What sizes of wheels and tires are suitable for VAZ 2109 and VAZ 2110

The entry is mostly for myself, I’m tired of constantly googling this article, so I’m making a copy-paste

Let's face it, the standard VAZ 2109 wheels with dimensions of 175/70 R13 do not look particularly impressive visually. It's all about the high profile of the rubber with a visually small diameter of the disc itself. Therefore, car enthusiasts often have a question: is it possible to install wheels of a larger diameter, 14 or even 15 inches, on a VAZ 2109 without compromising the car’s performance and passing the next technical inspection? You will find the answer to this question by reading this article.

So, you can install R14 wheels on VAZ 2109, 2108, 21099, 2114, 2115. The disk parameters should be 5, 5.5 or 6 inches wide and have an offset of 35-40 mm. You can also install cast or forged wheels with the same parameters. Other parameters of the disks: holes 4x98 mm, central hole diameter at least 58.5 mm.

In this case, it will be necessary to select tires of the appropriate size so that the overall diameter of the wheel remains approximately the same. Otherwise, when turning the wheel, the tire will touch the wheel arch liners or suspension elements, which, of course, is not what we want

Acceptable tire sizes for 14-inch wheels: 175/65 R14 and 185/60 R14. Moreover, the second option is preferable.

However, the diameter of the wheel can be calculated very simply if you know how the characteristics of the rubber are deciphered. Let's do this for the VAZ 2109.

Let's take a standard 175/70 R13 wheel. 175 – tire width in millimeters; 70 – height of the rubber profile as a percentage of the width, that is, in our case 175 x 0.70 = 122.5 mm

Disc diameter 13 inches = 13 x 25.4 = 330 mm.

The total wheel diameter is the sum of the rim diameter and two profile heights. Total 330 + 122.5 x 2 = 575 mm.

Having carried out calculations in a similar way, we obtain the following figures for comparison:

175/70 R13 – 575 mm; 175/65 R14 – 583 mm; 185/60 R14 – 577 mm.

We see that the last option is the most suitable. It is also 10 mm wider, which will provide us with a shorter braking distance due to the increased contact patch with the road, better handling, and resistance to tire bending in corners at high speeds due to the reduced profile height. But at the same time, a wide tire is more prone to hydroplaning at high speeds than a tire with the same parameters, but narrower. Also, impacts from driving through road potholes will be more strongly transmitted to the body of a car with wheels of low profile height. To confirm your words, data on permissible wheel rim sizes can be found in the factory instruction manual. Wheels with a larger diameter, for example 15 inches, are also suitable for the Samara, but they are not recommended by the factory, so there may be problems with passing the technical inspection. For such wheels, you should choose tires with a dimension of 185/55 R15. With a stretch, 195/50 R15 will also work, but it’s better to play it safe and try it on if your friends have similar ones. In this case, the wheel may “rub” due to the tire being too wide.

Reading time: 7 minutes

Every owner of a domestic car sooner or later thinks about this question - which wheels are best to install on a VAZ 2109. In this case, it is necessary to determine the size of the wheels and the method of their manufacture. It is possible to install stamped and light alloy products of various sizes on the machine. It is also important to know the parameters of VAZ wheels so that the kit fits perfectly.

Wheel parameters suitable for LADA (VAZ) 2108 - 099

For Samar, stamped steel wheels with a width of 5 or 5.5 inches with an offset (ET parameter) of 38 - 40 mm are suitable.
Light alloy wheels can also be installed. In this case, the disk width should be 6 inches, and ET should be 33 or 35 mm. In this case, a tire with a size of 175/65 R14 is used - for example, the same as in the factory equipment of a VAZ-2110 or Skoda Fabia. It is possible to use tires with a width of 165 and 185 mm. In addition, installation of 15-inch wheels on “nines” and “eights” is allowed - provided that wheels with an ET of 30 - 35 mm are used and with sufficiently low-profile tires 185/55 R15. They also drive V8s with 195/50 R15 wheels. But even more “cool” tires 195/55 R15 and 205/50 R15 are installed only on the front axle or simultaneously with modifications to the suspension or wheel arches.

Based on the operating experience of “re-shod” Samaras, we can say that the recommended tire size for R15 rims is 195/50, and for R14 – 185/60.

