Wheels for VAZ 2106: choice, size, bolt pattern

Using a car requires the owner to be careful not only in driving, but also in maintaining it in order to extend the shelf life and maintain all technical parameters. The VAZ 2106 is a domestic classic, combining power and driving comfort.

In addition, connoisseurs of classic appearance will be able to please motorists who do not have special requirements for the decorative qualities of the car.

A car consists of different components and systems, but in a special way it is worth highlighting the wheels, which simultaneously serve as a decorative addition and a technical device. The normal functioning of the wheels depends on the quality of the assembly, so each detail requires appropriate attention.

Parameters of standard nuts

In the factory assembly, M12x1.25 bolts were used to fasten the disks. Standard bolts from VAZ-2106 wheels can only be used to fasten stamped steel wheels. When replacing with alloy wheels, the bolts must also be replaced. The diameter and thread pitch will remain the same. The overall length and shape of the cone under the head will change

The thickness of cast discs is greater than that of stamped ones. Therefore, the fasteners must be longer. The conical thickening under the head is the clamping surface of the bolt. If the bolts are replaced with studs, the standard nuts should have a similar surface.

The pressing surface can be not only conical, but also flat or spherical in configuration. The choice of bolts or nuts according to the profile of the clamping surface depends on the shape of the recesses in the holes of the disks, since their contours must completely coincide. This will ensure reliable clamping density. The most common conical version of the clamping circuit. For cast wheels, the cone is more pronounced than for stamps, and its angle is 60°.

Important! After installing new alloy wheels, the first time you need to regularly check the tightness of the bolts or nuts until the soft metal is finally compacted under the influence of loads. If this is not done, spontaneous loosening of the bolt may occur.

This is interesting: Stabilizer struts for Mazda 3: selection and replacement

Features of winter tires for cars

Many people believe that the difference between tires designed for different seasons comes down to the tread, namely its design. This is partly true; the tread pattern of winter tires is different from that of summer tires. However, the main difference lies not in the tread, but in the rubber composition itself.

The fact is that at negative temperatures, rubber changes its properties - it becomes hard, while the quality of the grip of the “hardened” rubber decreases. In winter tires, the composition has been changed so that it remains soft even at low temperatures.

But this condition also has a negative role - such rubber becomes even softer at positive temperatures, which leads to the fact that driving the car becomes more difficult, it begins to float a little on the road. Additionally, winter tires are often equipped with metal studs to improve wheel traction on snow and ice.

However, not all winter tires...

equipped with spikes - another type of stingray is produced, without spikes. Popularly, such tires are called “Velcro” or “cobwebs”. The fine, specially applied tread of these tires provides reliable grip on winter roads even without the use of studs.

All-season tires, which are supposedly designed for both summer and winter cold, are also popular among people. This is not an entirely correct judgment; rather, these are tires for the autumn-spring period, since in summer they are not hard enough, and in winter they do not have the required softness.

So you shouldn’t take any chances, and in winter use only tires designed for this period.

So, now the market offers a large number of winter tires for cars, including for our automobile industry; winter tires are sold for VAZ classics, as well as the new generation - 21099, 2110-2114.

One of the significant conditions...

When choosing winter tires for a VAZ, the “wallet size” factor is considered. After all, a lot of companies, both domestic and foreign, are engaged in the production of tires.

But this criterion also has one underlying reason - often tires from European manufacturers are designed for their winters, where the temperature is higher than ours. As a result, expensive tires can perform much worse on the highway than inexpensive domestic ones.

To say unequivocally which winter tires are better for classics and which for other models -

impossible, since each driver has his own opinion. Some people like Nokan Hakkapeliitta, which are considered one of the best, while others are content with the domestic Rosava, and consider the tires of this manufacturer to be quite good.

You can also note such companies as Hankook and Bridgestone, they also have tires that can be installed on VAZ. But in general, it all depends on the money available, as well as on certain preferences - “studded” or “Velcro”, with a symmetrical or directional pattern.

