What is the diameter of the steering wheel on a VAZ 2114 - how to choose the right braid

All steering wheel braids are divided by size by manufacturers. This is one of the main characteristics, along with the material from which it is made, as well as the method of attachment directly to the steering wheel.

Handlebar braid size 2110 (handlebar size)

Cars VAZ 2110, VAZ 2111 and VAZ 2112 - the steering wheel size is 38 cm, accordingly you need to purchase a braid of size M (37-38 cm)

steering wheel braid size 2110

Niva steering wheel braid size (steering wheel size)

The Niva's steering wheel is slightly different in size from other cars produced by VAZ. The diameter of the handlebar is 40 cm, which corresponds to size L.

Niva steering wheel braid size

Gazelle steering wheel braid size (handlebar size)

The most popular domestic business vehicle has an even larger steering wheel than passenger cars. And accordingly, a braid size XL is suitable for them

GAZelle steering wheel braid

Logan steering wheel braid size (steering wheel size)

One of the most popular foreign cars has a steering wheel size of 38 cm, and accordingly the appropriate size for it is M.

Logan steering wheel braid size

Braid on grant size (handlebar size)

Like most passenger cars, the VAZ 2190 Granta and modifications are equipped with a steering wheel whose diameter is 38 cm. Accordingly, the size of the suitable braid is M.

Grant braid size

Steering wheel braid sizes Priora (steering wheel size)

Priora, like almost all passenger cars, is equipped with steering wheels with a diameter of 38 cm. By purchasing size M, the car enthusiast makes the right choice.

steering wheel braid priors dimensions

Solaris steering wheel braid size (steering wheel size)

Most foreign passenger cars have a steering wheel with a diameter of 38 centimeters, which corresponds to size M.

Braid on Solaris size

Dimensions of steering wheel braids

All steering wheel braids are divided by size by manufacturers. This is one of the main characteristics, along with the material from which it is made, as well as the method of attachment directly to the steering wheel.

Handlebar braid size 2110 (handlebar size)

Cars VAZ 2110, VAZ 2111 and VAZ 2112 - the steering wheel size is 38 cm, accordingly you need to purchase a braid of size M (37-38 cm)

steering wheel braid size 2110

Niva steering wheel braid size (steering wheel size)

The Niva's steering wheel is slightly different in size from other cars produced by VAZ. The diameter of the handlebar is 40 cm, which corresponds to size L.

Niva steering wheel braid size

Gazelle steering wheel braid size (handlebar size)

The most popular domestic business vehicle has an even larger steering wheel than passenger cars. And accordingly, a braid size XL is suitable for them

GAZelle steering wheel braid

Logan steering wheel braid size (steering wheel size)

One of the most popular foreign cars has a steering wheel size of 38 cm, and accordingly the appropriate size for it is M.

Logan steering wheel braid size

Braid on grant size (handlebar size)

Like most passenger cars, the VAZ 2190 Granta and modifications are equipped with a steering wheel whose diameter is 38 cm. Accordingly, the size of the suitable braid is M.

Grant braid size

Steering wheel braid sizes Priora (steering wheel size)

Priora, like almost all passenger cars, is equipped with steering wheels with a diameter of 38 cm. By purchasing size M, the car enthusiast makes the right choice.

steering wheel braid priors dimensions

Solaris steering wheel braid size (steering wheel size)

Most foreign passenger cars have a steering wheel with a diameter of 38 centimeters, which corresponds to size M.

Braid on Solaris size

Size chart for steering wheel braids

Why do you need a steering wheel braid?

Steering wheel braid is one of the most popular and very common accessories for a car. There are many reasons for using this accessory:

1. Preserving the appearance of the car interior, because the steering wheel is one of the most noticeable elements in the car interior.
2. The desire to bring aesthetics and update the appearance of the “blurry-eyed” salon. This is especially true in cars where manufacturers have skimped on refinements in interior design.
3. The desire to make driving more comfortable. In the warm season, even palms covered with sweat will not slip on it, which allows you to strengthen your grip and feel more confident on the road. In addition, the increased diameter due to the braid or cover also has an unobvious practical significance: a steering wheel with a small diameter that is too thin, especially when cornering, can slip in your hands. The thick steering wheel, on the contrary, has a hard and dense surface that is more pleasant to hold in your hands.
4. Practical use. The steering wheel braid plays the role of a kind of cover. Which protects the steering wheel from the effects of sunlight, excessively dry air and temperature changes. In used cars, it also hides defects in the steering wheel that have appeared over time.

The old steering wheel has been removed and we are moving on to installing a new steering wheel.

We set the steering column switch to the neutral position, while the spokes should be in a horizontal position.