Let us also recall that for any VAZ wheels, the diameter of the circle where the four mounting bolts are located (PSD) is 98 mm, which is coded in catalogs as 4x98. The diameter of the central hole in the disks for Togliatti cars should not be less than 58.5 mm.

Installing low-profile tires improves vehicle handling when maneuvering and increases cornering speed. Low tire beads crumple less under lateral loads on the tire, and the steering becomes “sharper” and the car deviates less from the trajectory. But such wheels absorb road surface defects worse and transfer more shock loads to the body when driving over uneven surfaces. In addition, a tire with a low profile, even when driving through a pothole at low speed, can easily be “punched” to the disk, the edge of which can become wrinkled until it completely fails.

It is worth noting that traffic regulations prohibit the operation of vehicles with tires whose size “does not correspond to the vehicle model.” However, the practice of operating tuned VAZs shows that traffic police officers usually have no complaints about 14-inch wheels - obviously due to the fact that the wheels are “14”, similar in chassis to “eights” and “nines”. But with fifteen-inch wheels, the likelihood of running into trouble during inspection is higher.

Source

Other settings

In addition to the basic characteristics of the tire and wheel, there are other important indicators that must be taken into account. One of them is wheel offset, which is the distance from the wheel hub to the middle of the rim.

You can also increase the car's ground clearance using spacers for shock absorbers. You can install them yourself. Then the offset can be made smaller, but its deviation from the recommended one leads to a change in the load on the hub bearing. This will result in a reduction in its service life and affect the controllability of the car.

The offset can be made less than recommended for wide rims. If the discs are narrow, then you can take more. To make the right choice, it is advisable to seek help from a specialist, from whom you will receive precise instructions on what parameters are needed. When purchasing disks, it is extremely important to accurately select the mounting dimensions for the mounting bolts and nuts (PCD). If the choice is made even with a slight error, a disc with a slight PCD deviation that is not visually noticeable can be installed on the hub. Then some bolts will fit exactly, while others will fit misaligned. Such a wheel will begin to “figure eight”, and the nuts will spontaneously unscrew.

What sizes of alloy wheels are suitable for the VAZ 2109

The entry is mostly for myself, I’m tired of constantly googling this article, so I’m making a copy-paste

Let's face it, the standard VAZ 2109 wheels with dimensions of 175/70 R13 do not look particularly impressive visually. It's all about the high profile of the rubber with a visually small diameter of the disc itself. Therefore, car enthusiasts often have a question: is it possible to install wheels of a larger diameter, 14 or even 15 inches, on a VAZ 2109 without compromising the car’s performance and passing the next technical inspection? You will find the answer to this question by reading this article.

So, you can install R14 wheels on VAZ 2109, 2108, 21099, 2114, 2115. The disk parameters should be 5, 5.5 or 6 inches wide and have an offset of 35-40 mm. You can also install cast or forged wheels with the same parameters. Other parameters of the disks: holes 4x98 mm, central hole diameter at least 58.5 mm.

In this case, it will be necessary to select tires of the appropriate size so that the overall diameter of the wheel remains approximately the same. Otherwise, when turning the wheel, the tire will touch the wheel arch liners or suspension elements, which, of course, is not what we want

Acceptable tire sizes for 14-inch wheels: 175/65 R14 and 185/60 R14. Moreover, the second option is preferable.

However, the diameter of the wheel can be calculated very simply if you know how the characteristics of the rubber are deciphered. Let's do this for the VAZ 2109.

Let's take a standard 175/70 R13 wheel. 175 – tire width in millimeters; 70 – height of the rubber profile as a percentage of the width, that is, in our case 175 x 0.70 = 122.5 mm

Disc diameter 13 inches = 13 x 25.4 = 330 mm.

The total wheel diameter is the sum of the rim diameter and two profile heights. Total 330 + 122.5 x 2 = 575 mm.

Having carried out calculations in a similar way, we obtain the following figures for comparison:

175/70 R13 – 575 mm; 175/65 R14 – 583 mm; 185/60 R14 – 577 mm.

