Seats for VAZ 2107 - which ones are suitable and what is better to choose

Experienced car enthusiasts remember our Soviet automobile industry. Domestic cars did not differ in comfort compared to foreign cars, including the VAZ 2107. Although this Zhiguli model was considered the best.

Constructors and designers of the Volzhsky Automobile Plant have developed a more equipped and more attractive almost luxury car.

The radiator grille, headlights and taillights, and bumpers gave a certain chic to the new Lada. Inside the cabin, the seats were striking. Very comfortable, beautiful.

The headrests are made in a single body with the backrest. The rear seats had a folding armrest in the middle.

But there are significant drawbacks: the soft part of the seat upholstery wears out quickly and the seat adjustment mechanisms often fail.

Car owners, during operation, repair seats or replace them with comfortable foreign-made seats.

In this article, we will look at options on how to repair old seats and from which foreign-made cars you can install used seating products.

STANDARD SEATS VAZ 2107

The “seven” has more improved seats compared to its previous brothers. The main elements are:

  • frame – steel welded structure;
  • seat cushion – layered polyurethane foam, trimmed with fabric upholstery;
  • back - the soft part is made like a pillow.
  • mechanism for adjustment.

The metal frame of the back and the lower part of the front seats are connected to each other by hinges. This makes it possible to set the optimal angle between the seat and backrest for a comfortable position for the driver and passenger. The wings on the sides keep the driver from moving to the side during maneuvers.

The back height is designed for a person of average build. The headrest is built into the backrest, and they form a single unit.

The bottom of the frame moves on a slide with a locking mechanism. The slides are attached to the body shell. The seats can be moved back and forth, establishing the optimal distance between the driver and the steering wheel, the passenger and the dashboard.

The rear sofa has undergone virtually no changes. To improve comfort, a folding armrest was made in the middle.

WHAT SEATS CAN BE SUPPLIED?

And yet, no matter how you judge it, the seats of the VAZ 2107 are far from world standards. Many car enthusiasts, after a certain period of using their car, try to choose seats from foreign cars that suit them. Fortunately, there are many options available nowadays.

In order to choose seats for your “seven”, there are many factors that need to be taken into account. One of the main factors is price. It may happen that new imported seats will be comparable in cost to the car on which they want to install them. It’s better to refuse this and choose a used one for analysis. There you can always find high-quality seats in good condition and much cheaper.

The seats of the first foreign car you come across may not be suitable, for this you need to meet some conditions:

  1. Dimensions, they should not differ from standard products.
  2. Fastenings. The brackets must fit the installation locations so that they can be attached without modifications.
  3. The shape of the chairs and the type of upholstery depends on the taste of the owner. In any case, no matter what foreign car seats are installed on the Lada, they are still more comfortable, safer and more beautiful than the standard ones.

Racing

These seats are used by racing drivers and are made of durable plastic as a one-piece structure. They are adjusted individually to the pilot's build using a set of special inserts.

Very expensive, rare car enthusiasts buy for domestic classics. It is inconvenient to get in and out of such chairs. When driving long distances, the plastic seats provide little pleasure. If the car is not racing, it is better not to install these seats.

Sports

Unlike racing seats, sports seats have an adjustable angle between the backrest and the cushion. There are shoulder supports and devices to support the hips and back. Very comfortable and convenient seats with a four-point seat belt.

There is a peculiarity, it is better to use if the car has a hard suspension, or if the car has a soft suspension when driving long distances, it is not comfortable. Anatomical or ultra-comfortable

When driving for a long time in regular standard seats, the physical condition of the driver worsens, especially if he is older. Pain appears in the back, joints, and muscles. This results in fatigue, fatigue and loss of concentration, which affects driving safety. To avoid this situation, it is necessary to replace simple seats with anatomical ones.


A wide range of adjustments allows you to adjust the chair to any person with any anatomical features. There are chairs with options: heating and massager.

There is no discomfort in such seats and driving a car is a pleasure.

Seats from foreign cars

A more budget-friendly option is to replace seats from used foreign cars. In the analysis you can find quite decent seats that will fit the domestic Lada. When installed, the comfort and design of the interior will significantly increase.

Not all foreign cars fit seats on the VAZ 2107, but there are brands that should be preferred:

  1. Toyota Corola E100 1993 release.

  2. Mercedes W210 1996 release.

  3. Toyota RAV4.

  4. Ford Scorpio.

  5. Mazda 6.

  6. Ford Recardo.

The dimensions of the front and rear seats, as well as mountings, are ideal for these cars; no modifications are required. They only improve the appearance, comfort and design of our domestic classics.

