Payment for goods and downloading of the book in electronic form (PDF format) is made on the website.
To do this, you need to find the book you are interested in and click on the “Buy” button. The price of the book is indicated on the button.
For convenience, the price on the website for residents of Russia, Belarus and Kazakhstan is presented in rubles.
For residents of Ukraine in hryvnias, and for all other countries - dollars.
After clicking on the “BUY” button, a payment window will open where you can select a payment system with which you can pay for the selected book using any bank card (Visa, MasterCard, MIR, etc.)
When you click on the “Pay by bank card” button, the Portmone payment system will open, which is the easiest way to make a payment.
In addition, the website offers four payment systems for payment:
- Yandex (payment from any bank cards, Yandex Money account, QIWI Wallet, terminals, etc.);
- Portmone (payment from any bank cards, Portmone account);
- PayPal (payment from any bank cards, PayPal account);
- WebMoney (payment from any bank cards, payment from WebMoney wallets).
Payment via Yandex Cashier
After selecting payment via Yandex, the Yandex Cashier payment system will launch, where you need to select a convenient payment method (bank card, QIWI, Yandex Money account, etc.)
After specifying payment details and confirming payment, payment for the goods will occur.
If you have a bank card in a currency other than the ruble, then the money will be debited from the card at the rate of the Central Bank of Russia at the time of the purchase.
This payment method is optimal for residents of Russia, Kazakhstan and Belarus.
Official website of the Yandex Kassa payment system https://kassa.yandex.ru
Troubleshooting
What to do if even after replacing the low beam lamp does not light up? The cause may be blown fuses. Replacing them is even easier than changing light bulbs.
The fuses are located in the passenger compartment, to the left of the steering column. Fuses such as F9 (left headlight) and F10 (right) are responsible for the light.
The causes of failure are not always visual, so it is better to replace the required fuse. One of the reasons is poor-quality contacts of the fuse terminals. You can simply clean them out.
The Lada Largus does not have a low beam relay, so the reason may also be in the contacts of the headlights. They could oxidize or burn out. Poor contact of the machine ground wire is also possible. This reason can also be solved by cleaning.
If after the inspection you still have problems with the low beam, contact a specialist.
There is a special offer on our website. You can get a free consultation with our corporate lawyer by simply submitting your question in the form below.
Car headlights are designed to provide a full view of the road at night. The proper condition of all lighting sources on the car is a necessary condition for safety while driving. Traffic regulations set very strict requirements for the serviceability of headlights. A driver who does not comply with them is subject to a fine.
Headlights on Lada Largus may have the following types of problems:
- burnt out lamps;
- broken lamps;
- cracks on the surface of the optics;
- dimming of lights;
- incorrect formation of the light beam, etc.
The reasons for these problems may vary. Clouding of the optics is caused by the matting effect of dust particles in the oncoming air flow; cracks and broken lamps are usually the result of a collision with an obstacle while driving. Scratches on the surface of the optics can be the result of driving on roads with bushes and trees with spreading branches growing on the sides.
Driving with headlights that have any of the above factors is unacceptable. To carry out repairs, you can contact a service station, where qualified technicians will provide you with the required assistance. But car service costs money - not all vehicle owners are ready to incur financial expenses.
If you want to avoid spending money, try doing it yourself. On Lada Largus cars, replacing lamps and lights does not cause any particular difficulties. And use the information you glean from this article as a guide.
Payment via Portmone
After selecting payment through Portmone, the payment system will launch, where you need to select the payment method: bank card or Portmone account.
The price in the Portmone payment system is converted into dollars at the exchange rate of the Central Bank of the country where you are located.
If you have a bank card in a currency other than the dollar, then the money will be debited from the card at the rate of the Central Bank of your country at the time of the purchase.
After specifying payment details and confirming payment, payment for the goods will occur.
Official website of the Portmone payment system https://www.portmone.com
Reasons for poor lighting even after adjusting the headlights
- Cloudiness of the plastic shell results in poor light dispersion. There are two solutions here - buying new optical elements or polishing, which, by the way, you can even do yourself. For this purpose, a grinding machine is used, during breaks in which the plastic is washed to the desired level of transparency.
- The characteristics of headlights also affect the quality of illumination, since some are equipped with more powerful bulbs, while others have less. In this case, some use xenon “support”, which provides the proper luminous flux with minimal power.
