Life hack: installing front and rear frills on a Lada Vesta car, main faults

The frill on the Lada Vesta car is located at the front and rear. This is a kind of protection from debris and precipitation, in addition to the fact that the frill covers the cracks of the rear window and rear trunk. For the Lada Vesta car, for additional protection, a mesh is also installed on the frill. Read the article to the end and we will cover this topic. The car body must be moderately sealed, protecting internal components and assemblies, the driver, passengers, and their luggage from bad weather, dirt, and debris. If the comfort of the driver and passengers is maintained, raindrops do not fall on them, and the temperature regime is set thanks to the stove with air conditioning.

In this case, it is worth paying tribute to the door seals, which do not allow moisture to pass through, moving it down through small grooves. The engine and trunk also have their own covers that protect everything inside from water and debris. The frill on the Lada Vesta under the hood protects the space from dust, dirt, leaves, and moisture.

At any time of the year, it is better to leave the engine compartment dry and clean - this way you will extend the life of your car. In addition, the moisture accumulated in the recess will begin to “fight” the paintwork, and leaves and dirt will try to interfere with the operation of the air filter. The frill on the rear window of a Vesta car closes the large gap between it and the trunk lid, leaving “paths” for moisture to drain from the car without getting inside.

Problem

The main problem associated with this body layout surfaces in the fall, when leaves begin to crowd into the wide opening. It is quite difficult to clean them out, and few people would want to constantly fish out fallen leaves from the opening.

But in winter the situation gets worse, as snow gets into the opening, which prevents the trunk lid from opening normally. But that's not all. Over time, if there is a thaw, it snows and rains, or the car occasionally drives into a heated parking lot, the snow in the opening melts and turns into ice. And this is a direct threat to Vesta’s paintwork. When opening the trunk, the ice simply peels off the paint from the edge of the trunk lid - in this case, all that remains is to repaint the part.

Without a frill, snow quickly accumulates in the opening.

Solution

As it turns out, it's quite simple. Manufacturers of accessories for the Russian sedan began producing rear window frills for the Lada Vesta. The frill is a plastic trim of a special configuration, which is inserted with one edge into the opening of the trunk lid (near the seal), while the other is placed on the glass.

As a result, the opening closes, and Vesta owners can safely drive without fear for the safety and appearance of their car. In addition, cleaning your car with a brush becomes noticeably easier, more convenient and faster.

This pad is made of durable ABS plastic, which is resistant to external influences. The color of the product is black, and light shagreen is visible on the surface.

Video review of frill for Vesta

Where can I buy?

As practice shows, the easiest way to buy a rear window frill for Lada Vesta is via the Internet. Fortunately, there are many offers from various stores. The most popular resources, as well as their prices, are presented in the table:

As you can see, the price of these goods is almost the same. Of course, many will not want to pay 1000 rubles for a simple piece of plastic, but this device will not hurt in any case. After all, the paint stripped from the trunk lid not only looks very unattractive, but also drives the Vesta owner into high expenses for painting the part.

Product characteristics:

Material

: ABS plastic
Dimensions
: 1200x130x40 mm.
Functionality
: Protection from debris, leaves, snow and ice.
Restrictions
: no
Manufacture
: PT Group (Russia / Tolyatti)
Suitable
for Lada Vesta sedan from 2015 to the present.

The cover in the rear window opening of LADA Vesta is designed to prevent the accumulation of snow, leaves and dirt in the trunk lid area. has developed its own version of the frill, which compares favorably with its competitors in some nuances: 1. Along the edges of the lining there are gutters for draining water from under the frill. 2. The ends of the frill are slightly bent so that dust and small debris do not get clogged under the cover. 3. Thanks to the change in the shape of the edge adjacent to the seal, the cover lies on the glass without tension, which improves the quality of the fit to the glass.

Installation:

The frill on the Lada Vesta is installed in the opening of the rear window and trunk and is fixed with 3M tape along the entire width of the glass and in the area of ​​the drainage gutter. Installation of the product does not require drilling additional holes in the car body. Installation requires compliance with all points of the included installation instructions.

Material:

The trim for the rear window opening (jabot) of LADA Vesta is made of ABS plastic (impact-resistant thermoplastic resin). The material is resistant to most types of chemicals: acids, alkalis and fats. An important factor in daily use is the increased rigidity of the structure and the scratch resistance of the surface.

Exploitation:

As practice shows, during daily use of the LADA Vesta, snow, leaves and dirt accumulate in the rear window opening. A lot of time and effort is spent cleaning this hard-to-reach place. After installing the frill, cleaning the rear window opening is much easier. The ABS plastic cover closes this cavity and even a large layer of snow is cleared after a few strokes of the car broom.

