1. Remove the door trim. How to remove the door trim on a VAZ 2114, 2115? 2. We attach the podium to the door trim. (Fig. 1) 3. From the inside, through the door trim, we screw the podium with two galvanized self-tapping screws 4.2×16. (Fig. 2) 4. We cut through the door trim for the speaker (for VAZ 2114, 2115 podiums, we cut through the door trim to connect the wires to the window lift button). (Fig. 3) 5. We secure the podium around the entire perimeter with 4.2×16 self-tapping screws. (Fig. 4) 6. We check the “hedgehogs” of the casing fastenings - we replace the bad ones. 7. For VAZ 2114, 2115 podiums we install and connect power window buttons. We carefully cut through the skin, leaving allowances along the edges! (Fig. 5) 8. Reinstall the trim on the door. (Fig. 6) 9. Through the petals in the podium (in the hole for the speaker) we screw two 3.5×41 screws through the casing into the iron. This allows the podium and trim to be firmly secured to the door. (Fig. 7) 10. From below, under the podium pocket, trying to ensure that the heads of the screws are not visible and do not touch the podium, we screw the trim to the door - into the iron with two 3.5x25 self-tapping screws. (Fig. 8) 11. Connect the speaker. (Fig. 9) 12. We install the speaker and its grid.
Everyone knows that Russian cars are a rattle, and a dozen are no exception. Some try to somehow deal with the creaking and rattling in the cabin, and some turn up the music louder and do not pay attention to all this. If you belong to the first category of people, then this article may be useful to you.
A constant source of irritation in the VAZ 2110 interior is the door cards. Cheap plastic together with unsuccessful fastenings in the form of pistons make our ride more varied and interesting
