Standard alloy wheels for Kalina 2 15. What size wheels are on Lada Kalina: tires, wheels, bolt pattern. Characteristics of standard wheels of different configurations

Reading time: 7 minutes

Lada Kalina is the first car of the Russian concern AvtoVAZ, produced in 2 generations over 14 years, from 2004 to 2022, and had an appearance close to Western competitors in this class of compact cars. In terms of the cost of the basic equipment, Kalina was always ahead of its European competitors. The high reliability of this Lada made it possible to operate it for 8-10 years, which led to the need to replace worn parts, and the main ones were always the wheels.

Wheels for Kalina

The wheelbase, technical characteristics of the engine, as well as the traditional compact size are an invariable feature of absolutely all VAZ cars, with the exception of the iconic Niva. Numerous car owners of domestic cars are largely limited in the choice of wheels, since the dimensions of the car in the basic configuration simply do not allow them to install something exotic. If we talk about the factory version, then the wheels for the Kalina are supplied with the following characteristics:

Lada Kalina

• This is a traditional 58.1 mm drill and 4x98 bolt pattern for the brand, which, in principle, is not bad, as it provides versatility and interchangeability. In addition, the standard European size 4x100 is also suitable for these parameters.
• The simplest configuration of the Lada Kalina is equipped with stamped wheels 5.0J x 13 ET40, which corresponds to 175/70/R13 tires. Such a small size is especially convenient for tire fitting, since you can even “change the shoes” of the car manually, and the car also becomes more passable on snowy roads.
• As standard, the manufacturer equips this car with wheels with the specifications 5.5J x 14 ET37 or 6.0J x 14 ET37, and the ideal tires for this size are 175/65/R14 and 185/60/R14, respectively. As a rule, they also come in the “stamping” version, but are covered with decorative plastic caps in the original version.
• More expensive modifications of the Kalina are equipped with 6.5J x 15 ET35 wheels and 195/50/R15 tires. This is the best option, since with such a size, the car enthusiast does not need to change the shoes of his “iron horse” twice every year, and he can immediately install all-season tires and change them only as they wear out.
• The luxury version of the car is considered the most expensive and comes from the factory with an automatic transmission and alloy wheels, which can compete with the equipment of compact cars from the world's leading automakers. So, the size of this product is 6.5J x 16 ET45, and the tires have dimensions of 195/45/R16.

Factory wheels for Lada Kalina

If we consider a car option like the Kalina Sport, intended for high-speed travel around the city, then it is highly not recommended to install R13 wheels on this modification due to the tire profile being too high. The risk is that on sharp turns the tires may simply fly off the side of the rim, and this will inevitably lead to an accident. Thus, the wheels on the Lada Kalina Sport have a width of at least 6.0J-6.5J and a radius of 15 inches and above.

Steel or light alloy: which is better and why

Based on the manufacturing method, models are divided into two types. Steel ones (also called stampings) are distinguished by the fact that during production all parts are welded. This is a simple technology, so their price is low. The positive aspects of this option: discs are easily restored even with deep deformations, they are highly reliable, durable, and repairs are simple and inexpensive. Negative aspects: difficulties with auto-balancing, increased weight, uniform appearance (it is possible to modify it with caps or paint), low corrosion resistance.

Light alloy products are modern and more popular; they include aluminum and magnesium alloys. According to the production method, they are divided into cast, forged, combined, and titanium.

View	Manufacturing	pros	Minuses
Cast.	The metal is poured into molds, then the frozen surface is processed. This production method makes the metal structure grainy.	Low weight.	During long-term use on broken, bumpy roads, microcracks appear that can split the disc with a powerful impact. Repairs are expensive; products are straightened on a machine. But after such a procedure there is no guarantee of reliability during operation.
Forged.	Manufactured by hot stamping. The texture of the metal becomes fibrous and durable.	Low weight and high strength.	Forged wheels are produced from aluminum or magnesium (luxury quality, stronger than aluminum, the price is much higher, made by pre-order).
Combined.	Cast and forged parts are connected using special bolts.	They are subject to repair, and the rim can be replaced, but the central part can be left.	A considerable price, which provoked mass counterfeits - with decorative bolts.
Titanium.	Due to the large weight of the metal, the thickness of the disks is reduced during manufacturing.	The most durable.	They have a high price. A small number of models are produced.

When choosing cast specimens, you should pay attention to the metal that is part of the alloy: magnesium - lighter in weight, but with reduced strength; aluminum - less susceptible to cracking. So what products are most suitable for Lada Kalina ? Every driver strives for maximum safety on the road. When choosing wheels, you should analyze the condition of the surfaces on which the car will be driven and your driving style.

