7 Best timing roller manufacturers - ranking 2022

Published: 01/28/2021

• Main manufacturers
• How winter diesel is made
• Which timing belt is better according to driver reviews?
• Features of submitting documentation to court
• Useful tips
• 3 SKF
• How to avoid buying a fake timing belt: recommendations
• What information is indicated in a personal bankruptcy application?
• How do timing belts differ from different manufacturers?
• The best timing belt manufacturers
• Don't forget to leave your review
• Best Timing Belt Roller Manufacturers
• conclusions

Main manufacturers

Despite all the diversity of automakers, there are 3 most common brands of timing belts that supply their spare parts to the assembly line - Gates, ContiTech and Dayco. Therefore, when selecting a strap for the operation of the gas distribution mechanism, they most often buy products from these 3 top companies. Especially if the car is Russian or European.

Belts from the UNITTA and SUN brands can be found on sale for Japanese cars. However, these companies are actually divisions of the larger Gates company. Accordingly, for the “Japanese” it is quite possible to buy a Gates timing belt. MITSUBOSHI belts are produced for Japanese MITSUBISHI cars as originals. Therefore, for cars of this manufacturer, ideally you need to install timing belts of the mentioned brand.

For Korean cars, timing belts of the Dongil and Gates brands are most often installed in the original. Their quality is approximately the same. Although most often Gates belts are supplied to the domestic car market. Nowadays, even though the belts were produced by a third-party manufacturer, the name of the machine itself is also applied to their surface. For example, among other information on the belt you can see an inscription like Renault Gates or similar.

Often, to replace it, you buy not just one belt, but a repair kit, which also includes rollers. Often in such kits you can find individual parts from different manufacturers. For example, Gates belt, Ina rollers and so on. This applies to such reputable manufacturers as the mentioned company Ina, as well as NTN, ContiTech, SKF and others. In such cases, kit manufacturers always pack those belts (according to characteristics and brand) that are recommended by the vehicle (engine) manufacturer.

How to determine the need for replacement?

14 Best Spark Plug Manufacturers

As a rule, most car owners learn about the need to replace rollers during scheduled maintenance.

In order to timely update these consumables, the motorist needs to pay attention to a number of specific signs:

• The car engine takes a long time to start, sometimes not the first time;
• There are malfunctions in the operation of the vehicle’s electrical network: sensors show incorrect readings;
• poor battery charge;

Car manufacturers recommend visual inspection of the timing system at intervals of 15,000 - 20,000 kilometers. During a visual inspection, the car owner will be able to observe the operation of the entire timing system.

As a rule, during such an inspection, the car owner will immediately notice operational problems, which manifest themselves as follows:

• the timing belt has poor tension;
• the rollers have play;
• the tension level of the rollers is not adjustable;
• the surface of the tensioners is damaged;
• when the rollers move, a grinding noise is heard;
• tight movement of the tensioners while turning them (to check, you need to manually turn the roller).

All of the signs described above indicate the need to replace the rollers in the timing system. By following these recommendations, the car owner will be able to replace consumables in a timely manner.

Which timing belt is better according to driver reviews?

1. I installed Gates twice.
   “I installed Gates twice. Of course, I changed it after 90 thousand km. Even after working under such a load, the old belt was still normal!”
2. Gates from China and from Europe are two different things.
   Secondly, the choice of market also matters. Here, too, we need the right move. For example, recently there was a collapse of the ruble. Thus, Nissan and Renault began sending consumables from a cheap line to Russia, albeit original ones.

   Which one is better? Timing belts from Hutchinson or GoodYear are of excellent quality, but they are not so widespread in Russia.”

3. Conti is not cool.
   “Gates is possible. Although, if you come across a Dayco belt, then only them. The timing belt from Conti is not very good, tested by experience.”
4. My diesel is Dayco
   “If you want an original belt, then choose Conti or BOSCH. The main thing is to install everything correctly and not damage anything, then you can easily drive 60 thousand km without problems. Now I have a Dayco belt on my diesel.”

Adjustment

The roller that provides tension to the timing belt is located at the end of the engine. It is equipped with a spring-plunger mechanism, which makes the adjustment procedure much easier, as well as making it faster and easier even for a person who does not have special knowledge and skills.