We see that the last option is the most suitable. It is also 10 mm wider, which will provide us with a shorter braking distance due to the increased contact patch with the road, better handling, and resistance to tire bending in corners at high speeds due to the reduced profile height. But at the same time, a wide tire is more prone to hydroplaning at high speeds than a tire with the same parameters, but narrower. Also, impacts from driving through road potholes will be more strongly transmitted to the body of a car with wheels of low profile height. To confirm your words, data on permissible wheel rim sizes can be found in the factory instruction manual. Wheels with a larger diameter, for example 15 inches, are also suitable for the Samara, but they are not recommended by the factory, so there may be problems with passing the technical inspection. For such wheels, you should choose tires with a dimension of 185/55 R15. With a stretch, 195/50 R15 will also work, but it’s better to play it safe and try it on if your friends have similar ones. In this case, the wheel may “rub” due to the tire being too wide.

Source

Operating rules

Following these recommendations will significantly extend the life of your light alloy wheels.

1. Try to avoid bumps, which requires more careful driving.
2. Park carefully and pay close attention to where you park your car.
3. Avoid hitting holes and potholes. This is dangerous for a car with any wheels, but if the stamping can still be restored later, the light alloy will have to be sent to a landfill.
4. When moving on rails, do not gain high speed. Impacts on metal can cause not only deformation of the discs, but also damage to the suspension.

Select your year 2109 1.6i 2109x

The VAZ 2109 1.6i 2109x model was produced from 1998 to 2006. Table of factory and suitable tire sizes for VAZ 2109 1.6i 2109x.

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source

Large disc elements

Larger wheels (15 inches) can be installed on the Samara. However, the manufacturer does not recommend doing this, so problems may occur during technical inspection.

The 185/55 R15 tire fits these wheels. Of course, you can try to install 195/50 R15. Before installation, be sure to take all measurements. It is possible that the wheel will begin to “rub”, since the width of the rubber is too wide.

The installation of a non-standard wheel rim must take into account the driving style of the car. For example, fans of fast driving can be advised to install durable and at the same time light wheels on the “nine”, since heavy ones will not allow them to develop good speed.

Car enthusiasts with little money don’t really need expensive alloy rims. To make your car look attractive, it is enough to install beautiful hubcaps, the cost of which is affordable for every motorist.

VAZ 2109 size of rims, tires, wheels, rubber

VAZ 2109 is a 5-door front-wheel drive hatchback produced at the Volzhsky Automobile Plant. In comparison with the “related” VAZ-2108, the model was positioned as more “solid” and intended for a family man, since it was endowed with a less expressive appearance and 5 doors. Due to the characteristic contours of the body, the car was often called a “chisel”.

“Nine” represents class B. The main competitors of the model include Skoda Felicia and Renault 19. The Russian car was inferior to its “classmates” in reliability, but was much more affordable.

The peak of popularity of the VAZ 2109 occurred in the 90s. Then production of the model opened in Belgium and Finland. However, the production of the “nine” soon ceased in these countries. In 2004, the model was discontinued at the Volzhsky Automobile Plant. Until 2011, the VAZ 2109 was produced in Ukraine.

Brief overview of manufacturers

We provide a list of producing countries and a brief description of the products of each of them.

1. Products from China. The selection of Chinese alloy wheels is truly huge. Contrary to traditional opinion, it is worth noting that not all Chinese products are of low quality. Therefore, it would be appropriate to go shopping for wheels with a friend or acquaintance who has already purchased wheels from a certain Chinese manufacturer before and can confirm their quality.
2. Alloy wheels of domestic production are known to everyone for their affordable price and corresponding quality for the money. Alloy wheels for a Russian-made VAZ are a completely acceptable and adapted option.
3. The quality of alloy wheels from Turkey can be assessed as sufficient. However, the cost will be slightly higher than that of domestic analogues.
4. Asian manufacturers (South Korea, Japan, Taiwan) produce alloy wheels of fairly high quality and are recommended for use on all brands of cars.
5. Manufacturers from Western Europe and the USA offer the highest quality products, but also the most expensive. It’s worth thinking about whether it’s really necessary to purchase wheels for the “ten” at this price.

Generation 1

Sales of the “nine” started in 1987. Externally, the model was almost completely identical to the VAZ-2108, differing from it only in the number of doors. The car retains the same styling: angular body features, a relatively slight slope of the windshield, a large protruding bumper and noticeable rectangular headlights. Despite the similar design and dimensions, the “nine” and “eight” were fundamentally different cars. The width of the front doors in the VAZ-2109 was reduced by almost 250 mm. In the appearance of the model one could guess the swiftness of the lines, but the sportiness became much less.

