The Lada Vesta Sport concept, which AVTOVAZ showed at MIAS 2016, has a number of distinctive features. For example, the sports version had a forked muffler, which significantly transformed the car. Did you know that you can install two exhaust pipes on the regular version of the sedan?
CBD muffler made of stainless steel Sports Style (pipe 51 mm) for Lada Vesta
CBD muffler made of stainless steel Sports Style (pipe 51 mm) for Lada Vesta
Material: Steel DX52/DX53 with stainless aluminum-silicon coating AS120
Muffler can size: 0.45*0.18*0.11 m
Main muffler made of stainless steel for Lada Vesta car. Suitable for all Lada Vesta models, except Vesta Sport and Vesta Cross (with modifications)
This muffler is a high-quality analogue from the manufacturer CBD of the original muffler 8450030760, which is also in our assortment.
The muffler itself is the main working part. It is a hermetically sealed (from the external environment) metal chamber with a volume of several liters (the larger the volume, the more effective), inside of which there are numerous partitions with holes, forming chambers arranged in a checkerboard pattern. When gases pass through such a labyrinth, flow pressure pulsations (arising as a result of engine operation) are absorbed and sound waves are dissipated on the developed internal surface with their energy converted into heat.
The sound is significantly louder than the standard exhaust system - pay attention to this when choosing an exhaust system.
The distinctive feature of this muffler is that the muffler has a pipe with a diameter of 51 mm (oversized). Can only be installed together with the resonator CBD220.001
For Vesta Cross, the seat for the original exhaust system tip will need to be welded on site.
When installing an exhaust system with a 51 mm pipe you will need:
CBD exhaust for Lada Vesta on a 51 mm pipe:
Source of the article: https://granves-shop.ru/shop/sistema-vyhlopa/glushitel-cbd-iz-nerzhaveiki-sports-style-truba-51-mm-dlja-lada-vesta.html
What needs to be improved in the exhaust
If the car owner notices the presence of uncharacteristic sounds or vibrations when driving, the corrugation can be replaced. Instead of the standard part, install a longer one, which will provide reliable vibration isolation.
If the driver notices rattling or creaking, the exhaust can be modified using clamps or springs. Opinions of car owners regarding such modifications vary. Some themselves correct the existing shortcomings of AvtoVAZ, others fundamentally turn to the official dealer with a requirement to carry out repair work under warranty.
In terms of finalizing the look, you can use a muffler attachment. It will make the car more beautiful in appearance and its exhaust sound better. The attachment will make Vesta stand out from similar cars. Many Lada Vesta drivers install a new nozzle, since the standard model looks, to put it mildly, modestly. There can be many options. It is best to choose products made from stainless steel with chrome. Chrome plating provides shine that lasts regardless of age.
Nozzles come in various shapes and prices. You can order the part online. Buying a nozzle will cost from 600 rubles to 3500 – 4000 thousand. Each driver can install the nozzle independently. It is enough to put it on the pipe and secure it with screws.
Product range
One of the simple options for increasing engine power is tuning the exhaust system of Vesta and another model. To purchase reliable spare parts for the exhaust system of Lada Vesta, Granta, X Ray cars, contact Vesta Shop. We offer a wide range of products, including:
- replacing the resonator;
- elastic corrugations for mufflers;
- exhaust pipes;
- flanges;
- holders and more.
Products intended for Lada Vesta and X Rey are regularly updated, and therefore you can always find spare parts suitable for your exhaust system.
The use of new elements will increase engine power by 7% without noticeable fuel consumption. The products are resistant to high loads and can be easily installed because they have the required dimensions.
What does the manufacturer say about complaints?
A representative of the famous Russian automobile plant was invited on television to talk about problems with the exhaust system of a new car. The first thing drivers complain about is a loud roar in initial gears, when the engine speed does not even reach 2000. Many are sure that the problem is in the corrugation, which cannot fully absorb vibration vibrations.
A company employee explained that he considers this problem to be individual; it is possible that in one of the cars the muffler is in contact with the body, but no more. He advised the owner to visit the dealer and take advantage of the warranty.
