Lada Priora is a very popular car, and it’s not for nothing that it was produced in Russia for about 10 years. And when a lot of machines are produced, then there are many modifications, and there may be several suppliers of attachments, which leads to differences in design. This explains why cabin filter for Lada Priora is a part that has three versions:
- Cabin filter for Priora with Halla air conditioning;
- Cabin filter on a Priora with Panasonic air conditioning;
- Cabin filter if “Priora” without air conditioning.
All three versions of the part have different designs and dimensions. Also, filters for cars with and without air conditioning differ in their installation location. And in the dealer network for the secondary market, not only regular versions of the original filters are available, but also carbon ones. From the factory, of course, they are standard. So what kind of cabin filter do you have on your Priora? Let's figure it out.
When is it necessary to change the cabin filter?
It is possible that you can drive normally even for a couple of years without having to change the cabin filter. But in 95% of cases you have to do this much more often. The fact is that the air that enters the Priora’s cabin passes through the filtration system. And when it becomes clogged over time, it negatively affects its proper functioning.
As a result, the first problems may appear, which will be the reasons and reasons for changing the cabin filter:
- Unpleasant smell when turning on the heater (obvious lack of fresh air intake from outside).
- Constant fogging of windows. It also happens due to the fact that outside air simply does not enter the cabin in sufficient quantities.
- Weak airflow and air flow from the ventilation and heater nozzles. I think there is no point in explaining this point, everything is clear as it is
If at least one of the problems appears on your car, then the first thing you should pay attention to is the cabin filter.
When to change
The cabin filter is an integral part of the car's interior heater. Therefore, it is recommended not to delay replacing it. Neglecting a change can be disastrous both for the car’s heater radiator and for your health.
The manufacturer recommends replacement every 10,000 km. Or before the change of seasons. A clogged filter will have poor air flow, which will affect the air flow coming out of your car's air ducts. In winter this can result in a lack of heat in the cabin, and in summer it can result in a lack of air conditioning cooling.
Where is the cabin filter located?
For vehicles with air conditioning, the cabin filter 2170 has the following location - directly in the heater housing in its front part.
If the equipment is normal, normal or standard, then the heater has an old design, no different from the tenth family. The filter element will be located in the upper left part of the stove body. Its location will be shown below after dismantling all the parts under which it is located:
How often does it need to replace the cabin filter on a Lada Priora?
It is recommended to change the cabin filter in the summer, when it is most susceptible to contamination. The automaker also recommends replacement every 15-20 thousand km. mileage - it is believed that it is during this period of time that the filter works most efficiently, after which its efficiency decreases, and dust and contaminants begin to enter the cabin. External signs of the need to replace the cabin filter are: the appearance of an unpleasant odor in the car interior, fogging of the windows, unstable/inefficient operation of the stove, a noticeable increase in air humidity in the cabin.
Replacing the cabin filter on Lada Priora
Note that the procedure for replacing the cabin filter on a Priora differs depending on the presence/absence of air conditioning in the car. Some also differ between Panasonic and Halla climate systems? However, the replacement process itself in both systems follows the same principle. The differences are only in the type of fastening of the element plug - with self-tapping screws in Panasonic systems and with a latch in Halla systems.
Replacing the cabin filter on a Lada Priora with air conditioning
To perform the procedure, you need to have with you a Phillips screwdriver, a rag, a new cabin filter and a few minutes of time.
- The cabin filter on Priora is located behind the engine. To gain access to its location, you need to unscrew the bolts that secure the soundproofing of the compartment. If necessary, you can disconnect the vacuum booster pipe.
- Unscrew the cabin filter cover latch using a Phillips screwdriver if the car is equipped with a Panasonic climate system or tighten the filter latch if a Halla system is used.
- Pull the used filter towards you and remove the element from the compartment.
- Get a new filter. In order for the element to fit into the narrow compartment between the engine and the upholstery, roll the part as shown in the photo below.
- Install the new filter element into the compartment and close the lid.
Replacing the cabin filter on a Lada Priora without air conditioning
- Open the hood and unscrew the grille located on the passenger side.
- The previous action should open access to the cleaning system mounting compartment. Unscrew the three bolts that secure it and remove the cover.