Basic drive functions

Wheel rims on a passenger car perform a number of important tasks:

• rubber seal around the perimeter;
• ensuring a rigid structure under the total weight of the vehicle;
• transmission of torque to the wheel.

Based on these functions, the car enthusiast can formulate requirements for the disks, as well as their technical characteristics. Any wheeled product must be balanced in size, durable and safe. Only after this can you proceed to drilling wheels on VAZ cars.

Disc radius options

The cars were equipped by the manufacturer with R13 wheels, which combine technical and operational convenience. They were appreciated by owners who value the attractiveness and practicality of driving.

But if you want to update the appearance of the car and make it as solid as possible, it is recommended to pay attention to R14-15 and even R16 wheels, while providing the corresponding technical advantages.

Due to the fact that manufacturers have tried to carefully study the design features, car enthusiasts can count on ease of use in accordance with the established rules. Even a large radius will look perfect and will not cause a violation of the technological features of the vehicle.

But, as practice shows, it will be difficult for an inexperienced driver to drive a car on large rims, so it is recommended to gradually switch to them so as not to encounter operational inconveniences.

If this is your first time on our Forum:

1. Please note the list of useful topics in the first message.
2. Terms and the most popular models in messages are highlighted with quick tips and links to relevant articles in MagWikipedia and the Catalog.
3. There is no need to register to explore the Forum - almost all relevant content, including files, pictures and videos, is open to guests.

Best wishes, Administration of the Car Audio Forum Radio

• 02.04.2007 20:28 #2

Technical specifications

The choice of disks is based on technical parameters that are important to consider for safe use in subsequent operation. Experts have formed basic technical standards that are important to adhere to when choosing disks in order to avoid operational inconveniences:

• The number of mounting holes and their circumference diameter is 4*98.
• Hub diameter is 58 mm.
• The most suitable disk size is 13-15, but the 16 radius refers to non-standard variants of a special design.
• Reach – 15-30 mm.
• The most suitable disc width is 5-6 mm.
• M12*1.25 bolts are suitable for fastening the wheels.

These are technical recommendations, but depending on the specifics of the tires and the individual needs of the buyer, wheels are also selected.

R13 or R14

Another important issue is the possibility of switching from standard R13 tires to R14. This issue is controversial; it comes down to tires rather than wheels. Since the disc size is larger, this affects the profile height. The lower the profile, the more the rubber will transmit road unevenness to the suspension, which will ultimately result in an increase in driving rigidity, but the car's handling will improve.

But if you take into account that the handling will improve slightly, but the possibility of damaging the disk itself or the slope on potholes will increase, then it is still better to use disks on the car assigned by the manufacturer.

Many car enthusiasts in VAZs use R14 wheels in the summer, and in the winter they switch to R13, and stamped wheels.

General background information

Ranges of possible values ​​for tires and wheels of VAZ 2106 Zhiguli 2006.
Tires

Wheel disks

Photo

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for VAZ 2106 Zhiguli 2006?

3 types of rims:

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

• deterioration of management;
• uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

• increased fuel consumption;
• rapid wear of the outer tread segments;
• the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

This is interesting: Knock sensor signs of malfunction: error, low level

Select modification VAZ 2106

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source razboltovka.ru

The operation of any car always raises many questions among owners. After all, the driver wants not only to fix all problems in a timely manner, but also to predict them. Especially many questions arise about the correct selection of tires and wheels for your car. Today, a huge number of different products are sold, and few people know how to choose the kit that is ideal for a car.

VAZ 2115

The factory is equipped with two standard sizes: R13, R14. Dealership centers that sell tires for imported cars offer tires that fit the VAZ 2115:

• 175/70 R13 82T.H,
• 175/65 R14 82T.H,
• 185/60 R14 82T.H.

Accordingly, it requires installation of disks:

• 0JR13 H2, PCD: 498, ET35,
• 5JR13 H2, PCD:498, ET35-40,
• 0-5.5-6.0JR14 H2, PCD:498, ET35-40.

The diameter of the mounting hole must be at least 58.6 mm.