Do-it-yourself tuning of VAZ 2114 rear lights and ready-made solutions

One of the most popular domestically produced hatchbacks among car enthusiasts is the VAZ-2114 model. But this car is very far from ideal, and the owners themselves have to bring it to perfection. And they do this through alterations and upgrades, which concern not only the technical part, but also the appearance. One of the elements that undergoes any changes is the optics on VAZs. Many people are not entirely satisfied with the standard lighting equipment, so they make their own adjustments, including in the rear lights of the VAZ-2114. Note that some modifications not only change the appearance, they also increase the efficiency of the rear headlights of the VAZ-2114, which makes the signals they emit even more noticeable. Therefore, tuning the rear lights is not such a useless matter, since it also improves safety. The model of the domestic automaker VAZ 2114 was literally created for tuning and modifications. A number of external changes allow you to transform the car and give it new colors. Some go further, and in addition to external tuning, they use methods to improve technical characteristics. With the advent of LEDs, the development of tuning rushed forward sharply. More and more new and unique solutions began to appear; no other light bulbs can achieve such a visual effect as diodes. Using LEDs you can decorate the interior, doors, and optics. If it is now fashionable to install so-called angel eyes in front, then special elements based on diodes are most often mounted for the rear lights. LEDs have not only decorative, but also practical properties. Due to them, safety increases, since the level of luminescence is higher. But most importantly, such an option for modifying optics is permitted by the legislation of our country and not only that.

What light bulbs are installed on VAZ 2114, 2113, 2115?

Functionality check

Before blaming the sensor for the malfunction of the reverse signals, make sure that the device has actually lost its functionality. To do this, run the diagnostics:

• Turn the wheels to the left all the way and look at the sensor from the driver’s side - there is a protection on the side of the gearbox, and contacts inside it;
• Remove this protection and inspect the device. There are also two contacts going to the sensor;
• Close the contacts on the frog limit switches (this is the same reverse sensor) and start the engine, engaging reverse gear;
• If everything is fine, the wires and contacts are working properly, then the white headlights will turn on;
• If the headlights do not light, use a tester to check the voltage on the wire (orange) and ground;
• If there is voltage, check the light bulb board and the quality of the contacts.

Instrument lamps VAZ 2114, 2113, 2115

Light bulb for lower panel glove compartment

Designation (article number) of the glove box light bulb:

• According to the classification of the Eurasian Economic Commission (EEC) - C5W
• According to GOST - AS12-5-1.

Bulb dimensions AC12-5-1 (C5W):

• Length - 35 mm;
• Diameter - 11 mm.
• The diameter of the base is 8.5 mm.

Technical characteristics of the glove compartment light bulb for VAZ 2114, 2113, 2115:

• Power - 5 W;
• Base - metal 2 pcs;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the AC12-5-1 (C5W) glove box illumination bulb for VAZ 2114, 2113, 2115:

Ashtray light on dashboard

Designation (article number) of the ashtray light bulb on the dashboard of VAZ 2114, 2113, 2115:

• According to the classification of the Eurasian Economic Commission (EEC) - W2x4.6d
• According to GOST - AS12-1,2.

Dimensions of the AC12-1.2 (W2x4.6d) ashtray light bulb:

• Length - 20 mm;
• Diameter - 5 mm.
• The diameter of the base is 4.6 mm.

Technical characteristics of the ashtray light bulb for VAZ 2114, 2113, 2115:

• Power - 1.2 W;
• Base - glass;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the AC12-1.2 (W2x4.6d) ashtray light bulb for VAZ 2114, 2113, 2115:

Lamps for illuminating the symbols of key switches and their indicators

Designation (article number) of the backlight bulb for the key switches on the dashboard of VAZ 2114, 2113, 2115:

• According to GOST - ASMN12-0.55.