- Remove the used filter element. Clean the compartment thoroughly from dust and dirt, it is better to use a vacuum cleaner.
- “Place” the new filter into the socket and reassemble everything in reverse order.
Replacing the cabin filter on a Priora without air conditioning: detailed instructions with photos
Even a beginner can change the cabin filter on a Priora without air conditioning. To do this, you need to arm yourself with a minimum set of tools and get down to business. To do this, perform the following manipulations:
- Open the hood of the car and remove the three decorative frill plugs on the right passenger side.
- Unscrew the three screws securing the frill using a Phillips screwdriver.
- Remove part of the rubber seal and move it to the side, as shown in the photo below. Unscrew the three screws securing the frill, which are located on the side of the engine compartment.
- Unscrew the three top screws securing the frill.
- Remove the frill.
- Unscrew the 4 screws securing the plastic grille (their locations are circled in red) to get to the cabin filter.
- After this, remove the old filter.
- Install a new one in its place.
Assembly is performed in reverse order. This completes the procedure for replacing the cabin filter on a Priora without air conditioning, and expert instructions will help you do everything without errors and significant time expenditure.
This is interesting! Clean the channel before installing a new filter if dirt gets inside.
Do not allow the product to skew when installing it, as is the case in the photo above. This setting is incorrect.
Replacing the cabin filter with air conditioning
As mentioned above, the element is installed in the front part of the housing, and in order to get to it, you first need to unscrew the two screws securing the section of insulation, under which the filter cover is located.
The top photo already shows the moment when the filter cover is removed, and it is also attached with self-tapping screws. It is necessary to unscrew them and remove the plug, the result of which is shown in the photo below:
After which you can remove the old element by bending it as shown below.
It is worth noting that this instruction given above specifically shows an example of replacement with the Panasonic climate system. If you have Halla, then the only difference will be in the fixation of the cover under which the cabin filter is located. At Halla it is attached with a latch, which is more convenient and practical.
The new filter is installed in the reverse order of removal. For greater ease of installation, the new element has special slots along the edges so that it can be slightly bent. This is something to pay attention to.
We put the plug in place and fix the insulation in place with screws. Well, below we will consider an example with a regular Priora, which does not have a climate system.
Where is the cabin filter located on the Priora (with and without air conditioning): product numbers
The cabin air purifier on Priora cars is located on the right passenger side under the plastic air ducts (jabot). Priora cars without an air conditioning system (without air conditioning) have this arrangement of the air purifier. The photo below shows the place where the cabin filter is located on a Priora without air conditioning.
If the Priora has air conditioning, then the location of the cabin filter is different. It is located in the engine compartment next to the frill. Its location is shown below.
Knowing the location of these elements, it will not be difficult to replace them. You must first purchase a new product. To avoid making a mistake in your choice, you should order products by catalog numbers:
- For Priora without air conditioning, the cabin filter has part numbers 21110-8122020-00/21110-8122020-82(regular)/21110-8122021-83(coal).
- For Priora with Panasonic air conditioning - 2170-8122020-01.
- For Priora with Halla air conditioning, the article number for the interior cleaner is - 2170-8122020-11.
You can find out what brand of air conditioning system is installed on a Priora car using the console control panel (this is the easiest way). Panasonic air conditioners use a panel on which the central control washer is marked with upward arrows (airflow direction). On Halla brand air conditioners there is no such designation on the central washer of the control panel (see photo).
It is important to know what brand of air conditioner is installed on your Priora, since for different systems the products differ in the mounting method and standard sizes.
The following manufacturers produce cabin filters for Priora cars:
:
- Fortech;
- LADA - original;
- TSN;
- LUXE;
- Polistone;
- BIG Filter.
This is interesting! The cost of a regular cabin filter on a Priora is 200-250 rubles (a carbon filter costs 50-100 rubles more).
Why make a replacement?
Replacing the cabin filter is a necessary procedure. It is best done in the spring, at the beginning of the dust season. The device can last up to twenty thousand kilometers. After this, its functionality ceases.
When the service life of the equipment expires, all the dirt will get inside, since the cabin filter on the Priora will not be able to prevent pollution. It will be difficult for you to breathe such air.
Where is the part located?
Before you change the cabin filter, you need to know its location. It is installed above the windshield, next to the engine block. The device is in a vertical position. To get to it, remove the seal on the hood.