Seats from brands such as Fiat and Skoda are suitable in size for a VAZ 2107, but it is necessary to make several holes in the lower part of the frame and install additional fasteners.

In principle, if you have the desire and engineering thought, as well as a grinder, a drill and a welding machine, the range of foreign models can be expanded.

Video: Car seats, features of car seats

Which is better to choose?

Let's now look at which of the listed seats is best suited for your car. It should be borne in mind that a lot depends on the availability of a particular seat option. It is not always possible to find a suitable option in good condition and for the best price. It is important to understand that worn-out seats from a foreign car will have worse characteristics than “Zhiguli” ones; take this into account when choosing.

If you have a junkyard nearby where old German cars constantly appear, then you are very lucky. Surely you can find seats from the Mercedes W210. They are not very popular among drivers of modern foreign cars, but they are ideal for the VAZ-2107. Moreover, at showdowns they usually don’t ask for much for them. At the same time, buying such seats secondhand can cost a significant amount.

If you live in Siberia or the Far East, then you better look for Toyota Corolla seats. Usually in the eastern regions there are no problems with searching, which cannot be said about the European part of Russia. In any case, if you can find such seats, purchase them. Not only do they fit perfectly, but they also look really good in the salon.

The remaining options listed in the previous part of the article make sense to use only if there are no more suitable options. As a rule, their installation requires additional modification of the fasteners.

PS They forgot to mention that they are also suitable for Mazda 6. There is an option to look for them at a disassembly site, chances are high that they will be there.

REMOVAL OF FRONT SEATS VAZ 2107

The driver and passenger seats are removed due to their breakdown, in order to later be repaired or due to their replacement.

There is practically no difficulty in removing the seats. You need to have a little time and the necessary tools:

  1. 8 mm head.
  2. Extension.
  3. Ratchet with handle.
  4. 13mm wrench.

To dismantle the seat, you must:

  1. Move the chair forward as far as possible until it stops.
  2. At the back of the chair, the slide is bolted to the bottom with two bolts. They need to be unscrewed.
  3. Next, move the chair back until it stops moving.
  4. From the bottom left, in front of the seat, unscrew the left side of the slide with an 8 mm socket, like the bolts at the back. On the right, unscrew the right side of the slide with a 13 mm wrench (see photo).
  5. All. Dismantling is complete, remove the seat from the passenger compartment.

If there is a need to remove the second chair, the operation is performed in the same order.

INSTALLING A NEW SEAT

To install, you need to have new or repaired seats, standard or from a foreign model.

First of all, after removing the old seats, it is necessary to clean the dirt from the places on the bottom where they stood. If there is rust, clean it and coat it with an anti-corrosion compound.

Before installing non-standard seats, you should make sure that the fasteners match where they are based.

The above describes how to dismantle the chairs. Installation is carried out in the reverse order, but first the slides must be lubricated with a thick special lubricant.

Replacing seats

You can make the interior more comfortable by installing seats from another car model or special seats for auto tuning on the VAZ 2107. The latter are produced in various modifications, which allows you to choose a seat that suits the car owner.

You can install any car seats from foreign cars that are suitable in size in the VAZ interior. It should be noted that such a replacement requires welding to change the fastening design. During welding, it is necessary to protect the casing from sparks. If you don’t have a welding machine at your disposal, you will either have to be content with the available selection of car seats, or contact a specialist.

FAULTS AND REPAIRS OF FRONT SEATS

If you treat your car correctly and with care, the seats will last a relatively long time. And yet these are loaded nodes that sooner or later fail. Front seats break more often than rear seats. Main failures: wear of the casing or failure of the adjustment mechanism to perform its functions.

All this can be repaired independently in makeshift conditions.

The back does not lock and does not recline

The backrest does not recline or is not fixed; it can move back and forth without any effort. This is one of the frequent breakdowns in the seat adjustment mechanism of the VAZ 2107. It occurs due to the weakness of the unit that fixes the movements of the backrest lever. Driving a vehicle while sitting in such a seat is inconvenient and unsafe.

Repairing it yourself is not difficult. Below is described and shown how to do it step by step:

  1. The auto parts market sells a replacement product for the seat back fixation unit, called a “comb”. It is suitable for all classic Zhiguli models. When purchasing a “comb,” you should keep in mind that the parts for the right and left seats are different from each other.

  2. After dismantling and pulling the seat out of the car, it must be turned over, since the entire mechanism is located below.

  3. Disassembly of the mechanism should begin by removing the adjusting pin. To unscrew it, you need to remove the lock washer.