The representative was also asked why the car's exhaust system howls when the engine reaches 3,000 rpm. Because of this, drivers often have to digest the corrugation. And again the answer was an offer to contact the dealership. Such problems should be sorted out by an engineer, and completely free of charge, if there is a guarantee.
If the dealers are unable to solve the problem, or refuse to do so under warranty, the representative asked to inform him about this in a personal message, indicating the address and number of the dealership, as well as the VIN combination of the car.
Buy spare parts for the exhaust system at Vesta Shop
To purchase exhaust parts, add items to your cart and place your order. Afterwards, our manager will contact you and confirm your application. You can receive the products at your address. You can also pick it up yourself in one of our stores, which are located in 16 cities across the country.
For any questions and for a free consultation, please contact the phone number listed on the website or via e-mail.
Source of the article: https://granves-shop.ru/shop/sistema-vyhlopa
CBD Sports Style resonator from 2022 (51 mm pipe) for Lada Vesta
CBD Sports Style resonator from 2022 (51 mm pipe) for Lada Vesta
Material: Steel DX52/DX53 with stainless aluminium-silicon coating AS120
Resonator assembly for a Lada Vesta car with an increased pipe size (51 mm). This resonator kit can only be installed in conjunction with the muffler CBD230.001 . The resonator is equipped with a 3-layer reinforced Wire Mash corrugation, which is of higher quality and has a long service life.
The resonator is intended for installation on the Lada Vesta car from 2022 . If you plan to install this resonator on a car before 2022, then modifications will be required. The main differences between them are in the mounting brackets. You can buy a mounting bracket in our online store and modify the resonator for your car yourself if you have a Lada Vesta until 2022 (on the product page with the bracket there is a video on modifying the exhaust system for Vesta until 2022)
Reasons for failure
- Exhaust system malfunctions;
- Failure of the catalytic converter;
- Worn pillows or loose engine mounts;
- Poor muffler mounting.
The failure of corrugations can be affected by aggressive additives of high-octane gasoline, dirt and chemicals used to treat roads in winter, mechanical impact when hitting an obstacle or impacts of crushed stone from under the wheels of a car.
The bellows is installed on a straight section of the exhaust pipe in front of or behind the catalytic converter, when it fails, excess pressure acts on the walls of the corrugation. And in combination with the high temperature of the exhaust gases, the clutch burns out.
Muffler Lada Vesta Sport Style 51 pipes, main
OEM: 8450030760, 8450006415
Material: Steel DX52/DX53 with stainless aluminium-silicon coating AS120
Features: oval can with filler, direct flow (loud)
- Lada Vesta
- Lada Vesta SW
- Lada Vesta Cross
- Lada Vesta SW Cross
- Lada Vesta CNG
The main muffler - the rear can - is the final part of the exhaust system on a pipe with a diameter of 51 mm. Analogue of the original muffler, catalog numbers 8450030760 and 8450006415.
Suitable for installation on vehicles of the Vesta family, except Vesta Sport, in any body and with any engine and gearbox.
By car until 2022 In the state, the route is made on a Ø 40 mm pipe. The design and size of the standard exhaust are designed for the most comfortable ride. That is, the sound of the exhaust system is as quiet as possible.
Tuning the exhaust system by increasing the diameter of the pipe is designed to produce a louder, more “Sporty” sound, so this muffler is a sporty style.
At the same time, the muffler is not direct-flow. This means that the volume will be higher than the standard sound, but not as loud as on direct-flow sports cars, which does not contradict the noise level according to traffic regulations.
This part is intended for installation only together with the middle part of art. CBD220.001, also made on a 51 mm pipe.
Increasing the diameter of the route will make it easier for the engine to breathe. In fact, in this case this will not affect the car’s power (without additional engine firmware), but when driving it will feel like “the car drove better.”
For Vesta Cross, the seat for the original exhaust system tip will need to be welded on site.
Installation Features:
Lada Vesta manufactured since 2022 has a standard installation.
To install a complete track on Vestas produced before 2022, the following elements will be required:
- Muffler suspension rubber, art. 6001547472 — 4 pcs. (if the old ones break when dismantling the current exhaust system) Two for the middle part (resonator), two for the rear (main muffler) part.
- Main muffler mounting clamp, art. 11180-1203064-00 assembled.
- Gasket for the muffler exhaust pipe flange, art. 21100-1203021-14-0.
