Colors of vases 2114 what they are, how to choose a color

The body colors of VAZ cars and color numbers given in the table below will help you find out the color of the car and the paint number of the car. It is applicable to the following models of domestic VAZ cars: 1111 Oka, 2101-2121, 2131 (Niva) 4×4, Chevrolet Niva, LADA Priora (Priora), LADA Kalina (Kalina), LADA Kalina Sport, LADA 110, LADA 112 Coupe, LADA Samara, LADA 2105, LADA 2107, LADA 4×4, LADA Granta, Volga, IZH, GAZ cars

BY COLOR NUMBER

Lada 2114 2011, 90 l. With. — owner review

Owner review

Hi all! I want to present my car! So, let's begin! VAZ 2114 16 V "ZAO Super-auto" was purchased on October 30, 2011. I drove it before, ok, I didn’t like the VAZ 2112 2002, I sold it and bought a new 13, and then something pulled me to buy a foreign car, I bought it I drove a Ford for 8 months and realized that there was practically no difference, I sold it, and for a long time I thought about what to buy, so that it would be cheap, powerful and cheerful, I considered the Priora, but no, the Kalina Sport, extremely expensive, for a Russian car! And then the idea came to me to buy a 14-r with a Priorov engine, I called Alexey at Standard-Auto in Togliatti, he said that there is no one with a Priorov engine, there is one with a 124 engine. from 12th grade! And then I rushed to Togliatti, arrived, Alexey showed me the car, and we began to arrange it! I ended up getting the car: 277,500 RUR The story about the purchase of my VAZ 2114 is over! Now you can go to the config of this car! VAZ 2114 16 V "ZAO Super-auto" was purchased on October 30, 2011

Car: — VAZ 21144 16V-124

Year of manufacture: — 2011

Mileage: - 22000 Engine: - 21124 - Injector - Antifreeze - Gasoline - 92 - Ford 5W-40 oil

Suspension: — Stock spring — rear -2 turns

Transmission: — 5 gearboxes — stock — Short-throw shifter (for-mash)

Interior: — Stock — Electric windows — Shumka — 5 LED lighting lamps

Music: — Head: Pioneer DEH-6310SD — Front speakers DLS 2 stripes + crossover — Amplifier Mystery MR-4.75 — Sub MAC-Audio 750W — Storage

ON YEARS

The colors of VAZ 2114 by year of production are presented in the following table

Varnishing and polishing a car after applying paint

To varnish the coating blue or blue metallic use:

• HS type varnishes are solid, economical (but difficult to polish) compounds applied to the painted surface in 1.5 layers;
• MS type varnishes are soft, short-lived, but easier to polish, which are applied in 3 layers to a pre-painted base.

Each applied coat of varnish must dry naturally, just like the primer. This process is simple, you just need to make sure that drips and a rough surface, called shagreen, do not appear.

You can check the dryness of each layer by touching it with your finger. If the painted part is no longer dirty, but your finger sticks slightly to it, then you can continue the process. The final stage of painting is polishing the surface. There is no need to carry out this stage if the body painting was carried out in a special chamber equipped with a circulating air system with filtration.

Sometimes particles of dust or dirt still get onto a freshly painted and not dried surface. This area will need to be polished.

This procedure allows you to eliminate some of the defects formed during painting (in particular, from dust that has settled on the painted surface or small drips).

Interesting! During the polishing process, a very thin layer of varnish is removed, after which the treated area is polished with a special polishing paste and a machine.

WHAT DOES METALLIC MEAN?

Metallic paint is a type of auto enamel to which aluminum powder pigment has been added. The metal filling makes the composition reflective. The body begins to shine and sparkle in the sun.

The advantages of the technology include the fact that the surface of the body better reflects heat, so the interior heats up in the sun much less.

In addition, metallic has high anti-corrosion properties, so saffron milk caps appear less frequently.

Additional aluminum particles protect the paint from fading. The car looks “new” for much longer.

Features of paints

Restoring paintwork or selecting body parts to match the body color are common types of body repairs for VAZ models. And good quality paint is the primary key to a beautiful and healthy car.

The owner who fully understands what it all means pays careful attention, almost scrupulously, to the condition of the car paint. Here are just a few properties of paintwork, determined by the chemical composition of the paint:

• Curing time, or the amount of time it takes for paint to dry;
• A specific color with an individual, unique shade;
• Gloss: its presence or absence;
• Viscosity;
• Temperature that must be maintained during the drying process;
• Adhesion and much more.

Drying time is the required period of time required for all the solvent to come out of the paint layer and for the surface to acquire at least some hardness. This indicator is also called polymerization time. If the paint takes a long time to dry, then there is nothing wrong with this, only in one case: if the drying is carried out in a well-closed garage, hermetically sealed on all sides (something similar to a drying chamber).

In principle, the conditions described above are required for any paint, but the duration of maintaining the regime may vary. So, if the paint is based on alkyd enamel, its drying time will be much shorter.

