Push-button car radio 281152186R (standard) for VAZ Largus

How to connect a radio

Connecting the head unit depends on the vehicle modification. When installing the radio, you need to firmly snap the ISO plugs in place, and then reinstall the antenna connector.

If the product is equipped with a wired remote control, it is located on the steering column or the front of the instrument panel. The wire is laid inside the panel along the standard lines of the electrical harnesses.

With 2 speakers

The 2-speaker circuit is used only on cargo vans; the loudspeakers are located in the doors under the plastic panels.

The radio is ready for use immediately after connecting to the standard connectors. The car owner can install additional speakers in the cabin by laying separate speaker wires to them.

With 4 speakers

On passenger versions, 4 speakers are used, which improves the sound quality in the cabin. The wiring has a separate harness leading to the speakers in the rear doors.

The connection does not require any additional modifications to the vehicle wiring.

No speakers

The layout without speakers is found on the basic configuration. The car has connectors for connecting the radio and front speakers, as well as an antenna output. After switching the radio, you need to disassemble the door trims, which will allow you to mount the speakers in their standard places.

Loudspeakers are attached to factory mounting points, and wooden adapter rings may be used. After installing the elements, it is necessary to return the removed parts to their place.

Installation of the radio. . . There is nothing complicated, you need to select the wires. I bought the wires on the white tower in the first boutique I came across, with music.

Read also: How to choose springs for Opel Astra H

In short, I subconsciously believed that there were some cheap speakers at the door.

In the hope that the music will play. . . Fuck you and not the speakers.

In the previous Largus I had four speakers and somehow I didn’t bother with it at all, the music was playing and I didn’t worry.

On the Lada Largus, audio preparation is present on all modifications, but a radio and speakers are equipped only as options on the “norm” and luxury trim levels.” Next, let’s try to figure out what the manufacturer understands by the word “audio preparation” and what connectors the standard Lada Largus radio has.

• Audio preparation of the Lada Largus includes an antenna with a cable, an interference suppressor, a wiring harness for the radio, a wiring harness for connecting the front door speakers. AvtoVAZ awarded this list to all Lada Largus configurations.
• The wiring harness for connecting the rear speakers (doors) is found on all station wagons and is missing on the van.
• The standard Lada Largus radio with CD-MP3+AUX+USB+Bluetooth+Hands Free functions is installed optionally on the “standard” and “luxury” trim levels.

On versions without a radio, a shelf is installed instead. If you remove the shelf, the wires for connecting the radio will be inserted into its rear part. One plug is used to connect power to the radio, the other to connect two front and two rear speakers.

It is worth considering that the connectors for the audio system differ from the usual ISO standard. Therefore, to connect a non-standard radio, you will have to use adapters, which have the name: car radio socket/adapter Renault Duster/Sandero/Logan > 2012 - ISO (euro).

Adapters will also be needed to connect the speakers in the car doors and the antenna (by the way, the standard speakers are 13 cm in size). The connector for the rear speakers should be found in the pillar behind the driver's seat (near the passenger's feet).

Read also: Do-it-yourself powder coating chamber

If there are no adapters for connecting a radio or speakers, you can cut off the connectors and connect the wires according to the diagrams presented below. However, in this case you will have to think about maintaining the warranty on the radio and the car.

How to install

Some cars come from the factory with a 1 DIN car radio with CD player. Basic versions are equipped only with audio preparation; a plastic plug is mounted instead of the head unit.

To install the radio on Largus with your own hands, you need to:

1. After removing the plug, place guide slides with locks in the instrument panel.
2. Secure the mounting assembly using the tabs located around the perimeter of the part. Bending is done with a screwdriver; the installed shaft should not vibrate or make any extraneous sounds.
3. Connect the ISO connectors located on the standard wiring to the head unit.
4. Connect the antenna plug to the socket on the radio. If the sizes and shapes of connectors and plugs do not match, appropriate adapters are used.
5. Insert the audio device into the shaft and push it until it clicks, indicating that the latches engage.
6. Install a decorative frame around the radio panel.

Some owners install 2 DIN size radios on their Lada Largus. To place the head unit, it is necessary to replace the front plastic trim on the instrument panel, since it is impossible to accurately modify the original one.

The front panel with an extended window requires modification - it is necessary to install control buttons for additional equipment on it, borrowed from the Renault Logan sedan; original elements from Largus cannot be placed. This is due to the fact that the panel is designed for oval-shaped keys, which were never used on Largus.

In the instrument panel, it is necessary to remove the horizontal jumpers located near the socket of the standard radio and climate control controls. Dismantling is carried out with a hacksaw and wire cutters, the remaining elements are cut off with a construction knife

All manipulations are carried out with caution, since there is a risk of damage to the standard electrical wiring. Then you need to reinstall the center console to assess the contact density of the elements

Since the original wiring has cables with colored insulation that does not comply with the ISO standard, it will be necessary to compare the assignments of each element on the car and the radio. An adapter is used for connection; wire switching is allowed by twisting the necessary cables. It is recommended to reinforce the joints with tin-lead solder or a metal connecting sleeve. The connection point is covered from above with a heat-shrinkable tube, which provides protection from moisture and short circuits.

Device characteristics

It can't be called complicated. In addition, the instructions and user manual supplied with the system will help you understand the structure, functionality and characteristics of the device. Structurally, a car can be equipped with either a conventional 1 Din or 2 Din radio. The differences between them are minimal and lie in the location of the buttons and inscriptions.