Advantage:

After installing the trim in the rear window opening of LADA Vesta, the car is not removed from the factory warranty. The frill is made of plastic similar to the factory one and after installation does not stand out from the overall style of the car. In terms of price-quality ratio, the trim for the rear window opening is one of the best offers on the market of additional accessories.

Availability

Name: Rear window trim (jabot) (ABS) LADA Vesta Sedan 2014-

Article:
V049-1400405/LVE112501
Availability in Dustershop77 warehouse (as of 02/05/22):
3 pcs. Applicability
Trim in the rear window opening (jabot) (ABS) LADA Vesta Sedan 2014 - suitable for Lada Vesta, Lada Vesta SW, Always in our warehouse in Moscow Unlike many other online stores, we work from our warehouse, it is indicated in the product cards the current quantity of goods in our warehouse and available for purchase. If the product is located at a remote or intermediate warehouse and additional time is required for its delivery to our warehouse, this must be indicated in the product card.

Quality

Only high-quality, proven products Unlike many other online stores, we work only with trusted suppliers. We know the product we sell and are confident in its origin and quality. Beware of fakes in other stores; due to their high popularity, there are now too many of them. Our store sells only original products. Our store is the first of those that began to promote products of Russian manufacturers; owners of Renault, Nissan, Lada, Chevrolet, Hyundai and other brands in all regions of the Russian Federation know us, and most importantly, they trust us. Thanks to our experience and knowledge, we leave our competitors behind, and our Clients receive the best quality product!

Where else can you find similar products?

Additional categories that are related to the product Trim for the rear window opening (jabot) (ABS) LADA Vesta Sedan 2014-: Door sills, body, bumpers, fenders Accessories

• Bumper covers, sills, fenders
• Covers for bumpers, body, sills, fenders for Lada Vesta

Payment

Payment in cash upon receipt of the order to the courier, or upon receipt of the parcel at the post office or upon pickup of the goods from the store

Bank transfer transfer of funds to the store’s personal account through any Sberbank branch or payment by transfer to a Sberbank card

Cash on delivery, Russian Post payment at the post office upon receipt of the parcel

Yandex Money transfer of funds to Yandex store wallet

Delivery

You can buy the product “Overlay for the rear window opening (jabot) (ABS) LADA Vesta Sedan 2014-” in Moscow and with delivery throughout Russia. In Moscow, the product “Overlay for the rear window opening (jabot) (ABS) LADA Vesta Sedan 2014-” can be picked up independently from the store warehouse or ordered delivery by courier. We can also send your order by Post to the address you specified. To make a purchase, add the desired items to your cart and place an order, or contact the store manager by phone indicated in the site header. We will be happy to help you with your purchase!

Delivery in Moscow 500 RUR we deliver goods to the address at a time convenient for you without prepayment

Delivery within the Russian Federation from 600 rubles is sent by post by cash on delivery with payment upon receipt, by transport companies throughout the Russian Federation and abroad

Pickup from the Moscow warehouse You can pick up the order yourself from the warehouse at the address: Moscow, Roterta str. 2. Be sure to coordinate the pickup of the order with the manager by phone.

Installation and service

A service for installing automobile accessories and spare parts is available. A service for installing purchased goods is available to customers in Moscow!
The cost of work can be found in the “Installation and Service” section. If the list does not include the service for installing the required part, the manager will inform you about it additionally, please contact us to clarify the cost in a convenient way or write a comment on the order. Reviews for the product Trim for the rear window opening (jabot) (ABS) LADA Vesta Sedan 2014-:

Installation

The rear window frill for the Lada Vesta on the reverse side is equipped with glued strips of double-sided tape, onto which the fixation takes place.

However, before installing the component, you need to remove the sealing rubber, the surface of the glass and the opening should be thoroughly cleaned of dirt, dried, and then degreased with anti-silicone. Only after this can you glue the frill without fear for the quality of the fastener. At the end, the standard seal is installed back.

Thanks to such a simple element as a rear window frill for the Lada Vesta, you will keep your car's paintwork intact, get rid of worries with snow, leaves and other contaminants, and also make the car more beautiful.

Installation of front and rear frill

This operation does not require a visit to the dealer at all. But the installation of the upper seal of the windshield is carried out together with the glass itself in order to maintain the tightness and strength of the installation. The frill mesh on the Lada Vesta is installed independently - just lift the hood, place the trim first vertically, and then deepen it into the hole under the windshield, tilting it slightly away from you, applying it to the glass itself.

For the rear window, the priority is to work with the trim without tape. Open the trunk, pull the trim back behind the lid so that it is under the levers. Remove the rubber seal, install the seal - it is made exactly to the size of the trunk. Put the seal back.

If you are going to install a more economical option, first apply sealant to the part that will be in contact with the body - the rest will engage with the glass due to its shape.