The advantages of steel wheels are their attractive cost. In addition, there is the possibility of restoration after deformation. When impacted, they do not split, but are crushed; suspension and steering parts are minimally damaged.

Alloy wheels for Kalina have such advantages.

1. Wide range of different models. Additionally, there is the possibility of painting.
2. Low weight increases the dynamic parameters of the suspension, which improves driving safety.
3. Better performance of heat removal from brake units.

In Europe, alloy wheels are more popular. In the Russian market, due to the quality of roads, most drivers choose steel or forged ones.

Car owners know that VAZ recommends only three tire sizes for Kalina-2. Two of them are standard - we are talking about the standard size 185/55 R15 (used with “casting”) and 175/65 R14 (option for “casting” and for). We looked at all this before, and here we are going to talk about what other standard sizes, not included in those recommended by the factory, are suitable and proven options. The review is based on publications by tuning authors.

How to choose wheels with radii R13 and R14 for the Lada Kalina

These wheels have the following distinctive features, knowing which, the owner will quickly decide what kind of wheel he needs:

• R13 wheels on the Lada Kalina should not be considered in the “cast” version, since they will not add beauty to the car due to their small size, and they will not be cheap compared to stamped products (1.2-1.7 thousand rubles .* per wheel).
• Alloy wheels for 14 on the Lada Kalina are presented on the market with many options, from which you can choose the most suitable products both for aesthetic reasons and based on the most reasonable price.
• The width of the wheel rim cannot be less than 5.0J, since otherwise the disks will simply lose stability, but not more than 6.0J, so that the driver does not have to look for a non-standard offset.
• Rubber must be selected only with a high profile, 65-70 mm, which excludes the possibility of comfortable high-speed driving, however, with a smaller cross-sectional size, the car will drop so low above the road that the driver will have to go around every bump to avoid damage to the bottom.
• The most popular brands of these wheels are domestic giants, such as AvtoVAZ itself or franchise concerns - K&K and SKAD.

Car modifications

Lada Kalina was produced for 14 years. The manufacturer offered the consumer two generations of small class cars.

First generation

The debut car of the Kalina family appeared at AvtoVAZ in 2004. It was released as a sedan. The first generation cars were equipped with 1.4 liter (89 hp) and 1.6 liter (81 and 98 hp) petrol engines. In 2006, Kalina hatchbacks appeared, the next year - station wagons, and a year later - a sports modification. Depending on the configuration, the car was equipped with ABS, electronic power steering, airbags, and an air conditioning system. During production, changes were constantly made to the equipment of the vehicle. In 2009 and 2011, Lada Kalina became one of the best-selling brands in the country.

Second generation

In 2013, the plant's conveyor belt was modernized to begin production of the next generation of cars. LADA Kalina 2 was produced in hatchback and station wagon bodies. It is characterized by a more modern appearance, better aerodynamics and increased comfort. Improved powertrain, suspension and gearbox are distinctive features of the vehicle compared to previous generation models. Both hatchbacks and station wagons were equipped with 1.6 liter engines with variable intake, the power of which varied between 87...106 hp. A manual or automatic transmission was installed.

The maximum configuration included the installation of anti-lock systems, stability control, air conditioning and navigation, a traction control module, an after-braking system, a passenger airbag, a touch screen, heated front seats, a rain sensor, etc.

The latest modification of the Kalina family is the Lada Kalina Cross. It is distinguished by increased ground clearance, a modified final drive ratio and a more aesthetic appearance, for example, due to decorative trims on the wheel arches and sills.

In 2022, production of Kalina family cars was discontinued.

How to choose wheels with radii R15 and R16 for the Lada Kalina

Those car enthusiasts who choose 15 and 16 radius wheels for their Lada Kalina save less on their budget and often think about the appearance of their “iron horse”.

With a radius of 16, the “casting” has a relatively large mass, given that the car itself is very compact and light. Therefore, when driving at high speeds, a driver with such discs will definitely feel a decrease in the dynamic characteristics of his car. Thus, R16 should only be purchased in a forged version, since the specific gravity of a lightweight alloy will be lower than on cast wheels.

When adjusting the factory wheel width 6.5J x 15 ET35 or 6.5J x 16 ET40, it should be taken into account that it is necessary to carefully select the ET dimension, since the disk must be under the wheel arch and at the same time not touch the stationary parts of the car. In addition, if the wheel protrudes beyond the dimensions, the driver will need to purchase additional plastic protection against dirt around the perimeter of the wheel arches.