The interior of the “nine” turned out to be extremely practical. At the same time, the developers managed to increase comfort indicators. The car now has a “low” instrument panel, which has become more convenient. The front seats received headrests, and the upper belt attachment points were height-adjustable. Upholstery with inserts and optional fabric seats added to the model's prestige. The folded rear seats made the VAZ-2109 look like a station wagon. The cabin had ventilation and heating systems.

The first modernization of the car took place in 1989. The front part of the body has been slightly refined. The entire restyling consisted of a transition to “long” front wings, replacing the “short” version. In 1990, the model received a new 1.5-liter engine (72 hp). The modernized version was called VAZ-21093. It was this modification that became the most popular. By the mid-1990s, 1.1- and 1.3-liter engines were excluded from the line of power units. The engines were combined with 5-speed gearboxes.

The next restyling of the model took place in 1995. They stopped melting the radiator grille. The last cosmetic improvement of the VAZ-2109 happened in 1997. The car has not changed again.

Wheel and tire sizes

Source

VAZ 2105-2107

Technicians from VAZ at the initial stage developed original car wheels for Zhiguli. Outwardly, they were similar to prototypes 21 - angularity and rectangular holes, there was no central cap. Similar decisions were made by European car manufacturers such as Audi, Volkswagen, BMW.

Just before release, the developers simplified the shape of the hub. Nevertheless, the finished car wheels were practically no different from previous car models. However, they used the same oval shaped holes as the 2103 wheel.

As for the wheels on the 2107, wheels identical in design to the 2105 were used for this car. The change was four ventilators. holes, while 2105 had five.

These models were produced in a small batch, so until 1995, wheel products from the five were used. Note that some models of 2105 disks were used on 21065.

What size tires for the VAZ 2109. Which tires are better for the “nine?” How to choose stamped products

The VAZ 2109 belongs to the Lada Sputnik family - a five-door modification of the previous model 2108 from the Lada Sputnik family.

Classic models came off the factory assembly line with standard rims stamped from a steel alloy:

Before deciphering the markings, you need to understand what technical sizes and parameters of car wheels are accepted. Regardless of the manufacturing method, cast or stamped, they are designated in the same way. There is a mark on the outer surface that displays all the necessary information.

Bolt pattern - dimensions

This wheel parameter for VAZ cars is marked with the following combination – 4×98.
As mentioned before, this is a standard value for all models of domestic manufacturers. It is deciphered quite simply. So:

• the first number (4) only indicates the number of fasteners provided to secure the disk;
• the second (98) means the gap between the holes (or rather their centers) in millimeters.

Many have noticed that the corresponding markings on foreign vehicles begin with the number 5. As you might guess - this should be understood this way - the disc is attached directly to the hub with exactly the same number of bolts.

If you draw a circle through the holes, you get the total diameter. In particular, the VAZ-2109 leaves the factory assembly line with wheels measuring 13 inches.

They use tires of the following marking – 175/70 R13.

When planning to purchase third-party wheels for your car, it is important to know which ones are suitable for your model. In particular:

• It is best to choose those that have the following dimensions - 5.5 by 13.5 inches;
• 5.5 by 14 is also not bad;
• It will be possible to install 6 to 14.

In theory, it is possible to attach even larger ones, but usually this requires certain changes to the design of the vehicle itself.

In addition to the previously mentioned number of attachment points and the distance between them, designated as PCD, there are also other dimensions:

• the diameter of the central hole (DIA) of the nine is 58.1 millimeters;
• offset (ET) is indicated as +40.

If you purchase discs with a lower ET value, the grip on the road surface will increase significantly, which means:

• controllability will deteriorate;
• fuel consumption will increase;
• wheel bearing wear will accelerate.

Mounting values ​​on the disk (bolt pattern parameters)

When installing, it is important to take into account the fitting size recommended by the manufacturer, since differences may be due to different calculation systems (metric or imperial).

Important! Often, car enthusiasts confuse PCD values ​​due to a difference of just a couple of mm. For example, the standard size for the two central holes is just a visually imperceptible deviation of 2 mm - this is PCD at 4/98 and 100. Only 1 bolt will turn out to be completely tightened, and the remaining 3 will be undertightened, which will ultimately lead to an emergency.

