Stinger is known among VAZ car owners as a manufacturer of exhaust system tuning parts. Having started 12 years ago with the production of direct flow for classics, today the company produces exhaust manifolds, mufflers, resonators and related parts for VAZ and foreign cars under its own brand, including:
- Hyundai-TagAZ
- Chevrolet
- Daewoo
- KIA
- Geely and others.
The main advantage of the Stinger is durability. It's no secret that standard exhaust system parts for VAZ are made of not the highest quality metal. Their service life usually does not exceed 3-4 years.
The stinger is made of high-quality stainless metal and powder-coated. With proper preparation and care, it will last 2-3 times longer than usual.
The manufacturer is rightfully proud of the sporting qualities of its product. A complete replacement of the VAZ 2114 exhaust system will give the car an increase in several horsepower and a significant improvement in dynamics, which will leave many foreign cars behind.
Original muffler stinger VAZ 2114
Spider 8v
The exhaust manifolds of this section were developed by Stinger SPORT LLC for VAZ cars with eight-valve internal combustion engines.
Spiders (exhaust manifolds) from an eight-valve car are not suitable for sixteen-valve cars, the difference is in the exhaust flange attached to the cylinder head. ÂÂ Eight-valve engines are still very popular in our country, which is why the products in this section of our online store are in demand in all regions of Russia.
spiders 8 V.
Eight-valve exhaust manifolds (spiders) produced by STINGERSPORT LLC from this section are installed instead of the standard exhaust manifold of a VAZ car, and perform the following functions:
- improve the purging of working cylinders due to the design features, which in turn increases the filling of the combustion chamber of the cylinder with the fuel-air mixture, and as a result, increases engine power. The effect increases when an eight-valve exhaust manifold (spider) is installed in conjunction with tuning camshafts and a tuning receiver.
- If a standard catalytic manifold fails, using an eight-valve spider produced by Stinger Sport can simultaneously increase engine power and not spend money on purchasing an expensive catalytic converter.
Installation: Stinger Sport 8-valve spiders are installed in place of the stock exhaust manifold. When connecting the spider to a standard resonator, you will need to shorten the standard resonator and use a welding machine to move the flange connecting the resonator to the spider. But if you install an eight-valve exhaust manifold with a Stingersport resonator, then no welding is required.
Material: The material used for the production of exhaust manifolds is time-tested steel 08 PS, which is used for the production of high-quality exhaust systems, as well as technical grade 419 stainless steel, which differs from food-grade stainless steel in that it does not have a glossy sheen and slightly magnetic due to impurities.
Execution options:
As in the version with sixteen-valve spiders, Stinger sport eight-valve exhaust manifolds are manufactured according to two schemes: 4-2-1 and 4-1; the differences in the use of these configurations are described in the video from our channel
The price for Stinger sport eight-valve exhaust manifolds, as well as the price for other products of our production, is very affordable, which is due to the absence of a chain of intermediaries between the manufacturer and the seller.
Source
Some features
There are several nuances that should be taken into account when modifying the exhaust system of a VAZ-2114.
The installed tuning manifold is wider in size, so it will touch the rubber pipe leading to the stove. To prevent this from leading to coolant leakage in the future, this pipe should be replaced with a new, longer one, and taken away from the manifold. The lambda probe will also have to be replaced, since the hole for its mounting in the tuning manifold is lower than in the standard one, which is why this sensor with extended wiring is needed.
Also, the “Spider” is more voluminous at the bottom, so installing underbody protection is no longer possible.
The final stage of all this work is reflashing the electronic control unit, which will allow the new exhaust system to be “perceived” as standard. Also, flashing will allow you to “unleash” the full potential of the power plant after processing. It is better to perform flashing from knowledgeable specialists at a service station.
This is all the work related to the processing of the exhaust system of the VAZ-2114 car.
Source
Exhaust system Stinger
The Stinger exhaust system for tuning the VAZ 2114 car is becoming more and more popular in Russia. The result of interest in Stinger products, whose exhaust systems have been known since 2004, is direct-flow exhaust gases. The company produces high-quality products for motor sports based on individual projects, as well as for tuning foreign cars and VAZ cars. Therefore, stinger exhaust systems have proven themselves to be excellent in both sports and city driving.
Stinger exhaust on Priora
Car tuning is gaining more and more popularity every year and is becoming much more sophisticated and diverse. All components of the car, from the engine to the body, are subject to modifications and improvements. With help, the exhaust system can also be subject to tuning. The reason is clear and simple - obtaining a significant effect at low costs for spare parts and labor. This operation will not be superfluous for the VAZ 2114 if the standard exhaust gas system is replaced with a stinger exhaust.
Additional details
There are mufflers on sale with or without pre-installed decorative nozzles at the end of the pipe. Nozzles differ in shape and installation specifics. Some will require boring out some space on the bumper. Check with the manufacturer for information about the selected model.