Dimensions of the ASMN12-0.55 light bulb for backlighting the key switches on the dashboard:

Technical characteristics of the backlight bulb for key switches VAZ 2114, 2113, 2115:

• Power - 0.55 W;
• Base - wire antennae;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the ASMN12-0.55 light bulb for the illumination of key switches VAZ 2114, 2113, 2115:

Instrument cluster lights

Designation (article number) of the instrument cluster illumination bulb for VAZ 2114, 2113, 2115:

• According to GOST - A12-1.2.
• According to the classification of the Eurasian Economic Commission (EEC) - W2x4.6d

Dimensions of the A12-1.2 (W2x4.6d) light bulb for the instrument cluster illumination:

• Length - 20 mm;
• Diameter - 5 mm.
• The diameter of the base is 4.6 mm.

Technical characteristics of the bulb A12-1.2 (W2x4.6d) for illuminating the instrument cluster of VAZ 2114, 2113, 2115:

• Power - 1.2 W;
• Base - glass;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the A12-1.2 (W2x4.6d) light bulb for the instrument cluster illumination of VAZ 2114, 2113, 2115:

Cigarette lighter lamp

Designation (article number) of the cigarette lighter light bulb for VAZ 2114, 2113, 2115:

• According to GOST - A12-4-1.
• According to the classification of the Eurasian Economic Commission (EEC) - T4W

Dimensions of the A12-4-1 (T4W) cigarette lighter light bulb for VAZ 2114, 2113, 2115:

• Length - 26 mm;
• Diameter - 9.2 mm.
• The diameter of the base is 9.1 mm.

Technical characteristics of the A12-4-1 (T4W) cigarette lighter light bulb for VAZ 2114, 2113, 2115:

• Power - 4 W;
• The base is metal;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the A12-4-1 (T4W) cigarette lighter light bulb for VAZ 2114, 2113, 2115:

Breakdowns

If the rear headlight unit fails, it is often due to a broken bulb from a particular light, or a problem with the fuses.

A rarer type of failure is a broken wiring.

It should be understood that each element of the rear optics plays its own irreplaceable role, therefore it is necessary to maintain the required level of performance of the optics and promptly respond to emerging malfunctions.

Before long trips, be sure to make sure that all the lamps in your car are working properly. In the event of an accident caused by non-functioning taillights, do not count on insurance. She won't act.

Light bulb sizes 2114, 2113, 2115

Front light bulb for VAZ 2114, 2113, 2115

Designation (article) of the front light bulbs for VAZ 2114, 2113, 2115:

• According to GOST - A12-4-1.
• According to the classification of the Eurasian Economic Commission (EEC) - T4W

Dimensions of the bulb A12-4-1 (T4W) for the front dimensions of VAZ 2114, 2113, 2115:

• Length - 26 mm;
• Diameter - 9.2 mm.
• The diameter of the base is 9.1 mm.

Technical characteristics of the A12-4-1 (T4W) light bulb for the front dimensions of the VAZ 2114, 2113, 2115:

• Power - 4 W;
• The base is metal;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the A12-4-1 (T4W) light bulb for the front dimensions of the VAZ 2114, 2113, 2115:

Tail light bulb

Designation (article number) of the rear light bulbs of VAZ 2114, 2113, 2115:

• According to GOST - A12-4-1.
• According to the classification of the Eurasian Economic Commission (EEC) - T4W

Dimensions of the A12-4-1 (T4W) rear light bulb for VAZ 2114, 2113, 2115:

• Length - 26 mm;
• Diameter - 9.2 mm.
• The diameter of the base is 9.1 mm.

Technical characteristics of the A12-4-1 (T4W) rear light bulb for VAZ 2114, 2113, 2115:

• Power - 4 W;
• The base is metal;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the A12-4-1 (T4W) rear light bulb for VAZ 2114, 2113, 2115:

Why don't FZH work?

There are several reasons why FZHs can fail. Let's try to understand them.