Dimensions of wheels, tires and disks VAZ 2109 1997

The highlighted entries mean factory sizes, the rest are replacement options

VAZ 2109 1997 1.1

Tire Disc Drill Pressure

VAZ 2109 1997 1.3

Tire Disc Drill Pressure

VAZ 2109 1997 1.5

Tire Disc Drill Pressure

VAZ 2109 1997 1.5i

Tire Disc Drill Pressure

Dimensions of wheels, tires and disks of VAZ 2109 of other years of production

Installation of rims on R14, 15 on the VAZ-2109 model

The standard wheel with parameters 175/70 R13 is not particularly visually “noble” compared to the larger version R14 or R15. This is due to the large height of the rubber profile, which visually “overshadows” the already small dimensions of the disk.

Technical features of the VAZ-2109 model provide for the installation of wheels of categories R14 and R15 - forged or cast light alloy. The width of the discs can be from 5 to 6 inches with an offset characteristic of 35 to 40 mm. The remaining values ​​regarding PCD and DIA correspond to 4x98 with a central connector diameter of 58.5 mm.

In this case, the selection of tires must be carried out on the basis that the overall diameter of the wheel is within the standard value. Failure to comply with this condition will result in the tire starting to rub the wheel arch liners and suspension parts while turning.

VAZ 2103-2106

Wheels of the new model were installed on the “three”. In terms of appearance, they are close to the Fiat wheels used on the 2101 version. They have 16 round holes each with an increased rim width of up to 9.5 inches and a reduced offset of up to 29 mm.

Similar models were used for the VAZ 2103 and VAZ 2106 cars. At the same time, chrome caps from a penny were installed on the 2103 versions, and the original ones were used on the six, which were distinguished by a round black trim in the center.

Initially, for the 2106 model, manufacturers planned to use other versions of disks. However, the intended angular style echoed the design of trendy aluminum (alloy) wheels, so they decided not to use them.

On car releases in 1991, wheel covers from model 2101 were used on rims. Since 1995, developers have removed the protrusions for the hubcaps and began producing rims similar to 2103 for all VAZ car models.

To install the disc on the 5 and 7 Zhiguli model with a chrome cap, the diameter of the centering hole was increased to 60.5 mm. Note that such wheels from 2103 without classic protrusions have become a “national treasure” for the entire AVTOVAZ line.

Dimensions of wheels, tires and disks VAZ 2109 2006

The highlighted entries mean factory sizes, the rest are replacement options

VAZ 2109 2006 1.5

Tire Disc Drill Pressure

VAZ 2109 2006 1.5i

Tire Disc Drill Pressure

Dimensions of wheels, tires and disks of VAZ 2109 of other years of production

Method of calculations

Based on the tire characteristics of a standard 175/70 wheel with a radius of R13, where:

To find out the total diameter of the wheel, you need to add the two obtained values, but the profile height comes in double size, i.e. (122.5x2) is added to 330 and the result is 575 mm.

Calculations are carried out using the same principle for a more visual perception, for example: for models 175/70R13, 175/65R14 and 185/60R14, it comes out to 575, 583 and 577 mm, respectively.

The last value will be most suitable for the VAZ-2109, since it is 10 mm larger in width. This will reduce the braking distance during operation, add controllability, and reduce tire bending when cornering at high speed. Fuel consumption will increase slightly, but potholes and potholes on the road will become less noticeable.

Wheel diameter calculations

If you have chosen 14-diameter wheels, you can use tires in two sizes: 175/65 and 185/60. These tire sizes have been tested in practice more than once, but if you want to see for yourself the plausibility, you can easily calculate the size yourself. Let's imagine the calculation procedure for a VAZ-2109 with standard 175/70 R13 wheels.

Initial data for calculation: tire width – 175 mm; profile height – 70; diameter - 13 inches. First, multiply the width by the height: 175 * 0.70 = 122.5 mm. Second number: 13 (disc diameter) * 25.4 = 330 mm. The permissible wheel diameter is obtained by adding the disk diameter and the profile height, multiplied by two: 330 + 122.5 * 2 = 575 mm.

