Technical characteristics of Lada Largus van FL 2022 - photos, videos, load capacity

Mounting points for suspensions on the body

1 – front subframe mounting points; 2 – shock absorber strut attachment points; 3 – rear subframe mounting points; 4 – guide holes of the front spar; 5 – front guides of the rear spar; 6 – guide holes for mounting the rear suspension; 7 – rear suspension mounting holes; 8 - holes for mounting the rear shock absorber; 9 – rear guide holes of the rear spar.

Scheme for measuring interaxial dimensions

Front: -1: (B1) – (G2) = (B2) – (G1) -2: (G1) – (C2) = (G2) – (C1)

Rear: -1: (G2) – (B1) = (G1) – (B2) -2: (B1) – (J2) = (B2) – (J1)

On a regular Lada Largus van, the body dimensions are selected so that Euro pallets can be transported. We are talking not only about the space between the pillars, which are spaced 108 cm apart, but also about the distance between the wheel arches. It is 96 cm, and one pallet takes 80. The distance from the rear doors to the partition generally approaches two meters! A little more and it would have been possible to fit a couple of Euro pallets. Here we will look at how to remove the partition between the body and the cabin, and at the same time remove the inner bottom of the body. The first is needed for transporting long cargo, the second is also used for some reason.

We study the fastening of partitions and floors. Everything is shown in one video.

Unfasten the partition or part of it

The partition separating the body and the cabin consists of two halves. They can be removed separately. Both parts are screwed to the body with screws designed for a 13mm key size. Of course, you need a socket wrench.

Screws 1 were hidden under the casing

The four screws on the left and right are located on the cab side. And to unscrew them, remove the casing.

All actions with cladding

The left part of the septum is removed after the right. To remove only the left half, first remove both, and then mount the right sash back. Based on this, immediately decide where you will remove the trim - only on the right or on both sides.

The volume of the body on the Lada Largus van cannot be greatly increased, even if the partition is completely removed. But without the partition, by removing the seat, it will be possible to transport loads 3 meters long.

So, let's start dismantling the trim: you need to remove the seat belt (key “17”), and then unscrew one self-tapping screw. A Torx T20 wrench is suitable for the self-tapping screw.

Two parts “1” prevent the removal of casing “2”

It is necessary to unscrew all the parts numbered 1. And the casing will have to be removed, overcoming the resistance of the clamps.

Removing the partition

First, unscrew the four screws shown at the beginning of the chapter (key “13”). Then with the same key they go into the body.

All fasteners are the same

As you can see, both halves are held on three sides: top, bottom, middle. The number of screws will be as follows: four at the top and bottom, five at the seam between the sashes. Work order:

1. Completely unscrew the four screws on top;
2. While holding the nuts on the seam, unscrew the screws from the cabin side;
3. The lower screws are unscrewed 2-3 turns. Then all parts are disengaged.

Body repair of Lada Largus at a specialized service.

Our technical center carries out all body repair work on Lada Largus. The Largus body is a typical passenger car body made of sheet steel, which is treated with anti-corrosion compounds, primer and paint.

Lada Largus has only been in production for a few years and our technicians have not yet received any cars with complaints of body corrosion. Usually the Largus body is damaged due to an accident or traffic accident. Our body shop repairs everything related to tin and body painting work:

• Mechanical and welding work on the dismantling and installation of individual elements and parts of the body - bumpers, fenders, hood, trunk lid, sills, pillars, side members and subframes
• Tin work to restore the correct geometry of individual parts. In case of complex damage, the technicians will offer to completely replace the damaged part of the body
• Restoring the correct geometric dimensions of the load-bearing elements of the body on the slipway. Typically used after complex accidents with severe damage to the car body
• Painting area. Professional putters and painters strictly adhere to the technology of repair and application of new coatings. After all the work has been completed, even a professional will not be able to say with certainty whether this car has been repainted.
• Protective and restorative polishing of paintwork

You can contact us with any damage to the Largus body. These could be scratches, abrasions, paint chips, dents, cracks. The masters of our technical center will perform body repairs on Largus at the highest level. In some cases, it may be advantageous to replace complete body parts. For example, the entire front part of the body up to the glasses. Our technicians will offer you the most optimal replacement option depending on the complexity of the body damage.

Increasing the volume of the cargo compartment (removing the excess part on the floor)

The cargo compartment volume of the Lada Largus van can be increased. To do this, remove the floor covering.

There are two types of fasteners here

We will need special Torx keys, without which the screws cannot be unscrewed: Torx T30 and T40.

Study the picture carefully:

• T40 caps (2) are located at the corners, as well as on the line between the arches;
• The remaining screws (1) are designed for Torx T30 keys.

Removing the trim will be easy. And when you install it, make rubber gaskets. They are fixed to the ends of the frame so that the casing does not rust.

The removable floor (cladding) consists of two halves - left and right. First, according to tradition, the right one is removed.

Cheap to operate

The affordability of maintaining a car consists of two main factors: the car should not require large financial investments, and the price of spare parts and consumables should be moderate. With both factors, the Lada-Largus van with a larger-than-average cargo compartment is in perfect order. Engines from , even if an unscheduled breakdown occurs, can be brought back to life quite realistically at low cost. The same applies to other components and systems of the car.