In the meantime, the adjustment procedure must be carried out regularly. This ensures that the unpleasant effect that was described in the previous section of the article will not occur, and you will not have to spend money on expensive and time-consuming engine repairs.

What do I need to do? In order for the adjustment to take place properly, it is highly advisable to arm yourself with a dynamometer. It will allow you to understand exactly how much adjustment to make in one direction or another, in order to avoid chafing of the thin rubber layer when operating the car.

Of course, you can do without a special tool. However, it is worth remembering that this is just a temporary measure. What can this be useful for? For example, the motor may fail along the way. Or the engine can be repaired independently, in a garage, and after that you need to drive to the service center on your own, so that the tuning can be done there with the help of special equipment more efficiently and accurately.

Features of submitting documentation to court

The application is submitted to the arbitration court at the place of residence of the potential bankrupt, along with all documents and information about income. And you will also need in advance:

• summarize your obligations (in other words: calculate the amount of debts);
• draw up a register of creditors indicating to whom and how much the applicant owes;
• calculate the total amount of liabilities (if it is more than 500 thousand rubles, the likelihood of bankruptcy will be higher);
• provide a list of property with a preliminary estimate of value;
• choose an arbitration manager (or at least a self-governing organization that will send a specialist).

Documents can be submitted in three ways:

• the applicant needs to go to the court office and hand over the documents to the secretary;
• by mail - you must first have copies of documents certified by a notary, make an inventory of the attachments at the post office and send a registered letter with notification;
• via the Internet, using the State Services website - you will need to first verify your identity and issue an electronic stamp.

The method of personally transmitting documents to the court where bankruptcy will be considered is the most reliable and fastest. The secretary can look through the documentation package and immediately tell you what is missing.

Useful tips

Before buying a new timing belt for your car, we recommend that you pay attention to several important aspects

1. Price. One of the key indicators for identifying a fake. Just compare the cost of belts in several stores and outlets. If you see a significant difference in the direction of decreasing price, then you are probably looking at a fake. You can’t buy it, despite the temptation to save money.
2. Brand. Stay loyal to leading manufacturers who can guarantee quality. Nobody disputes that they are also counterfeited. But the best companies use multi-level protection; they are able to guarantee the quality and originality of their belts.
3. Digital symbols. Products from leading brands are made by cutting belts from large blanks. As a result, the labeling of such products contains differentiated symbols consisting of numbers. If all the numbers on a part are repeated, then it is almost certainly a fake.
4. Mechanical damage. When you have decided on the manufacturer and a specific spare part, before purchasing, be sure to check the product for mechanical damage. Any defect potentially reduces the service life of the part, and therefore after a short time the belt may break.
5. Holograms and certificates. Yes, sometimes you can find holograms similar to the original ones and corresponding quality certificates, with the help of which they try to sell a fake to the buyer. But this rarely works with leading brands. They make high-tech holograms and their certifications are difficult to duplicate. They may be similar to fakes, but not identical. Check for security elements. If they are not available, purchasing such parts is strictly not recommended.

Deciding on the choice of timing belt is not so difficult. It is better to buy from the assortment of leading manufacturers with whom you have already become acquainted.

But it is impossible to say unequivocally which of them is superior to all the others. If we start purely from the number of sales, then the leaders of the Russian market will be belts from Contitech and Gates. Products from Balakovo and Bosch are somewhat inferior to them.

Focus on choosing original spare parts or the highest quality analogues. If you buy an analogue, you will have to take additional care to ensure that you do not get a fake. In this component, purchasing original belts through official dealers or service centers looks much more reliable and safer.

Why did it happen so?

Perhaps the automatic requests do not belong to you, but to another user accessing the network from the same IP address as you. You need to enter the characters into the form once, after which we will remember you and be able to distinguish you from other users exiting from this IP. In this case, the page with the captcha will not bother you for quite a long time.

You may have add-ons installed in your browser that can make automatic search requests. In this case, we recommend that you disable them.

It is also possible that your computer is infected with a virus program that is using it to collect information. Maybe you should check your system for viruses.