You can do the same with larger wheels. So, for example, an R14 with 175/65 tires has a total diameter of 583 mm, and with 185/60 tires – 577 mm. As can be seen from the indicators, 185/60 tires are more consistent with the design of the car, and therefore we recommend using them.

In addition, such tires are wider, which means they have a larger contact area with the road, which increases friction and reduces the braking distance of the car.

Also, wide tires increase the overall handling of the car and reduce the tendency of the tires to break when cornering. Wide tires are not without their disadvantages. These include an increased tendency to hydroplaning and sensitivity to potholes on the road. Which tire to choose is the choice of every car enthusiast.

Dimensions of wheels, tires and disks VAZ 2109 2004

The highlighted entries mean factory sizes, the rest are replacement options

VAZ 2109 2004 1.5

Tire Disc Drill Pressure

VAZ 2109 2004 1.5i

Tire Disc Drill Pressure

Maximum and minimum parameters of non-standard disks

Tolyatti auto design engineers installed wheel rims with a radius of R15, but there are no direct reasons not to do this.

The problem is the difficulty of performing this operation without the involvement of specialists; the intervention of qualified craftsmen is necessary. The reason for this is the “conflict” of the rear arches and suspension parts with the new rims, and in some cases it is necessary to violate the factory design of the transmission.

Note! We should not forget about the mandatory technical inspection, and how traffic police officers will look at such an “upgrade”.

The suitable tire size for R15 wheels is 185/55 and even 195/50, but most likely such a large width will cause rubbing along the arch. Below are the recommended wheels for modifications to the VAZ-2109.

Recommendations when choosing

When choosing a set of new stampings or light alloys, be sure to pay attention to the following points.

1. All alloy wheels must be certified and supplemented with a quality mark and X-ray inspection.
2. All discs must have a mark from the regulatory authority and a document confirming that the discs have passed quality control and compliance with current standards.
3. The product indicates the maximum permissible load that the disk can handle.
4. The name and other information about the manufacturer is quite obvious information that you can and should read on the disk.
5. Product heat number, production method, marking and date of manufacture. If not, look for a kit in another store. This is clearly a counterfeit or questionable shipment.

Storage rules

Many car owners purchase two sets of wheels, one of which is used in winter, and the other in summer. This allows you not to transfer tires from one set to another every time.

But if you leave wheels in a garage or other place for a long time, you risk losing their original quality, since the storage rules were not followed.

Storage nuances

And they are quite simple.

1. Don't just throw the kit somewhere in the corner where some space has become available.
2. Before storing, mark the wheels so you know where the front left, rear right, and so on are.
3. Store wheels exclusively in a dry, cool and dark place. There should be no chemicals, gasoline or oil in the immediate vicinity of tires. These components are capable of destroying the structure of the wheels over time, so their service life is noticeably reduced.
4. If tires are stored with rims, they should not be kept in a standing position. Hang or place horizontally. Many experts advise using wooden pallets.
5. If the rubber is stored separately, it is located vertically. Moreover, the tires should be rotated once a month so that the pressure does not deform the compound. Do not hang or stack tires on top of each other.
6. Before storing, inspect the projectors and remove any stones or stuck pebbles.
7. Carefully check the condition of the wheels before installing them for the new season.

Wheels are more than just a visual decoration for a car. Safety, reliability of the suspension, fuel consumption and a number of other parameters largely depend on their quality and correct choice.

Every owner of a domestic car sooner or later thinks about this question - which wheels are best to install on a VAZ 2109. In this case, it is necessary to determine the size of the wheels and the method of their manufacture. It is possible to install stamped and light alloy products of various sizes on the machine. It is also important to know the parameters of VAZ wheels so that the kit fits perfectly.

Is it possible to install 4x100 disks?

This option can be seen quite often on the VAZ-2109. However, in reality this solution is not correct.

The problem is that the standard bolt pattern of the model in question differs relatively little from the factory one. It seems to many that these couple of millimeters do not matter. However, it is impossible to secure a 4×100 disk properly with ordinary bolts. There is a thickening on them (under the head) - it is this that does not allow the fasteners to be screwed in completely. Moreover, if you try to do this by force, most likely you will break the thread in the hub.

Therefore, they have to be secured with special eccentric bolts, and they have disadvantages that do not have the best effect on reliability. You should not forget about them if your own safety and that of your passengers is important to you.