  4. Having freed the comb, carefully cut it off and clean this place on the seat frame with a grinder.

  5. We install the new comb in place and weld it to the frame. To burn the soft parts of the chair, you need to cover them with a wet cloth and put a thin sheet of galvanized iron or any other on top.
  6. Next, you need to check the correct operation of the fixation unit by assembling it. After making sure that the latch is working properly, finally weld the comb to the chair frame.

  7. After completion, we put the seat in place in the car interior.

Installing a reinforced seat clamp comb

The photograph clearly shows that the comb is made of weak metal and is not very durable; it will not last long. Craftsmen have introduced a new method of repairing the fastener. This is a reinforced comb installation. It is not sold in stores, so it is better to order it from a familiar turner. Can also be found at salvage sites for old cars.

Installation of this comb is much easier; there is no need to cut anything.

We straighten the old comb and boil it if there are cracks in the metal parts of the frame. We install the reinforced comb in place, align it with the adjusting pin and weld it. To avoid burning the soft parts of the seat, you need to cover them.

Repair of front seat slides

The slides are designed to move the chairs back and forth and lock them in the required position. The main reason for the failure of the slide is contamination of the guides, but there is also a breakdown of the metal components of the mechanism structure.

This mechanism consists of the following parts:

  1. Guides.
  2. Crawlers.
  3. Roller.
  4. Rubber roller ring.
  5. Constraint detail.
  6. Retainer latch.
  7. Locking the longitudinal movement of the slide.
  8. Seat back control lever.
  9. Backrest tilt adjustment rod.
  10. Spring.
  11. Locking pin.
  12. Backrest tilt mechanism handle.
  13. Handle for fixing the movement of the sled.
  14. Backrest tilt lock comb.

To make repairs or clean the slides, they must be detached from the seat frame. This is done in the following order:

  1. Remove the spring.
  2. Release the rod securing pin.
  3. Unscrew the slide from the seat body.

After this, clean and rinse the mechanism from old grease and dirt. Carefully inspect, if there are broken or damaged elements of the mechanism, they need to be replaced with new ones. After these manipulations, assemble the slide and put it in place, having previously lubricated it with a special lubricant.

Reupholstery of the front seats of VAZ 2107

A car serves a person for a long time and during this time the upholstery of the seats becomes dirty, “greasy”, or even torn. The driver and front passenger seats are most often affected by this. It’s too late to put on the covers; this should have been done earlier. In this case it is better to tighten it. There are no difficulties, the procedure is below:

  1. Remove the seats.
  2. Rip the upholstery at the seams.
  3. Carefully, so as not to spoil the foam, if it is intact, remove the old material.

  4. Using the old upholstery, using it as a stencil, we cut out new parts from suitable fabric.
  5. Inspect the chair. If there is damaged foam and broken springs, replace them.
  6. Collect patterns for new upholstery and secure with thread, glue and heat sealing.

Video: Replacing seat springs

Options

First, it’s worth considering which seat options can be used in the VAZ 2107. Here you need to take into account the mounting features, as well as the dimensions of the seats. After all, this item should not only match the fastenings, but also fit normally in the cabin. There are examples when the seat is too high or interferes with driving. Therefore, you need to make your choice very carefully.

Many drivers claim that seats from a 1996 Mercedes W210

release. Such seats can be seen in many “sevens”. Moreover, the owners claim that no modifications were required for installation. Everything fit into the fastenings, as if it had been specially designed.

You can install seats from a 1993 Toyota Corolla

. This option also does not need to be modified. We just install it, fasten it in the standard way, and move on. All fasteners fit perfectly.

If desired, you can install almost any seats from Skoda and Fiat. They are completely the same in terms of the size of the sled, as well as the main fastenings. But, there is one caveat. These seats have a slightly shifted center of gravity. Therefore, for greater stability and reliability of the resulting structure, it is recommended to add a couple of additional holes for fastening on each side.

No modifications

you can install seats with Volkswagen, but this option is practically not used in practice. The reason is that the seat height is too high, making it inconvenient for drivers to operate the car.

It is also possible to supply options from Peugeot and Nissan

. But there are a number of difficulties here. Installation will require a lot of reworking of the fasteners, which will take quite a lot of time. There may also be problems with seat settings.

REAR SEATS

The rear seats of the Zhiguli are the same as a sofa. On the VAZ 2107, a retractable armrest is made in the back of the sofa to improve the comfort of rear passengers. The upper and lower parts of the sofa are attached separately to the car body using clamps.

