Wheels on Priora: factory alloy Priora wheels in sizes r14, r15, r16 and r17

Which Priora wheels are best suited for regular use and which for seasonal use? Choosing the best option is quite difficult, but possible. Since the factory hubcaps and discs on the Priora become unusable quite quickly and this happens to many people, it is necessary to find a good replacement. So it’s worth paying attention to the characteristics of various disks, as well as the method of their production.

Disk specifics

The factory Lada Priora is equipped with 4 steel wheels with a diameter of 14 inches. To protect against damage, plastic caps are put on the discs. And it is because of them that disks have to be changed often for the following reasons:

1. The hubcaps often fall off when driving over uneven surfaces. A few hits, hitting a dozen holes - and the plastic flies off somewhere to the side while you continue to drive along the road. Upon arrival home, it turns out that the plastic protection has disappeared, and the discs are now “bare”.
2. The appearance of the Priora wheels also leaves much to be desired, and this is the second reason to replace the wheels.
3. Low technical characteristics. The rather large weight of the products negatively affects the overall handling of the vehicle, and also slightly increases fuel consumption during the trip.

After some time, when factory products completely lose their performance properties, you have to look for a replacement. The main parameter that is worth remembering right away is the size of the disks. The optimal one for Priora is R14; R15 models can also be installed on Priora without any problems; R16 is used less often.

What colors may be suitable for rims?

Before you paint your wheel products yourself, you need to think about how the chosen shade will combine with the vehicle body. For example, silver wheels will fit well on a white car. An alternative option is to emphasize the contrast and paint them matte black. For individual body elements, you can use a groove.

If the car has a silver color or “wet” metallic, then the disk elements are recommended to have an identical color with a milling groove. Passenger cars in burgundy, dark blue and bright yellow go perfectly with black rims or identical colors with a stripe along the rim.

For car enthusiasts who want to find a more universal option, painting the wheels in silver tones will become relevant. You can also use black metallic paint. It will give a beautiful appearance and additional shine to the disk surface.

Owners of black cars can use almost any color scheme to paint their wheels. In particular, it would be nice to combine red, bright yellow and golden tones. Organic and dark green. It is not recommended to paint it white, as it will cause dissonance with the exterior of the car.

Color plays an important role, but we should not forget about the quality of the paint and varnish material, since the durability of the chosen color scheme and the resistance of the paint to anti-corrosion influences depend on it.

By the way, the same can be said about the paintwork of the entire car - you need to choose only the best. For example, they offer a high-quality service - protective ceramic body coating.

Types of disks

Lada Priora comes with alloy steel wheels, but you can install others, depending on your preferences. The options are as follows:

1. Alloy wheels are standard factory products. They are the cheapest class among other types of wheels and are mainly used for the basic equipment of almost all economy class cars. They are not durable, have low resistance to impacts, and are practically irreparable.
2. To create stamped models, unlike cast ones, special alloys are used. Alloys can significantly improve the characteristics of finished products, which can be noticed during operation. Alloy models can be repaired by straightening, so their service life is several times longer than their cast counterparts. They cost more, but last longer.
3. But even the stamping method cannot create something more reliable than luxury forged wheels. The most expensive products have an extremely long service life - several years. In addition, they do not need to be repaired often, since they are quite difficult to bend or even scratch. They can withstand even the strongest impacts, so they are not afraid of uneven roads.

Installation of large diameter wheels

Standard Priora rims are size R14, so alloy wheels of this diameter are the most popular, the choice of patterns and colors is very wide. Installing them on a car does not present any difficulties and is done quite quickly, and the cost is quite affordable compared to products of large diameters. According to manufacturing technology, they are divided into 3 categories:

If you replace the R14 steel factory wheels with R15 light alloy rims, then this will be the most compromise solution for Lada Priora owners who want to change the car’s exterior as much as possible at minimal cost. As in the case of R14 wheels, installing R15 rims will not require any intervention in the car’s design, but the appearance will be much more remarkable. The only problem is to choose the right new product and tires for it.

Ideally, you should carefully try a new alloy wheel on your car right at the store. Depending on the configuration, you may need to purchase new, longer wheel bolts as they are not included with the rims. The tire size that can be recommended for installation on an R15 wheel is 195/50; it will not touch the suspension and body parts and is not low-profile enough.

What to look for when choosing

Among the main types, 2 will be priority for most - cheap alloy wheels and stamped ones.