Turn the turn signal switch ring. the pin should fit into the groove of the ring.

After this, tighten the nut and connect the electronics. Reconnect the minus terminal to the battery.

And lastly, check if the horn and steering column switch are working.

The work of replacing the VAZ 2114 steering wheel can be considered completed. It is better to start testing a new steering wheel on a test drive, since you will still need to get used to it a little, because it is still different in size from the previously installed one.

But remember that the steering wheel installed by the manufacturer is considered the most reliable, because it was designed specifically for the VAZ 2114 and has passed test drives and fully meets all standards than a steering wheel produced by another company.

The installation of a new steering wheel should be approached very responsibly, because the steering wheel is one of the most important mechanisms of the car and is responsible for your safety.

The following video demonstrates the Lada Samara with ESD.

Professional car care includes polishing the body, glass, headlights, and deep cleaning of the interior. To refresh the color of the car, eliminate cloudiness, small cobwebs, you can polish the body. It is suitable for pre-sale preparation of vehicles. The car is polished.

The car is, of course, a very fragile thing, even though it consists of metal. For example, the paintwork, which in many ways makes the basis for the attractive appearance of the car, is always subject to deformation, since both stones and sand that grind the paint hit the body while driving. Of course.

Euro handles are used to improve the appearance of the car and for its comfort. For example, if you have already installed tuning elements on your car, then with ordinary standard handles the overall appearance of your VAZ 2109 car will look unfinished. This kind of tuning may be relevant, etc.

• Electrical equipment
• Engine
• Brake system
• Other
• Steering
• Transmission
• Suspension
• Tuning

• VAZ 2110 Other
• Engine
• Steering
• Electrical equipment
• Transmission
• Brake system
• Suspension
• Tuning

• Video publications
• VAZ tuning photo stream
• Operation and repair manuals

Which steering wheel braid should I choose?

Material of execution - The modern market is saturated with a huge number of different braids for the steering wheel, differing in materials of execution. Most often the material used is natural or ECO (leather substitute) leather, velor, rubber and foam rubber. Each user will be able to choose a model to their taste. For a young girl, a brightly colored foam or fur braid is suitable. Men will opt for timeless classics made of leather with a minimum of decorations and details.

Regarding quality, the undoubted leader among materials is leather (with proper care it can last the entire life of the car). then there are the braids of their ECO leather - exposure to sunlight and temperature changes are very destructive for them (service life is three to four years). The most fragile and short-lived are fabric braids with foam inserts; in addition to temperature conditions, the fabric is very sensitive to physical impact, like foam rubber in pads.

Types of braids on the steering wheel.

Covers do not require additional actions to fix on the steering wheel other than putting them on directly. Complete donning will not take more than 20 minutes, provided that the buyer-car owner has not made any mistake with the size.

The advantages of this type:

A wide selection of models of all shapes, models, colors and shades. Quick and easy installation. Even a complete beginner can figure it out.

Disadvantages of this type:

Aesthetically, although the steering wheel becomes more attractive, there is still some “unfinishedness”. Constant physical impact on the cover causes the braid to begin to stretch. Thus, over time, the braid will begin to not sit tightly on the steering wheel, which in turn will lead to slipping. And this causes very great inconvenience when driving.

put the cover on the steering wheel

Sheathing covers are a kind of “new skin”, in their subgroup they are divided into two types according to the type of direct fastening. Using a lace or a special thread. A more advanced variation of the braid is a kind of steering wheel wrap.

The advantages of this type:

Aesthetic - allows you to get an excellent result, a well-tightened steering wheel will be pleasing to the eye and fit perfectly into the interior. It fits tightly to the steering wheel, there is no risk of slipping. Durable.

The downside is that installation is difficult, you need to spend a lot of time and have some sewing skills. To obtain an ideal result, it may be necessary to remove the steering wheel.

How to choose a steering wheel braid?

Steering wheel braid is a fairly popular and widely purchased car accessory. There are many reasons why drivers decide to buy it: a thirst for aesthetics, comfort, a desire to update the appearance of a familiar steering wheel or to preserve the presentation of the car interior for as long as possible, since the steering wheel is perhaps the most noticeable element of the car interior.

However, there are a number of difficult aspects in choosing a braid for a steering wheel, such as the choice of size, braid material, its design, color and method of fixation. Some steering wheel covers are quite easy to put on (provided the size is correctly selected), while others require quite a long and painstaking work on braiding the steering wheel using special ropes or threads.

From this article you will learn how to choose the size of the steering wheel according to the make of the car, what material should be preferred and how to properly put on and cover the steering wheel.