Cause of malfunction

What to do

Replace the burnt out bulb with a new one, check the condition of the contacts

Check, replace if necessary. A fuse can lead to loss of functionality of the entire contact circuit

There is no ground on the board

The board is located under the lamp. Simple repair to fix the problem

The contacts have oxidized and become coated

Rear lamps VAZ 2114, 2113, 2115

Rear turn signal lamp

Designation (article number) of the rear direction indicator lamp for VAZ 2114, 2113, 2115:

• According to GOST - A12-21-3.
• According to the classification of the Eurasian Economic Commission (EEC) - P21W

Dimensions of the A12-21-3 (P21W) rear turn signal bulb for VAZ 2114, 2113, 2115:

• Length - 52.5 mm;
• The diameter of the flask is 26.5 mm.
• The size from the base stop to the top of the lamp is 45 mm.

Technical characteristics of the rear lamp A12-21-3 (P21W) of the direction indicator VAZ 2114, 2113, 2115:

• Power - 21 W;
• The base is metal;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the rear lamp A12-21-3 (P21W) of the direction indicator VAZ 2114, 2113, 2115:

Reversing light bulb VAZ 2114, 2113, 2115

Designation (article number) of the reverse light bulb VAZ 2114, 2113, 2115:

• According to GOST - A12-21-3.
• According to the classification of the Eurasian Economic Commission (EEC) - P21W

Dimensions of the A12-21-3 (P21W) reversing light bulb for VAZ 2114, 2113, 2115:

• Length - 52.5 mm;
• The diameter of the flask is 26.5 mm.
• The size from the base stop to the top of the lamp is 45 mm.

Technical characteristics of the A12-21-3 (P21W) reversing light bulb for VAZ 2114, 2113, 2115:

• Power - 21 W;
• The base is metal;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the rear lamp A12-21-3 (P21W) of the reversing light VAZ 2114, 2113, 2115:

Electric fog lamp

Designation (article) of the rear fog light bulb VAZ 2114, 2113, 2115:

• According to GOST - A12-21-3.
• According to the classification of the Eurasian Economic Commission (EEC) - P21W

Dimensions of the rear fog light bulb A12-21-3 (P21W) VAZ 2114, 2113, 2115:

• Length - 52.5 mm;
• The diameter of the flask is 26.5 mm.
• The size from the base stop to the top of the lamp is 45 mm.

Technical characteristics of the rear fog light bulb A12-21-3 (P21W) VAZ 2114, 2113, 2115:

• Power - 21 W;
• The base is metal;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the rear fog light bulb A12-21-3 (P21W) VAZ 2114, 2113, 2115:

Rear brake light

Designation (article) of the rear brake light bulb VAZ 2114, 2113, 2115:

• According to GOST - A12-21-3.
• According to the classification of the Eurasian Economic Commission (EEC) - P21W

Dimensions of the rear light bulb A12-21-3 (P21W) of the brake light for VAZ 2114, 2113, 2115:

• Length - 52.5 mm;
• The diameter of the flask is 26.5 mm.
• The size from the base stop to the top of the lamp is 45 mm.

Technical characteristics of the rear brake light bulb A12-21-3 (P21W) VAZ 2114, 2113, 2115:

• Power - 21 W;
• The base is metal;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the rear brake light bulb A12-21-3 (P21W) VAZ 2114, 2113, 2115:

DIY tuning

Option 1

The first step was to buy lanterns with completely transparent glass and disassemble them.

After this, you need to prepare a site for the LEDs. Plexiglas is best suited for this. We come up with a form and print it on a piece of paper.

Next, you should mark the holes to drill them straight. You can also contact your advertising development company with a similar question. They make various parts from PVC, they have a machine for smooth cutting. You need to provide an already drawn file in the program and everything will be cut out exactly for you.

Afterwards we arrange the purchased LEDs in their places and glue them in. You can use a glue gun for this. We solder the LEDs together according to the meaning of their operation. Turn signals are separate, reverse is separate and brake lights are separate.

The next step is preparing the body of the lantern itself. We solder and coat all excess holes with sealant. In this case, everything depends on the donor; look and prepare the case so that nothing gets into it during operation. We assemble everything into one body and install it in place. Remember that in this option everything is limited only by your imagination. Of course, it is better to darken the glass to hide all the defects inside it and improve the appearance. The LEDs are bright enough, so you will be visible in any case.

The finished work looks like this.

