Heated seats on a VAZ 2114 - installation, repair, how much it costs

Hello! Don’t know how to connect the factory heated seats to a VAZ 2113 2114 2115? This article describes the installation and connection of heated front seats!

To connect the heating you will need:

1. Seat heating kit. 2. Four-pin relay: 1 pc. 3. Seat heating button: 2 pcs. 4. Fuse holder: 1pc. 5. 10 or 15A fuse. 6. A few copper wires and various little things for connection: terminals, electrical tape, heat shrink, etc.

I made a diagram and tried to describe everything in detail!

Attention!

It is better to buy the heating separately, without components for installation. (It includes a set of all the wiring.) It will be cheaper, but all the wires will have to be sorted out (It’s possible that I’m the only one who came across such a set, but you will have everything okay), and the wires in the kit are complete nonsense.

The wiring kit is designed for connection according to the standard diagram. I found the diagram on the Internet. Everything fits together.

But in reality it turns out like this:

PS: It’s been a year of regular use after connecting, according to the specified scheme, everything is working fine. There was one point: after about a couple of months, the heating began to turn off spontaneously, it turned out that the four-contact relay had failed, but it was my fault: I installed a used relay, and after replacing it with a new one, everything became good again. Install a new relay!

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]