Modernization of interior elements

If you do the VAZ 2114 tuning yourself, you can upgrade the interior lighting. You can choose a more modern device as a light source. Instead of the traditional one, you can install a lampshade that has a programmable LED lamp. This interior lighting has expanded functionality. For example, you can select one of three brightness modes, which will be possible by switching at intervals of 1 second, while the system will remember the last time it was turned on. You can set it to delay turning off after 6-8 seconds, followed by a smooth shutdown of the lamp. If the door is not closed or poorly closed, the lighting will turn off after half an hour.

First, the plastic diffuser of the “native” lampshade is dismantled. The wires are disconnected from the contacts, the fasteners that are responsible for fixing the device body are removed, this will allow the body to be dismantled. The LED component must be removed from the plastic cover. The electrical wiring must be connected to the plugs of the illuminator according to the diagram. The new body of the device must be fixed to the ceiling in the appropriate place, using the same screws. Now the diffuser can be mounted on the body.

Tuning a VAZ 2114 car often involves changing the seats or reupholstering them. The upholstery can be made of almost any material, but the leather interior of a VAZ will look much better than one made of material installed at the factory. To reupholster the chairs, you must first dismantle them. After this, you can remove the old covers and loosen the steel clamps on the back.

The covers must be cut into separate elements, which will allow the dimensions to be transferred to a new material, which can be used, for example, Alcantara or, as already noted, leather. If you decide to use Alcantara, then you need to take into account that it has a short pile, which is directed in one direction, which you will have to pay attention to at the time of cutting.

The waist can be reinforced with foam rubber sheets, for which you should use sheets that have a thickness of 5 mm. The elements of the covers should be glued onto foam rubber, the components sewn together and put on the seats. After tuning the VAZ 2114, photos of the interior can be posted on specialized websites and experience can be shared.

Do you need a steering wheel braid?

The first and most frequently asked question is: “Why do you need a braid on the steering wheel, if at all?”

It’s good for owners of expensive cars with leather interior trim, where everything is harmonious, the overall style is consistent, and the leather steering wheel, pleasant to the touch, goes well with the car’s interior. But what should owners of the budget segment do, where everything in the car’s interior is so minimalist that there’s nowhere for the eye to fall? A steering wheel braid is also needed if you buy a used car, if the steering wheel is well-worn, with numerous scratches and abrasions.

The steering wheel braid also serves as a kind of cover, and like covers on mobile phones, it allows you to preserve the presentation of the steering wheel in case of selling the car.

The braid on the steering wheel prevents your hand from slipping and turning the steering wheel, which makes driving safer. It increases the thickness of the steering wheel, making the steering wheel more comfortable for drivers with a wider hand.

Rating of the best eco-leather braids

The material, in its appearance and characteristics, is very reminiscent of genuine leather, although it is not. The cost is less than silicone analogues. A distinctive feature is an attractive design. Can be solid or interesting. It is extremely popular among both women and men.

Dermay

In this model, it is necessary to highlight the quality of the stitching, since this is the main drawback of a product made from eco-leather. The stronger the seam and threads, the longer the product will last and will not lose its original appearance. This accessory is stitched with nylon thread, which practically does not tear or fray. It is used both for sewing the outline and existing inserts.

You will have to pay 1005 rubles for the product.

Dermay braid Advantages:

• color contrast;
• thread strength;
• durability;
• ease of use;
• versatility.

Flaws:

none.

Dermay

The product is stylish, reliable and durable. Reasonable price for such characteristics. The stitching is high quality. The product consists of several parts. There are decorative elements that are beautifully framed with red thread, which makes the accessory even more attractive. The convex details of the braid gently massage the palms.

The average cost is 990 rubles.

Mc Driver braid Advantages:

• attractive appearance;
• pleasant tactility;
• seam strength;
• long service life;
• value for money.

Flaws:

not installed.

Mc Driver

The average cost is 1896 rubles.

Mc Driver braid Advantages:

• wear resistance;
• beautiful design solution;
• practicality;
• versatility;
• ease of use.

Flaws:

not installed.

Cobra

The product manufacturer is CarFashion. Production facilities are located in the Middle Kingdom. High-quality eco-leather is used in production. Color – black – brown. Available in two sizes: 37 and 39. Belongs to the universal category. Inserts reminiscent of reptile skin look stylish and rich. You can purchase it for your own needs or as a gift. The edges are well stitched. They will remain strong for a long time and will not fall apart or stretch.

Purchase price – 450 rubles.

Cobra braid Advantages: Disadvantages:

not identified.

Derbi-XL

The product attracts attention with its beautiful gray color. Made from high quality eco leather

Despite the Chinese origin of the product, there are no complaints about the quality. Suitable for any salon interior. Belongs to the category of universal. The edges are stitched with strong thread. Designed for large diameter steering rims (41 – 43 cm).