Note. However, this has its drawback: rapid drying contributes to the formation of a thin layer of film on the surface, which prevents the composition underneath from completely drying. In other words, such paint is only dry in appearance, but does not have sufficient hardness from the inside.

On the contrary, acrylic enamels (AE) look much better. They dry, however, longer than alkyd ones (AlE), but they provide the required hardness.

There is another concept of paint that is more commonly used in the automotive world. We are talking about the ability of paint to give off gloss. It is clear that matte paint will not look very good on a car, although the color itself can be of great importance here, and matte paints are often coated with varnish on top.

Note. For the most part, alkyd enamels have matte properties. Acrylics, on the contrary, have a shiny appearance.

First of all, the chemical composition of the paint allows you to expand the range of colors as much as possible. And often, designers use melamine alkyd enamels (MAle), which give iridescent colors at different angles and look very beautiful. But applying these paints is a rather complicated process and requires knowledge of the specifics, the ability to apply several layers, etc.

In turn, a lot also depends on the viscosity of the paint. So, if the paint does not meet this indicator, the paint layer on the car will be cast in large drops, which looks extremely unsightly and is a defect. On the contrary, MAle and AlE have low viscosity (liquid) and allow you to obtain the desired appearance.

A property called adhesion allows the atoms of paint and body metal to firmly bond. All automotive enamels, be it alkyd, melamine-alkyd or acrylic, have almost equal adhesion. Only acrylic has this ability a little more.

Drying temperature is no less important. Thus, it is known that MAle has the highest drying temperature. In this case, the mark reaches 150 degrees. This significantly limits its use in garage conditions, where there is nowhere and nothing to provide such a degree.

How to determine the color of a VAZ 2113, 2114, 2115 by year of manufacture

» />

This summer I decided to change the bumpers to new ones. I reached under the spare tire to look at the color number on the plate. The sign was there. There is only one BUT: it was NOT FILLED! The second sign was not in place at all. The documents for the car listed the body color as “graphite metallic”. I started searching on the Internet: how to determine the color? There are several ways (except for the color plate, you can use the VIN) and it seemed to me the simplest - by the year of manufacture of the car. Found here I attach an image (photo of the table):

Currency

A rather rare shade of “Currency” was used in the color of early versions of 2114. “Currency” first began to be used in the production of “nines” and “eights” back in the 90s.

Now this variation is designated by code 310 . This metallic gets its name due to the presence of a faint green tint, like on dollar bills.

In sunny weather, the metallic “Currency” looks rather boring, but when the body is dirty, it is not much different from other gray options on the “four”. In combination with white wheels, “Currency” looks more interesting.

There have been many variations of gray bodywork on VAZ models throughout the history of production. According to car owners, Sochi is considered the most beautiful, which does not lose its richness in any weather. The exact year in which each type of color began to be used is not publicly available. If you have codes, you can purchase paint yourself, but we recommend that you play it safe and take the gas tank door when visiting the store, because... it is easy to remove.

Brief color chart for LADA (VAZ) cars

Vaz color chart to help you!

Sources

• drive2.ru/l/485146037812462355/
• 7vaz.ru/vaz-2114/cveta-vaz-2114.html
• duin.ru/obzori/vse-cveta-vaz-2114-s-foto.html

Preparing the car body before painting it blue

Before starting painting, it is necessary to carry out preparatory work on all body elements. Dismantle (if any) all moldings, locks, seals - they interfere with the painting process. Sometimes these elements are left behind, sealed with tape.

Next, puttying is carried out, leveling out existing unevenness and flaws, and then a primer is applied.

Important! The old paint layer is completely removed, and corrosion areas are especially thoroughly cleaned.

During the preparatory work, straightening or welding of body parts may be necessary. It must be remembered that the color of the putty mixture should be close to the color of the future paintwork.

Expert opinion

Ilya Vyacheslavovich

Consultant for body repair at krasymavto.ru

Ask a Question

It is necessary to use all chemical materials and components from only one manufacturer, since often the colors and compositions of different manufacturers are incompatible.

As a result of application to such an unreliable bottom layer, the paint may peel off and the color may change.

Important stages in preparation for painting are blowing and degreasing the body.

After degreasing comes the stage of blowing the car. It is done using air (ventilation). This is necessary to remove various microscopic debris from the car body that remains after the previous stages, especially after sanding.

Color fan 2022

An online fan of colors, in the form of reference information, will help you choose colors for painting your car, for example, if you decide to paint it a different color. The table shows the car colors, car color name and paint codes from the VIKA color fan.

Please note that the table also shows paint colors for foreign cars that are produced here and in neighboring countries. You can see the original colors of foreign-made cars at the link - colors of automotive paints for foreign cars

The table also shows the release forms, brands and prices for enamels of the colors presented in the fan. Usually you can buy all colors from us, if one is not in stock, then we can bring the paint you need to order as quickly as possible.