- Cracks in glass can cause light to refract incorrectly. Here either its “reanimation” or complete replacement should help. In any case, this is one of the most expensive repairs, so it is better to periodically check the glass for mechanical damage.
Payment via PayPal
After selecting payment via PayPal, the PayPal payment system will launch, where you need to select the payment method: bank card or PayPal account.
If you already have a PayPal account, then you need to log into it and make a payment.
If you do not have a PayPal account and you want to pay using a bank card via PayPal, you need to click on the “Create an Account” button - shown with an arrow in the picture.
PayPal will then prompt you to select your country and provide your credit card information.
After specifying the information required to make the payment, you must click on the “Pay Now” button.
Official website of the PayPal payment system https://www.paypal.com
Brake lights don't work - what's the danger?
This is a serious failure that can lead to driving safety problems because other motorists in traffic behind you will no longer be aware that your vehicle is braking. As a result, the distance between cars will be broken, which is unsafe.
You can find detailed installation instructions here. You may also be interested in an article about replacing generator brushes.
If an emergency occurs, the culprit will most likely be the owner of a car with a non-working brake light. As evidence, representatives of the road inspection use recordings from the video recorder, which is equipped with almost all modern cars.
What consequences can this lead to?
Brake lights, turn signals and side lights are very important, because they help ensure the safety of vehicles on congested highways. Thanks to them, other motorists can remotely determine the shape and size of the vehicle, as well as identify the maneuvers that you plan to carry out.
But fixing a situation with a faulty brake light is quite simple and most often it can be done without the help of specialists. The main thing is to determine the cause of the malfunction.
Payment via WebMoney
After selecting payment via WebMoney, the payment system will launch, where you need to select the payment method: bank card or WebMoney wallet.
If you already have a WebMoney wallet, then you need to log into it and make a payment.
If you do not have a WebMoney wallet and you want to pay in another way, you need to select any of the methods that WebMoney offers and make the payment
After specifying payment details and confirming payment, payment for the goods will occur.
Official website of the WebMoney payment system https://www.webmoney.ru/
Purpose of fuses in the block installed in the passenger compartment
Note: On various vehicle modifications, some of the fuses shown in the images may be missing.
more details:
Protected circuit | |||
F1 | 20 | Yellow | Windshield wiper, windshield wiper switch, heated tailgate relay |
F2 | 5 | Beige | Instrument cluster, fuel pump relay, engine control unit (ECU) |
F3 | 10 | Red | Brake light switch |
F4 | 10 | Red | Diagnostic connector, immobilizer antenna unit, body electrical control unit |
F5 | — | — | Reserve |
F6 | — | — | Reserve |
F7 | — | — | Reserve |
F8 | — | — | Reserve |
F9 | 10 | Red | Instrument cluster, left low beam |
F10 | 10 | Red | Middle sows right headlight |
F11 | 10 | Red | Instrument cluster, left high beam |
F12 | 10 | Red | High beam right headlight |
F13 | 30 | Green | Rear door window motors |
F14 | 30 | Green | Front door power window motors |
F15 | 10 | Red | ABS electronic control unit, acceleration sensors, steering angle sensor |
F16 | 15 | Blue | Electrically heated front seats |
F17 | 15 | Blue | Sound signal |
F18 | 10 | Red | Left front and rear parking lights |
F19 | 10 | Red | Right front and rear parking lights, glove compartment lighting, instrument cluster lighting, hazard warning switch, HVAC control unit, audio system, cigarette lighter, central locking switch, front door power window switches, license plate lights, right lights front and rear position lights |
F20 | 7,5 | Brown | Rear fog light |
F21 | 5 | Beige | Electrically heated exterior mirrors |
F22 | — | Reserve | |
F23 | — | — | Reserve |
F24 | Reserve | ||
F25 | — | Reserve | |
F26 | 5 | Beige | SRS system |
F27 | 20 | Yellow | Tailgate wiper motor, horn, TDC sensor, reverse light switch |
F28 | 15 | Blue | Interior electrical control unit (energy saving mode) |
F29 | 15 | Blue | Interior electrical control unit, diagnostic connector |
F30 | 20 | Yellow | Interior electrical control unit |
F31 | 15 | Blue | Fog lights, fog light relay |
F32 | 30 | Green | Heated tailgate glass |
F33 | — | Reserve | |
F34 | — | Reserve | |
F35 | — | Reserve | |
F36 | 30 | Green | Electric motor for heating, air conditioning and ventilation systems |
F37 | 5 | Beige | Electric exterior mirrors |
F38 | 15 | Blue | Audio system, cigarette lighter |
F39 | 10 | Red | HVAC Motor Relay |
Heated rear window relay (interior)
Relay view (dashboard removed for clarity)
The rear window heating relay (40A) is located in the passenger compartment, under the instrument panel. (to the left of the steering column, above the interior mounting block). To replace it you need to remove the instrument cluster.
