What size wheels are on the Lada Kalina: tires, wheels, bolt pattern

Reading time: 7 minutes

Lada Kalina is the first car of the Russian concern AvtoVAZ, produced in 2 generations over 14 years, from 2004 to 2022, and had an appearance close to Western competitors in this class of compact cars. In terms of the cost of the basic equipment, Kalina was always ahead of its European competitors. The high reliability of this Lada made it possible to operate it for 8-10 years, which led to the need to replace worn parts, and the main ones were always the wheels.

Wheels for Kalina

The wheelbase, technical characteristics of the engine, as well as the traditional compact size are an invariable feature of absolutely all VAZ cars, with the exception of the iconic Niva. Numerous car owners of domestic cars are largely limited in the choice of wheels, since the dimensions of the car in the basic configuration simply do not allow them to install something exotic. If we talk about the factory version, then the wheels for the Kalina are supplied with the following characteristics:

Lada Kalina

• This is a traditional 58.1 mm drill and 4x98 bolt pattern for the brand, which, in principle, is not bad, as it provides versatility and interchangeability. In addition, the standard European size 4x100 is also suitable for these parameters.
• The simplest configuration of the Lada Kalina is equipped with stamped wheels 5.0J x 13 ET40, which corresponds to 175/70/R13 tires. Such a small size is especially convenient for tire fitting, since you can even “change the shoes” of the car manually, and the car also becomes more passable on snowy roads.
• As standard, the manufacturer equips this car with wheels with the specifications 5.5J x 14 ET37 or 6.0J x 14 ET37, and the ideal tires for this size are 175/65/R14 and 185/60/R14, respectively. As a rule, they also come in the “stamping” version, but are covered with decorative plastic caps in the original version.
• More expensive modifications of the Kalina are equipped with 6.5J x 15 ET35 wheels and 195/50/R15 tires. This is the best option, since with such a size, the car enthusiast does not need to change the shoes of his “iron horse” twice every year, and he can immediately install all-season tires and change them only as they wear out.
• The luxury version of the car is considered the most expensive and comes from the factory with an automatic transmission and alloy wheels, which can compete with the equipment of compact cars from the world's leading automakers. So, the size of this product is 6.5J x 16 ET45, and the tires have dimensions of 195/45/R16.

Factory wheels for Lada Kalina

If we consider a car option like the Kalina Sport, intended for high-speed travel around the city, then it is highly not recommended to install R13 wheels on this modification due to the tire profile being too high. The risk is that on sharp turns the tires may simply fly off the side of the rim, and this will inevitably lead to an accident. Thus, the wheels on the Lada Kalina Sport have a width of at least 6.0J-6.5J and a radius of 15 inches and above.

Answers (2)

Follow the answers to this question

• bolt pattern 4x98 - for the first and second generations. Depending on the modification, steel wheels or alloy wheels with a diameter of R14 with parameters - 14x5.5 ET 37 TsO 58.5 are installed on the viburnum. The casting has a width of 6.0. ET - offset, CO - centering hole.

  Egor Chernovoy Expert Cars as a passion.

  27.11.2013 at 19:53

• R13 – 13 / 5.0J PCD 4×98 ET 40 CO 58.5 R14 – 14 / 5.5J PCD 4×98 ET 37 CO 58.5 R15 – 15 / 6.0J PCD 4×98 ET 35 R16 – 16 / 7.0J PCD 4×98 ET 35 CO 58.6

  Ivan Expert I love automotive technology and everything connected with it...

  27.11.2013 at 19:57

  All VAZ cars have the same bolt pattern - 4×98

  Ivan Expert I love automotive technology and everything connected with it...

  27.11.2013 at 19:57

Similar questions

9254

Lada Kalina 2 (2013–present)

This is interesting: What kind of bolt pattern on Ford

How to choose wheels with radii R13 and R14 for the Lada Kalina

These wheels have the following distinctive features, knowing which, the owner will quickly decide what kind of wheel he needs:

• R13 wheels on the Lada Kalina should not be considered in the “cast” version, since they will not add beauty to the car due to their small size, and they will not be cheap compared to stamped products (1.2-1.7 thousand rubles .* per wheel).
• Alloy wheels for 14 on the Lada Kalina are presented on the market with many options, from which you can choose the most suitable products both for aesthetic reasons and based on the most reasonable price.
• The width of the wheel rim cannot be less than 5.0J, since otherwise the disks will simply lose stability, but not more than 6.0J, so that the driver does not have to look for a non-standard offset.
• Rubber must be selected only with a high profile, 65-70 mm, which excludes the possibility of comfortable high-speed driving, however, with a smaller cross-sectional size, the car will drop so low above the road that the driver will have to go around every bump to avoid damage to the bottom.
• The most popular brands of these wheels are domestic giants, such as AvtoVAZ itself or franchise concerns - K&K and SKAD.

Choosing the type of winter tires

For winter operation of the Lada Kalina Cross in urban environments, where transport routes are regularly cleaned by public utilities, a suitable option would be to use friction winter tires (“Velcro”). Such wheels provide reliable grip on the road surface due to the presence of thin cross-sections - lamellas.