To reproduce high-quality sound, the audio system provides four speakers:

One of the main features and at the same time advantages of this device is the ability to connect to a smartphone via Bluetooth wireless channel. In addition to comfort and convenience, this function provides passive safety, since the Hands free system allows you to talk on the phone while driving without using your hands. The quality of communication is decent, communication with the interlocutor is not associated with difficulties, the driver does not need to raise his voice, and passengers hear him well.

The standard radio on Largus does not have much functionality and advanced capabilities, for some this is quite enough, but for others the characteristics of the radio are not enough. In terms of appearance, the device blends harmoniously with the standard car interior. All buttons and other controls are easy to use, and the inscriptions are easy to read and intuitive. The device is tightly fixed in the seat, there is no play or other defects.

Capabilities of standard audio device

Music in the car can be played both through removable media and via the Bluetooth wireless communication channel. At the same time, the genre of music does not matter, the sound quality remains at the proper level. To listen to radio stations, a standard antenna is provided, which can pick up even a weak and unstable signal. If necessary, you can save up to 6 radio stations in the device’s memory for quick playback, in each of the available bands.

The radio supports most popular formats, for example:

Via the Bluetooth channel, you can control playback, i.e. pause the song or rewind to the desired segment. For convenience, it is possible to display the artist of the song and its title on the monochrome display. The radio can also recognize Russian fonts.

There are several connectors for connecting removable devices:

The unit is also equipped with several inputs for playing sound through third-party gadgets. The panel of the standard head unit is not removable, but this is no longer considered a disadvantage, since most car owners store the removable panel directly in the car rather than carry it with them. The purpose of each button, which is quite small, usually does not cause any difficulties. It would be much more informative to consider here other hidden features that are not mentioned in the detailed user instructions.

“Secret” menu of the Lada Largus radio

To go to the section with individual settings, use the SET button located on the front of the radio panel. Not every car owner knows that this button has hidden capabilities. Just press this key and hold for 6–7 seconds. The device will go to the engineering menu, where a number of special settings become available. The instructions included with the standard radio contain no information about such a tab.

The “secret” menu opens three sections (“Diagnostics”, “Configuration”, “Radio Monitor”). On the right is a rotating knob, which allows you to navigate up or down between these sections. To select the desired one, press the handle. To go to the previous level, press the “Back” key, which is located to the left of the rotary knob.

In the “Radio Monitor” section you can see the current frequency at which the received signal is located and some other data. In the “Diagnostics” section there is an additional subsection with the items “Autotest”, “Monitor” and “Errors”. The “Errors” block was created to inform the driver about existing problems in the BC (on-board computer). If there are no problems, the display will be blank. The “Autotest” item contains information about the current state of the equipment (OK on the screen means “functional equipment”).

Precautions for use

For safety reasons and to avoid property damage, be sure to follow the instructions below when using the system. Strictly comply with the applicable laws of the country where you are located.

Precautions when handling the audio system:

• Use the controls (on the dash and on the steering wheel) and read the on-screen information when driving conditions permit.
• Adjust the sound volume to a moderate level so you can hear surrounding noise,
• Precautions to Avoid Equipment Damage
• To avoid property damage and fire, do not disassemble the system or make any modifications to it.
• To troubleshoot or dismantle the audio system, contact a representative of the manufacturer.
• Do not insert foreign objects, damaged or dirty CD/CD MP3 into the player.
• Use only round CDs/MP3 CDs with a diameter of 12 cm.
• When handling discs, hold them by the inner and outer edges without touching the surface of the MP3 CD/CD.
• Do not stick paper on CD/CD MP3,
• When using for a long time, carefully remove the MP3 CD/CD from the player as it may be hot.
• Do not leave the MP3 CD/CD near heat sources or in direct sunlight.

Precautions when using your phone:

There are laws regulating the use of phones in a car. Some laws prohibit the use of a hands-free phone system while driving; the driver must remain focused on operating the vehicle. -Telephone conversation while driving is a distracting and dangerous factor at all stages of using the phone (dialing a number, making a telephone conversation, searching for a number in the phone book...).

Front panel care:

• Use a soft cloth and, if necessary, a little soapy water. Rinse with a damp soft cloth and wipe with a soft, dry cloth.
• Do not press on the system panel screen or wipe it with alcohol-based cleaners.

This instruction manual contains descriptions of models based on their technical characteristics existing at the time of writing. The manual covers all types of equipment installed on vehicles of this model. However, its availability on your car depends on the configuration, selected options and country of delivery. Also in the manual you may find information about the equipment that is supposed to be equipped with cars over the next year,

In this manual, when referring to a manufacturer's representative, the manufacturer refers to the vehicle manufacturer.

Radio malfunctions and methods for diagnosing them

As you know, the Lada Largus is equipped with an audio system with a set of speakers already from the factory (depending on the configuration). The amplifiers are located in the front and rear door panels. To connect non-original speakers, several wiring harnesses are provided (including for increasing power using an amplifier when connecting a subwoofer). Since the connector plugs do not comply with the current standard, to connect another head unit you will need to additionally purchase adapters.

A standard car radio sometimes brings not only the pleasure of listening to music, but also some problems. The device may not work or function incorrectly for various reasons. In general, the list of faults includes only those that an ordinary driver (without special knowledge of electrical engineering) can fix with his own hands, without the need to contact a specialized center.

When it comes to repairs, it can often be cheaper to replace the device. Especially considering the availability of alternative options in different price categories and with different capabilities. At a cost of no more than 6,000 rubles, repairs can cost half this amount.

Main problems

If, when you press the power button, the head unit does not respond and does not turn on, then first of all you should pay attention to the mounting block, checking the 15A fuse in socket F28. Through it, the electrical circuit of the device’s memory is connected with the saved settings.