Option #2

In this case, the approximate work on preparing the rear lights is similar to the previous one, but instead of individual LEDs, they used LED strip and additionally glued it with glue for strength. It looks like this:

This option will be much smoother and you can even draw a small figure this way. Also in stores you can find ready-made LED circles and other shapes, which can simply be glued to a prepared surface and assembled.

You can make almost any design that suits your taste and your imagination. You can diversify the taillights using homemade trims. Making them is not that difficult, especially if you have the skill to work with polyester resin and body parts. This is done in several steps:

1. We remove the lamp from the car and seal it on top with masking tape in two layers.
2. First, we draw the shape of the future overlays on tape, so that we can then cut them exactly relative to each other. Even after applying resin to the part, this outline will be visible.
3. Then we begin to lay it in one layer of fiberglass, impregnating it with resin.

4. We remove the prepared form from the lantern and process it along the contour already drawn in advance. This can be done with an engraver, grinder, grinder or manually with sandpaper.
5. We treat the part with putty, sand it, prime it and paint it in the body color. You'll get something like this.

There are a large number of ways to make your car stand out in traffic. Installing new lights is one of the most affordable options for everyone. Here everything depends only on your imagination, but remember that there are limits that should be observed so that you do not have questions from the traffic police officers. The tuned headlights on the VAZ 2114 look very impressive, but they should definitely be informative for other road users. You must not pose a threat on the road or create emergency situations.

How to replace a light bulb in a rear light?

To replace the light bulb in the rear light of a VAZ 2114, 2113, 2115 passenger car, you must perform the following steps:

1. To access the rear light, you need to remove the trim. To do this, first unscrew the top screw with a Phillips screwdriver.
2. Then unscrew the bottom screw
3. After this, unscrew 2 more screws and remove the trim panel
4. After this, remove the terminal connector
5. Then, pressing the latch, remove the electrical board with the rear light bulbs
6. After this, pressing the lamp towards its socket and turning it counterclockwise, remove the desired lamp

Possible malfunctions of brake lights and their elimination

If the brake lights do not light up, there may be several reasons for this:

1. The light bulbs themselves have failed and will need to be replaced.
2. There are problems with the wiring. It is necessary to ring the on-board network in the area from the brake lights. If there are breaks, the wiring must be replaced.
3. Oxidized contacts. In this case, the contacts just need to be cleaned.
4. The fuse has blown. Check the integrity of all safety elements responsible for the operation of the optics (including relays) and replace burnt parts.

Sorry, there are no surveys available at this time.

Headlight bulbs 2114, 2113, 2115

Low and low beam lamp

Designation (article) of the headlight bulb AKG12-60+55-1 for high and low beam VAZ 2114, 2113, 2115:

• According to GOST - AKG12-60+55-1.
• According to the classification of the Eurasian Economic Commission (EEC) - H4

Dimensions of the AKG12-60+55-1 (H4) headlight bulb for high and low beam VAZ 2114, 2113, 2115:

• Length - 81.1 mm;
• The height of the base is 32 mm.
• The size from the base stop to the filament is 28.5 mm.

Technical characteristics of the AKG12-60+55-1 (H4) light bulb for high and low beam headlights VAZ 2114, 2113, 2115:

• Power - 60/55 W;
• The base is metal;
• Lamp - neon;
• The flask is transparent glass;

Installation location of the AKG12-60+55-1 (H4) light bulb for high and low beam headlights VAZ 2114, 2113, 2115:

Turn signal light bulb VAZ 2114, 2113, 2115

Designation (article number) of the direction indicator bulb in the headlight of VAZ 2114, 2113, 2115:

• According to GOST - A12-21-3.
• According to the classification of the Eurasian Economic Commission (EEC) - P21W

Dimensions of the A12-21-3 (P21W) turn signal light bulb for VAZ 2114, 2113, 2115:

• Length - 52.5 mm;
• The diameter of the flask is 26.5 mm.
• The size from the base stop to the top of the lamp is 45 mm.

