Panel trim for VAZ 2110, 2111, 2112 old model

Do you value nerve cells? A creaking panel trim on a VAZ 2110 is far from the most pleasant and even annoying sounds that you can involuntarily “enjoy” while driving. And what can we say about the aesthetic side of the issue? The cheap plastic of the product clearly does not emphasize the status of its owner. This also adds to the motorist’s problems associated with the need to maintain the “tidy” and regularly patch new cracks on it.

If the heater in your car constantly works poorly in winter, especially when it comes to heating the side windows, you can also safely point your finger at the instrument panel. This is truly an eternal problem with most VAZ cars. The reasons are very banal, which will be discussed in more detail a little later.

There is no need to change, as they say, for good or bad. AvtoVAZ may not always be attentive to the small structural details of its cars, but all of them can be easily eliminated by the motorists themselves. Therefore, the problem of panel overlay can also be solved quite simply. And how - it depends on you and on which of the ideas below you like best.

Delivery by Russian Post (cash on delivery, no prepayment)

Advantages: the most widespread network in Russia, delivers to any corner of the country, including remote ones. Flaws:

• high cost of delivery of heavy or large parcels, as well as the weight of one parcel should not exceed 20 kg;
• long delivery times and queues in large cities for receipt.

To send your order by Russian Post:

1. Place an order in our online store by phone or on the website (registration is not necessary);
2. After we receive it, our manager will contact you by phone to clarify the cost, delivery time and your wishes. Next, we will pack your order carefully and then send it to you;
3. You will receive the tracking number of the shipment via SMS from us and from the Russian Post; the message will indicate the full cost of the purchase, including delivery to your locality (that is, the cost of your order plus the cost of delivery by cash on delivery). You can control the status of the order coming to you using our tracking service, as well as independently, on the Russian Post website using the track number;
4. To the Post Office, you will only have to pay the cost, including delivery.

Delivery time may vary depending on how far your locality is from Togliatti and usually ranges from 5 to 14 days.

The cost of delivery is calculated based on the volume, weight of the selected product and the distance to the recipient's settlement.

Required for sending:

• indicate full name recipient;
• Your mailing address;
• Your phone number (contact);
• Post office code.

Russian Post commission for cash on delivery service:

• purchase price up to 1,000 rubles. – 70 rubles + 5% of the amount;
• purchase price from 1,000 to 5,000 rubles. – 80 rubles + 4% of the amount;
• purchase price from 5,000 to 20,000 rubles. – 180 rubles + 2% of the amount;
• purchase price from 20,000 to 500,000 rubles. – 280 rubles + 1.5% of the amount.

Russian Post - Delivery of goods up to 20 kg throughout Russia. https://www.pochta.ru

Delivery time and cost Track the parcel Calculate delivery by mail

Installation

The removed panel needs to be disassembled and modified taking into account the purchased cover. The standard trim of the VAZ 2110 is removed, and the instrument panel is installed using the brackets included in the kit on the panel.

The euro trim itself must be cut according to the instructions, and all the accessories supplied with it must be installed, as well as the air duct panels. The wires need to be laid and secured at the base of the panel. The base itself should be glued with bitoplast so that the squeaking does not bother you. It is also necessary to seal the joints of the air ducts with splen and bitoplast.

We carry out actions with the overlay according to the instructions

The existing wiring harness is connected to the additional Euro pad harness. Fastening - using mounting ties. To avoid annoying squeaking in the future, all connectors should be wrapped in bitoplast. After this, the panel overlay is secured with self-tapping screws in the indicated places.

Now you can install the panel on which the overlay is already attached in its place. The most painstaking work is to connect all the devices correctly. Markers should help with this. Be sure to check if you can hear the panel creaking; perhaps additional sizing is needed somewhere.

In general, there is nothing particularly difficult about installing a new trim successfully. The only thing is that this work requires great care, especially in terms of connecting all devices.

Source

Delivery by transport company (cash on delivery, no prepayment)

Advantages:

• the cost of delivery of heavy and large-sized orders is much cheaper than that of Russian Post;
• There are practically no restrictions on the weight and dimensions of cargo;
• There is a wooden crate service - this is an additional guarantee of the integrity of the order.

Disadvantages: unfortunately, there are branches only in cities.

The estimated cost of delivery for an order up to 30 kg is 450 rubles.

List of transport companies with which we cooperate:

• TC "PEK" (cash on delivery service available);
• TC "Business Lines";
• TC "Energia";
• TC "KASHALOT" (KIT) (cash on delivery service available);
• TC "SDEK" (cash on delivery service available);
• TC "DPD";
• TC "ZhelDorExpedition";
• TC "VOZOVOZ";
• TC "Baikal-Service".