The mounting block cover is located on the front panel on the left side at the end. You can understand that this fuse has blown by the absence of signs of operation of the instrument cluster panel, interior lighting and trunk lighting, since their electrical circuit is also powered by F28. If the fuse has not blown, the next check point will be the condition of the connecting contacts and the integrity of the wire that goes from the fuse to the A4 power connector on the back of the radio.

In this case, the fault may also be the fuse, but F38. It supplies power to audio output devices. A faulty fuse is also indicated by a non-functioning cigarette lighter. If the latter works, then the fuse is intact. The lack of sound can also be caused by a violation of the integrity of the wire running from the fuse to connector A7 on the radio. And if only the rear speakers do not work, the culprit may be a broken connection in the block, which is located directly behind the driver's seat between the front and rear doors.

The cause of the malfunction may be the absence of ground - this is the black wire going to the radio (terminal A8). In all other cases, intervention in the electrical circuits of the device will be required. Without appropriate knowledge in this area, there is a high probability of complete failure of the radio. When contacting specialists, repairs can cost at least 1,000 rubles, not counting diagnostics.

Removing and installing the radio

If a device fails, you will need to dismantle it to install another one. Removal will also be necessary if it is necessary to connect speakers, repair, clean terminals or reflash. Visually, there are no latches or keys for removal on the front panel.

In fact, on the front of the radio there are four holes into which you need to insert 4 rods of suitable diameter (about 2 mm). The dismantling process is as follows.

1. Two rods are inserted into the holes on the left side.
2. Two more - on the right.
3. Now you should simultaneously press all the rods at once.
4. At the same time, pry it with a suitable plate, for example, a plastic card.
5. After characteristic clicks indicating that the latches are loosened, you can remove the device.

CD/MP3 playback

Characteristics of playable formats

Only files with the MP3/WMA/MC/WAV extension can be played on the system.

If a CD contains both regular CD audio files and compressed audio files, the system will only play normal audio files.

Note. Some protected files (copyright) may not be readable.

Note. For ease of reading, we recommend not using special characters in directory and file names, and also try not to exceed their maximum length of 64 characters.

CD/CD MP3 care

Do not leave MP3 CDs/CDs near heat sources or in direct sunlight as they may deteriorate.

To clean MP3 CDs/CDs, wipe them with a soft cloth from the center to the edge of the CD.

In general, you should follow the manufacturer's recommendations for storing CDs.

Note. Some scratched or dirty CDs may not be readable.

CD/CD MP3 input

See "Precautions for Use" section.

Make sure there is no CD in the player, then insert a new CD with the printed side facing up.

CD/CD MP3 playback

When loading a CD/CD MP3 (text side up), the audio system automatically switches to CD/CD MP3 playback mode and starts reading the first music track.

If the audio system is turned off while the ignition is on, loading a CD/CD MP3 will turn on the audio system and start playing the CD/CD MP3. When the ignition is turned off, the audio system does not turn on.

If the radio is on and a CD/CD MP3 is in the player, you can select to play the CD/CD MP3 by pressing button 13. Reading begins when the system switches to the CD/CD MP3 source.

Track search

To switch from one audio track to another, briefly press button 10.

Fast playback

Hold button 10 to fast forward or rewind.

Disc playback will continue as soon as you release the button.

Playing tracks in random order (MIX)

After placing the CD/CD MP3 in the player, press and hold button 4 on the keyboard 7 to activate the random playback mode of all CD/CD MP3 tracks.

The MIX indicator lights up on the screen. The tracks will be played in random order. The transition from one track to another will occur in random order. Press button 4 again to turn off random play mode, the MIX indicator will go off.

This function is not disabled when the car radio is turned off and the source is changed.

In contrast, when a CD/CD MP3 is ejected, shuffle mode is automatically disabled.

Note. On MP3 CD, shuffle will only be applied to the active directory. Change the directory to play the files it contains in random order.

Pause

Press button 17 to instantly turn off the sound. This function will turn off automatically when there is any change in sound, when switching audio devices and when automatic information is received.

Display text information (if available) (CD-Text or ID3 tags)

Press and release button 5 on keyboard 7 to display ID3 tag information (artist name, album name, or song title). To display all SW tag information on one page, press and hold button 5 on keyboard 7. To cancel the function, press button 9 again.

Note. After a few seconds of inactivity, the system will automatically return to the previous menu.

CD/CD MP3 extraction

Eject the MP3 CD/CD from the player by pressing button 3.

Note. If you do not remove the ejected disc within 20 seconds, it will automatically return to the CD player.

Firmware for audio device on Lada Largus

The standard head unit on cars of this model does not look very presentable, but at the same time the functionality is complemented by a large number of possibilities. Unfortunately, despite the decent quality of the technical part, the manufacturers did not pay enough attention to the software. It's no secret that modern audio systems have a full-fledged electronic control unit, which is a kind of computer. There is a processor, devices for reading removable media, various connectors and other functionality. In addition, the standard radio is combined with the on-board computer.

On the other hand, the more complex the audio system, the greater the likelihood of failures and malfunctions. The radio installed on the Lada Largus is no exception to the rule. The software has not been properly tested, so malfunctions are not uncommon. The most common problems are the inability to recognize the file format, reproduce high-quality sound, or identify the removable storage device. Also on Largus, incorrect display of Russian fonts on the display is often encountered. As a result, instead of the usual Cyrillic alphabet, the driver sees incomprehensible symbols. It is in these cases that updating the device firmware will help solve the problem.

Where to download and how to install

You can find out the firmware version directly on the device case, on the back side. The manufacturer regularly releases updated, i.e. improved firmware. You can find them either on the official website of the developer or on specialized thematic forums. If necessary, please contact your authorized dealer.