- Straight muffler mounting bracket: length - 185 mm, rod Ø 12 mm, mushroom Ø 18 mm, art. KRN005 - 2 pcs. For those who have a muffler suspension on two body extensions.
The presented muffler does not include a nozzle! It will need to be (if desired) purchased separately.
Source of the article: https://dop-shop.com/osnovnoy-glushitel-lada-vesta-sport-stayl-51-truba-cbd/
Not a standard muffler
A double muffler has always been considered a sign of power and greatness. After the manufacturers demonstrated a sports version of the Lada, with a forked exhaust part, many Lada Vesta owners wanted the same. For the Vesta car, a bifurcated mute muffler is recommended. It is made of high quality stainless steel. You can select the volume before purchasing. Ask the seller about the warranty. Original spare parts have a 2-year warranty. It is better to order a forked muffler for Lada Vesta on the Internet. Price 6,500-10,000 rubles. You can install the tuning element yourself, or go to a car repair shop. In addition to the part itself, the kit includes fastening elements.
Middle muffler (resonator) “Sport Style” Vesta (1.6 and 1.8) from 2015- CBD
Product code: 53161
Buy in store
Special price: 5,590 rub.
Availability in stores:
- Sedova st., 13 - 1 pc.
- st. Portovaya, 15-B - 1 pc.
- 1st Verkhny lane, 10 - 1 pc.
- st. Planernaya, 15-B — 1 pc.
Delivery in St. Petersburg
Delivery: tomorrow
Payment: cash, credit card
Order by phone: 8-911-199-89-79
Delivery across Russia
Special price: 5,590 rub.
Delivery: transport companies
Delivery cost: calculated after placing the order
Payment: by transfer to a bank account
Order by phone: 8-911-199-89-79
Manufacturer: CBD / Russia
Model: Lada Vesta
Generation: Lada Vesta
Engine: VAZ-21129 (1.6 16V), VAZ-21179 (1.8 16V), H4M (1.6 16V)
A muffler is a device that reduces noise from a running car engine. The design of the muffler uses noise suppression and flame suppression structures.
Pipe with a diameter of 51 mm. Installed on standard modifications of Lada Vesta. Structurally, the muffler of the Sport modification is the same.
Source of the article: https://stovesta.ru/spareparts/item/3676-glushitel-srednij-sport-style-vesta-1-6-i-1-8-s-2015-cbd
Direct-flow main muffler “StinGer” Vesta 1.6/1.8
Attention!
The signature sound of “ Stinger” mufflers has become more noble thanks to the new manufacturing scheme.
The entire
Stinger exhaust system has a certificate of conformity.
Name:
Direct-flow main muffler “Stinger” Lada Vesta
Applicability:
"Lada Vesta" / Lada Vesta
Purpose: Designed to reduce noise from gases or air escaping into the atmosphere from the engine exhaust manifold. StinGer mufflers make it possible to increase the power of a car engine compared to standard mufflers, because... their design allows exhaust gases to flow with less resistance. In addition, tuning enthusiasts will be interested in the fact that the sound of StinGer mufflers is more pleasant, not loud or ringing.
The production of exhaust systems and their components is one of the main activities of Stinger LLC. “StinGer” mufflers are part of the direct-flow exhaust that we offer you. It has proven itself excellent both in urban conditions and in sports. The “StinGer” exhaust system has become quite popular in Russia, so we offer exhaust systems and their components to wholesale buyers at wholesale prices.
Material:
Steel 08 PS. Pipe coming out from under the bumper: Stainless steel
Filling:
Basalt wool and basalt fabric (heat resistance 1200 degrees C) to prevent the wool from blowing out. During installation, standard clamps are used, the outlet pipe is stainless steel.
How to use springs correctly?
- set of nuts;
- a spring from a classic drum brake, two pieces;
- several clamps.
- Install and secure a pair of clamps at the front and rear of the muffler.
- Pull springs between them on opposite sides. Thus, the corrugation will be tightened.
Both methods cause controversial opinions among car enthusiasts. Some believe that you can effectively get rid of unpleasant sounds on your own. But some owners are still confident that it is better to address the problem to specialists who will carry out the work according to a well-established scheme.