If you have any problems or would like our support team, please use the feedback form.

The timing belt (Timing Belt) is a closed rubber belt with notches on the inside. It is designed to synchronize the engine crankshaft and camshaft.

What timing belt is installed on Priora and Kalina from the factory ? Standard timing belts for Niva Chevrolet and Lada Priora, Kalina from GATES (Gates). Belt part number: 21126-1006040 (5631XS).

The price of a timing belt starts from 1200 rubles. and depends greatly on regions.

How to avoid buying a fake timing belt: recommendations

Today there are a large number of fakes on the auto parts market. Naturally, the timing drive did not stand aside. Products from not only brands of expensive manufacturers are counterfeited, but also brands that are in the middle price category. To reduce the likelihood of purchasing a fake to zero, we advise you to follow simple rules when choosing the right product:

Visit stores you trust

It doesn't matter which timing belt you choose. It is better to take from official representatives of companies producing specific products.

Carefully inspect the packaging box

Companies that value their reputation invest heavily in printing. If you have the original box in front of you, the images on it will be clear and not blurry. You will not find any grammatical errors in the text part. Perhaps there will be a hologram, although not all companies use it.

Carefully inspect the drive and all the parts included in the repair kit. The outer side of the belt necessarily contains data that will tell about the characteristics and purpose of the product. For example, brand, size, etc. In addition, the rubber must be free of cracks, damage, various inclusions and other inconsistencies.

Some companies allow you to check their products using online verification. QR codes, drawings and other information are applied to the surface of the box, which helps to identify counterfeit products. Using a smartphone and the Internet, product data can be easily checked. You can also send an SMS indicating the code written on the box.

It is important to remember that the counterfeit will work for a very short period of time, while the operation of the gas distribution mechanism and other devices of the power unit will not be performed well enough. Therefore, if you want your drive and the mechanisms that depend on it to work for a long time, then purchase only original products.

Some information about the tension roller

The tension roller is an important mechanism in the timing belt, which affects the quality of tension of the belt drive and connects the crankshaft to the generator. Therefore, not only the operation of the timing belt, but also the voltage of the on-board network and the battery charge depend on its serviceability.

If the engine is turned off, the generator is immobilized, so the main load is transferred to the battery. When the driver turns the ignition key, the crankshaft transmits rotational potential to the generator rotor via the timing belt.

The purpose of the roller is to maintain tension at a normal level. When the mechanism is overtightened or loosened, there is a risk of the following problems:

• excessive noise when starting the power plant (for example, whistling or squeaking of a belt);
• a decrease in voltage level, which causes a number of malfunctions in the operation of on-board equipment and disrupts the battery charging cycle;
• roller jamming. In this case, it will be impossible to continue driving.

What information is indicated in a personal bankruptcy application?

We will discuss how to fill it out correctly below.

1. At the very top of the application we indicate the address of the Arbitration Court in which the process will be carried out (you must select the court at the debtor’s place of residence).
2. Below we provide information about ourselves:
   Date of Birth;
3. passport ID;
4. FULL NAME;
5. place of residence and registration;
6. Contact details.
7. In the application itself we indicate the total amount of accumulated debt. Must be specified separately:
   debt to creditors (with all penalties, interest and other charges);
8. debts for alimony payments;
9. debts related to damage to health of third parties;
10. debts associated with the commission of crimes (compensation for harm).
11. We describe the reasons that led you to bankruptcy. This could be the loss of a breadwinner, loss of a job, deterioration in health, natural disasters resulting in the loss of a home or material property, and more.
12. If banks have made claims against you or filed lawsuits to recover property, this will also need to be mentioned in the application (and the documents themselves or copies thereof must be attached to the application).
13. Next, you will need to provide information about the property owned by the debtor - real estate, bank accounts, deposits and other valuables.
14. Additionally, you must select and indicate in the document the SRO from whose members the court will select a financial manager for your case.

File an application for bankruptcy. faces

How do timing belts differ from different manufacturers?

1. Bosch - acceptable quality at an affordable price.

This manufacturer offers not only household appliances, but also auto parts. The Bosch rubber timing element has a long service life and an affordable price.