Each type of disc has a marking that can tell you more about the features of the models:

1. The first thing that appears in the marking will be the number - this is a number that means the width of the disks in inches (for example, 5.5).
2. Next comes the letter abbreviation for the modification of the rim edges - B, D, K, J or P. There are more complex options JK, PP.
3. There may be an “x” after the edge information to indicate a non-separable design. If the disk is disassembled, then instead of an X there will be a “-”.
4. The next marking line will be the diameter in inches. Indicated by a two-digit number. In our case, 14-15 for Priora.
5. Next there will be a designation from the catalog about the features of the tire fastening, for example, H2.
6. The abbreviation denoting the number of fasteners and their diameter is “number of bolts x diameter of the circle in mm.” This parameter is important for proper mounting of discs to the Priora hub.
7. The last 2 designations - the size of the overhang and the size of the central hole - are not particularly important.

The marking of a suitable wheel on a Priora will look like this: 5.5 J x 15 H2 4×98 ET35 d58.5 - in this case these are alloy summer wheels.

Wheels for LADA Priora

For a long time, car owners could only equip their car with large and bulky stamped wheels, which were not unattractive.

Fortunately, today the situation has changed significantly, and customers are presented with a wide selection of disks from different manufacturers and different designs. Modifications have appeared that are lightweight with high levels of strength, reliability and service life.

One of the most suitable designs in terms of design, quality and lightness are alloy wheels.

They are made from high-quality alloys, characterized by protection against corrosion processes, low weight and numerous design incarnations. Alloy wheels cannot be repaired if damaged, but are still one of the most popular.

In modern conditions, there is a wide range of aluminum rims for LADA Priora from various manufacturers. However, you need to know that when choosing disk products, you should definitely follow the factory recommendations regarding the size of the disks.

Buying disks that are too large or small and do not match the specifications will have negative consequences:

• fuel consumption increases noticeably;
• the wear rate of the suspension increases;
• maneuverability and controllability become smaller.

Our store allows you to select wheels automatically using a special catalog. Wheel rim selection is made based on various values, including:

• mounting size, which must be completely consistent with the internal size of the tire;
• the number of holes for installation, as well as their size - the disk designation system must match that indicated in the manual;
• wheel offset - the distance from the wheel mount to the symmetrical plane. If it is wide with a small offset, then this will give the car additional stability and presentation, but it increases the impact on the hubs;
• rim width - it determines riding comfort and speed.

To select the appropriate wheel size, simply enter the modification and year of production of the vehicle. The system itself will determine the disks that best match these indicators. If you have any questions, you can contact the support service - our consultants will provide the most comprehensive information, as well as assistance in selecting the right equipment.

Source: https://www.dilijans.org/avto-podbor/VAZ—Priora.html

Tire selection

When changing wheels, do not forget about the tire size. If you are going to take an R15 on a Priora, then the optimal tire size you will need is 190/50, but there are as many as 10 other options. On 15 wheels, such tires are the best solution that can be found. The size is excellent, since the tire will not touch body parts and suspension, but will also last a long time in operation, although it is low-profile.

Tire size will affect the vehicle's performance on the road, so choose only the appropriate options. You should not rush to buy them; also evaluate the material used and the manufacturer. Summer tires should be thinner, and winter tires, on the contrary, should be thicker. There are almost 2 dozen tires on Priora that are installed with R14 wheels. and a few R16s for those who like to experiment, so you're sure to find something if you have the catalog to match.

How to choose the right wheel size for a Lada Priora

In order for the car owner to make the right choice and purchase exactly the wheels he needs, he must know a few simple rules regarding this brand of car, in particular:

• All wheels on the Lada Priora, regardless of manufacturer, size and material, must have the same drilling and bolt pattern parameters: the diameter of the central hole is 58 mm, and the length and number of studs, traditional for all VAZ models, is 4x98.
• R14 is the most popular option, since it is the one that is installed at the factory, and when changing disks you can always contact an official dealer without resorting to any expensive products in markets and car shops. The main dimension of these wheels is 5.5J x 14H2 ET35, and the special design of the wheel arches with a rim offset of 35 allows you to install several tire sizes at once - 175/70R13, 175/65R14, 185/60R14, 185/65R14 and 185/55R15, as in both winter and summer versions.
• Wheels on the Priora R15 are a less popular option; they can be either stamped, cast or forged; they are used to replace wheels yourself, at the driver’s request. The main geometric parameters of such wheels are 6.0J x 15H2 ET35, and from this it can be seen that the rim offset relative to the center of the mount is the same value as the previous version, which means that the tires should be installed with a smaller profile, which is better adapted to sports driving on good roads. The main recommended tire size is 195/55/R15.
• R16 - wheels installed specifically for sporty driving around the city in the summer, can be either “stamped” or “forged”, have a complex design and correspond to the status of the car owner. For the Priora, 2 main sizes are suitable at once - 6.0J x 16H2 ET35 and 6.5J x 16H2 ET35. In this case, rubber can also have 2 main parameters - 195/50/R16 and 205/45/R17, and the latter option obliges the car owner to install additional plastic mud flaps around the perimeter of the wheel arch, and otherwise a wide wheel will definitely quickly pollute the body of the Priora. .
• For the most sophisticated drivers, wheels with parameters of 6.5J x 17H2 ET35 are offered, which can be equipped with 205/40/R17 tires, and they are much more expensive than the previous ones, and are also often available in a forged version. However, with such low-profile tires, the driver can safely drive on asphalt at maximum speeds and not be afraid of sharp turns.