Preparation for the procedure

A firmware update may not be necessary if you try to reset the current settings to factory settings. The procedure is simple, but in most cases ineffective. If you update the firmware to a new version, you can expect a significant improvement in device performance. Typically, an official update is released rarely and always turns out better as testing is done and bugs are fixed.

Updated version V2030 released in 2022. To install, you will need a flash drive or adapter with other removable media. Before you begin the procedure, you should prepare the media and find the appropriate firmware. You can download the firmware on the official AvtoVAZ website or on thematic official forums for Renault cars.

The file with the firmware is in the archive, so you need to first unpack it into a separate folder on your PC. The unpacked firmware provides a special archive that does not need to be unpacked further. The flash drive must be clean and formatted in FAT format. The unpacked CAB firmware archive is placed on it.

Update process

Now you can connect the media to the radio in your car.

1. Before starting the procedure, be sure to turn on the ignition. Otherwise, the radio will automatically turn off and the firmware process will be interrupted, which may lead to device failure.
2. When reading information on the media, the radio will determine that the contents on the drive are material for flashing. After analyzing the information, the device will offer to update the software. You should select "Yes" to refuse to click "No".
3. Confirm the information by clicking the “OK” button.

Why do you need a PIN code?

A head unit is equipment for playing music and more, which is purchased along with the car. Some cars are sold without a radio, but this is a rare situation. The radio may break during operation and will have to be repaired, possibly replaced. Of course, the stock radio should work for a long time. But this is not a car, a more fragile part.

There are a lot of electronic elements in the radio. It consists of boards. It has an operating system. Don't expect it to work as long as the car. Contacts oxidize, destroy, melt. Overheating, dust, hypothermia, moisture - anything can cause a breakdown within six months or a year after use. There are cases when the radio tape recorder works even longer than the car. However, you need to prepare for the worst - you will have to tinker with it. This is why you need to know the code.

Without it, any actions or manipulations with the radio will be blocked. A corresponding request will appear on the screen. Only by entering the PIN code will you be able to continue making settings and fixing problems. Finding out the radio code is not an easy task. How to do this?

Connection diagram

The procedure for connecting the car radio may differ slightly due to the modification of the car. The audio device sometimes comes with a remote control. It is installed on the steering column or the front of the dashboard. The cable is laid along the length of the electrical harness lines.

The exact wiring diagram may vary due to the number of speakers. Therefore, it is advisable to remember the following information:

1. With 2 columns. Two loudspeakers are used exclusively on trucks. Speakers are most often placed in doors under plastic panels. After installation, the radio can be used immediately for its intended purpose. You just need to connect it to the sockets. You can install other speakers in the cabin. Then you will need to lay a separate speaker cable.
2. With 4 speakers. In passenger versions, a device with two pairs of speakers is more common. The electrical wiring contains a special harness connected to the rear door speakers. Connection does not require any modifications to the vehicle wiring.
3. There are no speakers. The scheme is typical for the basic configuration. The car has connectors for connecting the device and front speakers. Additionally there is an antenna output. When the car radio is connected, you need to disassemble the door trim. This step will help you get the speakers in place.

The speakers need to be fixed to the factory points. You can use wooden adapter rings. After installing the parts, the removed elements must be returned to their original place.

Connecting additional audio devices

The system has an additional input for connecting an external audio device (USB flash card, MP3 player, iPod, Bluetooth player...).

There are several options for connecting the player:

• USB connector;
• Jack connector;
• Bluetooth connection.

Note. The device can play MP3, WMA and AAC formats from additional audio devices.

Auxiliary input: USB connector

Connect your iPod or USB flash drive to the USB auxiliary input.

After connecting the device connector to the USB port, track playback will start automatically.

Note. When you turn on the system for the first time, disc playback will start from the first track in the first directory of the device. In other cases, playback will start from the last played track (if you connect the same device twice in a row).

Note. Once connected to the audio system, you will no longer be able to control playback directly through the digital player. The device can only be controlled through the audio system.

iPod:

Once your iPod is connected, the available audio menus will appear on the screen.

The system will save playlists identical to those on your iPod.

USB flash drive:

The first audio file in the first directory of the USB flash drive will start playing automatically.

While in the tree menu, you can switch the track or directory by turning and pressing the 11 button. When you are in any other menu, turning the button will not change anything.

Note. To enter the device menu (iPod or USB flash drive) while playing a track, press button 9 or 11.

Note. Shuffle playback for a USB flash drive is the same as for an MP3 CD. See section "Playing CD/CD MP3", item "Playing in random order (MIX)".

Auxiliary input: Jack connector

Using a special cable (not included), connect the auxiliary input Jack 15 to the player's headphone jack (usually a 3.5 mm jack is used).

Note. You cannot select a track directly from the audio system. You can only select a track using the player when the car is stopped.

The text “AUX” will be displayed on the system screen. The artist name or track title is not displayed.

Auxiliary input: Bluetooth audio playback

To use a Bluetooth music player in a car, you must first establish a connection between the player and the audio system. The connection will allow the audio system to recognize and remember the Bluetooth player.

Note. If your Bluetooth digital device has telephone and audio player functions, connecting one function will automatically connect the second function.

Activate the player's Bluetooth connection (see the player's operating instructions).

Select the Bluetooth audio device by pressing button 13, or turn and press button 11 to confirm.

Enter the Bluetooth playback menu.

Note. When the AUX device is disconnected, the system will automatically return to the previous menu.

Set up your portable audio device when traffic conditions permit.

Hide the audio player while driving (it may fly forward during sudden braking or impact).