Rear seat removal and repair

It is better to remove the rear seats together. One on one side of the car, the other on the other side. The order of execution is as follows:

  1. Open both rear doors, take the cushion on both sides and with a sharp upward movement pull it off the latches.

  2. Move the pillow forward and take it out of the cabin through any of the doors.

  3. At the bottom of the seat, on both sides, bend the plates using pliers and pull the lower part of the backrest forward.

  4. Raise the backrest up until the hooks come out of the partition.

  5. Pull the seat back out into the right or left door.

All operations for installing the rear seats are performed in the reverse order.

The rear sofa is more durable than the front seats, but sometimes requires repairs. More often this is re-upholstery or changing springs. Car enthusiasts rarely try to repair sofas. It’s easier to exchange for a used one from a foreign car, which is much simpler and more comfortable to use.

Video: Removing the rear seat

Now you can find out the cause of the breakdown

Repairing a broken seat back

The backrest mount breaks due to a worn-out bracket, due to which the device moves, fixes and changes position. The bracket is the most vulnerable spot of the front seat of the VAZ 2107.

To carry out repairs, you will need a working comb.

Next you need

  • remove and turn the seat over. At the bottom of the pillow you will see an adjustment mechanism;
  • remove the retaining ring;
  • unscrew the adjusting pin;
  • prepare the place for welding by cleaning it with a grinder;
  • screw the pin into place;
  • weld the comb.

Before welding, remove the sheathing or place a galvanized sheet on it.

STANDARD SEATS VAZ 2107

If we compare the equipment and appearance of the VAZ 2107 with previous models, it looks much better. By creating this car, the Soviet auto industry tried to make a “luxury” model. This was noticeable in the exterior, as well as in the interior equipment. We will not dwell on all the differences, but will consider only the standard seats.

The difference between the “Seven” and previous VAZ models is that it has front seats with lateral support. The backrests have headrests made in a single body, whereas in previous versions the headrests were inserted into the backrest separately. The peculiarity of the rear sofa is that it has a folding armrest, which improves passenger comfort.


Standard front seats VAZ 2107

As in any other car, the seats of the VAZ 2107 have a complex design. They are designed to ensure maximum comfort and safety for all occupants.

The seat consists of the following main elements:

  • frame - is the base and is made of steel;
  • pillow;
  • back.


    The seat consists of a body, a backrest and a cushion

The frame of the front seats can be moved back and forth along special guides. To do this, press the lever and then move the seat to the desired position.

The backrest and cushion of the front seats are hinged. It is possible to set a comfortable backrest angle. The height of the backrest is designed to provide reliable support for the shoulders of a person of average height. The presence of a headrest is responsible for supporting the head. The front seat cushions and backrests have side bolsters that provide a snug fit for the passenger and driver and also hold them in place during cornering. The cushion and backrest of the rear seats are rigidly fixed and there is no way to change their angle.

Springs are attached to the frame. The structure of the pillows and backs is layered. They consist of the following elements:

  • foamed polyurethane foam;
  • upholstery made of durable fabric. Covers can be used to protect the upholstery.

Let's sum it up

The procedure for installing more comfortable seats in the VAZ 2110 is quite acceptable. This is a good opportunity for every car owner to make their vehicle more comfortable, beautiful and enjoyable to use. But for this you need to find smart products and a good craftsman. Seats on disassembly do not always inspire confidence. Many of them are smoked, some have broken plastic adjustment knobs, frayed fabrics or altered shapes. Therefore, you should buy seats carefully, checking all the factors. It is better to agree with the seller that you will return the seat if it turns out to be of poor quality.

The process of installing a new seat on a VAZ 2110 is quite complicated. But the most difficult process will be the digestion of the fastener. If you entrust this work to a specialist, you will not experience any significant problems with further actions. The choice of chair is important. Don't go for the width of the back and leather trim. It is better to buy simple and practical products from a reputable manufacturer. Such products will serve you for a long time and will not cause trouble in the future. What kind of seats would you like to put in your car?

WHAT SEATS CAN BE SUPPLIED?

If we talk about the standard seats of the VAZ 2107, they cannot boast of originality and the fact that they provide an ideal fit. This can be explained simply: the VAZ is a budget car and the manufacturer’s installation of special expensive seats on it would cause a significant increase in the price of the car.

In addition, we must take into account that people have different weights and configurations. A seat that may be comfortable for one person may not be suitable for another. That is why, in order to improve the appearance of the car, as well as to choose the most comfortable seat for the driver, many car enthusiasts install seats from other cars on the VAZ 2107.

RACING

This is the most expensive option and is very rarely chosen for VAZ. Such seats are used by racing drivers, and their price can be comparable to the cost of a “seven”.