What to replace with

If you're tired of your factory wheels, it's time to get something new. Lada Priora does not differ in design features, so the list will contain the most suitable products for updating the external style of the car.

Alloy wheels are affordable for many people, so it’s worth starting with them. Let's look at the companies and their main developments:

1. Skad is one of the most popular manufacturers of alloy wheels. Among the many models, pay your attention to the following: R14 Uran-2, R15 Magnum, R14 Fortuna, R14 Callisto, R15 Alligator, R15 Sting. Among the options there are classics and several original wheels that will help update the style of the car. Almost all models are reliable and have good impact resistance.
2. K&K - has more interesting models: R15 Torus, R15 Iguana, R15 Spark. High impact resistance and style - this is a brief description of products from K&K.
3. Alcasta - R14, R15 M32, R14, R16 M29 - simple inexpensive options.
4. If you want to install an R16, feel free to buy a Camrica, you won’t regret it.

While all of these models are recommended, you may want to choose something that suits your style better.

The ideal solution for many situations is to use 2 different sets of disks. For the Priora, the best choice for the summer is considered to be four stamped alloy wheels, and for winter it is worth choosing durable cast products. If you change them depending on the season, they will last much longer, so you won’t have to think about replacing them for a long time.

Casting for Priora, parameters, article number, price, list of manufacturers

Probably everyone has seen cars from the AvtoVAZ plant for stamping and casting, but even some Priora owners do not know what article number such wheel elements have - stamping, which manufacturers make alloy wheels for Lada Priora 14 and 15, which wheels are better to choose and much more. This article will answer all questions.

Factory wheels for Priora - parameters, article number, price

Wheels on the Lada Priora are installed as standard from the factory, their sizes and parameters are as follows:

• Diameter 14 inches.
• Drilling LZ×PCD 4×98 mm.
• Width 5.5J.
• Reach ET 35 mm.
• Center hole diameter DIA 58.6 mm.

There are no alloy wheels for the Lada Priora of any other size, also in the range of the Lada Sport brand. Depending on the configuration, Lada Priora was equipped with stamped steel or light alloy cast wheel elements.

Stampings

Stampings on Priora R14 are designated by catalog number 21700-3101015. Original steel stamped parts are produced by Mefro and TZSK LLC. The part is painted in one of the following colors:

• Black.
• Grey.
• Silver.

Lada Priora with r14 stampings are often found, since steel wheels were installed on most inexpensive trim levels, also due to the low price of stampings. Wheels on Priora - R14 stamping cost 800-900 rubles.

Cast



Lada Priora with alloy wheels were produced from the factory. Standard casting was installed in the “Lux” configurations. The article number of the original part for Priora is 21720-3101015. The behavior of the car on the road depends on the size of the tires and wheels - r14, r15 are installed by the manufacturer on Priora. Elements were delivered to the conveyor. The price of a new original cast Lada Priora is 3000–3500 rubles.

Advantages and Disadvantages: Dies and Casting

Basically, cars are operated with two sets of tires: winter and summer. Therefore, in order not to waste time and money on seasonal tire fitting, purchase a second set of wheels. The wheels on the Lada Priora are either stamped steel or light alloy cast, and the car owners decide what type of elements to buy.

Differences in steel stampings:

1. Low price.
2. Maintainability.

The main disadvantage of stampings is their high specific gravity. The disadvantages also include low resistance to deformation and the fact that they are monotonous in appearance and not interesting.

But a bent steel stamping can be easily straightened even by hand, and when deformed, the wheel absorbs impact energy, protecting the suspension from damage. Therefore, this can be a plus to some extent.

The design can be improved by installing wheel covers, but some people like the look of a car with stamps.

Casting looks more beautiful, weighs lighter, since light alloys are used in its manufacture, and almost any design can be cast. Improving the design of the car and reducing sprung masses are the advantages of installing casting. The main disadvantage is the high price. Casting is three or more times more expensive than dies of the same size.

The strength of alloy wheels is higher than that of stamps, but this advantage has a downside. Yes, the casting can withstand light impacts, but after a serious impact, for example, falling into a hole at high speed, the casting can no longer be restored. The coating of most models is afraid of the aggressive action of anti-icing agents; this is the “scourge” of winter roads in large cities.