Technical characteristics of the A12-21-3 (P21W) light bulb for the direction indicator headlights VAZ 2114, 2113, 2115:

• Power - 21 W;
• The base is metal;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the A12-21-3 (P21W) turn signal headlight bulb for VAZ 2114, 2113, 2115:

Manufacturers of lamps for VAZ 2114

Since lamps with an H4 socket are used in headlights of many models from different manufacturers, all manufacturers of car lamps produce such lamps. Among them are the following companies:

1. A world-famous Dutch company, known for its low prices and good quality products;
2. A German company with a long history and rich technological experience;
3. Narva. This is another manufacturer from Germany, known for the quality and durability of its products;
4. Bosh. Another German company that does not need any special introduction;
5. Company based in Hong Kong and Germany. Produces a wide range of reliable lighting equipment.

The above list can be continued for a long time. Today, a big name of a manufacturer is not a guarantee of high quality and reliability. There are a lot of fakes on the market, which are not only cheap, but also completely inconsistent with the original. Therefore, it is better to make a choice based not on the name, but on the characteristics of the light bulbs.

How to replace low/high beam bulbs on a Lada Granta, step-by-step instructions

LED bulbs H4 6000K (VAZ 2114) - Review, test.

How to replace a headlight bulb?

To replace the light bulb in the headlight of a VAZ 2114, 2113, 2115 car, you need to perform the following operations:

1. First you need to unscrew the 2 screws with plastic heads that secure the headlight cover.
2. After this, remove the cap
3. Next, disconnect the terminal block from the headlight high and low beam lamps
4. Then, turning counterclockwise, dismantle the clamping frame of the headlight lamp
5. After this we will remove the headlight bulb from its socket.
   

   When changing a halogen lamp for high and low beam, do not touch its bulb with your fingers. If you touch it, wipe the flask with a clean cloth moistened with alcohol.

6. To replace the headlight bulb located in the headlight, you must remove it together with the socket from the headlight reflector
7. Then turn the size bulb counterclockwise and remove it from the socket
8. We install the headlight bulbs in the reverse order.

Tuning optics VAZ 2113, 2114, 2115

Tuning optics is not difficult, even if you are relatively new to this matter. The main thing here is to first decide which option for modifying the rear headlights you want to use for your VAZ 2114. Today, several basic ideas are especially popular.

From a cost-saving point of view, purchasing individual LEDs will be more profitable than purchasing finished products. But in this case, you must be sure that you will be able to get high quality devices. Otherwise, it’s better not to take risks and spend more money.

•
LED overlays
. Today, LED overlays are the most common option for tuning taillights with your own hands. At the same time, the vast majority of VAZ 2114 car owners prefer hand-made LED trims. There is a good reason for this - factory-made trims are not visually presentable and, for the most part, are not suitable for the lights of this car. Making LED overlays manually is not so difficult - just stock up on epoxy glue and fiberglass;

•
diode rings
. Since any tuning implies the ability to work with electrical devices, making diode rings should not cause problems even for a novice auto mechanic;

•
use of high power lamps
.
In most cases, this method is used before treating the glass with tint film, because the pure light of this type of lighting is too bright and can blind other road users. The effectiveness that such lamps create is offset by excessive fuel consumption and the prospect of overheating of the wiring. It is better not to use such tuning in relation to the VAZ 2114 car, since the power reserve of this car is below average; •
DIY installation of individual LEDs This method is the most creative; it opens up a wide field for imagination. Among the disadvantages is the extra time spent, which will inevitably entail developing a design and installing the LEDs themselves on the lights. One of the advantages is the reduced cost of separately purchased LEDs.

Interior lamps for VAZ 2114, 2113, 2115

Central interior light bulb

Designation (article number) of the central lamp bulb for interior lighting of VAZ 2114, 2113, 2115:

• According to GOST - AS12-5-1.
• According to the classification of the Eurasian Economic Commission (EEC) - C5W

Dimensions of the AC12-5-1 (C5W) bulb for the central interior lamp of VAZ 2114, 2113, 2115:

• Length - 35 mm;
• The diameter of the flask is 11 mm.
• The diameter of the base stop is 3.5 mm.