The sellers are asking 450 rubles for the products.

braid Derbi-XL Advantages:

• quality of materials used;
• seam strength;
• thread reliability;
• long service life;
• ease of care;
• value for money.

Flaws:

none.

Rubin

Product from a Chinese manufacturer. The surface is perforated. The product itself is black. Designed for steering rims with a diameter of 37 – 39 cm. The wavy structure has a pleasant effect on the palms. Even when driving for a long time, your hands do not get tired. The pad will last a long time if you take care of it promptly.

The average cost is 580 rubles.

Rubin braid Advantages:

• unique design solution;
• ease of use;
• practicality;
• ease of maintenance;
• durability;
• reliability;
• landing strength.

Flaws:

not installed.

DKDFCD

If you decide to purchase an overlay up to 5,000 rubles, then you should pay attention to this model. Beautiful, stylish, high-quality product with suede inserts

The material is pleasant to the touch. The seams are made with high quality using durable thread that is almost impossible to tear. To put it on the steering wheel, you need to spend energy and free time. In addition, firmware is required. For these purposes, the manufacturer provides preformation along the entire length of the circumference, which significantly simplifies the process. There is no need to poke holes with a needle. The trim completely covers the steering rim, leaving no free space.

braid DKDFCD Advantages:

• attractive appearance;
• high quality sewing;
• durability;
• reliability;
• ease of use;
• ease of care.

Flaws:

not identified.

Which steering wheel braid should I choose?

But let's start choosing the braid for the steering wheel. We will select it according to parameters.

Material. Today on the market you can find steering wheel braids made of various materials. Most often, girls buy “fun” soft steering wheel covers made of velor, fabric, suede, plush, foam rubber, while men prefer classic options made of genuine leather or leatherette. The most durable and advantageous option is the one made of genuine leather, but such popular cases made of foam rubber very quickly become crushed and lose their shape.

Color and design. You should not buy a steering wheel cover that does not match the color scheme of your car's interior. So, if your interior is black, it is better to take the same dark steering wheel cover and leave beige models to the corresponding cars. Of course, everyone chooses a cover in accordance with their taste preferences, but sometimes this choice looks simply monstrous, especially if a colorful velor cover with butterflies is placed in an incredibly stylish and beautiful car.

Fixation method. There are two main types of steering wheel braids: covers that do not require covering, and the steering wheel braids themselves, which are fixed to it using special threads. Each variety has its own pros and cons. Fixed covers are quite easy to put on, however, during use, such covers can twist and slide if the cover does not fit tightly enough. The steering wheel braids can be completely integrated into the interior, so that an uninformed person will not even know that it is not native to this car, however, there are difficulties in covering the steering wheel with such a braid. You need to have a certain skill, free time and patience to cover the steering wheel yourself. You will learn how this is done further down in this article.

Installation Rules

Installing the steering wheel is a dismantling process in reverse order. If you can handle the removal, then you will be able to install it.

1. Installation begins by transferring the mark from the old steering wheel to the new one. Be extremely precise: the correctness of further control of the machine depends on this. The mark on the new part should be exactly in the same place as on the previous one.
2. Put the steering wheel back in place. Make sure that the mark on it and on the front panel match the same as in the case of the old part.
3. Replace the central nut and tighten it. If it does not fit tightly in the socket head, insert the wire strands between them. When the nut is in place, remove the wires and secure the nut tightly.
4. Replace the steering wheel cover and tighten all screws.
5. Make sure the steering wheel is straight. If even a slight displacement is observed, the part will have to be reinstalled.
6. Replace the battery terminals and test your new steering wheel by driving it away from major roads. At first, its diameter may be unusual, but the ease of driving should remain the same.

if the nut falls out of the socket, use the wire strands

The most difficult thing in the process of replacing the steering wheel on a VAZ 2114 and 2115 is choosing the right parts

Pay attention to the markings on the steering wheel, covers and, if necessary, adapters. In some cases, it may be necessary to replace the steering column switches

But dismantling and installing a new steering wheel itself will not cause you any particular difficulties if you strictly follow all the instructions.

Steering wheel braid - dimensions

Deciding on the size of the steering wheel cover is quite simple if you are purchasing it for yourself and not taking it as a gift. To do this, you just need to measure the diameter of your steering wheel and select the size of the cover according to it.

How to choose the steering wheel braid size?

But what if you are purchasing the case as a gift? Today on sale you can find covers of various sizes: S (35-37 cm), M (37-38 cm), L (39-40 cm), XL (42-43 cm), XXL (47 cm), XXXL (49 cm).

Size S (35-37 cm). This size is perfect for small cars: Oka, Tavria or for cars with a sports steering wheel. This size will also fit the Kia Picanto; it has a steering wheel diameter of 37 centimeters (the cover will fit with difficulty, but will fit clearly).