For a spare wheel, it is better to purchase an inexpensive stamped version; it will cost less than “casting” or “forging”, and besides, this wheel is used extremely rarely.

Among the most well-known manufacturers, various companies of both Russian and foreign production predominate, with the exception of those listed above, in particular IFree, YST, Yokatta, VSMPO Aurora, NZ, Alcasta and some others.

Alloy wheels on Lada Kalina Sport

Stamped and cast: which is better?

According to the production method, wheels for LADA Kalina are divided into two global categories: stamped (from steel sheet) and light alloy (forged, cast or combined).

For the first option, manufacturing involves welding individual structural elements of the product. The technology is simple, which has a positive effect on the cost of disks.

Among the advantages of “stampings” we note:

• reliability;
• maintainability (tendency to eliminate bent areas);
• durability.

• it is difficult to perform auto-balancing;
• significant mass of products;
• lack of design possibilities (same type);
• low corrosion resistance.

Now let's touch on light alloy options. Such discs are more progressive products that are made from light metal alloys such as magnesium and aluminum, etc.

When choosing the kit you like, we recommend paying attention to the indication of the primary metal included in the material structure.

If magnesium dominates, then the discs are light in weight, but the strength properties of this option are far from ideal. Aluminum gives the product strength and fluidity. This translates into good resistance to cracking under impact loads. Wheel alignment will also likely be required.

To give preference to any of the above options, we recommend that you undertake an approximate analysis of the condition of the roads on which your LADA Kalina will travel in the future.

• availability of a wide range of models;
• light weight, which has a positive effect on handling and dynamics;
• good dissipation of heat generated by brake units.

Characteristics of wheels on Lada Kalina Cross

Starting in 2014, Russian engineers of the AvtoVAZ concern slightly adjusted the suspension of the Lada Kalina station wagon and they got a crossover, since the car was raised a few more centimeters above the ground. In addition, the necessary attributes for a small SUV were added to this version, and a fundamentally new car rolled off the assembly line - the Lada Kalina Cross. Of course, in order to match the qualities of the SUV, the car is equipped with slightly different rims.

The wheel size for Kalina Cross in the simplest configuration is 5.5J x 14 ET35, and for a slightly more expensive modification - 6.0J x 15 ET33, which corresponds to tires 175-185/55-65/R14-R15, but in this In this case, the car does not look very impressive due to too large gaps between the rubber surface and the wheel arches. Therefore, many car enthusiasts change the tire profile without touching the wheels to 70 and even 75 mm, which creates the effect of a real SUV.

In richer trim levels, the car is equipped with a slightly larger radius of wheels with parameters 6.5J x 15 ET30, and 195/55/R15 tires fit perfectly on them. This size is in high demand among buyers, as it is optimal for both smooth asphalt and off-road trails.

Lada Kalina wheel size: tires, wheels, bolt pattern

Lada Kalina owners often wonder what kind of wheels and tires are suitable for this car? In this case, the manufacturer provided an answer to this question and compiled a list of possible options for installing different wheel and tire options on Kalina. But the bolt pattern also plays a big role.

Tire size on Kalina (factory)

According to the manufacturer's data, three tire sizes can be installed on the Lada Kalina. It depends on the year of manufacture of the car. So, let's look at what options exist for installing tires on the Lada Kalina:

1. The most common size option is 175/70R13. This is the standard size of “Zhiguli” tires, which takes its history back to the “Classics”.
2. The second most popular size on the VAZ, but the most common on the Lada Kalina is 175/65R14.

14th radius on a Lada Kalina with Kama-217 tires (this is a classic!)

The wheel rim with which the Lada Kalina comes off the production line in the most popular “Norma” configuration

From a different angle, the same tires and the same wheels

• The third standard tire size option is 185/65R15.

Standard version of wheels for Lada Kalina in LUX configuration: 6.0×15 4*98 ET 35 dia58.6

All other tire size options are non-standard and are not recommended for installation on the Lada Kalina.

Visual table of tire applicability for Kalina

Visual table for selecting tire sizes for Lada Kalina

Disk size

There are two options for installing disks on the Lada Kalina according to the technical documentation:

5.5x14

Wheel rim 5.5*14*98

6.5x15

Standard rim R15

Appearance on 15th wheels

To install other discs, you will have to replace some suspension and control parts.

Bolt pattern and possible options

Bolt pattern is the fastening of the wheel to the hub using bolts or special studs. Simply put, this is the size of a car's "shoe."

Wheel rim for Kalina with bolt pattern 4*98

For all generations of Lada Kalina, the bolt pattern is standard 4x98, although there were experiments when some cars came off the assembly line with a non-standard parameter - 4x100.