Straight-through muffler Stinger
Nozzles
The attachments add aesthetics to the appearance of the VAZ 2114. There are 3 options for attachments on sale:
- oval
- circle
- DTM (rounded rectangle shape).
Installation is carried out using bolts (included).
Connecting clamp
Necessary for connecting the muffler to the resonator. This is a metal ring with a rubber seal, tightened with bolts.
Rubber rings
Attach the muffler to the body. To replace you will need 3 rubber bands. When installing a new part, it is recommended to immediately change the rubber bands. Their service life is usually 2-3 years, and their low cost allows them to make repairs for future use.
Stinger VAZ 2115 exhaust 8 valves
21 customers chose this product
By purchasing a direct-flow exhaust kit, you will not have to select or purchase anything else, since the kit contains everything you need for installation.
Provides a power increase of 15 hp. One of the many important advantages of such a kit is the cost; by purchasing a graduation kit, you save about 20% of money rather than buying everything in parts.
The installation is carried out without any modifications in standard places (the old outlet was removed, a new one was installed).
How to make a replacement
The entire replacement of the VAZ 2114 spider takes place in several stages:
- Place the car on an overpass or pit, put the handbrake on and secure the wheels with stops (shoes).
- If the car has been running recently, let it cool down.
- Remove the crankcase protection.
- Unscrew the bolts securing the exhaust manifold pants to the catalyst inlet (to make unscrewing easier, they should be treated with WD-40 lubricant before starting work).
- If the replacement is partial, then leave the catalyst and muffler in place; if it is complete, then remove it.
- Unscrew the nuts securing the manifold to the cylinder head.
- Dismantle the “original” manifold and the gasket located under it.
- Install the spider instead of the standard manifold (if the spider matches the model, then it will definitely fit into its place). Before installation, you should place a new gasket under it.
- If the old fasteners are severely corroded, then new ones should be installed instead, preferably coated with copper or brass.
- If a partial replacement is performed, then you need to check the alignment of the spider pipe with the catalyst inlet. As a rule, the exhaust pipe of the spider is longer, so you will have to cut off and dismantle not only the catalyst, but also part of the exhaust pipe, instead of which a resonator should be welded.
- Connect the spider's output pipe to the resonator.
- If a complete replacement occurs, then the same operations are performed as in the previous paragraphs, but instead of the entire “original” exhaust system, a direct-flow exhaust system is installed.
After installing the spider, you will also have to replace the lambda probe (with a new one, with an extended wire). The completion of the entire modernization process will be the flashing of the ECU, which should be performed at a car service center. It will help register the new system in the computer as “standard”, and will also show the increase in power obtained as a result of the upgrade.
The kit includes:
- Spider exhaust gasket;
- Spider 4-2-1;
- The resonator is direct-flow;
- Muffler clamp;
- Universal oxygen sensor extension;
- The ring is graphite, reinforced with bolts and springs.
Attention! The graduation kit is sent only by a transport company due to its size! If you have doubts about the availability of a transport company in your city, leave this question to us, we will select the optimal company for you.
Kit: Spider, resonator, installation kit
Causes of malfunction
Why does this element fail? There are several reasons for this. Firstly, the muffler constantly heats up to high temperatures. Heating can reach 350 degrees Celsius or more. As a result, the aluminum-coated paint applied at the factory simply fades away. The muffler is also susceptible to corrosion. It is located in the area of the wheel arches, from where dirt and water constantly flow. Even installing fender liners doesn't help the situation. There may also be external deformations. You need to be careful on steep descents and climbs (especially if you have a lowered suspension). The muffler is the lowest point in the rear of the body, which is easily subject to impacts. In addition, the gases themselves create a destructive effect. The muffler vibrates when the engine is running. This also affects its resource. In order to somehow provide it with free movement, the design includes rubber cushions.
Taken together, all these reasons cause the muffler to burn out or crumble its walls. The rubber cushions also wear out and the mounting bolts break.
Product delivery options
Note! Below are the shipping methods available specifically for this product. Payment options may vary depending on the shipping method. Detailed information can be found on the “Delivery and Payment” page.
Transport companies
Available payment methods:
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Delivery is possible to any locality where there is a representative office of the transport company. Delivery time is from 2 to 10 days. Sending large parcels is approximately 50% more profitable than by Russian Post.
Pickup from our warehouse
Available payment methods:
- Cash upon receipt
- Credit, installments
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Pickup times must coincide with store opening hours.
Source
Difference between 2022 and 2020 models
In 2022, the range of model trim levels was expanded. They added a Style version - it was developed on the basis of the already released Prestige (2.0 liter turbo engine, all-wheel drive, leather interior, seat ventilation, rear camera and much more). The specifications of the configuration have been preserved, but new functions have been added.
The “Style” has a dark chrome decoration for the bumper, radiator grille and mirrors - previously this was only provided for the maximum versions (GT Line and GT).