Body: dimensions, features

This is a standard passenger station wagon, available in 2 versions: 5- and 7-seater. The body dimensions of the Lada Largus station wagon are as follows (in mm):

1. Body length Lada Largus 4470.
2. The width of the car is 1750 (Largus dimensions including rear view mirrors – 2003).
3. Height – 1636 (height including roof rails 1670).
4. The luggage compartment volume is 135 liters (it can be significantly increased by folding the rear seats).
5. The ground clearance of this AvtoVAZ model is 18 cm (at full load - 15 cm).

With such dimensions, Largus has a simple exterior, essentially repeating the features of the 7-seater Dacia Logan MCV station wagon. It meets the basic ideas of a comfortable, budget car for the whole family - its design is simple, laconic, and devoid of pretentiousness. The control dimensions of the car basically repeat the dimensions of the first generation Renault Logan.

How to transport a motocross bike - video example

The body dimensions of the Lada Largus are impressive; they can be called the largest among the B-class representatives. Currently, this car is available in three versions: a passenger station wagon (5 seats), a high-capacity station wagon (7 seats) and a cargo van. In this review we will talk about the dimensions of the Lada Largus.

The dimensions of the Lada Largus station wagon and van are the same, except for the height.
Station wagon (R90) [td] Van (F90)

We have already said more than once that the Lada Largus is a 2006 Dacia Logan MCV adapted for the Russian market, so the remaining dimensions can be borrowed from its progenitor:

Source

• ← size of the rear window of the door VAZ 2106
• Largus rear door size →

Where is the Largus body number located?

An important question that usually arises when registering a car is where the VIN numbers are located. First of all, you need to pay attention to the right central pillar of the car. At the bottom of it there is a plate with data, among which the third item is the required number.

In addition, the number is indicated on the body cross member, under the front passenger seat. Often these numbers are erased - under the seat due to the accumulation of condensation from the air conditioner, and at the door - due to careless use and erosion. This can lead to registration difficulties, so it is important to keep your numbers safe.

Ease of use

The practicality of the car is perfectly combined with a high level of comfort. The Lada-Largus van has a modern air conditioner and audio system, heated front seats, central locking, electric windows and other useful options that are a significant contribution to the profitability of the business. This is explained by the fact that driver comfort affects the success of transportation.

In addition to the above advantages, Lada-Largus has the following options:

• Power steering.
• The glove box is large.
• Pockets in the front doors for storing small items.
• The center console is ergonomic.
• A lighting point is integrated into the luggage compartment.

Interior dimensions of Lada Largus

The general dimensions of the car were discussed above; the equipment also has features in the arrangement of interior elements. The interior design and arrangement of multimedia and security systems have several options - for 5 and 7 seats. Internal dimensions of the Lada Largus assembled at AvtoVAZ:

1. The distance from the trunk to the windshield is 3140 mm.
2. The length from the front panel to the tailgate is 2700 mm.
3. Diagonal (from corner to corner) – 3240 mm.
4. The width in front of the rear seats is 1430 mm.
5. The width in the third row of seats is 1290 mm.

The Largus interior has optimal dimensions for cars of this class, which ensures a comfortable ride for 5 adult passengers. The overall dimensions of the Lada Largus allow you to take a load of 550 kg.

Car interior: there is always space

The design choice of the design of the interior space of the car is considered quite successful for the following reasons:

• The driver's seat is separated from the cargo compartment, which allows you to transport various types of cargo, such as household cosmetics, food, building materials, fabrics, etc.;
• cargo compartment volume - more than 2.5 cubic meters. m.; actual dimensions of the trunk of the Lada-Largus van: length - 187 cm; opening width - 108 cm; in the area of ​​the wheel arches - 98 cm; the width behind the wheel arches is 134 cm; height - 92 cm.

The driver is equipped with the most comfortable cabin for driving in literally any conditions, however, the interior can only be called sophisticated with a big stretch. Ergonomic and slightly strict interior design, the use of high-quality durable plastic make the car interior not only attractive, but also practical.

Van F90

In addition to the standard station wagon, the model has a van body designed for cargo and passenger transportation. A van marked F90 differs from a station wagon in that it has a greater load capacity and has solid rear and side panels. The dimensions of the F90 are similar to the station wagon, with the exception of some points:

1. The height of the van is 1650 mm (with roof rails – 1686).
2. The trunk is significantly expanded, its volume is 2540 liters.

Today, the line of cars continues to develop - there is already a Cross (SUV) option and a CNS (gas) option. In any configuration, the Largus family offers budget-class vehicles that are convenient for transporting cargo and daily use.

Let's sum it up

We made sure that the practical station wagon LADA Largus has an undeniable leadership in the domestic market in terms of capacity and carrying capacity. In addition, this car has an enviable advantage over its competitors - its price, which in most cases can tip the scales in favor of the “hero” of our article.

Empty weight: 5 seats 1260-1345 kg 7 seats 1330-1370 kg Van 1260-1300 kg

Gross weight: 5 seats 1705-1790 kg 7 seats 1810-1850 kg Box 2010-2025 kg

Payload 5 places 445 kg 7 places 480 kg Box 750 kg

They all seem to have the same part, even the stock box, even the body, so perhaps the total weight for ALL cars is 2025 kg and therefore payload: 5 seats 680 kg 7 seats 655 kg Box 750 kg

Who cares about that kind of math? The question was asked not in order to understand that there is an error in the PTS, but in order to understand how realistically it can be loaded into the car without exceeding the calculated design load.