Tidy from Priora 2 to Priora 1

Life hack: dashboard of a Lada Priora car, everything you need to know

Priora has several panels, depending on the year of manufacture, plus non-standard ones made specifically for it.
Everyone knows how important it is to know the instantaneous status of instruments and machine parameters. The panel, also known as the control panel, on a Lada Priora car is, in fact, brief information about the condition of the car at the moment. It contains all the basic information, from movement speed to indicator readings on malfunctions of the main units and components of the machine. When something in it doesn’t work, it’s immediately alarming, because it’s current information. A description of all the icons and their meaning can be found below in the article. Technology is gradually developing, so the dashboard is becoming more and more technologically advanced. But since the Lada Priora is a low budget car, the panel on it is of the same quality. On the first devices, the backlight often does not light up, or is only half lit. Of course, this does not make the Priora look good. The instrument panel on the Priora car changed with the restyling of the 2nd Lada car. And Lux cars come with navigation. In fact, its basic functionality remains the same - all basic information is visible. Here you can monitor the operation of the engine, monitoring the speed, and understand that it is time to take the car for maintenance when one of the lights comes on. The price of a first (1) and second (2) generation part starts from 6,000 rubles and above. Tidying saves you from speeding, helps you refuel on time and prevent the Priora from boiling.

Product delivery options

Note! Below are the shipping methods available specifically for this product. Payment options may vary depending on the delivery method.

Detailed information can be found on the “Delivery and Payment” page.

Parcel by Russian Post

Available payment methods:

Cash on delivery (payment upon receipt)
Using cards Sberbank, VTB, Post Bank, Tinkoff
Yandex money
QIWI
ROBOKASSA

Shipping throughout Russia. Delivery time is from 5 to 12 days.

Parcel by Russian Post 1st class

Available payment methods:

Cash on delivery (payment upon receipt)
Using cards Sberbank, VTB, Post Bank, Tinkoff
Yandex money
QIWI
ROBOKASSA

Shipping throughout Russia. Delivery time is from 2 to 5 days. More expensive than regular delivery by Russian Post, approximately 50%. Parcel weight up to 2.5 kg

Express Parcel EMS

Available payment methods:

Cash on delivery (payment upon receipt)
Using cards Sberbank, VTB, Post Bank, Tinkoff
Yandex money
QIWI
ROBOKASSA

Shipping throughout Russia. Delivery time is from 3 to 7 days. More expensive than regular delivery by Russian Post, approximately 100%.

Transport companies

Available payment methods:

Using cards Sberbank, VTB, Post Bank, Tinkoff
Yandex money
QIWI
ROBOKASSA

Delivery is possible to any locality where there is a representative office of the transport company. Delivery time is from 2 to 10 days. Sending large parcels is approximately 50% more profitable than by Russian Post.

Courier delivery in Togliatti

Available payment methods:

Cash upon receipt
Using cards Sberbank, VTB, Post Bank, Tinkoff
Yandex money
QIWI
ROBOKASSA

Delivery time from 1 to 12 hours.

Pickup from our warehouse

Available payment methods:

Cash upon receipt
Credit, installments
Using cards Sberbank, VTB, Post Bank, Tinkoff
Yandex money
QIWI
ROBOKASSA

Pickup times must coincide with store opening hours.

Standard instrument panel - article number and price

The original car tidy exists in three types.

the first is an option for a pre-restyling car;
the second panel is for a restyled car;
and the third is the “Lux” option for the restyled one, which has become faintly similar to all previous torpedoes.

Each of them contains standard elements such as a tachometer, so their functionality does not decrease. . Who wants to do tuning of the instrument panel, this option is for them.

Priora first generation

The instrument cluster for the first generation Lada Priora received catalog number 2170-3801010. Cost – about 6,000 rubles. Everything is standard with it - from left to right there are four arc scales with red arrows: odometer, speedometer, coolant temperature, fuel level. Below the speedometer there is a small on-board computer display, and above the arches are all the indicators, including the direction indicators.

Priora 2

For the Priora “Lux” variation there are two more “subtypes” - with or without a CAN bus. Different subtypes were made so that the panel could be connected to any car. Catalog number – 2170-3801010-50 without tire, 2170-3801010-60 with tire. It is distinctive in that it contains an elongated display with a screen that can highlight the navigator.

The catalog number of the combination for the “Norma” assembly is 21720-03801010-20. Cost – 6,500 rubles. Like the “Lux” version, it received a brighter speedometer and odometer, and the coolant temperature along with the fuel level indicator is hidden at the bottom of the speedometer and odometer. The base will not create a route on the display, but will show all the information in color.