To send your order by transport company:

1. Place an order in our online store by phone or on the website (registration is not necessary);
2. After we receive it, our manager will contact you by phone to clarify the cost, delivery time and your wishes. Next, we will pack your order carefully and then send it to you;
3. You will receive a shipment tracking number from us via SMS or email (if available). You can monitor the status of the order coming to you using our tracking service, as well as independently, on the transport company’s website using the track number. After the order reaches your locality and the manager of the transport company contacts you, you need to receive the order at their office or order home delivery;
4. Upon receipt from the transport company, you pay the cost of delivery and order.

The cost of delivery is calculated based on the volume, weight of the selected product and the distance from the city of Tolyatti.

To send an order you must:

• indicate full name recipient;
• Your locality and region;
• series, number of passport or driver's license;
• Your phone number (contact).

TC "Business Lines" - Urgent delivery of goods from 1 kg throughout Russia. The exact cost can be found on the official website of the delivery service - https://www.dellin.ru

Delivery time and cost Track the parcel View the list of branches

TC "PEK" - Guaranteed safety of cargo for the entire duration of cargo transportation, clear information support, delivery of goods throughout almost the entire territory of Russia, Belarus and Kazakhstan in optimal terms and accurately calculated cost of services. The exact cost can be found on the official website of the delivery service https://pecom.ru/ru/calc

Delivery time and cost Track the parcel View the list of branches

TC "SDEK" - Low tariffs compared to foreign courier companies, while the quality of the services provided meets modern international logistics requirements. Developed network of own representative offices. The exact cost can be found on the official website of the delivery service https://www.cdek.ru/calculator.html

Delivery time and cost Track the parcel View the list of branches

TC "ZhelDorExpedition" - Serves only large cities and towns. The exact cost can be found on the official website of the delivery service - https://www.jde.ru/branch

Delivery time and cost Track the parcel View the list of branches

TC "Energia" - Cargo transportation in Russia, CIS and China. The exact cost can be found on the official website of the delivery service https://nrg-tk.ru

Delivery time and cost Track the parcel View the list of branches

TC "KASHALOT" (KIT) - Delivery of cargo from 1 kg to 20 tons throughout Russia and Kazakhstan. The exact cost can be found on the official website of the delivery service https://tk-kit.ru/calculate

Delivery time and cost Track the parcel View the list of branches

TC "Baikal-Service" - Transportation and delivery of consolidated cargo by road across Russia. The exact cost can be found on the official website of the delivery service https://www.baikalsr.ru

Delivery time and cost Track the parcel View the list of branches

TC "DPD" - Transportation and delivery of groupage cargo by road in Russia. The exact cost can be found on the official website of the delivery service https://www.dpd.ru

Delivery time and cost Track the parcel View the list of branches

TC "VOZOVOZ" - Transportation of groupage cargo by regular delivery routes between Russian cities. The exact cost can be found on the official website of the delivery service https://vozovoz.ru

Delivery time and cost Track the parcel View the list of branches

Some tips for updating the instrument (display) panel of the VAZ-2110

If the standard panel overlay on the VAZ 2110 for indicating sensors and meters has already become boring to you, you will probably be pleased to know that replacing this element of the car is extremely simple. This is where you can show your creative talents in artistic and printing skills. If this kind of work is not for you, you can always buy ready-made overlays in the store, or contact a designer.

If you're wondering exactly how to personalize the dashboard trim above your steering wheel, it's relatively easy to do. A template is created in a graphic editor on a computer (CorelDraw, Photoshop or similar) and then printed on self-adhesive film (preferably dark matte color) using a plotter. There are a lot of ready-made templates for the VAZ-2110, as well as modified ones, on the Internet. This is much more profitable than buying ready-made overlays in the store.

Tuning the VAZ dashboard using LED display is also very popular. This kind of lighting practically does not heat the plastic, is durable and consumes minimal electricity. But the overlay will now look extremely stylish and fashionable. You can connect either a stationary backlight, which is turned on with the ignition, or one controlled by a special regulator (you can set the operating mode, brightness and color).