Press the latch and disconnect the relay from the holder.
Downloading a book
After successfully completing the payment (by any method) and returning to the KrutilVertel store from the payment system website, you will be taken to the successful payment page:
On this page you need to indicate your e-mail, where access to download the book will be sent.
If you are already registered on our website, then simply follow the link to your personal account.
The book you purchased will be in your personal account, from where you can always download it.
Please note that after making the payment, you need to return back from the payment system website to the KrutilVertel website.
If for some reason you did not return back to the site and closed the payment system tab with a message about the successful completion of the payment, please let us know - we will send you a letter indicating access to download the book.
Headlight adjustment
Car owners know that the procedure for adjusting Largus headlights with your own hands is not the fastest and easiest process. But it is extremely important, since the safety of those in the cabin depends on the correct setting of the light. The fact that there is a need to adjust the lighting of the head optics may be indicated by the signals of oncoming cars: they will flash their high beams, indicating that you are blinding them.
Before you start setting up, you need to make sure that it is necessary. The correct light is ensured by the following conditions:
- good condition of shock absorbers;
- optimal tire size and pressure;
- uniform distribution of load on different parts of the body.
If these criteria are deviated, the glow angle will be incorrect. If the problems described above are not identified, then you can safely move on to adjusting the light.
Problems when paying with bank cards
Sometimes difficulties may arise when paying with Visa/MasterCard bank cards. The most common of them:
- There is a restriction on the card for paying for online purchases
- A plastic card is not intended for making payments online.
- The plastic card is not activated for making payments online.
- There are not enough funds on the plastic card.
In order to solve these problems, you need to call or write to the technical support of the bank where you are served. Bank specialists will help you resolve them and make payments.
That's basically it. The entire process of paying for a book in PDF format on car repair on our website takes 1-2 minutes.
If you still have any questions, you can ask them using the feedback form, or write us an email at [email protected]
Removing the rear lights of a Lada Largus car
We prepare the vehicle for work.
Disconnect the negative terminal of the battery. Open the rear doors of the car.
Remove the mesh (when removing the rear light from the right wing) (if equipped).
We remove the jack (when removing the rear light from the right wing).
We unscrew two nuts 1, 3, securing the right or left rear light to the car body
Disconnect block 2 of the rear wiring harness from the right or left lamp.
Remove lamp 1 right or left
Release clamps 2 and remove the board from the rear light housing
To replace rear light bulbs, you must turn the corresponding bulb counterclockwise, remove it and replace the bulb.
Check the operation of the flashlight.
Installation
Install the rear light onto the fender using the locating pins.
Install the rear light in the reverse order of removal.
At the same time, ensure a seal between the canopy and the body.
Place the jack in place (when removing the right wing rear light).
2283-15-14-10
Each lamp holder socket is marked with the type of lamp.
Each lamp holder socket is marked with the type of lamp. Each lamp holder socket is marked with the type of lamp.
Install the rear light in the reverse order.
[How to save on maintenance of Lada Largus] [Maintenance of Lada Largus at 15,000/45,000/75,000/105,000 km] [Maintenance of Lada Largus at 30 thousand km] [Maintenance of Lada Largus at 60 thousand km of run] [Maintenance of Lada Largus for 90 thousand km of run] [Maintenance of Lada Largus for 120 thousand km of run] [Independent maintenance - general recommendations] [Safety rules for self-carrying out maintenance] [Tools required for carrying out maintenance Lada Largus maintenance] [Lamps used in the Lada Largus car]
Changing the lamps in the rear light of Lada Largus