What is the diameter of the VAZ 2107 steering wheel and its replacement and repair

We install electric power steering on a VAZ 2114 with our own hands

From its very production, the steering system of the VAZ 2114 car assumed the possibility of installing power steering using an installation kit.
This also applies to electric power steering or simply EUR. This modification will make it easier to turn the car and increase comfortable handling. This is especially true for drivers who drive in the city most of the time.

The main difference between power steering (power steering) and electric power steering is that the strength (efficiency) of the former directly depends on the speed of the engine. At high speeds, turning the steering wheel is too easy. This affects both ride feel and handling.

To overcome such problems, the power steering is not connected directly to the motor, but using a gain regulator. This is exactly the functionality that an electric amplifier has. The operation of the electric power steering is not characterized by a direct connection between effort and motor power, which allows it to be used as much as necessary in a specific situation.

Electric power steering for VAZ 2114

For the VAZ 2114, a similar EUR is suitable as for the Lada Priora.

Additional advantages of using an electric booster instead of power steering:

• Less maintenance requirements (no need to monitor oil, connections).
• In cold weather there is no need to warm up, as when using power steering.
• Installing the EUR is much easier (no need to interfere with the engine compartment).
• High reliability.
• The only downside is the lower power, although on passenger cars like the VAZ 2114 this is not at all noticeable.

Steering column switches

The left steering column switch turns on the turn signals and controls the headlights, while the right one controls the operation of the windshield wipers and washers. Position of the levers of the steering column switches 1 - lever for the direction indicators and headlights: I - (neutral position) the direction indicators are off, the low beam headlights are on, if the headlights are on with the external lighting switch; II — left turn indicators are on (non-fixed position); III — left turn indicators are on (fixed position); IV — right turn indicators are on (non-fixed position); V — right direction indicators are on (fixed position); VI - (self-directed) the high beam headlights are turned on regardless of the position of the external lighting switch (non-fixed position); VII - (from yourself) the high beam of the headlights is on, if the headlights are on (fixed position) 2 - switch lever for the windshield wipers and washers: I - (neutral position) the windshield wipers and washers are off; II — intermittent operation of the windshield wiper is turned on (non-fixed position); III — intermittent operation of the windshield wiper is turned on (fixed position); IV — low speed windshield wiper is on (fixed position); V — high speed windshield wiper is on (fixed position); VI — (self) the windshield washer is turned on (non-fixed position); VII* — (from yourself) the tailgate glass cleaner is turned on (fixed position); VIII* — (from yourself) the tailgate glass cleaner and washer is turned on (non-fixed position); a — time setting key; b — key for switching operating modes of the liquid crystal indicator

*For cars with hatchback and station wagon bodies.

Standard switches can be easily replaced with steering column switches from Chevy Niva, Kalina, Priora .

Installation instructions

Installing the main unit

When installing an electric power steering, it is necessary to take into account that it will be necessary to replace the steering column of the VAZ 2114 with an “electrically driven column”. To do this, let's start with the wiring. You will need to deal with the pads. There will be no need for any “twists”. There is a terminal in the block that we need to remove and insert into the block in the harness.

We insert the free terminal of the harness exactly into the place where the standard wire was. You don't need a special harness for this. Connect two 4 square wires to the battery. Don't forget to connect a 50A fuse. The “weak point” will connect to the tachometer, speed sensor, ground, K-line and wiring to the warning lamp. Don't forget to check the presence of speedometer and tachometer signals.

1. Remove the casing with switches and ignition switch.
2. Unscrew the bolt on the rail and remove it. We need to determine how much larger the “native” part is than our new one.
3. We install the shaft on the EUR. After this we attach the shaft itself in its place.
4. Setting up the wiring. We stretch two cables to the battery from the passenger compartment, preferably through the left wing. To conduct wiring you can:

• First remove the washer fluid reservoir.
• Take a solid wire and drag it through, trying to get to the hood.
• As soon as it appears near the hood, we attach our wires to it.

Location of mounts for electric power steering in a VAZ 2114

• We pull it out together with our wire.

1. We connect the EUR electronics. There is a red connector under the instrument panel with an orange wire in it. It is to this that you need to connect the electric amplifier.
2. Similar procedures must be done with the gray wire.
3. We connect the power ends. In the battery we connect the pink one is a plus, and the black one is a minus.

The installation is now complete. If you did everything carefully according to the instructions, you will enjoy the ease of driving the VAZ 2114.

Adjusting the steering wheel position

If you don’t like the height and position of the steering wheel, then you will need to grind the edges of the shaft to the size you need or install gaskets between the plate and the body. It is worth remembering that the electric power steering is automatically switched off at speeds above 50 km/h, unlike the same power steering.

