Instructions for assembling and installing the trunk on the Lada Priora


Roof rack for Lada Priora sedan and hatchback, installation of roof rails

The cargo capabilities of the VAZ 2171 station wagons are enormous.
And here there is a significant advantage not only in the volume of the trunk, but also in the presence of rails (cradles, arches) on the roof. The Priora sedan (VAZ 2170) and hatchback (VAZ 2172) are not equipped with roof rails from the factory, but you can install them yourself. There are two ways to place a roof rack on a Priora:

1. If models for the VAZ 2170, 2172 are not on sale, consider the roof rails from the VAZ 2110, 2112 (the roof and doors of the 10 are the same as the Priora). Accordingly, the installation is performed in the same way. First, the ceiling lining is removed, after which we check the presence of roof reinforcements. If the holes for attaching the rails do not fit into them, you will have to modify them. To strengthen the roof, we glue a sheet of metal (2 mm thick and 80x100 mm in size) with Moment epoxy glue. Don't forget to use rubber gaskets to avoid damaging the paintwork.

For fans of Priora tuning, there are Priora decorative roof rails, which are not suitable for carrying cargo. These accessories are simply glued to the roof using 2-sided tape.

2. Arches on the roof. Unlike roof rails, they are the most common and are much easier to find on sale. The disadvantage of this design over the first is that they are noisier at speed.

The installation of such arches is universal and is shown in the video. Remember to use spacers between the body and the mounts.

Source

Sedan

What does a driver need to understand? A sedan is a configuration in which the trunk in the cabin is linearly separated by a partition. The most popular body type among cars. It differs in its dimensions (in millimeters):

  • it is longer - 4350;
  • height – 1420;
  • width – 1680.

Read more: Road sign minimum speed

It is worth paying attention to the ground clearance (clearance) - 165 mm and the track width of the front and rear wheels - 1410 and 1380 mm, respectively. The trunk can fit about 430 liters of cargo.

In terms of the amount of fuel consumed, both the sedan and the hatchback are almost the same.

Life hack: Priora roof rack - types, installation

The roof rack of a Priora car has two functions: for beauty and functionality - when you need to transport something from point A to point B. You can increase the carrying capacity using a roof rack on the car. The standard equipment of the Lada Priora in sedan, hatchback and station wagon does not include roof rails. You can install the trunk on the Priora yourself. Railings are different, the price is also different. Average price: 3,000 - 25,000 rubles.

Drivers looking to buy a practical, roomy car should consider purchasing a Lada Priora. VAZ takes into account the comments of customers and assembles cars with a spacious luggage compartment - if this is not enough: put an additional luggage rack on the roof. Read the article to the end and we will cover the topic of roof rails for you!

Hatchback

The domestic manufacturer produces better and better cars each time, as it takes into account the mistakes of previous models.

The hatchback differs in its dimensions from the sedan (in millimeters):

  • length – 4210;
  • width – 1680;
  • height – 1435;
  • The ground clearance and track width of the rear and front wheels are the same as those of the sedan.

The hatchback is considered the most spacious, according to Autoreview magazine. What is the trunk volume of the most popular Lada Priora hatchback? It is very similar to the sedan, but it has a smaller trunk and a shorter rear overhang. This body type, when compared with the Lada Priora sedan, is smaller, but if you look more closely, it is very roomy. Its dimensions are (mm):

  • length – 910, and with the sofa folded – 1700;
  • width – 1500, between wheel arches – 930;
  • the size from the floor to the trunk shelf is 523, and the loading area is 720.

Unfortunately, the hatchback has a capacity of only 360 liters of various cargo, but the driver can fold down the rear seats, which significantly increases the volume of the car up to 705 liters! And this is a lot.

Fixation options

Longitudinal fixation; Transverse. Each option has its own pros and cons.

If you want to buy a Lada Priora car and are going to increase the load capacity with the top trunk, make sure there are special holes for fastenings.

Longitudinal locking rack

The trunk of this modification comes in two categories.

Functional

Fastens securely. Designed for transportation of heavy, oversized cargo. If the arches are planned to be used for transporting heavy, large objects, a reliable, durable fastening is required. To do this, you need holes with stiffening partitions on the roof of a hatchback or station wagon.

When purchasing roof rack partitions, tell the seller your car body type.

Mechanics recommend contacting installers to drill holes and secure the roof rack.

Note: longitudinal partitions are less securely attached to the surface of the car than transverse partitions. Load capacity is lower.

Aesthetic - more for beauty

Used to complement the design, giving the car a sophisticated look. Does not imply strong, reliable fixation. Car owners often use longitudinal bars as a tuning element. For fastening, it is enough to take a sealant or self-adhesive double-sided tape.