With careful use of the car, without unnecessary engine load, this spare part can last up to 60,000 km.

Advantages:

• average price up to 800 rubles;
• country of origin – Germany;
• There are belts for a wide range of models, for VAZ and BMW cars;
• It is rare to find a fake;
• availability of auto parts in most retail outlets;
• long service life;
• integrity is maintained until replacement; it can be done at a service station, and not unexpectedly on the street.

Flaws:

• can only be replaced together with the rollers;
• If you store a new belt drive in the garage, it will dry out and become rough.

2. Lemforder – range for all cars

If the rubber ring of the gas distribution mechanism ruptures, you can use a Lemforder timing belt for replacement, since the brand has represented the richest assortment for all makes and models of cars since 1997.

This is a joint project between a German company and Korean manufacturers, which has increased the capabilities for servicing various modifications. You can use the VIN code to select the appropriate spare part.

Advantages:

• price from 900 rub.;
• warranty for mileage up to 60 thousand km;
• the teeth of the part have clear boundaries, which will allow it to be firmly secured to the pulleys;
• has high stability when used at high speeds with long time intervals.

Flaws:

• you can often come across a fake;
• other manufacturers offer their products in German packaging;
• When purchasing auto parts for future use, you will need to comply with storage conditions.

3. Gates is a leader in its field

This timing belt drive is the best in its industry among similar products, because they are produced in France, Germany, Belgium, and Great Britain.

The parts are of such high quality that they are ordered directly from the automotive industry to factories for the production of new cars. But spare parts can also be found on the market. The rubber timing element is highly reliable and has a long service life.

Advantages:

• compatible with many car models;
• Suitable for high speed use and compatible with sports car models;
• the manufacturer provides a guarantee for operation up to 50 thousand km or up to 2 years;
• reduced risk of tearing due to the 34mm width;
• having 211 teeth, it is securely attached to the pulleys;
• directly supplied to car production.

Flaws:

• price from 2000 rub.;
• It is advisable to replace them together with the rollers, which further increases the cost of repairs.

4. Contitech – from a well-known tire manufacturer

Excellent timing belts are offered by the well-known tire manufacturer Contitech, which is a subsidiary of the Continental brand.

Spare parts are widely known and, like Gates, are directly delivered to the factories that produce cars. But the market offers a fairly wide selection of timing belt drives that are suitable for most models and brands.

Advantages:

• long service life, which exceeds that declared by the manufacturer by about a third;
• has high wear resistance due to additional components in the rubber composition;
• on the outside, the rubber element has a rubberized fabric that protects the internal structure from fuels and lubricants;
• able to withstand loads 15% more than similar belts;
• Compatible with most cars manufactured in Europe, USA, Japan.

Flaws:

• average price up to 1500 rubles;
• You can find fakes.

The best timing belt manufacturers

PartReview has collected enough reviews of various brands for this spare part so that a rating can be formed. TOP timing belt manufacturers:

1. DAYCO - 79% positive votes. Ratio: +123 votes
2. Gates - 74% positive votes. Ratio: +223 votes
3. Contitech - 74% positive votes. Ratio: +177 votes
4. BRT - 72% positive votes. Ratio: +38 votes
5. Bosch - 70% positive votes. Ratio: +38 votes

Best Timing Belt Roller Manufacturers

Failure of these parts can cause a broken belt drive and subsequent costly repairs.

Therefore, when choosing this product, you need to pay special attention to its quality.

Lemforder

Products from this company can be found primarily on cars from manufacturers from Germany, as well as on cars from the Asian continent. Lemforder sells most of its parts on secondary markets.

Equipment. The company's rollers are usually included in the timing belt repair kit. It also includes a belt and mounting hardware. The type and number of rollers depends on the modification of the kit. The products are of high quality, which is confirmed by relevant international certificates.

Life time. The service life of these parts is more than 100 thousand km. mileage When a belt is scheduled to be replaced or breaks, the rollers should also be replaced.

Pros of Lemforder

1. Long service life.
2. Increased wear resistance of parts.
3. High level of protection against counterfeit products on the market.