You can make payment in one of the ways convenient for you:

1. To a SberBank or Alfa-Bank card. The most profitable method for the buyer, as well as the most convenient one, is to use the Sberbank Online service, Alfa-Click, an ATM, or through an operator at the bank. After placing your order, the manager will send you the card details. If you do not have a SberBank or Alfa-Bank card, you can also top up your card using the details at any SberBank or Alfa-Bank branch. Payment is credited within an hour.
2. Yandex money. Customers who have Yandex.Wallet can quickly and easily pay for an order in our online store, the commission will be 0%.
3. Yandex.Checkout is an online payment acceptance service. A convenient option with a large selection of payment methods for your order: plastic cards of any banks, including credit cards, in cash through terminals, ATMs or phone shops, Qiwi Wallet, Yandex.Money, WebMoney, from your phone balance, purchase on credit (payment in installments) . Please carefully check which email address you provided during the ordering process, as you will receive a receipt for payment for your order. Yandex.Checkout commission for transfer will range from 3% to 6% .
4. QIWI wallet. If it is more convenient for the client to use a QIWI wallet or, if it is not available, to pay through the nearest QIWI terminal, the manager will provide you with the wallet number. Commission 0%.
5. Payment at any bank using an invoice or receipt (+3% to the cost). If you do not use electronic wallets and plastic cards, we provide the opportunity to make payments at any bank in Russia. The site manager will send you a pre-filled receipt “Form No. PD-4” by e-mail; please carefully check the e-mail address you provide. The bank commission will be approximately 3% and depends on the bank itself
6. Cash on delivery upon delivery by the Transport Company (payment for purchase upon receipt of the order).
7. Cash on delivery upon delivery by Russian Post (payment for purchase upon receipt of the order). The order arrives at the post office, after which you pay its cost and pick it up, in which case the Russian Post charges a commission.

How to maintain an old trim on the instrument panel of a VAZ-2110

The main problem with this kind of product is, of course, low-quality plastic, which tends to crack. An equally serious problem is the peeling of the main parts of the “side”. There are only three of them: upper, lower and middle, respectively. It is at the connecting joints that it often happens that the cracks widen.

Most motorists, at a minimum, seal all heat-conducting channels of the “dashboard”, thanks to which the instrument panel overlay on the VAZ 2110 works much more efficiently. Anti-creaking is also used, since the unpleasant sound of plastic rubbing at the joints puts quite a lot of pressure on the head when driving.

Sound insulation of the VAZ 2110 dashboard

Very often, VAZ drivers have to learn how to repair cracked plastic. There are special means for this. Cracks can also be repaired by cold welding or epoxy resin, but after this procedure it is still necessary to repaint the surface of the restored panel. Nobody forbids also reupholstering the torpedo with leatherette or other finishing material as a good alternative.

Over time, the panel, one way or another, becomes substandard, greatly discrediting the presentability of your VAZ-2110. Patches and gluing cannot be done in unlimited quantities, and this is not a rewarding task. Have you ever thought about the need to replace your “tidy”? Below we will try to explain why you need this.

Stories from our readers

“Fucking basin. "

Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.

Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet. You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, they call it Forex. But when I started delving into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums, studying trading strategies. I tried it on a demo account, then opened a real account. To be honest, I didn’t manage to start earning money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day. I managed to get the car buy after half a year, but in my opinion this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, I have more free time for myself and my family. You’ll laugh, but I work directly on the phone)) If If you want to change your life like me, then here’s what I advise you to do right now: 1. Register on the site 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY! I also advise you to download the application to your phone, it’s much more convenient to work from your phone. Download here.

Source

Alternative

They mainly use the so-called Euro panel overlay.

This trim for the VAZ 2110 is sold as a kit, which includes:

• Actually, the overlay;
• Inserts for finishing on the instrument panel, air ducts, as well as for the button;
• Buttons: heated rear window and rear foglights (these buttons have locks); turning on the dimensions and low beam (dual);
• Two pads for buttons;
• Six plugs that can be placed instead of buttons where they are not needed;
• A set of wires with the help of which the specified double switch is turned on and a block for them;
• Brackets for the instrument panel.

The pad itself is usually softer than that of the VAZ 2110, and does not produce an annoying squeak like the standard one.

Practice shows that proper replacement of such a lining will significantly improve the appearance, sound insulation, and glass blowing.

Beard tuning

The center of the car interior is the console, which is called the beard. It acts as a continuation of the torpedo and attracts the attention of all passengers.

When tuning, you can place in your beard:

• watch;
• radio;
• pocket for small items;
• armrest;
• USB sockets;
• switches;
• backlight

Typically, the beard for “classics” is made from plywood, fiberglass, or from spare parts from foreign cars.