Transverse mounting of the roof rack on the priors

a common type of installation of additional space for transporting goods. It attaches easily, quickly and securely. Suitable for those who use personal transport as a cargo taxi. Regardless of the model and body type of the vehicle, the arches are installed along the edges of the roof. You can use two or three crossbars. Fastening to the body surface is done using bolts.

This method is common, not only for domestic vehicles.

The only caveat is that when moving at high speed, a rattling noise appears.

Engine and transmission

The car is equipped with a 1.6-liter 106-horsepower gasoline engine. The power plant has an in-line layout and is equipped with four cylinders. The maximum torque is 148 Nm. Additionally, the power unit is equipped with the option of electronically controlled fuel injection distribution. The 106-horsepower engine is controlled by a five-speed automatic or manual transmission with an identical number of steps. The large trunk volume of the Priora hatchback and a fairly powerful engine allow the car to be used for family trips.

Lada Priora accelerates to hundreds in 12.6 seconds and can reach speeds of up to 183 km/h. Taking into account the relatively small mass, the level of fuel consumption of the vehicle varies between 5.5-8.8 liters for every 100 km of travel.

Specifications

The comfortable suspension design and sufficient trunk volume of the Priora sedan allows the car to be used as a suitable model for regular business trips. In the front there are McPherson struts. The rear suspension has a dependent design.

The Lada Priora, whose ground clearance is 165 mm, has ventilated disc brakes at the front. At the rear, the brake system is drum-type. In general, this has a positive effect on the level of safety during operation. The steering system in entry-level vehicles is equipped with a hydraulic booster. More expensive versions of Priora are distinguished by the presence of an electromechanical power steering. The front part of the car is identical for all modifications of the model; accordingly, the hood on the Lada Priora is installed the same, both on the sedan and on the station wagon.

Source

Problems: what can break

Among the problems that arise when installing bars on the surface of a car, damage to the paint and varnish coating, the formation of dents in the body, and the formation of a gap in the doorway due to the contact of the door with the gaskets where the rails are attached should be noted.

Manufacturers of domestic cars took into account the desire of potential buyers to modify the vehicle and increase the carrying capacity. Therefore, under the paint at the top of the body, special holes are made for installing roof rails.

Source

How to install a roof rack on a Priora

Owners of Lada Priora cars often face the problem of transporting goods, this is due to the fact that the car’s trunk is not as spacious as they would like. This problem is especially relevant for married couples with children. So, for example, if the child is just a toddler, then the back seat is occupied by a safety seat, and the standard trunk is occupied by a baby stroller, which you cannot do without. There is practically nowhere to put the rest of the things. In such situations, the simplest and most reliable way to organize additional space for transporting luggage is a car box (a trunk located on the roof of a car). This trunk today is not something exclusive, as it was before. Nowadays, you can purchase this trunk for almost every model of passenger car, for example, the universal car box https://www.tonna-gruza.ru/shop/thule-touring-600-black-glossy-left of the Touring series. However, some craftsmen equip such a box themselves. This usually involves making guides for attaching the roof rack, and the rack itself is either made by yourself or purchased ready-made in accordance with the selected overall dimensions.

We'll talk about the autobox, which was designed specifically for the Lada Priora car. One of the well-known and reliable manufacturers of luggage racks for VAZ cars is the Atlant company (Russia, St. Petersburg), whose products we need. This trunk consists of aluminum arch guides that can withstand a load of 100 kg, while the trunk is capable of carrying cargo weighing up to 75 kg.

The design of the trunk provides for its fastening to the roof to the doorways and is carried out using special adapters. The load-bearing capacity of the trunk is taken over by special arches made of anodized aluminum, size 20x30 mm with a wall thickness of 2.5 mm. The length of each arc is 1100 mm, at the ends of which there are plastic plugs. Fasteners that contact directly with the car body are made of durable composite material. To prevent unauthorized access, a hidden lock is built into the design of the fasteners. This autobox is designed for the Lada Priora sedan and hatchback model range.

The luggage carrier includes: 1) Mounting system kit for Lada Priora. 2) Set of load-bearing supports. 3) Atlant roll bar set.

As for installing and removing the trunk, it takes 15-20 minutes, and the installation process is intuitive and does not require explanation. However, if difficulties arise, the kit provides detailed step-by-step instructions.

Good day!

I'm going to PURCHASE and then INSTALL a roof rack for a Priora (sedan 2170).

It is advisable, of course, to install the strips, and not the old-fashioned ones

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]