Kinds

Analyzing the wheel rim market, the entire range can be divided into three types:

• Stamped steel;
• Light alloy cast;
• Light alloy forged.

Steel

Many cars, including the VAZ 2109, were equipped with stamped wheels from the factory. Outwardly, they are completely unattractive, and over time they lose their external characteristics. Let's be honest, this is a relic of the past.

Cast

But at the same time, steel stampings have their advantages, due to which this type of disc is still produced and is in impressive demand among consumers:

• Affordable price. These are the cheapest options available today;
• High strength indicators. Considering the quality of our roads, many people think primarily about quality, safety, and not external data;
• Reliability. They do not have to be changed almost every season, which results in impressive savings;
• With strong impacts, the stampings do not break or crack. They crumple as much as possible, which opens up opportunities for recovery and restoration;
• Easy to remove and change without outside help.

But let's be completely honest. With all their positive qualities, the disgusting appearance forces car owners to abandon reliability and durability in favor of image and external attractiveness. Moreover, you should not think that light-alloy options are absolutely fragile and break only from one type of damage.

Forged

Light alloy

If we talk about alloy wheels, they are made, as you may have guessed, from special light alloys.

A total of three types of alloys are used.

When choosing alloy wheel sets, be sure to compare their strengths and weaknesses. Appearance is far from the only criterion that you need to pay attention to when purchasing.

Advantages and disadvantages of light alloy

Compared to steel wheels, choosing light alloy options provides car owners with a fairly extensive list of advantages. But it is also important to know about the disadvantages.

In order to preserve the integrity of your beautiful, but not the most reliable, alloy wheels for a longer time, it is recommended to adhere to a few simple rules for their operation.

Tabular characteristics for selecting disks

Dimensions of wheels, tires and disks VAZ 2109 1999

The highlighted entries mean factory sizes, the rest are replacement options

VAZ 2109 1999 1.5

Tire Disc Drill Pressure

VAZ 2109 1999 1.5i

Tire Disc Drill Pressure

Dimensions of wheels, tires and disks of VAZ 2109 of other years of production

What wheels are recommended to be mounted on a VAZ-2109

The most suitable size wheels are 14 inches (R14). As stated above, installation of 15-inch ones is also allowed, but with low-profile tires. In this option, the stem should be in a gap between 30-35 mm, and tire models will fit this category: 185/55 or 195/50.

Large tires of the R15 series, for example 195/55 or 205/50, are suitable for mounting on the front axle. In order to insert them onto the rear axle, structural modifications to the suspension design and enlargement of the wheel arches will be required. The optimal sizes for installation on the VAZ-2109 are models 185/60 for R14 and 195/50 for R15.

On the ninth fret model, it is beneficial to carry out external tuning by replacing wheels, since this method is budget-friendly. It can be done on your own without any problems, if you do not try to mount very large rims.

More details about standard sizes

All over the world it is common to use the European designation system. For example, simple wheels for tubeless on a VAZ-2109 are 4 1/2 J-13H2 ET30.

• J – coded parameters for the rim flange in mm (this includes rounding radii, tilt angles, etc.). This paragraph includes a list of dimensions to obtain a highly specialized conclusion when conducting technical tests. There are other categories - D, E, F, etc.

• H2 – double hump or annular offset of the rim flange HUMP (it keeps the tubeless tire from slipping). There are also such variations of humps - H (simple), A (asymmetrical), CH (combined), FH (flat).

13 – bore diameter in inches.

The drawing below clearly shows the main parameters for the structure of the arrangement of technological holes and protrusions.

• ET30 or ET+30 – wheel offset in mm. The dimensions of the distances between the middle of the width of the disk and the mating plane (where the disk and hub are in contact) are indicated, respectively equal to 30 mm. Based on where the product is manufactured, the marking changes to OFFSET (negative) or DEPORT (positive).

For a minus value, a designation with a similar sign is used, for example “-ET30”.

Dimensions of wheels, tires and disks VAZ 2109 1992

The highlighted entries mean factory sizes, the rest are replacement options

VAZ 2109 1992 1.1

Tire Disc Drill Pressure

VAZ 2109 1992 1.3

Tire Disc Drill Pressure