The location of the filter does not depend on the presence of an air conditioner.
When is it necessary to replace?
The cabin filter of the Lada Priora must be changed after a run of ten thousand kilometers, if you follow the official documentation from the manufacturer. In this case, the vehicle must be used under normal conditions. If you drive on dirty roads and city highways, it is recommended to replace them every five kilometers.
Replacing the cabin filter on a Priora without air conditioning
The design of the heater itself is no different in this case from the VAZ 2110. But before getting to the filter, you will need to remove at least the right part of the frill - the windshield lining, by unscrewing the upper fastening screws using a Phillips screwdriver:
You also need to unscrew the screws securing the insulation from the side, as shown in the photo below.
Next, folding the hood sealing rubber to the side, remove the right side of the Priora frill.
There is also an internal part underneath that needs to be removed:
Well, now we unscrew several screws securing the cabin filter grille.
Then we take it out, putting it aside.
And nothing else prevents us from replacing the old cabin filter with a new one. It must be pulled out carefully so that excess debris does not fly into the heating system.
If dust, dirt or other substances get inside, you must thoroughly blow everything off and wipe it with a rag or napkin.
Now you can install a new cabin filter element in its seat in the heater housing. The arrows on the body indicate the direction and correct installation of this filter. As you can see, changing this consumable on a Priora is quite simple and this repair will not pose any problems.
Video instructions for replacement
This review was made using the example of Priora in the standard configuration, respectively, without air conditioning:
How to change the cabin filter of Lada Priora
You can replace the cabin filter with two screwdrivers: one to unscrew and tighten the screws, the other to help pry individual parts off the edges. Replacement depends on the configuration and design of the heater, and installation is carried out in the reverse order.
The installation site, housing, filter cover, cover fastenings, latches should be thoroughly washed during assembly and disassembly, because they are all dust collectors - everything that passes through them along with the air remains not only on the filter element, but also on the plastic parts.
The operation will not take much time, so carefully watch the screw that secures the filter cover so as not to lose it.
Replacing the filter
Below are detailed instructions for replacing the cabin filter on a Priora. There is nothing difficult about this process. This can be done by a person who has no skills in car repair.
With air conditioning
Cars with air conditioning must first be secured in place to prevent the car from rolling anywhere. It is not necessary to remove the minus from the battery, although this is prescribed by AvtoVAZ as preparatory procedures before repairs. Do the following:
- Unscrew the two screws securing the insulation. Additionally, unscrew the clamps or pull the hoses in the other direction using an elastic band so that they do not interfere.
- Unscrew the filter cover screws and carefully remove it along with the screws.
- Take out the filter element - it bends in some parts.
The replacement work in cars with Halla air conditioning differs from those that work on Panasonic cleaners in the way the cover is secured. The Halla system means that the plastic cover is secured with a latch. The new filter element that you install in place of the old one can also be bent in the designated areas.
Without air conditioning
Working with Priora without air conditioning is carried out as follows:
- Remove the plugs on the frill and unscrew the screws. Under the frill you will see screws securing the insulation - they also need to be unscrewed.
- Slowly pull out the rubber seal of the hood and take out the right side of the frill - but it will be more convenient, of course, to take it out completely.
- Remove the inner plastic part of the part.
- In front of you is a cabin filter grille, which is attached with screws - they need to be twisted.
- Remove the cover, under it you will see a cleaning element lying horizontally. You will have to be careful with it: remove it smoothly so that dust does not fall into the heating system. If dust does get in, blow out and wipe the stove.
Original codes for Priora cabin filters
The original cabin filters for Lada Priora are as follows:
- 21110-8122020-00 - without air conditioning;
- 2170-8122020-01 — with Panasonic air conditioning;
- 2170-8122020-11 - with Halla air conditioner.
But, there is a nuance. You will not buy filters with such codes. Nowhere. Even in the dealer network, in the original packaging. They are supplied exclusively from the assembly line. This is confirmed by the fact that neither zzap.ru nor exist.ru have filters with such codes for sale. These are OE numbers, which are used to cross and select analogues on other sites. And that's the only thing you can do with them.