Size M (37-38 cm) . The most common size that fits most foreign-made passenger cars. Size M can be confidently called standard, it is suitable for cars: Kia (Rio, Venga, Ceed, Soul, Sorento, Optima, Sportage, etc.), Nissan (Murano, Almera, Terrano, Sentra, Juke, Teana, etc.), Ford (Focus, Mondeo, Kuga, Ranger, etc.), Toyota (Corolla, Auris), Volvo (V40, S60, S80, etc.), Chevrolet (Cruze, Aveo, Spark, etc.), VAZ (2108-2109, 21010 - 2115, Granta, Kalina, Priora), and many, many other foreign cars. In general, you understand, if you have a foreign passenger car or a domestic car from the list above, then you can take size M with 95% confidence.

Size L (39-40 cm). NIVA, VOLGA, MOSKVICH, VAZ-2101, 2107, 21011, 21013.

Size XL (42-43 cm). UAZ, GAZelle, etc.

Size XXL(47 cm). Imported trucks.

Size XXXL(49 cm). KAMAZ.

Do I need to modify anything during installation?

In any case, no matter which option you choose, you will also have to configure the transmission speed sensor. If this is not done, then when starting from a stop and at low speeds you will not notice any changes. That is, it will still be difficult to turn the steering wheel. And only when you pick up high speed, the steering wheel will give in to you with less resistance.

And if there is no speed sensor, then it must be installed. Here's what it should be: 6-pulse pass-through from 214 Niva (usually included with the factory electric amplifier)

In addition, some other changes will need to be made to the design. Here they are:

• take another choke cable (included with the electric booster from the VAZ 2108) and move it;
• replace the gearbox - take one so that it has a short worm shaft, but the bipod remains original;
• if the VAZ 2107 has a contact ignition system, then you need to install a MUR1100E diode.

How to trim a steering wheel correctly?

It's time to move directly to covering our steering wheel with the purchased braid, or to putting on a cover. As mentioned above, this activity is not as simple as it might seem at first glance. To simplify the whole process, I have prepared special photo instructions.

How to put the cover on the steering wheel?

The cover is pulled over the steering wheel from top to bottom. It is better when two people participate in this process: one fixes the cover at one point, preventing it from slipping and warping, and the second carefully tightens it. Sometimes the cover is put on quite tightly, and it is impossible to do without male strength.

How to cover a steering wheel with braid?

The process of tightening the cover may seem like a small thing to you compared to the complexity of covering the steering wheel with a thread and a needle. There are many methods, each of which depends on the individual characteristics of a particular braid model. I will suggest one method.

First, we put our cover on the steering wheel. In the case itself, holes for threads are already made in advance, because... the leather is quite thick, and it will be very difficult to pierce it on the steering wheel (all the work will “go away” and don’t expect a good effect.). In one place our thread with a knot is pierced, and the process of covering the steering wheel has begun.

This cladding method is the simplest, fastest and does not require special skills.

However, this cross method looks much more attractive. This stitch completely replicates the cross stitch method.

There is also this method.

This article was about how to choose a steering wheel braid. Ride in comfort!

Tuning the interior trim

Vinyl leatherette is most often used as an alternative upholstery material. It is better to choose the main color in advance. We advise you to buy coverage with a reserve.

Before starting work, you also need to prepare a set of necessary tools and materials:

• vinyl artificial leather (you can choose any other suitable one);
• knife or cutter;
• strong threads;
• a simple sewing kit (ideally, work on a sewing machine);
• scissors;
• pencil;
• construction stapler;
• good glue.

The easiest item to replace is the sun visor, so that's a good place to start. The part is removed from the fastenings and the standard upholstery is removed by separating it along the seam. A piece of new material will be cut along the top and bottom. When cutting, you need to step back from the outlined boundaries by one centimeter; this margin will be used for seam allowances. You also need to leave some more space - approximately 0.3-0.4 cm from the same contour line - in order to pull the cover over the visor.

Using a sewing machine, the two parts are sewn together. This can be done without a machine, but in this case the operating time will increase significantly. The seam should be on the wrong side. Leave part of the contour line unsewn, since the product must be turned out through this hole and pulled onto the visor, after which the free space is sewn on the outside. The visors are installed in place, now you can move on to other elements of the interior.

Replacing door trim

Door cards can also be transformed by replacing them with an alternative material. This is no more difficult to do than the previous procedure with visors. The scheme is similar. The door cards are removed, and the standard upholstery is removed using a utility knife. This contour is applied and outlined on the wrong side of the vinyl leather, after which the pattern is cut out with the same margin of one centimeter along the edge.