To gain access to all functions of the player, it must be connected to the system.

Note. The player cannot be connected to the system without first connecting.

Once connected, the Bluetooth digital player can be controlled directly from the audio system.

Press button 11 to pause while an audio track is playing (pressing it again will resume playback).

Depending on the device type, press button 10 to fast forward or rewind.

Note. The number of available functions depends on the type of player and its compatibility with the audio system.

Note. If you encounter connection problems, read the player's operating instructions.

Radio in action

It is clear that there is no friend for taste and color, as they say. Some people like the standard audio system, but others don't like it at all. Let's figure out what Lada Largus owners actually acquire along with the car.

Visually, the design of the radio tape recorder fits perfectly into the interior of the cabin. Its buttons and controls are quite convenient, and the symbols are intuitive. No loosening, backlash or failures are observed. Everything is adjusted very clearly.

Music in Lada Largus via Bluetooth:

As for playback, any genre of music will sound great. If you want to listen to radio stations, then an excellent antenna allows you to catch the signal even where it is too weak. It is possible to save certain radio stations in the amount of 6 stations in each band.

You can listen to music from existing CDs, flash drives, or simply from your phone or player via Bluetooth. The audio system reads formats such as CD, MP3, AAC, WMA and WAV. If this is Bluetooth playback, then pause and rewind control is available not only in albums, but also within songs.

The charge indicator of the Bluetooth device is visible on the display of the radio. There is also RDS - this is when the title of the song and its artist are displayed on the display. The device understands Russian fonts in ID Tag. The audio system has several options for connecting additional devices: Jack connector, USB connector and Bluetooth connection.

The radio has various inputs for reading music from external devices

Many car enthusiasts are not happy that the standard radio panel is not removable. However, there is nothing to worry about, because drivers often store the removable panel of their audio systems directly in the car, either in the glove compartment or under the seat. Therefore, if someone decides to steal a radio, it is unlikely that the main criterion when choosing a device will be the absence of a removable panel.

Summarizing all of the above, we can conclude that the standard radio in the Lada Largus car is quite good. It has a sufficient number of functions so that drivers do not have any difficulties when using it. And detailed instructions will help you easily master all the capabilities of this audio system.

The principle of operation of the radio

You can't please all people. Some people like the original standard audio system that comes with a new car, while others want a more advanced option. So what is it like - the original Lada Largus radio? The appearance harmonizes very well with the interior design. Convenient control buttons help you quickly figure out what to press or scroll where. The radio tape recorder fits into its proper place tightly and without unnecessary play. The sound is also good, music for every taste sounds excellent and clear. The radio picks up the signal well, even if the reception is so-so.

Specifications:

Equipment:

• Car radio Farcar LY832
• Fastening in the seat
• GPS/GLONASS Antenna
• RCA tulips
• Microphone
• 2 USB connectors
• Instructions
• Warranty card

System Setup

Display text information received via radio

Enter the menu of text information received via radio by pressing button 12. Select “Radio” and press button 11.

Only information of no more than 64 characters can be displayed on the screen.

Note. If there is no information, the message “No messages” is displayed on the screen.

Audio settings

Enter the settings menu by pressing button 12. Select “Settings”, then press button 11 to display the audio settings menu. Select Audio to access the different sections in the following order:

• low sounds;
• high sounds;
• distribution (sound distribution to front and rear speakers);
• balance (sound distribution between left and right speakers).

You can change the selected parameters of each setting by turning button 11. Press button 11 to confirm and return to the previous menu.

The screen displays the type of settings (“Low sounds”, “High sounds”, “Sound distribution”, “Balance”),

The menu is exited automatically after a few seconds of inactivity. You can also exit the menu by pressing button 9.

AUX settings

Enter the “Settings” menu, turn button 11 and select the “AUX IN” section to access the settings in the following order:

• HI (high);
• MID (average);
• LO (low).

The following values ​​are selected for each setting:

• HI (300 mV);
• MID (600 mV);
• LO (1200 mV).

Choose language

Select Language from the Settings menu, then choose your preferred language.

Default settings

Enter the settings menu by pressing button 12. Select "Settings", then press button 11 to display the settings menu, then select "Errors". A message will appear on the screen asking you to confirm your selection. After selecting this section, all system settings will take on their default values.

Telephony settings

Enter the settings menu by pressing button 8.

After a few seconds of inactivity, the system will automatically return to the previous menu.

You can also exit the menu by pressing button 8 or 9.

Lada Largus › Logbook › Installing a 2 Din radio on Android + joystick (setup, programs)

The article will be long, I even wanted to break it into several. Final result:

A long time ago (about 4 years ago) I was impressed by the GU on Android from Romario-163 here, but somehow I couldn’t get around to buying it, but the toad was choking me. And then I saw that Android radios now cost around 3 thousand for 7 inches, so I decided to order one. Moreover, on 4pda there is a topic here about this radio “Head unit ML-CK1018 and similar ones, based on the MT/AC8227L processor” Characteristics:

Radio connection diagram

Largus radio block diagram

Delivery took about a week (I ordered from the Russian Federation), delivered by courier. With delivery in the Russian Federation, it was possible to buy only with a universal connector, but I already had an ISO adapter - FR-12 and ISO-Ant1, the wires on the radio were all labeled, so connecting it was not difficult. By the way, the connector on the Android 2DIN radio is called Alpine, if anyone suddenly needs to buy an adapter at an auto parts store. I ordered a frame on Avito for 2,500 rubles (the Largus shop also has it, but the wait is long). Fits perfectly, I had to cut the panel a little.

I glued the GPS sensor on double-sided tape to the upper right windshield. I ran the wires along the rack. It picks up satellites well.