When will we see the new Lada Granta

As the AUTOSTAT agency reports with reference to Lada dealers, production of the restyled Granta family is planned to begin this August. Now we will talk about four body types: sedan, liftback, hatchback and station wagon. As a result, the Kalina model will cease to exist.

The so-called “restyling family” of Lada Granta is planned to be presented at the Moscow Motor Show 2018. Also, as the media recalls, at the end of 2015, AvtoVAZ stopped the production of Lada Priora hatchbacks and station wagons, while keeping only the sedan on the assembly line, since approximately 80% of sales were accounted for by this body type.

Icons on the factory dashboard

All indicators should light up like a Christmas tree for three seconds when the engine starts. If some icon remains, it means the system is signaling a breakdown. To make it easier to understand all the indicators, here is a schematic picture:

1,5,9,10 are already known scales that display the main parameters that can change. 19 – on-board computer display. Further:

2 – Icon indicating the operation of the braking system.
3 – Battery condition. If the light remains on, the battery is discharged or the charge level is too low.
4.7 – Doublers for direction indicators (“turn signals”).
6 – Oil level (indicates low level).
8 – Handbrake. Lights yellow when the lever is tightened.
11 – “Gasoline light bulb.” Lights up when there are only 10 liters left.
12 – Button for switching on-board computer modes.
13 – “Emergency”.
14 – Electric power steering (indicates a breakdown).
15 – High beam on.
16 – Side lights/low beam.
17 – Airbag condition (malfunction).
18 – Immobilizer (if you hear a beep and the icon itself blinks, the immobilizer is faulty).
20 – Seat belts not fastened.
21 – Unsatisfactory condition of the service brake system.
22 – Disabling the airbag.
23 – ABS malfunction.
24 – “Check”, “Check Engine” - engine failure.

Will there be a new model instead of the Priora - what are AvtoVAZ’s plans?

Most likely, the company is preparing space for new models, removing outdated and not so logical cars from production. But these are unlikely to be replacements for Priora and Kalina. The problem is that B-class sedans have oversaturated the company’s model range; other segments are needed that AvtoVAZ could cover with its products. For now, specific plans exist only on paper, and they can change a lot. Nevertheless, we can safely declare the following options for the concern’s actions:

the discontinuation of cars that have begun to lose their liquidity in the new car market; over time, this will happen even to Grant, which was recently updated and released a facelift;
proposal of a completely different concept for the development of Lada, as a joint venture with Renault-Nissan, selection of technologies that could be introduced for Russian production;
the creation of 5-6 new models that will not replace the old ones, but will create a completely new image of the manufacturer and make it more profitable in the eyes of customers, will help raise the company’s image;
constant updating of the offered assortment in order to prevent models from becoming obsolete, that is, working on the principle of modern European concerns in their profitable niches;
Gradual addition of the model range and the withdrawal of those models that do not meet sales expectations will help the company remain profitable and interesting for investors.

Such development will ensure not only the growth of AvtoVAZ as a concern, but also the constant emergence of new domestic vehicles. Of course, the key to success in such a model will be the quality of production. Russians are ready to buy a car that may not have the best appearance, but one that is comfortable, durable and of high quality. So far, the budget segment does not offer many such options, and on this wave Lada can become a favorite national manufacturer.

We suggest you look at the last review of Lada Priora:

Possible faults

The instrument cluster does not always tell the truth, and sometimes its readings can mislead the driver - they may seem absurd. For each common malfunction, a brief commentary will be given on the possibility of eliminating them:

The fault lamp does not light up (check the lamp);
the lamp is on - check the sensor, reset the error via the diagnostic connector.

If none of the above measures help resolve the problem, carefully inspect the wiring - damage to it may cause the light bulb to activate or deactivate.

Let's sum it up

Modern cars are not the privilege of the AvtoVAZ concern, at least until today. But the company is striving to change its status and gain greater recognition in its state and beyond. Today, buying a new Lada is no longer as unusual as it used to be. The company began promoting its new models, which turned out to be of quite high quality, durable, and interesting in appearance. The cars have a good character, which allows them to take first place in sales in their class without much difficulty.

Despite the fact that many buyers are dissatisfied with Lada's pricing policy, the concern continues to develop and maintain a leading position in sales in certain segments. Today, the manufacturer’s products are even supplied to Central European countries and are beginning their promotion in this difficult market. But Lada Priora will no longer be a participant in this banquet. Most likely, the company is minimizing its model range in order to expand it into new segments and create more constructive competition in the market. What do you think about the removal of one of the most popular VAZ models from the assembly line?