A staple gun should be used to attach to door cards. However, standard staples will not work, since the card is too thin and they will pierce right through it. For work, it is better to choose staples with number 8. Vinyl leatherette is attached to the back of the doors with a stapler. If the staples do come out, they can be removed by cutting them off with ordinary office scissors. Next, all that remains is to install the door card in place. On the other doors everything is done in the same way.

Replacing the roof sheathing

The procedure is largely similar in processing all other elements. The only inconvenience is the labor-intensive nature of such work, which takes a lot of time and effort. But you can always do not everything at once, but gradually.

The process goes like this. The roof is measured and, based on the results obtained, a contour is drawn on a piece of vinyl leatherette. After this, the material is glued to the roof (a stapler will not work, the upholstery is practically in contact with the metal). It is possible to first remove the old upholstery, or you can stick the new one directly on it. It is recommended to use the second option: dismantling the ceiling cladding will significantly complicate the replacement process, and it will not bring practical benefit.

For a more attractive appearance of the interior, you can replace the lighting with LED. It is worth changing the lampshade itself along with this. You can tune the interior trim yourself using inexpensive materials and the simplest tools. Creating a leather interior is done in a similar way, only you need to use leather glue.

Complete interior tuning

It's easy to replace the trim inside the car, but what about the seats? After all, they will remain with regular fabric upholstery, and this combination will not look very attractive. It is unrealistic to reupholster the chairs yourself, so you can use the economy option and buy covers made of the same or similar material. More advanced owners of the VAZ 2114 solve the issue radically and change the seats completely, often choosing sports seats of the “bucket” type.

To replace the casing, you can contact a service center and actually perform this procedure yourself. To do this, you only need a set of wrenches. There will be no difficulties with dismantling. The audio system cannot be called a tuning element, but installing a modern car radio with a touch screen will significantly decorate the center console of the VAZ 2114. You can complement the interior tuning with alternative dashboard lighting, a leather steering wheel cover (preferably in the same color as the overall upholstery).

Steering wheel diameter VAZ 2114

Release date: 03/07/2022

Review from a car owner named Faisal: Appearance for the city + highway 160-170 without problems, handling 5+, although I installed spacers

Category: Auto repair

Vehicle characteristics: The vehicle dimensions are as follows: body length - 3657, width - 1100, height - 1420 mm. The wheelbase is 2556 mm. Ground clearance 161 mm. The car is equipped with a hybrid power unit. The 2-cylinder engine is equipped with a system that provides engine power output. There are 4 valves per cylinder. The diameter of one cylinder is 71 mm, the piston stroke is 77 mm. The engine crankshaft accelerates to 6000 rpm. Maximum torque is maintained up to 5000 rpm.

Posted by admin: at the request of Azamat

Original name: . . ". -2114

Quality: HD 1080

Laughter in the topic: Two ants are running and singing: “They won’t catch us.” One was stepped on, the other: “why trample on my love”

If you have a question about braids, this reference information will help you find the answer:

Will SAM-201 fit the factory VAZ 2114 steering wheel?

If the steering wheel is standard (37-38 cm), then it will do. If, for example, the steering wheel was changed to 39-40 cm, then size L is needed.

On the front side of the packaging of the SAM-300 braid it is written that it is composite leather, and on the back that it is artificial leather. It turns out that you are deceiving people when you write that the braid is made of composite leather?

There is no deception here. Composite leather does not mean genuine leather. The materials use two types of eco-leather: smooth and textured. Braids SAM-201 and SAM-200 are made from genuine leather:

Tell me, what is the width of the Sam-200 braid?

Approximately 10.3 cm.

I want a SAM-201 braid for Renault Logan 2012. Which of the listed sizes will fit me on the steering wheel? Can you advise what would be better for a leather or eco-leather steering wheel? Will delivery to Sevastopol be possible?

Delivery to Sevastopol is possible. Leather or eco-leather are personal preferences) Both materials are good, eco-leather is stronger, leather has more status. You can determine the size by the diameter of the steering wheel. Braid size M – 38-39 cm.

How is braided without lacing attached?

The braid is simply put on the steering wheel like a cover.

• Tire sizes from to , width from to and profile from to .
• Minimum tire size: 175/70R13, maximum:

Payment for goods in the AUTOBOX online store

The order is sent in any way convenient for you:

by Russian Post or EMS; transport company;

By courier in Novosibirsk; Pickup from the order receiving point;

Calculate the cost of delivery through the transport company PEK

If the product does not match the description, you can return the product,

paying the cost of return shipping.

Full refund if you do not receive the item

Refund if the description does not match

Product search

Our online store “AVTOBOX.INFO”

AVTOBOX LLC has been engaged in automotive accessories since 2009.

everything you need for your iron friend with us, in our auto shop.