Friction winter tires are lighter and more durable than studded tires, have lower rolling resistance and uniform grip characteristics on all types of road surfaces.

However, Kalina Cross is positioned by the manufacturer as an all-terrain station wagon with increased ground clearance. This model is in demand among residents of rural areas and suburbs, therefore, in winter the machine is actively used in conditions of loose snow cover. Frequent trips on icy roads or roads covered with a layer of densely packed snow are also likely. In this case, installing studded tires would be the right choice.

Studded tires provide a shorter braking distance on snow and ice, but on clean asphalt they are inferior to Velcro tires in this indicator. Also, studded tires are characterized by a high level of noise when driving.

Additional information about the selection and rules for using various types of winter tires can be found in the following video:

How to choose wheels with radii R15 and R16 for the Lada Kalina

Those car enthusiasts who choose 15 and 16 radius wheels for their Lada Kalina save less on their budget and often think about the appearance of their “iron horse”.

With a radius of 16, the “casting” has a relatively large mass, given that the car itself is very compact and light. Therefore, when driving at high speeds, a driver with such discs will definitely feel a decrease in the dynamic characteristics of his car. Thus, R16 should only be purchased in a forged version, since the specific gravity of a lightweight alloy will be lower than on cast wheels.

When adjusting the factory wheel width 6.5J x 15 ET35 or 6.5J x 16 ET40, it should be taken into account that it is necessary to carefully select the ET dimension, since the disk must be under the wheel arch and at the same time not touch the stationary parts of the car. In addition, if the wheel protrudes beyond the dimensions, the driver will need to purchase additional plastic protection against dirt around the perimeter of the wheel arches.

For a spare wheel, it is better to purchase an inexpensive stamped version; it will cost less than “casting” or “forging”, and besides, this wheel is used extremely rarely.

Among the most well-known manufacturers, various companies of both Russian and foreign production predominate, with the exception of those listed above, in particular IFree, YST, Yokatta, VSMPO Aurora, NZ, Alcasta and some others.

Alloy wheels on Lada Kalina Sport

Stamped and cast: which is better?

According to the production method, wheels for LADA Kalina are divided into two global categories: stamped (from steel sheet) and light alloy (forged, cast or combined).

For the first option, manufacturing involves welding individual structural elements of the product. The technology is simple, which has a positive effect on the cost of disks.

Among the advantages of “stampings” we note:

• reliability;
• maintainability (tendency to eliminate bent areas);
• durability.

Negative aspects:

• it is difficult to perform auto-balancing;
• significant mass of products;
• lack of design possibilities (same type);
• low corrosion resistance.

Now let's touch on light alloy options. Such discs are more progressive products that are made from light metal alloys such as magnesium and aluminum, etc.

When choosing the kit you like, we recommend paying attention to the indication of the primary metal included in the material structure.

If magnesium dominates, then the discs are light in weight, but the strength properties of this option are far from ideal. Aluminum gives the product strength and fluidity. This translates into good resistance to cracking under impact loads. Wheel alignment will also likely be required.

Lada Granta overall dimensions

Lada Granta station wagon

Covers Lada Granta

To give preference to any of the above options, we recommend that you undertake an approximate analysis of the condition of the roads on which your LADA Kalina will travel in the future.

Advantages of "casting":

• availability of a wide range of models;
• light weight, which has a positive effect on handling and dynamics;
• good dissipation of heat generated by brake units.

Characteristics of wheels on Lada Kalina Cross

Starting in 2014, Russian engineers of the AvtoVAZ concern slightly adjusted the suspension of the Lada Kalina station wagon and they got a crossover, since the car was raised a few more centimeters above the ground. In addition, the necessary attributes for a small SUV were added to this version, and a fundamentally new car rolled off the assembly line - the Lada Kalina Cross. Of course, in order to match the qualities of the SUV, the car is equipped with slightly different rims.

The wheel size for Kalina Cross in the simplest configuration is 5.5J x 14 ET35, and for a slightly more expensive modification - 6.0J x 15 ET33, which corresponds to tires 175-185/55-65/R14-R15, but in this In this case, the car does not look very impressive due to too large gaps between the rubber surface and the wheel arches. Therefore, many car enthusiasts change the tire profile without touching the wheels to 70 and even 75 mm, which creates the effect of a real SUV.

In richer trim levels, the car is equipped with a slightly larger radius of wheels with parameters 6.5J x 15 ET30, and 195/55/R15 tires fit perfectly on them. This size is in high demand among buyers, as it is optimal for both smooth asphalt and off-road trails.

Reference data

VAZ Kalina 2022 EL

Wheels and tires

VAZ Kalina 2022 1.6 16V

Wheels and tires

VAZ Kalina 2022 1.6

Wheels and tires

VAZ Kalina 2022 1.4 16V LPG

Wheels and tires

Lada Kalina wheel size: tires, wheels, bolt pattern

Lada Kalina owners often wonder what kind of wheels and tires are suitable for this car? In this case, the manufacturer provided an answer to this question and compiled a list of possible options for installing different wheel and tire options on Kalina. But the bolt pattern also plays a big role.