Pinout of the instrument panel of a Priora car

The panel pinout looks quite complicated, but there is a more simplified diagram that will help you figure out the wires connected inside:

EUR
"emergency light"
Engine oil
Handbrake
Immobilizer
Airbags
Headlights and dimensions
Right turn signal
Left turn signal
Electronic control unit
Pad wear sensor
Seat belts (closing sensor)
ABS
Reset button
Brake system, brake fluid
ABS
High beam headlights
Torpedo shield lighting
"Weight"
Thirtieth terminal
Fifteenth terminal
Fuel consumption
Forward key
Back key
Ambient temperature sensor (minus)
Ambient temperature sensor (plus)
Fuel level
Speed sensors
Coolant temperature
Odometer
Diagnostics of the shield (service)
Generator regulator

Engine

Car owners seeking to improve their car do not limit themselves to modifying the appearance. Installing additional accessories and replacing parts with more expensive, high-quality ones will allow you to modernize your technical capabilities. In order to refine the engine, the following activities are carried out:

replace the engine mounts on the VAZ;
change some accessories: camshaft, flywheel, standard pistons;
reinstall the electronic unit software;
install an automatic heater;
replace the carburetor pump along with the jets;
clean all channels;
Use sandpaper to clean the carburetor from different sides.

How to enable self-diagnosis of the instrument panel

Using the panel you can “dig into the brains” of the Priora:

Hold the button under the fuel gauge and turn on the ignition. The display should indicate the start of the test.
Press the button again. The display should show the operating system version.
Click again. The system should show error codes:

(2) – High voltage level;
(3) – DT malfunction;
(4) – DTOZH malfunction;
(5) – DTV malfunction;
(6) – Motor overheating;
(7) – Low oil level;
(8) – Malfunction of the brake system;
(9) – Battery discharge;
E – Brain error, EEPROM.

If necessary, reset the error: hold the button for three seconds.
Release the button. Click again. All indicators should light up.
Leave all the buttons. After 30 seconds, the self-test will automatically complete.

Online store of VAZ and Lada spare parts NVS-Car

You can order spare parts for VAZ (Lada) for all parts of the car:

engine and brake system;
transmissions and suspensions;
electronics and exhaust system;
fuel system and wheelbase;
optics and glass.

You can buy these and other components, as well as body parts, tuning elements, auto chemicals, mats and other little things in one place, thereby saving time on searching and ordering the right product. Whoever you are - a private motorist, the owner of a car service or tire shop, a tuning specialist - you can always count on us! We guarantee high quality products, secured by guarantees, as well as prompt processing of your orders.

Required

The Itelma instrument panel with navigation can be of two types (externally they are no different):

2170-3801010-50 without CAN bus;
2170-3801010-60 from CAN bus.

They are not interchangeable, so before purchasing, you should determine whether your vehicle uses a CAN bus or not.

until 06.2012, cars were produced without a CAN bus;
remove the instrument cluster and look at the article number or at the block with wires (see pinout of connectors below).

For Kalina (VAZ 1117, 1118, 1119) - all cars without a CAN bus.

Right steering column switch with joystick (catalog number: 1118-3709340-20);
Antenna (for roof installation): 1118-7903074.

You can also buy ready-made kits (device + antenna + switch):

for Lada Priora - 2170-3801010-55;
for Lada Kalina 1 - 1118-3801010-55.

What to do if the glove compartment rattles

For a used Lada Priora car, the issue of eliminating crickets becomes urgent - since the fasteners become loose, unnecessary sounds appear excessively often. The glove compartment on a Priora can become one of the causes of discomfort, because it will make “squeaking” sounds that you want to get rid of.

Noise sources may include the following:

Metal axes holding the lid. They fit tightly to the plastic, which is why they make a nasty sound. You can eliminate the problem in this way: the axles can be covered with electrical tape, and the plastic cells can be filled with bioplastic, which will soften the manifestation of the friction force.
Separately, it is worth mentioning that if the axles make squeaks near the mounting points, you can use electrical tape, or solve the problem radically, using glue.
Top part with metal fastenings. Pasting with an anti-creaking material will help - the same madeleine will do.
The inside of the drawer lid may also squeak. It will be enough to cover its inner surface with anti-squeak to solve the problem.

Covering with carpet

To cover the inside of the lid with a carpet that will prevent squeaking, first of all, you need to remove the plastic part according to the instructions. Attaching the carpet by reaching inside with your hands will be inconvenient, and you may miss an important section or even glue it crookedly.

For installation you will need a carpet (1 m by 1 m in size) and regular plastic glue. The size of the piece of carpet is determined by the fact that first you will have to make a “pattern” to cover the entire inside of the lid, and then close the “sides” so that the lid looks organic.