We guarantee the high quality of all products presented and fulfillment of warranty obligations.

We are ready to advise you on any accessory, tell you about its properties and correct use.

Call, write, we will definitely answer, advise, advise.

The advantages of cooperation with our company are that:

• We have extensive experience in this field of activity.
• We can offer you a huge selection of car products and car accessories.
• Our products are distinguished by their quality; we work directly with major suppliers and manufacturers.
• There are no problems for us with exchanging goods.
• We ship orders anywhere in our country. Delivery method of your choice.
• We can offer the services of Russian Post, EMS services, TK Energia, TK Autorading, TK PEK, TK ZhelDorExpedition.
• Payment can be made in cash or by bank transfer.
• Our website describes in detail the methods of transferring from a SberBank and Alfa Bank card.
• We have reasonable prices.
• You can also ask our managers about the conditions for providing discounts or partial payments. Write to us any time. Call us by phone from 5-00 to 18-00 (Moscow time); Order pick-up point at Novosibirsk, st. Stationnaya 30a ka, office 202 Place orders in the AUTOBOX online store Honesty, quality, commitment are the main criteria of our work with clients.

How to choose a braid for the steering wheel: a guide to action

The comfort and safety of driving largely depends on the comfort of the steering wheel. Automakers in the design and manufacture of steering wheels for their cars are guided by simple rules: the steering wheel must be as unified as possible for the average driver and comply with all established standards. But each driver evaluates the comfort of the steering wheel according to his own criteria. Therefore, today steering wheel braids are in great demand, which help to personalize the steering wheel to the needs of each individual driver. We will tell you how to choose a steering wheel braid in this article and will try to briefly and without imposing a personal opinion talk about the main criteria by which you should approach the choice of a braid.

Content:

Varieties of materials for steering wheel braids

Today, the Russian markets offer a huge number of steering wheel braids of the most varied designs and quality. There are even handmade braids, so to speak, designer options that do not fall under the general classification. One of the main points in the question of how to choose a braid for the steering wheel is the selection of a suitable material from which the braid is made. Let's look at the most common materials:

1. Leather. It is considered the most expensive and durable material. Indeed, leather braiding will last a relatively long time without losing its qualities. However, this material also has disadvantages: the skin becomes quite cold in winter. Therefore, it is unlikely that you will be able to drive a car comfortably without preheating the interior or using gloves.
2. Leatherette, leatherette or other inexpensive material. Here, a lot depends on the quality of the braid, the reliability of the firmware and gluing, as well as additional reinforcing and decorative inserts. Often leatherette braids last no more than two years of active use of the car. After this period, their appearance and structure are irretrievably lost.
3. Fabric or plush. This material plays more of a decorative role than a practical one. The main advantage is a comfortable ride in cold weather. Fabric-based materials keep your hands warm in winter. The main disadvantage is rapid contamination and loss of attractive appearance. Not suitable for aggressive or sporty riding.
4. Rubber material with foam or leather inserts. An interesting layout that many drivers love. It is distinguished by the pliability of foam rubber, which takes the shape of hands, and elasticity. This is noted by many drivers as a very convenient feature.

Each of these materials is created for its target audience and has its own advantages and disadvantages. It is impossible to say unequivocally that one material is better and the other is worse. It all depends on the properties and durability required by the end user.

Materials

Purpose and installation of electric power steering on a VAZ 2107

The foam covers are soft and comfortable to hold. At the same time, they are short-lived, which is why they require frequent replacement.

Webbed braid models massage the palms well. During a long journey, this relaxing property will come in handy. But they do not allow moisture to pass through, so your hands may sweat. And with active driving, calluses often appear on the palms.

Comfortable braids with a gel base are pleasant to hold, but stiffen and become stale in cold weather.

The best braid option for the steering wheel is leather. They are more expensive, but the high price in this case is justified.

How to choose a steering wheel braid: main models

There are two fundamentally different types of braids: in the form of a cover or a laced braid.

A cover is the simplest and most common option. Sold immediately in the form of a steering wheel with a cardboard insert that supports the geometry. This is very convenient if the size of the steering wheel is unknown: you can simply attach the braid in the package to the steering wheel and make sure whether it fits or not. This model is put on the steering wheel by applying light force in a few seconds; this is considered a major advantage. Important: the braid in the form of a cover must be selected strictly according to the size of the steering wheel. If the braid size is larger than necessary, it may slip during rotation, which is dangerous. A braid with a smaller diameter can be damaged when applied to the handlebars. And in some cases it is not possible to wear it at all.