Installing electric power steering on your own is quite possible. You just have to remember that even for an experienced driver it will take a lot of time and effort. But for a lover of comfortable driving, the result will justify all costs and hopes.

Installing a calibrated steering wheel on a VAZ 2114

Everyone knows what a wretched steering wheel the VAZ 2114 has; from the moment I bought it, it annoyed me, but I didn’t want to change it to Chinese crap. And so I found a way to buy a steering wheel from a viburnum but with a VAZ 2110 contact group (this kind of steering wheel was installed on the re-staling panel) I went and bought a steering wheel

Next we go to our TAZ, take a screwdriver, unscrew the three bolts securing the signal button, take a 24mm socket, and loosen the steering wheel nut, carefully knock the steering wheel off the splines, unscrew the steering wheel and calmly remove it) Without breaking your jaw) For comparison, there are two steering wheels

Well, what happened))) Everything fits without modifications, very convenient and comfortable))) I’m very pleased. I moved the emergency button to the place of the cigarette lighter, and made a hole for the cigarette lighter and installed it next to it))) That’s all))) See you again

Size chart for steering wheel braids

How to remove the steering wheel?

Dismantling the steering wheel on VAZ 2114 and 2115 is carried out using the same method. However, remember that according to the Code of Administrative Offenses, replacing a steering wheel with a steering wheel different from the original is considered illegal modification of the steering structure and vehicle control system. Such tuning falls under Part 2 of Article 12.5 of the Code of Administrative Offenses on driving a vehicle in the presence of malfunctions or conditions under which its operation is prohibited. Recently, traffic police officers have been quite zealous in catching violators of this article, so think carefully before embarking on the replacement process.

The standard VAZ 2114 steering wheel looks unattractive, so someone may want to replace it

Required Tools

To remove and then install a new steering wheel, you will need the following tools:

• new steering wheel (make sure the part you choose fits your car);
• set of screwdrivers with straight and Phillips slots;
• 24 mm socket head;
• pencil or marker;
• hammer (in some cases);
• a soft metal drift (included with the hammer);
• wire cores (in some cases).

Please note that after completing all the work, you will have to remove traces of a pencil or marker from the steering wheel cover and front panel. To avoid problems with subsequent cleaning, consider the coating material of these interior elements. You should not use permanent, or as they are also called, indelible markers, especially if the parts are covered with high-quality natural leather of a light shade. The easiest way to remove marker is water-based. But it is better to use a regular pencil: it can be erased with a regular eraser.

Steering wheel removal process

There is a signal inside the steering wheel that receives power from the battery, so the first thing you need to do is turn off the power to the car. To do this, you just need to disconnect the negative terminal. After this, you can safely begin the dismantling process.

1. Remove the ignition key from the lock.
2. Turn the steering wheel so that the system locking the steering shaft is activated. Your steering wheel is now locked in a straight position.
3. In order to subsequently correctly install the new part while maintaining control accuracy, apply a mark to the steering wheel with a pencil. Place a similar mark on the dashboard right next to it.
4. Using a straight screwdriver, pry the cover with the Lada inscription on the steering wheel and remove it. This element is attached using ordinary plastic clips, so removing it is not difficult. However, due to the thin plastic, the part breaks easily. If you plan to continue using your old steering wheel, be careful.
5. Under the trim you will see two screws. They hold the steering wheel cover. Unscrew them using a Phillips screwdriver and then remove the cover.
6. In the central part of the structure you will see a large nut. It should be unscrewed using a 24 mm socket.
7. The steering wheel no longer holds anything. To remove it, grab the steering wheel with both hands and pull each side in turn. There's no point in trying. If the part has not been dismantled before, it will be quite difficult to move. Do not try to remove the part with one jerk: you may accidentally injure yourself.
8. If attempts to remove the steering wheel using the method described in point 7 are unsuccessful, use a small hammer and drift. In addition to additional tools, you will need an assistant. One person from the pair should pull the steering wheel, and the second should hit the drift attached to the end of the steering shaft with a hammer.

What kind of steering wheel can I install?

If you decide to replace your old steering wheel, it means that its appearance did not suit you in some way. Of course, the issue may be a breakdown or external damage, however, even in this case, you should consider installing third-party models. What if you like one of them much more than the previous steering wheel?

Sports models

When tuning their iron horses, car enthusiasts often look at sports steering wheels. Their appearance helps create the image of a fashionable racing car. The sports steering wheel has a smaller diameter than a regular steering wheel, which significantly improves maneuverability. In addition, it saves space inside the car. And various design options give room for creativity when styling the rest of the interior.

The design of a sports steering wheel can refresh the interior of the car

Unfortunately, sports steering wheel models have as many disadvantages as advantages. It is not as safe in a collision as the stock steering wheel. Its construction uses metal, so upon impact, the risk of serious injury increases. In addition, sports steering wheels are not equipped with airbags.

To install such a steering wheel you will need special adapters. They can be divided into two categories:

Moreover, the latter are much safer, since in the event of an accident they can fold up and absorb part of the energy.

The corrugated adapter for the sports steering wheel can fold upon impact, therefore it is considered injury-proof

Buy a sports steering wheel from trusted stores and from well-known manufacturers. Make sure you have the appropriate certificate. A poor-quality steering wheel, even with a corrugated adapter, can play a cruel joke on you if you get into an accident.

Steering wheels from other VAZ car models

Steering wheels from more modern models of VAZ cars, such as Lada Priora, Kalina or Granta, look prettier and are much more comfortable in the hands. Installing them will not be difficult, provided that you replace not only the steering wheel itself, but also the steering column column. Otherwise, the hub size will not match.

The Lada Kalina steering wheel looks more stylish and presentable than the standard part from a VAZ 2114 or 2115

Read on to learn how to choose the right steering wheel for the VAZ 2114 and VAZ 2115.

What you need to know when installing

Please note that not every steering wheel is suitable for installation on VAZ 2114 and VAZ 2115 cars. You need to choose a steering wheel with the same contact group as the original part.

choose a steering wheel with the same contact group as that of the VAZ 2114 and 2115

This is quite easy to do if you plan to install a steering wheel from other VAZ models. For example, a steering wheel with a Europanel from a VAZ 2110 is ideal for these purposes.

If you have chosen a Lada Kalina car, then its steering wheel should be marked 1118–3402010. With it you will also have to install the upper casing marked 2110–3403070–30, as well as the lower casing 2110–3403072–30.

To install a non-standard steering wheel on a VAZ 2114, use the steering shaft housing 2110–12

If you like sports models, then you will have to purchase a special adapter designed for VAZ 2113–2115 cars. This adapter is installed on the steering shaft, and the steering wheel is mounted on top. An adapter model suitable for this purpose is PROSPORT RS-04282.

for installing a sports steering wheel on VAZ 2114 and 2115 cars, the PROSPORT RS-04282 adapter is suitable

Steering wheels for VAZ 2108 - 2109

VAZ2108 - 2109 cars are created in a more modern style, so so-called “racing steering wheels” are often used for such cars. Its main difference is its size, it’s just a little smaller in diameter.

Steering wheel for VAZ 2108, 2109, 21099 No. 1

Steering wheel for VAZ 2108, 2109, 21099 No. 2

Of course, it’s harder to make turns with such a steering wheel, there is less force available, but after driving a little, you get used to it, and it turns out to be much more convenient than the usual classic steering wheel. The fact is that with habit, the driver notices how much more comfortable and agile the steering wheel becomes. Although the gear ratio from the shaft does not change, the diameter of the steering wheel changes, and this gives a feeling of better sensitivity in driving the car.

Installation Rules

Installing the steering wheel is a dismantling process in reverse order. If you can handle the removal, then you will be able to install it.

1. Installation begins by transferring the mark from the old steering wheel to the new one. Be extremely precise: the correctness of further control of the machine depends on this. The mark on the new part should be exactly in the same place as on the previous one.
2. Put the steering wheel back in place. Make sure that the mark on it and on the front panel match the same as in the case of the old part.
3. Replace the central nut and tighten it. If it does not fit tightly in the socket head, insert the wire strands between them. When the nut is in place, remove the wires and secure the nut tightly.
4. Replace the steering wheel cover and tighten all screws.
5. Make sure the steering wheel is straight. If even a slight displacement is observed, the part will have to be reinstalled.
6. Replace the battery terminals and test your new steering wheel by driving it away from major roads. At first, its diameter may be unusual, but the ease of driving should remain the same.

Steering wheels for VAZ 2113 – 2115

The VAZ 2113 – 2115 models are created on the basis of modern cars, which ensures comfort and convenience when driving it. The body and chassis are more perfectly designed. Such cars are often left as is, that is, when buying a steering wheel, they choose classic options, with imitation wood and rich leather.

Steering wheel for VAZ 2113, 2114, 2115, option No. 1

Steering wheel for VAZ 2113, 2114, 2115, option No. 2

Some people decide to decorate the interior in a racing style, in which case they choose the most modern models, here you only need to focus on the price, that is, how much you are willing to pay for a new steering wheel for your car. Modern manufacturers produce a huge assortment of car steering wheels, so there is simply no point in describing each of them; there are certain main differences between the models, but in general, any of the proposed steering wheels can be installed on any car produced by VAZ.