On the plus side, the screen is 7 inches, the play market works, I installed Yandex navigator, YouTube and other programs, installed a 128 GB flash drive, now I have a multimedia archive with cartoons and music in the car.

But the standard launcher on this radio is something like a cross between a Pavasonic and Abibas radio. Fortunately, there is a free, advertising-free Car Launcher (4pda.ru/forum/index.php?showtopic=672503) and similar ones. Setting up the radio - in the standard launcher you can change the default Navigator and player. In the settings, look for the “Developer Mode” item, password 8888

You can change the default navigator and player. There are still a bunch of settings. You can set the automatic download of some programs when you turn on the radio. I set the Navigator, the store and the DVR to turn on automatically.

from the programs I installed: Car Launcher (the actual shell) Torgue (but could not connect the OBD adapter yet) Yandex Navigator (the radio has Google maps) Total Commander Dimmer (to automatically reduce the screen brightness using a timer) MX player (for video) VLC ( for video) MapcamDroid (radar detector) MultiGO (list of gas stations with prices, I drive on gas is very important for me) Waze (navigator-social network) *Everyone praises it very much, but I haven’t figured out the settings yet, in my opinion, it’s some kind of hat

FakeHeader

Comments 36

Good afternoon. I have the same situation. The official Renault center could not help. Has anyone overcome this problem?

Why the hell are they needed then if there is so much hassle with them? Isn't it easier to buy a regular normal radio?

The dealer couldn't supply me with a new one under warranty because of this CONNECT DIAG TOOL - I need some kind of special cord for it, I ordered it and I'm waiting.

Hello. That's right. My 2 service centers in Volgograd could not start due to lack of cable. But I solved the problem. True, I had to send the radio tape recorder to Lipetsk. There is a specialist there who stitched it for 500 rubles. Fortunately, an acquaintance went to Lipetsk on business and I saved on shipping.

Can I contact this specialist from Lipetsk?

If you ever find the lady, let me know.

What's the issue with connectdiag here? Same problem.

The seller cheated, Bitch. He promised to help but doesn’t answer the phone. I found a person who can flash it, but I need a dump, which I haven’t been able to find yet. It lies like a dead weight, next to the amplifier that I wanted to install on this radio

What's the issue with connectdiag here? Same problem.

Well, in principle, for 3k, of course, it’s normal, but I don’t really understand this “staffing”, anyway, there’s nothing very good there. for 5-6k, it looks like the radio already had bluetooth, but at least the sound quality will be more or less there, but here there’s not even 1 pair of RCA? creepy.

The radio is blocked How to find out and enter the code from the Renault radio Answer Here Code generator

How much does Lada Largus weigh?

Those who know what to do can immediately use the code generator; those who don’t, read the article.

Renault radio unlock code generator online directly on the Dustershop77 website:

Generate unlock code:

The PRE code looks like f330 (letter and 3 digits) . It happens that the generator produces three or even two numbers instead of four. Add 0 to this number at the beginning

(543=0543 or 43=0043)

So, after disconnecting the battery, you have a problem - the radio does not turn on, you need to enter a code.

This code may be written down in your service book that came with the car, but if it is not there, then you can

1. Get it from the Dealer

2. Generate with a special program (link to the program)

We will not consider the option of obtaining a code from the Dealer, but will consider obtaining the code independently through the RENAULT PRE-CODE CALCULATOR program.

In order to receive the code, you need to install the RENAULT PRE-CODE CALCULATOR program and run it, after launching you need to enter PRE-CODE, based on which the program will issue a digital 4-digit unlock code, which is used to revive the radio.

To find out PRE-CODE:

— with the radio turned on, simultaneously press buttons “1” and “6” for 3-5 seconds

— the message “pre code xxxx” appears on the display; it contains one letter and three numbers

- this is the PRE code of your radio

If your buttons do not work, or for some reason the radio does not display the pre code value on the screen, then you need to remove the radio and find the pre-code on its case.

The code is circled in red, contains one letter and three numbers, write it down

— enter the pre-code into the RENAULT PRE-CODE CALCULATOR program window

The program will respond with Code = XXXX, where XXXX is the 4-digit unlock code for your radio.

The Lada Largus model is a joint brainchild of the designers AvtoVAZ and Renault-Nissan. Its design is based on the popular universal public car Dacia Logan MCV. When creating this car, the main focus was on the category of practical and family car enthusiasts, because the set of technical and operational features of the model fully correspond to its image.

The basic version of the equipment of the Lada Largus implies the presence of a standard radio, which the Korean company Daewoo kindly shared with Tolyatti residents. However, sometimes the firmware of the radio is required. In addition to the head unit, the developers addressed 4 loudspeakers located around the perimeter of the interior space, or rather in the door panels. Owners notice that this device fits harmoniously into the interior and has quite simple and convenient functionality. All controls and buttons are intuitive and do not cause “stupor” even for “wild” drivers. The high-quality fit of all components of the audio complex is also noted, since during operation it was not possible to find any backlashes or squeaks in the buttons.

To study in detail the full range of functions of this radio and how to control them, you should watch this informative and useful video:

Note that the consumer radio kit includes convenient instructions, which are designed to provide a quick acquaintance with the device and its functionality. In this article we will tell you how to unlock the Largus head unit.

Enter the code. Step-by-step instruction

How to enter the code step by step. The input process itself involves following this sequence of manipulations.

1. We turn on the Lada Largus radio by pressing the “1” button in the keyboard field. In this case, an inscription appears in the form of “CODE” with the numeric dial “0000”. The first digit character will be in flashing mode.
2. Now, by pressing the “1” button, we achieve the first digit to appear on the display.
3. Entering the next digits in the code line is carried out in a similar way. However, this will require pressing the keyboard buttons corresponding to the serial number of the code digit (“2”, “3” and “4”).
4. Once you have completed entering all four code characters, you will need to press and then hold the “6” button, also located in the keyboard field.
5. Immediate unlocking of the radio will indicate that the code on the radio has been entered correctly.

Important! When the radio code is entered incorrectly, a message in the form of “CODE ERROR... WAIT” is displayed on the screen, after which a 2-minute time delay will be required. Then you can start re-entering.

Each subsequent input attempt, if it turns out to be incorrect, requires a shutter speed twice the previous time interval, etc.

Sound via bluetooth

A standard car radio in combination with dynamic speakers “reads” music programs equally well, “digesting” any genre without much difficulty. The manufacturer has addressed radio lovers with a powerful antenna device that allows them to pick up a signal of even minimal power. The radio allows you to memorize 6 stations in each frequency range.

Renault Sandero DIY repair

Renault Sandero wiper blades

Compare Renault Captur and Hyundai Creta

Listening to music is available via CD drives or flash devices. Also for the same purposes, switching using Bluetooth is possible.

Recognized formats:

• "CD" and "MP3";
• "AAC" and "WMA", as well as "WAV".

With a wireless connection, it is possible to rewind not only between music programs, but also directly within a track.

The display clearly displays the charge level indication (if “Bluetooth”), as well as the “RDS” line. There is a Russified font in “IDTag”.

Other methods of connecting to this device are the “Jack” and “USB” sockets.

Functions of the standard Largus audio radio

The audio device that is present in the Lada Largus allows the owner to acquire such useful options as:

• search and memorize radio stations broadcasting in the traditional FM or AM bands;
• the ability to display the names of tuned stations with a convenient “RDS” function;
• playback of audio programs recorded in the following formats: “MP3” and “WMA”, as well as “AAC” and “WAV”;
• connecting external sources to the head unit for the purpose of subsequent playback of information programs through standard speakers (for this, the radio has “USB” and “Jack” connectors, as well as a “Bluetooth” option;
• switching with the “Hands Free” wireless kit, which allows telephone communication with subscribers while driving.

Also, we should not forget about the presence of a security coding function in the radio, which allows you to increase the degree of protection of the device from theft attempts.

Replacing car radio Lada Largus

We take out the radio. Suddenly you have decided to replace the device.
Or maybe you just want to clean it, change the firmware, install a code, or repair a tired standard device. Another relevant question arises: how to remove the Lada Largus radio without any visible external latches, keys and locks? If you have seen the removal process on Renault cars, then you know that there are four holes along the perimeter of the front panel. This is where the tricky latch and the answer to the question of how to remove it are hidden. You will need 4 short rods at once, something similar to metal knitting needles or wire 2-2.5 mm thick. You need to first insert our two pins into the left side, and then the remaining two into the right. By simultaneously pressing all four, you need to pry the plastic card from below, and the radio will come out of its grooves. Now you can do anything with it: change the firmware, program the code, repair, etc. You will especially need this procedure when you disconnected the battery terminals.

After this procedure, you need to enter the code again, and if you don’t know it or don’t remember where you put the documents, you will need information from the back panel. There we will find a barcode, the last four characters of which we will need in order to generate a new code for the Lada Largus radio. It is advisable not to forget it. Without the correct code, the radio will not even turn on.

Coding of the original car radio

The standard Lada Largus device contains a set of protection functions that allow you to block attempts to turn on in cases where:

• the power supply from the on-board network (battery) is disconnected;
• the fuse-link protecting the device burns out;
• The radio is directly disconnected from the local power supply.

To be able to turn on a locked radio, you will need to enter a special four-digit code key. This code for the radio may be present in the service documentation attached to the device itself or simply be communicated to the owner at the time of purchase in the showroom.

Note that the code for the radio is entered using the keyboard, which is located on the front panel of the device.

How to unlock the radio? Radio code generator

Other unlock options

There is an alternative way to unlock the Lada Largus radio. You will need to contact an authorized dealer. Specialists send the car's VIN number to the manufacturer. The dealership receives a password from the factory for the installed car radio. The method will not work if the device was replaced with a similar one under a warranty card or personally by the driver. Most often, the official representative removes the radio. The dealer reads the information on the label. He determines the code using a calculator.

The first Largus models had a device that broadcast a preliminary password. To see the code, you need to immediately press keys 1 and 6. Hold the buttons for 5 seconds. An explanation will appear on the screen, followed by a four-digit password. It must be entered into the calculator as described above.

Nowadays such equipment is rare. There are no other ways to unlock the radio. Some car owners reflash the software. But this will not help decode the stereo device.

How to decode the head unit

The procedure involves determining the radio code, entering which allows you to activate the head unit in the Lada Largus. Such actions should be resorted to when the word “CODE” appears on the display, and the owner does not know its digital version. Let's consider the option of how to unlock the radio, as well as how to enter the code correctly.

Here you will need access to a special code generator applicable to Renault and LADA Largus radios. You can get this service by registering for free on the corresponding website on the network.

The decoding process involves an algorithm consisting of several stages.