Laced braid options have two subtypes. One is sewn up with a needle and thread, the second is attached to the steering wheel with a cord. The main drawback is the rather lengthy process of installing the braid on the steering wheel. It also takes some skill and dexterity to lace the braid correctly and without damage. But the main advantage is a more aesthetic appearance and ease of use.

Dismantling process

There is electronics inside the steering wheel - the signal of a VAZ 2114 car, so first of all you need to disconnect the negative terminal of the battery. By turning the front wheelset to the “straight” position, you can begin dismantling:

1. The first step is to unscrew the seven screws on the covers located under the steering wheel. Once the fasteners are removed, the lower casing can be detached. The top section should only be removed when the steering column is pointing down;

After this, you need to remove the decorative trim. It has no fastenings, so it can be removed with a flat-head screwdriver. This must be done carefully, as the plastic here is fragile. Under the cover there will be two screws that hold the signal button - this also needs to be removed; Next, you should unscrew the steering wheel fastening nut so that it stays on the shaft, that is, you do not need to completely remove it;

Unscrew the 2 bolts located behind the removed cover and remove the cover and remove the plastic component

When the last fastening is removed, the steering wheel can be knocked down with a sharp blow and removed. In this case, a rubber hammer will help, as it will not damage the surface of the steering wheel.

Important! The steering wheel in the VAZ 2114 sits tightly on the spokes, so with a sharp jerk the parts may be damaged. When the hub is removed from the spokes, you can finish the fastening nut

Installing the steering wheel is done in the reverse order. An important point is the pointer switch ring. When installing, it must be rotated so that the pin can fit into the groove of the ring. If a non-standard product was purchased as a replacement, then the process is the same; the only differences can be in fastening and fixing.

Replacing the steering wheel of VAZ 2113, VAZ 2114, VAZ 2115

Welcome! Steering wheel - many people change it to replace it with a new one, more beautiful or more convenient, but sometimes there are also people who change the standard steering wheel to a sports version, it’s up to you to decide whether to do this or not, but in a good frontal collision there will be a greater chance of squeezing in a car that has a factory injury-safe steering wheel, not a sports jelly, in addition, the size of the steering wheel also plays a very important role, so when buying a new steering wheel at a car store, pay attention to the size (the larger it is, the easier it will be for you to turn the steering wheel but if it’s too big, it won’t be comfortable for you), and also look at its thickness (with a steering wheel that’s too thin, your hands can slip off during a sharp turn, and turning such a steering wheel will be less convenient).

Note! In order to change the steering wheel, you will need to stock up on: Screwdrivers, as well as an extension or a wrench, you will need to put on a socket head of size “24”, thanks to this head you will be able to unscrew the central nut securing the steering wheel to which without an extension and You can’t really get to the collar, so you obviously can’t do without them; in addition, take a hammer and a special drift made of soft metal for the same central steering wheel mounting nut!

Summary:

When should you change your steering wheel? At your discretion, but we will give you a couple of tips, if you decide to change the standard steering wheel to a sports one, we do not recommend that you do this, firstly, as was said earlier, sports steering wheels are stiffer compared to standard factory ones, and even technical inspection You may not even be able to get through with such a steering wheel, so think for yourself whether you need it or not, in fact, it is best to install a standard one, which was originally installed from the factory, but the latest cars of the Samara 2 family were equipped with injury-safe steering wheels from the VAZ 2110, think about installing them or change it to the native one from Samara 2.

Note! The steering wheel has a metal part of which it is attached to the shaft with a nut, this metal part can be deformed if you pull the steering wheel hard and try to somehow break it (Don’t think that it is impossible to break it on a car), then most likely this part will be deformed and after this it will become much more difficult and inconvenient for you to turn the steering wheel, in general, when you encounter this, you will immediately understand that in the video at the very end of the article, by the way, the metal part at the steering wheel is also broken!

We remove the old steering wheel.

What is the diameter of the center hole of a car wheel?

First, fix the steering wheel straight and align the front wheels, then remove the minus terminal from the battery.

We disconnect the car signal connector, and after that we unscrew all the screws of the steering column casings and remove the lower cover of the steering column trim.

After removing the lower steering column casing, you need to unlock and lower the steering column adjustment lever and then remove the upper steering column casing.

Using a screwdriver, remove the decorative trim on the signal, unscrew all the fastenings of the signal button and pull it out.

Using a socket wrench, unscrew the steering wheel mounting nut, but not completely.

If you do not have a puller, then you can use your hands to apply several blows towards you on the steering wheel, unscrew the nut and remove the car steering wheel.

Next, we change the steering wheel, removing the decor and the horn button, after securing the steering wheel, unscrew the nut and take out the steering wheel, remove the steering wheel cover too, and attach it to the new steering wheel.