When creating such models, fiberglass is used. Their main feature is that the back and pillow have a one-piece design. To perfectly fit the seat to the driver's figure, special inserts are used.


The racing seat back and cushion are a one-piece design

Although the seat is highly durable and reliable and perfectly follows the driver’s figure, getting in and out becomes more difficult. The fact that the backrest and cushion are made of fiberglass makes driving on our roads unbearable. These seats can only be used if the car is racing.

SPORTS

If we compare racing and sports seats, the latter have backrest adjustment, as well as shoulder rests, hip and back support. They are quite comfortable, which allows the driver to drive the car comfortably. The sports seats are equipped with a four-point belt, which ensures high safety. It should be taken into account that sports seats are comfortable if there is a hard suspension; if it is soft, then such seats are not suitable for long trips.


Sports seats provide high safety

ANATOMICAL OR ULTRACOMFORTABLE

If you prefer a comfortable and slow ride, then you should choose anatomical seats. These seats provide a comfortable seating position and good torso support during sharp turns or sharp maneuvers.

They have different adjustments that allow you to customize the chair for a specific person, taking into account his anatomical features. There are models in which heating is installed, and they also have the possibility of vibration massage. This solution allows you to drive a car for a long time, and a person will not feel pain in the back, neck or lower back even during long journeys.


Anatomical seats provide a comfortable and comfortable fit

SEATS FROM FOREIGN CARS

Often VAZ 2107 owners install seats from foreign cars in them. There are many options, but the most commonly used are the following, as they require little or no modification:

  • seats from Mercedes W210 (1996);
  • Toyota Corolla (1993);
  • SKODA and Fiat.

Volkswagen seats fit well, but their disadvantage is that the seating position is high and therefore this solution is suitable for people of short or average height. When installing seats from Peugeot and Nissan, you will have to work hard, since their fastenings are slightly mismatched. To more securely fix a chair from a foreign car in the body of a VAZ 2107, it may be necessary to create additional holes.

Experts say that almost any seats can be installed on the VAZ 2107, the main thing is that they fit in size and it is possible to carry out welding work.


Seats from different foreign cars are suitable for VAZ 2107

VIDEO: TYPES OF CAR SEATS

Additional interior tuning

In addition to installing new seats, other modifications to the interior can be made, which will significantly increase the level of comfort. For example, many drivers connect heated seats to their seats. You can do this in several ways:

  1. Choose chairs with built-in heating function;
  2. Do the heating yourself.

Both options are quite feasible, so you can choose the one that suits you best.

Another fairly common modification is interior reupholstery. It is worth noting that the standard trim on the VAZ 2107 is not very sophisticated. Therefore, many drivers are trying to correct this shortcoming. This work is quite difficult, but if you have the right patterns, there won’t be any special problems with it.

Conclusion. Domestic “classics” do not have a high level of comfort. Therefore, it is often tuned, with an emphasis on increasing comfort. In this case, it is useful to know which seat is suitable for the VAZ 2107. This will allow you to make the right choice, as well as install a new seat in the cabin with almost no problems. In fact, there are quite a lot of options, but not all of them allow replacement without additional modifications.

If you find an error, please select a piece of text and press Ctrl+Enter.

REAR SEATS

Removing the rear seat back is very easy. It is attached to the car body using special hooks. It is enough to raise the back slightly up. After this, the clamps will disengage and it can be removed.


The backrest is lifted up and removed from the clamps

To dismantle the lower part, you need to take the seat from one side and sharply pull it up. This releases the spring clips. After this, do the same on the other side and remove the saddle.


Pull the seat sharply from one and then from the other edge, after which it can be easily removed

VIDEO: REMOVAL OF THE REAR SEAT

To a large extent, the comfort and convenience of the driver and passengers depend on the seats. That is why special attention must be paid to the choice of this interior element. You can always replace the standard seats of the VAZ 2107 with more comfortable and high-quality ones. Thus, not only the comfort and safety of people in the car improves, but also its appearance becomes more attractive.

Sources

  • bumper.guru/klassicheskie-modeli-vaz/salon/sidenya-na-vaz-2107.html
  • 7vaz.ru/remont/shtatnye-sidenya-vaz-2107-remont-zamena.html
  • ladaautos.ru/vaz-2107/kakie-sidenya-podxodyat-dlya-vaz-2107-bez-peredelok.html
  • drive2.ru/l/516198994959926336/
  • vazzz.ru/kakie-sidenya-ot-inomarki-podhodyat-na-vaz-2107-bez-peredelok/
Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]