Technical characteristics of the AC12-5-1 (C5W) light bulb for the central interior lamp of VAZ 2114, 2113, 2115:

• Power - 5 W;
• The base is metal;
• The number of lamp bases is 2 pcs;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the AC12-5-1 (C5W) light bulb for the central interior lamp of VAZ 2114, 2113, 2115:

Front courtesy light bulb for VAZ 2114, 2113, 2115

Designation (article number) of the front interior lamp bulb of VAZ 2114, 2113, 2115:

• According to GOST - A12-4-1.
• According to the classification of the Eurasian Economic Commission (EEC) - T4W

Dimensions of the A12-4-1 (T4W) light bulb for the front interior lamp of VAZ 2114, 2113, 2115:

• Length - 26 mm;
• The diameter of the flask is 9.2 mm.
• The diameter of the base is 9.1 mm.

Technical characteristics of the A12-4-1 (T4W) light bulb for the front interior lamp of VAZ 2114, 2113, 2115:

• Power - 4 W;
• The base is metal;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the A12-4-1 (T4W) light bulb for the front interior lamp of VAZ 2114, 2113, 2115:

Side turn signal lamp VAZ 2114, 2113, 2115

Designation (article) of the side turn light bulbs VAZ 2114, 2113, 2115:

• According to GOST - A12-5-2.
• According to the classification of the Eurasian Economic Commission (EEC) - W5W

Dimensions of the A12-5-2 (W5W) side turn signal bulb for VAZ 2114, 2113, 2115:

• Length - 26.8 mm;
• The diameter of the flask is 10.29 mm.
• The size of the plinth seat is 6.1 mm.

Technical characteristics of the A12-5-2 (W5W) side turn signal bulb for VAZ 2114, 2113, 2115:

• Power - 5 W;
• Base - glass;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of the A12-5-2 (W5W) side turn signal bulb for VAZ 2114, 2113, 2115:

Fog light bulb

Designation (article number) of the fog light bulb for VAZ 2114, 2113, 2115:

• According to GOST - AKG12-55-1
• According to the classification of the Eurasian Economic Commission (EEC) - H1

Dimensions of the AKG12-55-1 (H1) fog light bulb for VAZ 2114, 2113, 2115:

• Length - 62.5 mm;
• The diameter of the flask is 8.5 mm.
• The size of the plinth seat is 18.5 mm.

Technical characteristics of the AKG12-55-1 (H1) fog light bulb for VAZ 2114, 2113, 2115:

• Power - 55 W;
• The base is metal;
• Lamp - hologen;
• The flask is transparent glass;

Installation location of AKG12-55-1 (H1) fog lamp VAZ 2114, 2113, 2115:

License plate lamp

Designation (article number) of the license plate light bulb for VAZ 2114, 2113, 2115:

• According to GOST - AS12-5-1
• According to the classification of the Eurasian Economic Commission (EEC) - C5W

Dimensions of the AC12-5-1 (C5W) light bulb for the license plate light for VAZ 2114, 2113, 2115:

• Length - 36 mm;
• The diameter of the flask is 11.5 mm.
• The diameter of the base is 8.5 mm.

Technical characteristics of the AC12-5-1 (C5W) light bulb for the lighting lamp number VAZ 2114, 2113, 2115:

• Power - 5 W;
• The base is metal;
• Number of socles - 2 pcs;
• Lamp - incandescent;
• The flask is transparent glass;

Installation location of AS12-5-1 (C5W) lighting lamp number VAZ 2114, 2113, 2115:

Reversing lights

Lamps, which are a light-signal element that notifies you when you are reversing, can significantly increase the level of safety on the road.

The turning on of the rear lights indicates that the car is moving backwards, so you should be careful. Non-working lights can easily lead to accidents and collisions, for which you will ultimately be the culprit.

What is this?

3X headlights are white lighting fixtures. They turn on when shifting into reverse gear.

The main function is to ensure safety while driving. They signal other drivers about your maneuvers and illuminate the road when parking in the dark.