Beard drawings can be found on the Internet or taken measurements from an old console. For the pattern, thick cardboard is used, which holds its shape well. The template is transferred to plywood and, after carefully checking the dimensions, cut out along the contour. Next, the parts are connected with self-tapping screws. The finished frame is covered with leatherette or other material in the color of the upholstery. The material is secured with a furniture stapler and glue.

With panel disassembly

The first stage is carried out according to the plan already described. Next, we proceed like this:

• We assemble the trim, installing our instrument cluster, air duct panels and those accessories included in the kit;
• At the base of the panel we carefully attach the wiring harness;
• We connect the wires from the Euro pad to this harness, tightening everything with mounting ties;
• We connect devices to the required buttons using connectors;
• We secure the cover with self-tapping screws.

This method, although it takes more time, provides high-quality sound insulation to eliminate all annoying squeaks.

We also recommend replacing light bulbs with high-quality analogues or LEDs. So, the updated panel will look even more solid.

Disassembly

Replacing the panel, installing the trim, and do-it-yourself sound insulation require quite a lot of disassembly. Therefore, it is very advisable to mark all removed parts. For example, using self-adhesive labels on goods.

1. Remove the front seats;
2. The floor tunnel is also subject to dismantling;
3. We also remove the steering column cover and the steering wheel itself;
4. The steering column switches also need to be removed;
5. Next we remove the glove compartment;
6. We disconnect the connectors and relays from the mounting block;
7. After removing the front pillar covers, remove the instrument panel of the VAZ 2110, disconnecting everything that is possible from it. If you do not have many devices installed other than those standardly provided, then it is better to remove the panel along with the wires.

Also, in order for the sound insulation to be such not only in name, you need to remove the ECU bracket and sills, and then carefully remove the factory sound insulation.

Tuning the interior of the VAZ 2106

All car owners know that tuning the interior means giving it a new look, improving functionality and safety. With its help you can create an individual and unique style.

Interior tuning consists of several stages:

• torpedo tuning;
• instrument panel tuning;
• beard tuning;
• replacement or reupholstery of seats;
• installation of a radio;
• steering wheel tuning;
• tuning the gear knob.

Let's look at each of these points in more detail.

Installation without completely disassembling the panel

The panel, as many people know, consists of three parts, but the Europanel of the VAZ 2110 is, in fact, only the upper part of the dashboard. And if the goal is only to replace it, without any modifications or other tuning, then you can safely do a partial disassembly without removing all the equipment.

The dismantling process goes like this:

1. Remove the dashboard;
2. Open the glove compartment and unscrew the three screws from the inside. It is quite difficult to unscrew the screw near the windshield, but still doable;
3. Next to the ECU, pull out 4 buttons and unscrew the screws from the inside;
4. We loosen the fastening of the backlight adjustment. You can unscrew it completely, as is more convenient;
5. Having opened the instrument fuse box, we also unscrew 2 screws from the inside;
6. There are still two self-tapping screws that hold the panel trim, but they cannot be unscrewed without complete disassembly. Therefore, either these screws are carefully broken out, or even cut out by lifting the overlay on the right, using a metal file. At the same time, the appearance of the future updated “face” of the interior will not be affected, since the Euro trim will cover these places;
7. Now you can safely remove the cover.

Noise insulation

If you think that installing a panel overlay will immediately solve many problems, then this is not entirely true. We still need to work on eliminating the creaking, for which we need to glue and stretch everything with our own hands; we also need to soundproof the panel itself, and at the same time the floor. It is also possible that the air ducts will need to be replaced or modified.

An article dedicated to tuning and soundproofing a torpedo on a VAZ 2110 is located here: https://vazweb.ru/desyatka/salon/torpeda.html

To work you need, based on a VAZ 2110:

• Six sheets of bimast are a self-adhesive material used for sound insulation. It consists of three layers: 1 – thick aluminum foil; 2 – bitumen; 3 – raw rubber. The standard sheet has a size of 60x90 cm;
• Three sheets of splen measuring 100x125 cm and 0.8 cm thick. This is also a self-adhesive material resembling foam;
• One standard sheet of Bitoplast-5 (black self-adhesive foam rubber).

All these materials will be needed in order to glue all the places that make creaking and other noises, and so that the sound insulation in the VAZ 2110 interior is at the level, and not what it actually is.

In order to know for sure that in the future nothing will creak or rattle on the VAZ 2110, irritating those in the car, normal sound insulation is needed. On the floor of the entire front part (up to the rear seats) and on the front panel with your own hands you need to glue the butt joint in the following sequence: