During operation, the engine produces certain noises, which require the installation of appropriate equipment to suppress them. The muffler for Kalina is represented by a tube, which includes the muffler itself and the resonator.
Its body is solid and sealed, it is made without welding, which indicates good protection against rust. After some period of use, the device wears out and begins to work louder. As a rule, drivers of a Lada sedan, station wagon or hatchback, whose mileage is at least 40 thousand kilometers, encounter this problem. If the part is worn out, it can be “patched”, but its complete replacement is recommended. You can do this yourself using a hammer, wrenches and lubricant.
Differences between spare parts
Today on the market you can find an extremely large number of Kalina mufflers, the prices of which are too low. However, you need to understand how much an original spare part costs (to do this, just go to the official Lada website) in order to be able to distinguish between components made by hand. They will most likely last several times less than the original and, quite possibly, due to non-compliance with the technology, will even pose a danger to the life and health of the driver. Spare parts for model 1118 differ in the following parameters:
- material. The original spare part is made of aluminum or stainless steel. A product made of stainless steel will be quite difficult to find; they are often made to order. If the muffler is made of any other material, it is a fake;
- price. The cost of the original component is estimated at a thousand rubles or more, while fakes can cost less;
- weight. For the original it is higher than for the fake, since the real model is equipped with thicker walls and also contains a soundproofing layer;
The difference between the Kalina sedan, station wagon and hatchback muffler is that in the first and second models the product tube is curved, and the last model is equipped with a muffler with straight inlet and outlet pipes.
What does the muffler consist of?
The main part of the exhaust system serves to absorb noise. On the Lada Kalina car, this function is performed by a pipe, which includes the muffler itself and its resonator.
The thickening is the resonator, the end is the muffler itself
The pipe has a completely sealed body, which is manufactured using the rolling method, that is, without the use of a welding machine. Thanks to this, the muffler is durable and does not corrode. And the resonator, which is also located in the pipe, consists of several closed chambers. These chambers are connected to each other by small tubes with holes in them. Thanks to this structure, the resonator can quickly smooth out all acoustic vibrations. In the latest modifications of the Lada Kalina, the inside of the resonator is lined with sound-absorbing material.
The three-chamber device allows you to reduce the noise level in the car
Unfortunately, the quality of mufflers for Kalina leaves much to be desired. Often their service life does not exceed 40–50 thousand kilometers. Therefore, the car owner has to think about which “gluker” to choose. Today, mechanisms for the Lada Kalina are presented at a variety of prices - from the cheapest to the most expensive. However, it is better to navigate the world of auto parts using the following parameters:
- muffler material: original spare parts are made of stainless steel or aluminum, they will last as long as possible and ensure high-quality exhaust removal;
- cost: you should not purchase a device below the 1 thousand ruble mark;
- weight: an original and high-quality “glushak” will weigh more than a fake, since the chambers are equipped with thicker walls and sound-proofing materials.
Manufacturers
Parts for Lada 1118 can be purchased from the following manufacturers:
- Lada . The AL category factory part has all the necessary characteristics for installation. It is made of aluminized steel, and the addition of silicon to the mixture only better protects the product from rust and improves resistance to temperature changes and aggressive chemical compounds. You can purchase such a part from official representatives of the company or in company stores;
Factory muffler for Lada Kalina
- BalakovoRezinoTechnika. This Russian manufacturer, in addition to spare parts for domestic cars (VAZ, KamAZ, GAZ), is engaged in the production of rubber products as its main activity;
- Auto kit . This company operates in St. Petersburg and produces, in particular, roll-up mufflers for the VAZ 1118;
- Melitopol plant of automobile and tractor mufflers "UTAS". Engaged in the manufacture of exhaust gas systems. The company's assortment includes 150 types of products, including intake and exhaust pipes, mufflers for the VAZ 1118. The products produced are excellent for Moskvich, VAZ, MTZ, GAZ, ZAZ and many other brands of vehicles;
- SKS . The company's products meet the declared characteristics and have the required thickness and standard size. It is made, like the factory components, from aluminized steel, and can be installed along with the factory components of Kalina 1118;
Features of replacing parts
After replacing the muffler on Kalina, in rare cases you may encounter the following problems:
- sagging of the installed exhaust system. The opposite case is possible - the exhaust rests on the bottom of the car. To fix this problem, you just need to turn the Frets 1118 assembly or align poorly compatible parts with a file;
- mismatch of old and new components. Contrary to popular belief, this problem appears before replacing the muffler, but simply does not appear until the purchase of a new component. In this case, you also need to check all fastening points.
The purpose of the muffler is to remove exhaust gases from the engine. From the name of this unit it is clear that it also dampens their sound.
On Kalina, the muffler consists of two parts - the main and additional ones, which are connected to each other by a clamp and an o-ring.
The neutralizer is part of the main muffler. It is attached to the bottom of the car using two pillows.
The Kalina muffler is designed for at least 50 thousand mileage; with proper use of the car and proper care for it, the service life can be even more.
Changing the muffler with your own hands
Work to replace the Kalina-2-Universal muffler will require the preparation of the following tools and consumables:
- key to 13;
- WD-40 lubricant;
- hammer;
- flat screwdriver;
- new part (muffler).
The most difficult and time-consuming stage of this work is considered to be the dismantling of the device. If you can't remove the part with a hammer, use a screwdriver. Find the clamp that connects the resonator to the muffler. It should also be dismantled, but this will be difficult to do: the bolts stick over time and are very difficult to unscrew. They need to be lubricated with WD-40 and wait 10-15 minutes. Only then should you try to unscrew the bolts again. Experts advise using long wrenches, because in some places it will be very difficult to unscrew the nuts.
After you have removed the clamp, remove the muffler from the rubber hangers. There are only two of them: the first is located near the very bottom of the car, and the second is located near the edge of the muffler. After this, the device can be removed.
To install a new muffler, you should do all the steps described above in reverse order. Change pillows if necessary. You need to be sure that the parts that make up the exhaust system do not come into contact with body elements even during minor vibrations. Otherwise, a constant knocking noise will be heard while driving. Before attaching the muffler, it is better to remove all stickers and price tags from it. At the end of the work, you can put a special chrome attachment on the Kalina-Universal muffler as a tuning option.
Malfunctions
The following signs indicate a muffler malfunction:
- the engine makes a growling sound;
- Exhaust gases enter the interior from under the bottom of the car, which is easily determined by the smell.
The main causes of muffler malfunction:
- water, it causes corrosion in the muffler and, over time, holes form in it;
- a sharp change in temperature leads to the formation of condensation;
- mechanical damage (impacts from the muffler due to its low location);
- shaking on the roads leads to disruption of connections;
- muffler burnout.
When malfunctions occur, a problem arises - repair or replacement? In any case, measures must be taken, otherwise the powerful roar of the car will disturb others, get on the owner’s nerves and attract the attention of traffic police officers.
If there is no experience in repair work, or the muffler is seriously damaged, then it is worth replacing it.
Where is the best place to shop?
It is better to buy silencers for Kalina in specialized stores. They sell quality products from well-known brands. You can also buy good spare parts in online stores. But there is a risk of buying a fake or old part.
It is worth going to the car market if there is a shortage of finances. Here, silencing devices for Kalina are sold at a low price. But spare parts often turn out to be counterfeits from Chinese companies under a well-known brand. Such parts wear out quickly. Therefore, the problem of replacing the muffler soon arises again.
Replacement
There are two options here. Give the car with a new muffler to a service center, or replace it yourself. If you have the skills to handle the tool, then replacing it yourself will not be so difficult and much cheaper.
To work independently you will need the following:
- WD-40 lubricant or similar chemicals;
- a set of wrenches (mostly socket, socket 13 with a collar);
- hammer.
- The car is driven into a pit.
- All bolts and nuts of the clamp that connects the muffler to the resonator are lubricated with grease. Most likely, without it, it will be difficult to unscrew due to dirt and rust. When the lubricant penetrates the entire thread, use a 13mm wrench to unscrew the nut on one side of the clamp completely, and on the other half. If required, the bolt head is kept from turning with the same key. The clamp can be easily removed.
- The muffler is disconnected from the resonator, the sealing ring is removed. If you can’t remove it by hand, then you need to knock it off the joint with light blows of a hammer.
- The next step is to release the muffler brackets from the rubber cushion rings. One is located next to the rear beam, the other is located next to the exhaust pipe. If this is difficult to do, you can help with a screwdriver. That's it, the muffler is removed.
Installing a new one is done in reverse order. When replacing, do not forget about installing the O-ring and ensuring that the muffler is in an even position, otherwise you will not be able to avoid damage on uneven roads.
How to install a new muffler on the Lada Kalina
The installation procedure will take no more than five minutes. Since all the elements are new, you won’t have to deal with rust and corrosion. The installation procedure looks like this:
- First, the device itself is installed - two rubber hangers are used for this.
- The resonator is mounted in place of the old device with 13 bolts.
- The connection between the muffler and the resonator is secured with new clamps.
- After which you can remove the car from the jacks and check the functionality of the device.
The result of the work
In order for the muffler to last a couple of thousand km longer, before installation it is necessary to fill it with a special liquid that prevents corrosion from forming. The muffler must be twisted in different directions so that the liquid completely lubricates the internal space.
As a result of replacing the muffler, the sound of a running engine will not frighten passers-by, alarm drivers or infuriate traffic police inspectors. And comfort.
Whose muffler is better to buy for Lada Kalina?
Lada Kalina or VAZ of the 1117-1119 family is not as common in our country as classic models or models of earlier versions, but they are still quite common on our roads. For this model, you can find a fairly wide range of exhaust system spare parts on the Ukrainian market. Today we will focus on the questions: how much does a muffler cost for Kalina, how much does a resonator cost for Kalina, which muffler is better to choose for Kalina?
The most important criteria that we will focus on will be the cost of the spare part, as well as the ratio of quality and price. The cheapness of spare parts is not always the optimal solution, although here it is clear: “the stingy pays twice!”
Which muffler should I buy for Kalina (VAZ 1117 - VAZ 1119)?
Fundamentally, on the Ukrainian market you can buy two types of spare parts for the VAZ 1117-1119 muffler system. These are parts made of ordinary black steel, as well as products with anti-corrosion coating. You should consider which muffler is best installed on Kalina (station wagon, sedan or hatchback).
Muffler selection
The choice of a muffler for Kalina should be treated extremely carefully, since the life of the part will depend on the quality of the material.
It is worth considering this issue in more detail, identifying the articles and manufacturer.
Original
The original catalog number of the Lada Kalina muffler is 1119-1200010 . It fits perfectly into standard seats and does not require modifications or alterations. The average cost is 2500 rubles.
Analogs
There are two analogues of the original Kalina muffler:
- Fobos (42244) – it also fits on standard landing mounts. The average cost is 2000 rubles.
- Izhora muffler (136110) – it requires improvement in terms of fastening. This is due to the fact that the ear of the elastic fastening is located a little further. Therefore, you will have to purchase a non-standard rubber washer, which will secure the muffler to the body. The cost of such a product is about 3,000 rubles.
Refinement and tuning
Standard and tuning muffler Stinger
Some car enthusiasts tune the chassis to improve their Lada Kalina. It requires some modifications, namely rearranging the standard mounting locations on the body.
As practice shows, consumers like exhaust system tuning kits from, DTW, ASF, TRU, RosTorg, ProSport+.
There are also many facts when the owners themselves created entire systems with their own hands.