Tire size on Kalina (factory)

According to the manufacturer's data, three tire sizes can be installed on the Lada Kalina. It depends on the year of manufacture of the car. So, let's look at what options exist for installing tires on the Lada Kalina:

1. The most common size option is 175/70R13. This is the standard size of “Zhiguli” tires, which takes its history back to the “Classics”.
2. The second most popular size on the VAZ, but the most common on the Lada Kalina is 175/65R14.

14th radius on a Lada Kalina with Kama-217 tires (this is a classic!)

The wheel rim with which the Lada Kalina comes off the production line in the most popular “Norma” configuration

From a different angle, the same tires and the same wheels

• The third standard tire size option is 185/65R15.

Standard version of wheels for Lada Kalina in LUX configuration: 6.0×15 4*98 ET 35 dia58.6

All other tire size options are non-standard and are not recommended for installation on the Lada Kalina.

Visual table of tire applicability for Kalina

Visual table for selecting tire sizes for Lada Kalina

Disk size

There are two options for installing disks on the Lada Kalina according to the technical documentation:

5.5x14

Wheel rim 5.5*14*98

6.5x15

Standard rim R15

Appearance on 15th wheels

To install other discs, you will have to replace some suspension and control parts.

Bolt pattern and possible options

Bolt pattern is the fastening of the wheel to the hub using bolts or special studs. Simply put, this is the size of a car's "shoe."

Wheel rim for Kalina with bolt pattern 4*98

For all generations of Lada Kalina, the bolt pattern is standard 4x98, although there were experiments when some cars came off the assembly line with a non-standard parameter - 4x100.

17" casting machine

See what the Kalina-2 hatchback might look like on 17-inch wheels:

Kalina-2 on 17-inch casting, with and without lowering

There are two tuning options presented here, with and without lowering, and in both cases the wheels used are: 7Jx17 ET-38. Tires – 205/40 R17. According to the author of the first method, there are no problems as a result. That is, the wheels do not cling to the body anywhere even when the car is loaded. The only thing is that when you turn the steering wheel all the way, one of the wheels still slightly touches the metal, but this can be neglected.

You need to take into account the following: if you simply take and install wheels with 205/40 R17 tires, the seating position of the Kalina-2 hatchback or station wagon will increase to 175 mm (the standard value is 160 mm). In general, the next step should be a competently executed understatement. Author's version: the front suspension uses struts and springs shortened by 90 mm, the rear suspension is also equipped with shortened shock absorbers and springs (–90 mm). You don’t have to lower anything, but simply install new wheels, and this tuning method has been tested by owners in reality. But it is unlikely that a car with a seat height increased to 175 mm has better handling than the factory version. We will leave the choice to the owner.

Tires and wheels for Kalina (compatibility and photos)

Standard tire and wheel sizes for Lada Kalina

From the technical characteristics of the car it turned out that, depending on the configuration, the standard size of Lada Kalina wheels can be as follows:

• 175/70R13
• 175/65R14
• 185/60R14

Lada Kalina tires and wheels have the following parameters:

Marking of wheels and tires

What tires and wheels are suitable for Kalina

Alloy wheels for Kalina

Now, in order, for comparison: R14 wheels on Kalina (Photo author):

R15 wheels for Kalina (Photo by):

R17 wheels for Kalina (Photo by):

R18 wheels for Kalina (Photo by):

By the way, do you know how to lower Kalina?

What disks are suitable as an alternative to the standard versions?

It's time to change the “original” wheels. The main thing here is not to overdo it, but to choose products that are as similar in design and geometric aspects as possible to the standard options. Note that the wheel parameters “don’t care” what body is in front of them (sedan or etc.).

To make the right selection, you will need to gain valuable knowledge such as:

• the quantitative composition of the holes for the mounting bolts and the diameter of the circle, the conditional line of which passes through the centers of the indicated holes (“LZ*PCD”, for Kalina - “4*98”);
• diameter of the central hole of the disk (“DIA”); for disks of this model it is equal to 58.6 mm (coincident with the hub diameter with tolerance);
• the offset value (or “ET”), which varies in values ​​(to be specified later).

Let's summarize here.

1. The first generation of LADA Kalina in versions “1117”, “1118” and “1119” can be equipped with wheel versions from 13 to 16 inches with the following parameters:

• bolt pattern - 4*98;
• width – from 5 to 6.5 (inches);
• departure – from 25 to 35.

2. The second generation “2192” and “2194” will be content with wheels from 14 to 16 inches with the following characteristics:

• “LZ*PCD” similar parameter (4*98);
• width – from 5.5 to 6.5;
• offset: 25 – 35;
• the hole diameter is identical at 58.6 mm.

It should be remembered that correctly selected wheels will allow you to achieve traffic safety, moderate fuel consumption, and also increase the service life of the suspension.