What numbers are available for the “original” Priora cabin filter? The article numbers for purchase in the dealer network or from auto parts sellers are as follows:
- 2170-8122020-82 - regular filter;
- 2170-8122020-83 - carbon filter.
2170-8122020-82
2170-8122020-83
Only AvtoVAZ can tell you how three filters of different design in the original packaging can have the same code. And that’s not a fact. Perhaps, when buying an original filter, you just need to tell the seller what kind of car you have - with or without air conditioning, and what version.
Even the packaging of the filters confirms our words. Three links Link 1, Link 2, Link 3 - original filters for two versions with different air conditioners and a version without air conditioning. All in the characteristics refer to the same original number 2170-8122020-82, all have the same packaging (it is generally the same for both regular and carbon versions), and two of the three filters even in the photo show the same article number on the side .
We also note that it is better to look for analogue filters using the “factory” OE codes - then the selection is much more accurate, you just need to pay attention to whether the filter is regular or carbon. Because when selecting 2170-8122020-82 and 2170-8122020-83, the results are inconsistent. Most often, versions are offered for cars with Panasonic air conditioning, then, based on the number of search results, there are filters for cars without air conditioning, and only then - with Hella air conditioning. Perhaps this demonstrates which cars are most abundant in Russia.
Where is the cabin filter on the Priora?
Let's determine where the cabin filter is located on the Priora and how to determine what kind of air conditioning system you have if you don’t know it and have no one to ask?
In all versions of the car, the cabin filter is located on the right side of the engine compartment , in the part near the windshield . Important! The right side is if you count in the direction of travel of the car. If you are facing the open hood, the air duct system will be on the left.
In the version without air conditioning, the filter can be seen immediately - it is hidden behind the grille. To see and unscrew the grille fasteners, you need to remove the rubber seal.
You won’t just see the cabin filter of a Priora with air conditioning, because its cover is hidden behind the sound insulation of the hood. By removing it, you will gain access to the filter.
Placement of the cabin filter in a Priora without air conditioning
Location of the cabin filter in a Priora with air conditioning
By the way, the cover is a clear distinguishing feature by which you can understand what kind of air conditioning system you have. Not even by the cover itself, but by the type of its fastening. For Halla systems it is attached with a latch, and for Panasonic systems it is attached with a screw. There are no exceptions! Read our detailed instructions on how to change the cabin filter on a Priora.
To close the topic of maintenance, let’s add that the manufacturer recommends changing the cabin filter every or after 10,000 kilometers. Everyone decides for themselves when to change the cabin filter or not and how important it is for them to breathe clean air by installing a regular or carbon filter element. If you change this part as necessary, then remember that severe fogging of the windows can be one of the clear signs of a clogged cabin filter. This is confirmed by the owners of Prior.
Cabin filter on Priora without air conditioning
The cabin filter for this Priora has the following dimensions: height - 40 mm, length - 240 mm, width - 180 mm. Dimensions of analogues may vary. And to fit them, a strip of foam rubber is often glued around the perimeter, which improves the efficiency of the stove.
The filter has a cardboard frame with foam clips and folds of filter material inside. Also, comparing the original and analogues, you will notice that the original has a fixing tape in the middle, which should prevent the filter folds from creasing. Most analogues do not have it! On the other hand, analogues often use a larger number of folds, which, with the same quality of filter paper, should give a better effect.
Owners of “Prior” without air conditioning note that often original and analog filters simply dangle in the seat. Therefore, many handicraft filters are modified with foam seals. It is also recommended to glue a mesh onto the air duct grille to prevent large fractions of contaminants from entering the system. And judging by the reviews, the filter from the manufacturer “Filter-Service” (article VF011N) fits tightly into the seat.
What other analogues are there for the original filter on a Priora without air conditioning and how much does the original cost? The answer is in the table.
| Brand | vendor code | Price, rub |
| Regular filter | ||
| Original | 21110-8122020-00 / 2170-8122020-82 | 225 |
| Nevsky filter | NF-6002 | 120 |
| Filter-Service | VF011N | 230 |
| Coal | ||
| Original | 21110-8122020-00 / 2170-8122020-83 | 355 |
| BIG-Filter | GB-9833/C | 230 |
| Filter-Service | VF011U | 455 |
Cabin filter on a Priora with Panasonic air conditioning
The cabin filter for this version of the Priora has the following dimensions: height - 40 mm, length - 240 mm, width - 210 mm. Dimensions of analogues may vary slightly.