Cons of Lemforder

1. Careless processing of products: parts with burrs come across.

Koyo

Koyo parts are used on the assembly lines of car manufacturers from the Land of the Rising Sun: Toyota, Honda. They are also in demand in retail.

Equipment. The box has branded stickers with the product article, information about the manufacturer, as well as a barcode. The video itself is in a plastic bag with the brand name. The parts are marked with the brand name and number. Koyo rollers can be sold separately or included in a repair kit.

Life time. Car enthusiasts note the long service life of such products. The belt is more likely to fail than the roller.

Pros of Koyo

1. Excellent presentation.
2. Long service life.
3. High quality materials.
4. Reliability in operation.

Cons

1. Noise or whistling may occur during operation with low mileage of the vehicle.
2. Backlash is formed when half of the service life has passed.

SKF

The company from Sweden is a leader in the production of bearings and rollers of various types. The company began its work in 1907. Now its products are used by car manufacturers in different countries. Its enterprises are located in 32 countries.

Equipment. The company produces both tension and idler rollers for the gas distribution mechanism of cars. Typically, for aftermarket consumers, they are sold in repair kits along with timing belts and fasteners.

Life time. The service life of such parts has a long resource, but they have to be replaced earlier, after the service life of the belts has expired.

SKF benefits

1. Branded packaging that is not easy to counterfeit.
2. Withstands intensive work for a long time.
3. High quality processing of parts.

Cons of SKF

1. After a short period of operation, a whistle appears during engine operation.

INA

The company produces its products at enterprises located in different countries. Its authority is evidenced by the fact that this manufacturer from Germany is an official supplier to Toyota conveyors, which is not available to everyone. INA products have stood the test of time. Car enthusiasts buy them with pleasure for their cars, knowing that they will not let you down.

Equipment. The company produces tension and idler rollers for the gas distribution mechanism of cars. These parts can often be seen with various timing belt kits.

Life time. There is no exact information about the service life of these products. They have to be changed together with the belt. Based on reviews from car enthusiasts, it becomes clear that the rollers could stand for a long time. However, the time has come to replace the belt drive.

Pros of INA

1. High product reliability.
2. Excellent quality material.
3. High quality build.

Cons of INA

1. A hum or crackling sound appears when the engine rotates.
2. Backlash forms after 50 thousand kilometers.

Gates

The company has representative offices on all continents. The head office of the European division is located in Belgium.

Gates products are used by automakers of such well-known companies as Ford, Chrysler, Mercedes-Benz, etc. Parts are also supplied for retail sales.

Equipment. The company produces all types of timing rollers, fasteners, and belts.

Life time. The company claims that the service life of this product is 90 thousand km. mileage

Gates Pros

1. Only high quality materials are used in production.
2. Long service life of parts.
3. Adaptation to harsh climatic conditions.
4. Excellent presentation.

Cons of Gates

1. There are rollers with non-standard widths.
2. Lots of fakes.

Step-by-step instructions for replacing the roller

The work of replacing the timing roller on a VAZ begins with dismantling the old mechanism. To simplify the task, you can use schematic images that indicate the location of the main components.

After reading the diagrams, you need to slightly unscrew the nut holding the roller (it is indicated by the blue arrow in the previous image)

Behind it is a washer, which is important not to lose when turning it out. It is enough to slightly turn the roller by hand and loosen the belt. The mechanism itself is presented in the form of an oval structure, responsible for adjusting the tension of the belt drive

After completing these steps, you must remove the belt from the camshaft, taking special care. You also need to release him from the video itself

To completely remove the belt, you will need to unscrew the bolt holding the generator pulley.

At the next stage, after successfully dismantling the belt, you need to completely unscrew the nut holding the tension roller and the washer that is located behind it. Further along the shaft, remove the roller itself and check its bearing. This is done by rotating the outer part of the roller (it should not jam, play, make squeaks or other extraneous sounds). Make sure that there are no defects and that no grease is leaking from the bearing. Otherwise, the substance will contaminate the roller.

Note!

After removing the old roller, look at the spacer ring installed behind it and check it for defects. If the part is in good condition, not crimped or deformed, there is no point in buying a new ring, because you can put the previous product in place.