The mechanism of operation is simple: when the pattern is ready, cover the glove box lid with glue and place the carpet to size. Without it, only the fasteners (arc-shaped slide) and the lock should remain.

Life hack: upholstery of the glove compartment on a Priora – tools – material, instructions

For owners of 2170 there is a pre-prepared kit. No need to measure or cut anything. KozhDesignAvto LLC, which is located in Tolyatti, produces a kit with ready-made carpet parts. The back is covered with wide strips of double-sided tape, so no tools are needed.

The manufacturer recommends gluing at a temperature of 15°C with average humidity. In order for the cover to fit correctly on the box lid, you should dismantle it, first applying the carpet to check the edges.

Installation

Replacing the old instrument panel without CAN with a dashboard with navigation without CAN (2170-3801010-50) is carried out without modifications. We remove the old panel and install a new one in its place, insert the connector with wires, connect the antenna (we fix it on the roof) and, if necessary, change the right steering column switch.

If the old instrument cluster without navigation, but with CAN, and instead of it it is planned to install a new dashboard with navigation with CAN (2170-3801010-60), then you need to rearrange contacts 10-11 to 28-29 (if after connecting it still does not work, change 28 and 29 places). See instrument cluster pinout.

After installing the new instrument panel, the mileage will be reset to zero.

Navigation in the instrument panel runs on Windows CE 6.0 along with Navitel software. It is possible to update the software and download navigation maps from a USB card via a special USB input. Operating the car will become much more pleasant, the only drawback is the high price.

Characteristics

There is a hole for the on-board computer on this panel

I bought this kit. The quality is normal. But there are several pitfalls that sellers are silent about. If you replace the old panel from the Priora with a new one, then there will be a little less problems, if you install it on the tenth family, then everything is sad. The kit does not include the following parts, which are not available in retail sales at all. 1. Air ducts (left, right) 2. Glove box lid lock latch 3. Glove box lid axle. In addition to this, the panel does not fit into the old style floor tunnel. There is a new sample for sale. But only its upper part, which also does not fit with the old lower part. But the lower part is not on sale anywhere, nor is the tunnel lining bracket.

Required

The Itelma instrument panel with navigation can be of two types (externally they are no different):

2170-3801010-50 without CAN bus;
2170-3801010-60 from CAN bus.

They are not interchangeable, so before purchasing, you should determine whether your vehicle uses a CAN bus or not.

until 06.2012, cars were produced without a CAN bus;
remove the instrument cluster and look at the article number or at the block with wires (see pinout of connectors below).

For Kalina (VAZ 1117, 1118, 1119) - all cars without a CAN bus.

Right steering column switch with joystick (catalog number: 1118-3709340-20);
Antenna (for roof installation): 1118-7903074.

You can also buy ready-made kits (device + antenna + switch):

for Lada Priora - 2170-3801010-55;
for Lada Kalina 1 - 1118-3801010-55.

Body plastic

Body elements can be replaced. Replacing some components and adding accessories will turn the AvtoVAZ model into a normal car. Replacing the rear bumper on a VAZ will refresh and update the design. Replacing the front bumper will affect the performance and improve the power qualities of the engine. In addition, the following accessories are used for decorative purposes: spoilers, plastic, chrome trims. Stainless steel thresholds are installed to protect against dirt and damage. Changing the radiator grille to different shapes radically transforms the front view. A radiator grille in the form of a saber, in the form of a honeycomb, or stripes - any of these accessories will elegantly complement the design. Replacing the mirrors with the new se model will please the eye and expand the side view.

Modernizing the design and interior space, adding modern accessories increases the level of comfort, transforms the car, and improves technical characteristics.

Step-by-step instruction

1. Set the steering wheel to the lower position.

2. Next we need to remove the instrument panel trim. It is secured with four Phillips screws.

Unscrew the 2 screws on top.

In order to get to the lower mounting screws, you need to remove the plastic from the bottom of the steering wheel.

To remove, turn the three latches counterclockwise half a turn.

After turning the clamps from above, pry up the plastic with your hand and remove it.

3. Unscrew the 2 lower screws securing the instrument panel trim.

4. Using both hands, remove the cover. Let's start from the top.

Be careful not to break the latches.

5. Unscrew the 2 screws securing the dashboard using a Phillips screwdriver.

6. After unscrewing the screws, pull the dashboard slightly towards you.

7. Next you need to remove the connector that goes to the dashboard. The connector comes with a clever lock.

Press the latch in the indicated place below with a flat-head screwdriver.

After pressing, use a screwdriver to move the lock back. There is a boss on the latch that a screwdriver hooks onto and you can pull the latch back.