into account that this may not happen, in any case, due to fogging of the headlights, visibility on the road deteriorates, which increases the risk of an accident, therefore, tuned headlights are not just an external change, but also a necessity. For headlights and taillights, only two types of lamps are used:

• xenon;
• LED

In practice, LED lamps are most often chosen for taillights. And all because these devices are cheaper than xenon ones, but at the same time they are quite economical and quite durable. Here are the most basic advantages of LED lights for the VAZ-2109:

1. Energy saving.
2. Service life is about ten years.
3. 2 times faster response than xenon.

But xenon lamps can only shine with high beam or only with low beam. In order for them to fully illuminate both the high beams and the low beams, you need to install bi-xenon there, and this is already quite expensive. If you prefer to drive at night, then, of course, it is better to install xenon lenses; they are mounted in different groups of sockets for car lamps.

To install such lenses, you will need to remove the outer glass, and then install the lens. But if you drive more often during daylight hours, then it is still better to install LED ones with an increased service life and good light. After listing all this, it seems that such headlights are the best option for a car, since they provide a sufficient amount of light. However, if you don’t want to change the front or rear lights, then it’s better to tune the ones you’re already using. If you still decide to change, then you need to be extremely careful so as not to fall for any kind of defect. A good-looking headlight does not mean high-quality work. The good news is that the rear lights on the VAZ-2109, unlike the front ones, can even be painted inside. Bringing this idea to life is quite simple.

Features of headlight adjustment

In order not to dazzle oncoming drivers, after replacing or repairing headlights, it is necessary to adjust the headlights. For this purpose, the car is installed on a flat horizontal surface five meters from a white wall or stand. A weight of about 75 kg should be placed on the driver's seat to replace the driver's weight. Markings are applied to the wall.

Markings on the wall for adjustment

The hydraulic corrector handle should be set to the “driver and front passenger” position. At the same time, the low beam turns on.

Each headlight needs to be adjusted. An unused headlight must be covered with a dense material that does not transmit light.

The headlights are adjusted using screws. Light spots need to be adjusted to the markings on the wall. The adjusted light must meet the following requirements: the upper boundary of the light spots must be on straight line N, lines A and B, located in the vertical plane, must pass at the intersection points of light spots C1 and C2 (video author - Vladimir Sharkhun).

Now more about the process itself

The important thing is that ordinary paint, which is sold in cans, is not suitable for this, because the entire space inside gets very hot, which is why the paint can easily slide off. For painting you need to use only special paint intended for this purpose. This substance must resist high heat as effectively as possible. The price of such a can is about 500 rubles. In order for the paint to serve you for a long time, you will need to prepare for painting in stages:

• the headlights need to be dismantled and then disassembled;
• then you should remove the additional reflector for the turn signal;
• remove chrome from the lamp with fine sandpaper;
• apply primer.

The primer must dry well; this will require waiting at least an hour. Special paint must be applied to the headlight in 2-3 layers, otherwise the paint may simply peel off. After this, it will take time again for the paint to dry completely, this will take about one hour.

Once the paint has dried well, you can completely assemble the rear optics. You need to approach the application of sealant with special responsibility. The old sealant must be completely removed, then the tail light must be degreased and the new sealant must be applied directly. This must be done carefully, since if the sealant is applied incorrectly, the headlight may fog up, which can lead to serious consequences.

It's also a good idea to install a set of strip LEDs or apply tint instead of painting. There is no need to save on film, since in this case the quality of the film is of great importance. It can be applied both from the inside and outside, but if you paste it on the outside, it is clear that the film will deteriorate faster.

In general, tuning headlights is not a particularly complicated process, but if you are afraid of making any mistakes, of course, you can buy tuning devices. However, the tuning process itself is interesting; every car enthusiast would like to do everything himself, putting his soul into this matter.

Car with "angel eyes"

The clutch slips (“slips”) on VAZ 2108, 2109, 2109 cars

“Angel eyes” on the VAZ 2109 can be made with your own hands. Neon tubes are used for this. They are bent and mounted on the front optics. The mechanism is equipped with a special ignition unit. You can choose any glow color. Sealant is used to secure the rings.

To obtain a beautiful cross-section you will need LEDs. The ring is made from plastic sticks, which are heated with a hair dryer. The resulting material is wound onto a jar. The legs of the diodes are connected to each other using a soldering iron. The minus is soldered to the minus, and the plus to the plus. The LED legs are then soldered to the wires.

Nail polish is used to fix the diodes. The product is applied to the ends. Varnish is used to ensure reliable fastening of the diodes and good contact of the stick with the previous element. For “angel eyes” with “eyelashes” you will need to make a notch along the entire length of the sticks. A distance of 10 mm is maintained between the “cilia”. Their depth is 5 mm.

To install angel eyes yourself, you will need to disassemble the optics housing and remove the glass. The surface of the reflector is cleaned of debris and dirt. It is recommended to use cotton swabs for this. This kind of work cannot be done using chemicals. It is forbidden to touch the surface with your hands. A sealant is applied to the glass. The rings are installed in place, with the LED elements at the top. Then the wires are laid. The notches on the ring are directed outward. Silicone is applied between the glass and the headlight. This product dries in 30 minutes.

Power is connected to the optics. To do this, the plug is disconnected. The last element is designed to include dimensions and turn signals. Their male connectors are connected to each other. The structure is connected to the “mother” of the direction indicators. The “plus” from the headlights is connected to the free “female” connector. A negative wire is connected to the turning light mounts. Installing xenon on a VAZ 2109 provides the best possible result if the car is equipped with lenses.

Tuning the rear lights of the VAZ 2109 is one of the most common modifications due to its simplicity and a huge selection of offers from manufacturers of tuned optics. Moreover, in standard flashlights, due to the design features, the contacts often oxidize, and the bulbs begin to go out, or due to a short circuit to adjacent tracks on the board, the dimensions or brake lights begin to wink in time with the turn signals. But if you decide to replace the standard rear optics with tuned ones, you should not rush to make a choice. Unfortunately, most commercially available taillights made in China and Turkey have nothing in common with high-quality accessories from well-known companies. In this regard, I will give some tips on choosing rear tuned headlights.

• We evaluate the overall appearance of the product. Nothing should hang out, creak or slurp.
• Check the rear lights for the presence of seals where the headlight housing contacts the car body. If there are no seals, you will have to use sealant, otherwise a puddle of water will accumulate in the spare wheel niche in the trunk, which has penetrated from the street into the gap between the headlight and the body.
• Check the lantern itself for leaks. Leaks are indicated by the presence of gaps in the joints between the parts of the lamp, often between the glass and the headlight housing.
• It’s good if the headlight has separate sockets for each lamp, such a lamp will not have the disadvantages of a standard headlight.
• It is not advisable to use tinted taillights. The light of such headlights is barely visible in sunlight, and if the person driving behind you does not see your brake lights in time, you will only have yourself to blame. Let me remind you once again: tuning should not worsen safety!
• Be prepared for the fact that the glass of the rear taillights is much more susceptible to aging. The seemingly non-standard rear optics can be compared to worn plexiglass. High-quality domestically produced headlights are less susceptible to this effect.