Structurally, it is similar to the filter for the version without air conditioning - it also has a cardboard body and is covered with foam rubber all around. But a distinctive feature of this particular filter for the Priora is the presence on one side of an additional and clearly visible protrusion made of foam rubber.
Considering that the part is not symmetrical, the question arises - which side to install the cabin filter on the Priora. To do this, you don’t need to remember anything - always focus on the arrows that are printed on each filter. They either indicate the direction of air flow or indicate the direction of installation!
What analogues of the original filter on a Priora with Panasonic air conditioning do car owners use and how much does the original cost? See the answer in the table.
| Brand | vendor code | Price, rub |
| Regular filter | ||
| Original | 21110-8122020-01 / 2170-8122020-82 | 230 |
| Nevsky filter | NF-6007 | 175 |
| BIG-Filter | GB9957 | 195 |
| Coal | ||
| Original | 21110-8122020-01 / 2170-8122020-83 | 315 |
| Pilenga | FA-P 4021 | 265 |
| BIG-Filter | GB-9957/C | 300 |
Cabin filter on Priora with Halla air conditioner
The cabin filter for this version of the Priora has the following dimensions: height - 20 mm, length - 370 mm, width - 220 mm. Dimensions of analogues may vary slightly.
The filter for this version has foam inserts only on two sides, and is generally thinner. On one side it has a special tongue for easy dismantling. By the way, according to the experience of car owners, if the replacement is untimely, this tail of a worn and clogged filter comes off, and then it is much more difficult to get it!
What analogues of the original filter on a Priora with Halla air conditioning do car owners use and how much does the original cost? The answer is in the table.
| Brand | vendor code | Price, rub |
| Regular filter | ||
| Original | 21110-8122020-11 / 2170-8122020-82 | 220 |
| Nevsky filter | NF-6008 | 135 |
| BIG Filter | GB-9977 | 210 |
| Coal | ||
| Original | 21110-8122020-11 / 2170-8122020-83 | 280 |
| BIG Filter | GB-9977/C | 275 |
| Nevsky filter | NF-6008C | 230 |
What functions does the device perform?
Actually, the answer to this question is known without any additional explanation. However, it is only worth noting that this element protects not only from dust and carcinogenic substances resulting from car exhaust, but also from the smell of windshield washer fluid. The so-called “anti-freeze” is composed of various chemicals, the inhalation of which can cause headaches. Constant inhalation of such substances can cause serious respiratory diseases.
The cabin filter on the Priora is designed not only to clean the air entering the cabin, but also to eliminate the possibility of clogging the air ducts, heater and air conditioner (if equipped) with various contaminants in the form of leaves, insects, dust, etc. A clogged cabin filter on a Priora negatively affects the operation of the heater fan drive, since a heavily contaminated element does not allow air to pass through, resulting in increased air resistance and accelerated wear of the electric drive.
If you are careless about your health, then you should think about the safety of passengers. And if you nevertheless neglect the rules of the need to regularly replace the cabin filter, then the heater drive may eventually fail, the replacement of which will require significant financial costs.
Which cabin filter is best for Priora?
Which cabin filter for Priora should you buy? The question is rhetorical. Some people prefer the original, others are looking for more affordable analogues. Judging by the reviews of car owners, in versions without air conditioning, the best part is from “Filter-Service”. In other versions, this manufacturer is also popular. As well as spare parts from BIG-Filter and Nevsky Filter. Moreover, the latter are packed in the original packaging.
Also remember that popular spare parts are often counterfeited. Therefore, when buying a cabin filter on a Priora, the price can be one of the indicators. Too low a price is a reason to think and suspect something is wrong. So it is better to buy from reliable suppliers.
Types of salon cleaners
Before replacing the cabin filter on a Priora, it is recommended to understand the types of products. They come in the following types:
- Conventional - these are the devices that are installed on Priora cars from the factory. Compressed paper and synthetic fabric are used as a filter element. Such products trap small impurities in the air, dust and large substances. These are the cheapest product options that are used by 80% of car owners. They are white in color and as soon as they turn gray or black they need to be replaced.