1. We simultaneously press and hold the “1” and “6” buttons present on the keyboard (for 5-6 seconds).
2. After this, the display will display the inscription “pre code xxxx”, where the last four characters indicate that same “pre code”. It is necessary to gain access to the secret code combination, by entering which the radio will be instantly decoded. The radio code itself is formed from one letter and 3 numbers.
3. If this operation fails, you will need to dismantle the radio. For this purpose, you need to acquire two pullers “7711381821” or four pins. These devices are inserted into special holes present on the front panel of the audio device. Simultaneous pressing on the integrated removable components allows you to remove the radio from the landing shaft. Now disconnect the cable connector and antenna wire.
4. There is a sticker on the back wall of the device on which the manufacturer has applied a special barcode and other information related to this product. There you can also find the same “PRE-CODE”.
5. We go to a site with a code generator and enter the “PRE-CODE” read on the sticker into a special window for this service.
6. Now we confidently click on the “Generate” button, after which we get the code we need.
7. Next remains the method indicated by us to enter encoded information into the radio.

Attention! Before dismantling the device, we recommend disconnecting the power supply by removing the terminals from the corresponding terminals of the LADA Largus battery.

Level two. Replacing standard speakers

This is where you need to be very careful. This is a field with a rake; you can’t run with your eyes closed. This upgrade option is not always applicable. If you replace only the speakers and leave everything else, then it is far from a fact that the system will “sing.” Moreover, in some cases the result may be completely negative. Although the standard audio system itself is not of a high class, everything in it is matched to each other and balanced.

It is clear that the audio system is far from a priority element when designing a car, but sometimes the methods for installing standard speakers are simply surprising. The photo shows a standard BMW speaker, which was simply attached to the inside of the upholstery and covered with a light casing

One of the tricks that automakers resort to is reduced acoustic impedance. In general, the most common acoustics in car audio are 4-ohm ones, but in “standard” speakers they often use 2-ohm ones. All in order to boost the dead standard amplifier and slightly increase the volume headroom. Replace these speakers with more conventional 4-ohm ones and you get a quiet system, and any attempts to increase the volume will be accompanied by an increase in distortion.

But that’s okay, there are plenty of aftermarket acoustics with 2-ohm ones. Don't step on another rake - a corrected signal. This, by the way, is one of the “tricks” of many branded standard systems - it’s not the components that are better, but correction that compensates for the features of cheap speakers and the shortcomings of their acoustic design. Replace the dynamics in such a system, and such a correction will no longer be appropriate.

But there is no need to be scared and completely discard this option. Today you can find many acoustic kits that are tailored specifically for certain brands and models of cars. Mainly for European ones, in this part of the world such an upgrade is most in demand.

The video demonstrates the ease of upgrading a standard audio system by simply replacing the OEM speakers with a set specially designed for a specific car brand:

Call/receive a call

Call a contact from the phone book

When you connect to a phone, its phone book is automatically downloaded to the system.

To enter the phone menu, press the 8 button and select “Phone Book” by turning the 11 button. To display the contact list, press the 11 button.

Select the name of the contact you want to call from the list and press the 11 button to call.

Note. To return to the previous menu, press button 9.

It is recommended to stop the vehicle to dial a number or search for a contact.

Call a contact in your recent calls list

To display a list of recent calls, press button 8 and select “Call List”.

Select the Recent Calls, Incoming Calls, or Missed Calls menu. After displaying the list of recent calls, select a contact name or number, press button 11 to confirm the selection and make a call.

Call by dialing a number

Enter the phone menu by pressing button 8 and selecting the “Dialing” section. Dial the desired number using the numeric keypad by pressing and turning the 11 button, then select

To call the last number dialed, press and hold the 8 button.

When you connect your phone to the system, the dual line call feature will be disabled. A call received during a telephone conversation will be automatically rejected.

Take the challenge

When receiving an incoming call, the subscriber's number will be displayed on the screen (this function depends on the service package provided by your mobile operator). If the number of the received call is entered in the phone book, the caller's name will be displayed on the screen instead of the number. When calling from a hidden number, the message “Private number” will appear on the screen.

To accept a call, select A by turning and pressing the 11 button. To reject a call, turn the 11 button and select B.

During a telephone conversation

You can:

• change the volume by pressing buttons 14 and 16;
• pick up the handset by pressing button 8.

By turning button 11 you can:

• hang up (press C);
• transfer the conversation from the audio system to the phone by turning the 7 7 button (press D);
• control the phone keypad using the audio system (press E).

Note. To answer an incoming call, press and release button 17 located under the steering wheel. To reject a call, press and hold button 17. To answer a call, press and release button 17.

Replacing the standard MMC Kalina 2 Lux

First, I ordered an adapter frame for 2DIN from Alamar and, in addition, some small things, like an overlay for the rear bumper:. Then I ordered the radio from DNS: www. Here is a good review of this shaitan machine: club. And in February, all this disgrace was already in hand, but there was no warm garage... I had to contact through friends and the warm box was paid for. By this time, I already suspected that not everything was so simple... The thing is.

Let's figure out how to install navigation in the standard radio of the Lada Granta. I would immediately like to talk about the electronic connection of the radio. Now, when installing a radio, there is no need to run wires to power the radio and for the speakers; all this is included in the standard audio preparation of the car. How to connect a radio in a car, installation instructions.

Car radio for Lada Largus

There are quite a lot of owners who, by the will of fate, are destined to spend a long time at the “wheel” of their car. For example, these are residents of megacities who get stuck in traffic jams every day. The Lada Largus model is equipped with a modern standard car radio, which allows the driver to escape from the hustle and bustle of the world and relax a little while listening to pleasant music.

Next, we will look at the list of audio device capabilities that the manufacturer kindly endowed his brainchild in the form of the universal Lada Largus. I would also like to add that many owners of this model believe that the standard car radio is not very good and requires the installation of a new device. Those who know how to remove a radio can easily cope with the task with their own hands; a connection diagram can also be used for these purposes. In this case, the installation will be more successful and faster.