17" casting machine

See what the Kalina-2 hatchback might look like on 17-inch wheels:

Kalina-2 on 17-inch casting, with and without lowering

There are two tuning options presented here, with and without lowering, and in both cases the wheels used are: 7Jx17 ET-38. Tires – 205/40 R17. According to the author of the first method, there are no problems as a result. That is, the wheels do not cling to the body anywhere even when the car is loaded. The only thing is that when you turn the steering wheel all the way, one of the wheels still slightly touches the metal, but this can be neglected.

You need to take into account the following: if you simply take and install wheels with 205/40 R17 tires, the seating position of the Kalina-2 hatchback or station wagon will increase to 175 mm (the standard value is 160 mm). In general, the next step should be to do it correctly. Author's version: the front suspension uses struts and springs shortened by 90 mm, the rear suspension is also equipped with shortened shock absorbers and springs (-90 mm). You don’t have to lower anything, but simply install new wheels, and this tuning method has been tested by owners in reality. But it is unlikely that a car with a seat height increased to 175 mm has better handling than the factory version. We will leave the choice to the owner.

Tires and wheels for Kalina (compatibility and photos)

External tuning of a car begins with replacing standard stamped wheels with cast ones. And here the first question arises: what wheels to put on Kalina? In this article we will look at the size, parameters of Lada Kalina wheels and their compatibility.

Standard tire and wheel sizes for Lada Kalina

From the technical characteristics of the car it turned out that, depending on the configuration, the standard size of Lada Kalina wheels can be as follows:

• 175/70R13
• 175/65R14
• 185/60R14

Lada Kalina tires and wheels have the following parameters:

Tire size, load capacity index	175/70R13 82T, N	175/65R14 82T, N	185/60R14 82T, N
Wheel rim (disk) width, inches*	5J	5J, 5'/2	5J, 5'/2J
5J, 5'/2J, 6J	5J, 5'/2J, 6J	5J, 5'/2J, 6J
Wheel rim offset (ET), mm*	35	35	35
35-40	35-40	35-40
Air pressure in tires front/rear when loaded with more than 3 people without luggage, MPa (bar)	0,19/0,19 (1,9/1,9)	0,20/0,20 (2,0/2,0)
Air pressure in tires front/rear at maximum permitted load, MPa (bar)	0,19/0,21 (1,9/2,1)	0,20/0,22 (2,0/2,2)
Diameter of mounting holes, mm	98
Diameter of the central hole of the wheel (disk), mm	56
Minimum tire tread height, mm	1,6

Marking of wheels and tires

What tires and wheels are suitable for Kalina

Alloy wheels for Kalina

Now, in order, for comparison: R14 wheels on Kalina (Photo author):

R15 wheels for Kalina (Photo by):

R16 wheels for Kalina (Photo author): R17 wheels for Kalina (Photo author):

R18 wheels for Kalina (Photo by):

By the way, do you know how to lower Kalina?

conclusions

When selecting tires and wheels for Lada Kalina, all parameters should be taken into account. For proper installation, wheels with the appropriate size and bolt pattern are first selected, and only tires for them are selected. On the contrary, it will be much more difficult to search. Replacing wheels and tires is easy in a garage or tire shop. After installing new parts, an alignment should be done to prevent increased wear.

Car owners know that VAZ recommends only three tire sizes for Kalina-2. Two of them are standard - we are talking about the standard size 185/55 R15 (used with “casting”) and 175/65 R14 (option for “casting” and for). All this is us, and here we are going to talk about what other standard sizes, not included in those recommended by the factory, are suitable and proven options. The review is based on publications by tuning authors.

• 175/65 R14
• 185/60 R14
• 185/55 R15

In the first and third cases we will get the same outer diameter, equal to 584 mm. It should be noted that the remaining option (185/60 R14) is not used regularly, although it is recommended. If we talk about choosing disks, their parameters should be as follows:

• PCD 4×98 (4 holes for fastenings with centers on a circle d=98 mm);
• Reach ET-35 for any standard size from the recommended ones;
• Rim width – 5, 5.5 or 6 inches (disc diameter can be 14 or 15 inches);
• DIA – 58.5 (bore diameter).

It is not forbidden to use even this combination: tires with a width of 175 mm and wheels with a rim width of 6 inches. Although, this option is not the most acceptable. It is clear that only 185/55 R15 tires can be installed on 15-inch wheels. It must be remembered that the use of tires and wheels whose size is not included in the list of recommendations may lead to the loss of the vehicle warranty. However, here we will list exactly those options that are suitable, but not recommended for use by AvtoVAZ. Let's start with the boldest.