By the way, the GT Line equipment has become the most purchased in Russia. It accounted for half of the Stinger's sales. It is logical that the new product copies the details of the GT Line.
A Harman/Kardon audio system was added inside. The body colors have changed - orange has appeared, which was previously sold only for the American market in the GTS configuration. Now this color can be ordered for any version of the Stinger. “Style” is more expensive than “Prestige”, but not too much - this has increased the popularity and sales of the model.
Direct-flow main muffler “StinGer” VAZ 2115
Name:
Direct-flow main muffler “StinGer” VAZ 2115.
The pipe coming out from under the bumper is made of STAINLESS steel diameter 51 mm.
Purpose:
Designed to reduce noise from gases or air escaping into the atmosphere from the engine exhaust manifold. StinGer mufflers make it possible to increase the power of a car engine compared to standard mufflers, because... their design allows exhaust gases to flow with less resistance. In addition, tuning enthusiasts will be interested in the fact that the sound of StinGer mufflers is more pleasant, not loud or ringing.
The production of exhaust systems and their components is one of the main activities of Stinger LLC. “StinGer” mufflers are part of the direct-flow exhaust that we offer you. It has proven itself excellent both in urban conditions and in sports. The “StinGer” exhaust system has become quite popular in Russia, so we offer exhaust systems and their components to wholesale buyers at wholesale prices.
Specifications:
- Material steel 08 PS. STAINLESS STEEL end pipe.
- Outer diameter 140 mm;
- Inner diameter 51mm;
- Barrel length 480mm;
- Wall thickness 1.5mm
Installation:
Installation with a standard resonator or a Stinger resonator is carried out without welding. During installation, standard clamps are used.
Source
What is needed for replacement
In order to install the spider on a VAZ 2114, you will need a minimum set of tools and accessories, namely:
- set of keys;
- angle grinder (grinder) - in some cases;
- cutting discs for angle grinders;
- welding machine - in some cases;
- WD-40 composition;
- new fasteners for the exhaust system;
- new lambda probe (equipped with an extended wire).
In addition, when installing the spider, you should also replace the exhaust manifold gasket.
As for choosing a spider manufacturer, you should give preference to the Stinger company, since its products are of high quality and have long been popular among motorists. In addition, you can purchase parts from other companies, but preference should be given to the middle or high price range. You should not purchase cheap spiders, as low-quality products can quickly fail.
Official recommendations
Naturally, the manufacturer recommends installing silencers made by AvtoVAZAgregat of the appropriate modification. The recommendations are justified by the following arguments:
- Compared to competitive products, jammers weigh more. According to factory workers, this means that their walls are thicker and will last longer (3-5 times, according to the manufacturer).
- The insides of the muffler are filled with special cotton wool, which collects condensation and prevents it from causing corrosion.
We cooperate with:
PEC
Find the nearest representative office, track the cargo and calculate the cost of delivery pecom.ru
Find the nearest representative office, track the cargo and calculate the cost of delivery dellin.ru
Find the nearest representative office, track the cargo and calculate the cost of delivery baikalsr.ru
Find the nearest representative office, track the cargo and calculate the cost of delivery nrg-tk.ru
Find the nearest representative office, track the cargo and calculate the cost of delivery tk-kit.ru
Find the nearest representative office, track the cargo and calculate the cost of delivery jde.ru
Russian federal company for the transportation of consolidated cargo. The geography of cargo transportation is all over Russia. Road freight transportation provides regular and express services.
Find the nearest representative office, track the cargo and calculate the cost of delivery vozovoz.ru
Find the nearest representative office, track the cargo and calculate the cost of delivery cdek.ru
Deadline for order delivery to T.K. from 1 to 4 business days from the date of receipt of funds.
Lead time for orders including painting services: 3-8 business days.
The lead time for placing orders and “made to order” items is from 14 days; you can check with the manager for more detailed information.
Delivery is carried out throughout Russia and the CIS.
Orders for pickup are placed on the website, the formation time is on average 1-4 business days, after the items arrive at the pickup point, the manager will notify you when you can receive your order.
ATTENTION! All fragile goods (headlights, plastic products, glass, etc.), by default, are sent in additional paid packaging from TK. If you take responsibility for the integrity, we can ship without it. To do this, you need to make a note in the comments when placing your order. For additional information, please contact the managers.
I decided to change the exhaust system. I want to install stinger sport subaru sound. What are the pros and cons? VAZ 2112. Subaru sound.
Similar articles
36 comments on “Subaru sound. I want to install stinger sport subaru sound”
this still won't make the car a Subaru
And she won’t go better either.
you don't need a stinger, take STT
The only advantage is to get fucked in front of the boys, but otherwise there are only disadvantages.
Don't install it, the valves will burn. I installed a simple 4-2-1
I heard the exhaust in the snail is heating up, there is no need to torture the car
More power, more pleasant sound
write what are the disadvantages... give reasons...