- Carbon - such purifiers are impregnated with activated carbon, due to which they have the property of not only trapping various particles, but also filtering air. Coal acts as an absorbent, trapping harmful substances in the air. Such products are not much more expensive than conventional ones, but at the same time they guarantee effective air purification.
- Carbon filters with polyphenol coating - such filters have the property of neutralizing allergens. On one side, the cleaning element is coated with activated carbon, and on the other, with polyphenol impregnation. It is recommended to use if the driver is allergic to any substances that can enter the car interior with the air.
There are more modern cleaners, but conventional and carbon products are available for Priora cars.
How often to change the cabin filter on a car: signs of the need for replacement
The optimal frequency for replacing the cabin filter is once a year or every 20-30 thousand kilometers. However, few people control the frequency of replacement, and sometimes it happens that after a year the filter element will have minor blockages. In winter, the purifier does not clog as quickly as in summer, so the seasonality of vehicle operation plays a decisive role.
Typical signs of the need to replace the cabin filter on a Priora are the following:
- Unpleasant odor coming from air deflectors. If you do not change the cabin filter for a long time (more than 2 years), then instead of performing its main function, it will cause an unpleasant odor from accumulated clogs.
- Dust from air ducts - if dust enters the cabin from the ventilation ducts when the heater or air conditioning system is turned on, then this is a characteristic sign of the need to replace the filter. If you use a regular cleaner that is not promptly replaced after a year of use, then you risk developing serious diseases. Mold and pathogenic bacteria may appear on the filter element, which will certainly enter the cabin, and then into your respiratory system.
- Problems with the heating and air conditioning system. A clogged purifier leads to an increase in air suction resistance, which will certainly affect the operation of the fan electric drive. It is not worth risking the health of your heating and air conditioning system, since repairing them or replacing parts will cost much more than the annual cost of purchasing a cleaning product.
- Fogging of the windows is another indirect sign that the cabin filter needs to be replaced. Typically, this manifestation occurs when the cleaning device is heavily contaminated. You can verify this by removing the part and inspecting its condition.
The photo below shows what happens to the filter if you do not change it for 5 years.
Charcoal or regular?
There are two types of filters on the market: carbon and regular.
Charcoal is a little more expensive than regular paper. The difference between a carbon filter is that it fights car exhaust gases much more effectively. For example, when standing in a traffic jam with the interior heater working, the car will suck in air from the exhaust gases of cars standing nearby.
A regular paper filter will not be able to effectively deal with this problem and will allow the smell of exhaust gases to enter the cabin. Coal will cope with this task perfectly, and will kill particles of exhaust gases, leaving them on the other side of the car interior.
So when choosing, you should rely on the operation of the car, but if the car is rarely used in traffic jams, then you can get by by installing a regular paper filter.
How to choose a filter?
The most common several filter manufacturers are Halla and Panasonic.
Distinctive features of each device:
- Halla uses a latch for fixation, while Panasonic uses self-tapping screws.
- In the first version, the capacitor is fixed on the radiator, and in the second - on the body.
- Panasonic has a button to force the heating or cooling system to start.
- Halla is a more expensive manufacturer than Priora with Panasonic air conditioning.
What cabin filter is installed on Lada Priora
So, if the car is equipped with Halla air conditioning, the following filters will suit you:
- /2170 Priora/ Fc-011 HALLA (Legion)price from 140 RUR
- /2170 Priora/ with air conditioning HALLA (Tolyatti) price from 250 rub.
- /2170 Priora/ FS-6 with air conditioning. HALLA (Kilometer) price from 130 rub.
If the panasonic air conditioner fits the filters:
- Cabin filter /2170 Priora/ Fc-011 Panasonic (Legion) price from 150 rub.
- Cabin filter /2170 Priora/ with air conditioning. PANASONIC (Moscow) price from 300 rub.
If the car does not have air conditioning, you can select one of the following filters:
- /2170 Priora/ without air conditioning (Fortech) price from 200 rub.
- /2170 Priora/ without air conditioning coal (Fortech) price from 220 rub.
- /2170 Priora/ without air conditioning (Pilenga) price from 200 rub.
Once we have decided on the choice of filter and purchased it, we can begin replacing it.