Therefore, stamps are better for winter - even if the steel rusts (which should not happen with high-quality painting), the wheels are easy to tint and inexpensive to replace. The almost continuous design of the stamping sidewall better protects brake system parts from snow and mud.

List of wheel manufacturers for Priora and their price

Stampings and castings with a diameter of 14 inches are produced by many domestic and foreign companies. Among the stamp manufacturers, the following stand out:

• KFZ is an Austrian company that supplies wheels to many auto manufacturers. Model 5935 is suitable for Priora. Cost – 1300-1800 rubles.
• Mefro is a German company that produces high-quality, affordable parts. This company produces original spare parts for Lada, article number 21700-3101015, price 900–1100 rubles.
• Magnetto - produced in the Leningrad region, the brand belongs to the Italian group of companies CLN SpA Code for Priora - 14003, costs around 900 rubles.
• TZSK - Tolyatti Steel Wheel Plant - the official supplier of AvtoVAZ. Cost – 850-950 rubles.
• Eurodisk is a brand of the Fergana Mechanical Plant, production is carried out in Uzbekistan and the Leningrad region. The standard Priora model 53B35B costs about 900 rubles.
• Trebl is a Chinese brand. The brand's assortment includes a wheel with article number 53B35B for the Lada Priora, their price is approximately 950 rubles. Casting is represented by a greater variety than stamping. Unfortunately, many low-quality Chinese-made models are sold that are not durable enough. The production of cast elements is a technologically complex process, so choose casting from reliable companies.

Good light alloy wheels are produced by Russian manufacturers. K&K is a supplier of Lada conveyors. Products from the Krasnoyarsk plant are durable and of high quality.

The KiK line is offered as original Lada Priora accessories:

1. Torus.
2. Status.
3. Magma.
4. Combi.
5. Sonar.
6. Attica.
7. Sunway.
8. Orbis.

Many other K&K elements correspond to the Prior size:

• Accent.
• Iguana.
• Kalina-sport.
• Omaha.
• Rome.
• Siesta.
• Blade.
• Moulin rouge.

And this is not a complete list - there is a large selection. The cost of domestic casting is 2200–4000 rubles.

Another popular domestic manufacturer of light alloy wheels is SKAD.

The plant for their production, located in Divnogorsk, has been operating since 2002, supplying wheels to many foreign automakers, including Ford, Volkswagen.

SCAD is produced using modern technologies and meets international standards. The company's product range includes wheels for domestic cars.

The most popular models suitable for Priora are:

1. Uranus2.
2. Magnum.
3. Callisto.
4. Sting.
5. Veritas.

SKAD offers its products at the same price as KiK.

Tech Line is a product of the Azov Tek plant located in the Rostov region. 16 wheels of the brand’s model range with different designs have standard Prior sizes, for example:

1. Multi-spoke: TL 437, TL 426, TL 406.
2. Six-beam: TL 1401, TL 414.
3. Star-shaped: TL 430, TL 429.
4. With an unusual design: TL 418, TL 420, TL 438, TL 1406.

What does the size of tires and wheels affect?

Increasing disc diameter

Have you decided to choose winter tires for your Lada Priora? For winter it is recommended to choose narrow tires. The fact is that with such tires the pressure on the road surface will be greater, and therefore the grip on the road will improve. Wide tires are more sensitive to ruts in winter. Low-profile tires perfectly transfer even the smallest pits to the fifth point.

The smaller the unsprung masses

(this includes a lot of tires and wheels), the better the car will hold the road and accelerate faster. For example, if you put wheels on a car that are 2 kg lighter each, then acceleration to 100 km/h will be reduced by 0.2 seconds.

In conclusion, we present statistics that were compiled based on a survey that took place among Lada Priora owners. Results of the survey “What size are the rims on your Lada Priora?” the following:

1. 35% voted for R15 wheels.
2. R14 wheels received 26% of the votes.
3. For R16 wheels - 22%
4. 12% of owners drive on low-profile R17 tires.
5. Exclusive R18 wheels were installed on 4% of survey participants.
6. The rarest R13 wheels are owned by 1% of owners.

Let us remind you that for safety and to increase the service life of your tires, you should maintain the recommended pressure in the Lada Priora tires. Read other articles on tuning Lada Priora, easy search by content.

Wheels with original design

The desire of car enthusiasts to make their Priora extraordinary, recognizable and stand out in the crowd has influenced the spare parts market. There are a huge variety of wheels on the shelves of specialized stores. The original design is reflected in the shape, size and number of spokes.

Among the large number of models there are successful designs; installing them means not only changing the appearance of the car, but also improving its dynamic qualities. They can be painted to match the color of the car or have a chrome coating, which provides high anti-corrosion properties and the aesthetic appeal of the car.