About stamped wheels on Lada Granta cars

Reading time: 7 minutes

One of the most modern creations of the AvtoVAZ concern is the Lada Granta car. The model first rolled off the assembly line in 2011 and is still in production. The number of cars sold in Russia and abroad is more than one hundred thousand - this indicates the popularity of the model among drivers, since its spectacular appearance, improved quality of all parts, increased engine life, as well as a relatively low price make it one of the most popular today . Of course, all related auto parts are widely represented on the market, and one of the main ones are wheel rims.

Disc for Lada Granta

This car is practically in the same line with the Priora and Kalina, so many parameters, including the wheelbase, ground clearance, suspension, and hub design are similar. The same can be said about wheel rims.

Lada Granta

First of all, it is worth mentioning the versatility of the model, since the drill pattern of 58.1 mm, as well as the bolt pattern of 4×98, remains unchanged in all models of the concern. In addition, this number and length of studs on the hub fully complies with the standards for small economy class cars from the world's leading manufacturers - 4x100, which gives much more options for replacing discs.

In the simplest configuration, the car is equipped with simple stamped wheels with decorative linings made of polymer materials with a dimension of 5.0J x 13 ET35, and this figure corresponds to the tire parameters 175/70/R13. Car enthusiasts are not very fond of this size, preferring to leave it for the winter and buy larger wheels as a summer option.

The “Standard” and “Norma” configurations are distinguished by wheels with an increased radius - 5.0J x 14 ET35 or 5.5J x 14 ET35, and are fitted with 175/65/R14 and 185/60/R14 tires, respectively. These characteristics improve the visual perception of the car, but are also available only in a stamped version, which does not make the car more expensive when viewed. However, wheels for the Lada Granta R14 can also be purchased in a cast version from independent suppliers and installed on the car as an option.

The latest, top-end configuration of the brand is “Sport”, to the exterior of which the manufacturer has made some adjustments that emphasize the increased dynamic qualities of the car. It is also equipped with Lada Granta alloy wheels with a stylish 6.0J x 15 ET35 grille, on which there are low-profile and wide tires measuring 195/50/R16, significantly distinguishing the car from its competitors.

Disc R13 on Lada Granta

All stages of preparation

It is clear that it is best to clean the disc “to the metal” before painting. In this case, only sandpaper (ISO P400-P1500) and, perhaps, a drill with a metal brush are used.

Read also: lilac color IN COLOR BALANCE

This is how you remove a layer of old paint

The problem is that such cleaning will take more than one day. But the result will please you with its appearance:

Read also: Crusades at 8 points • Arzamas

Fully cleaned steel disc

In order not to waste time, the surface is only cleaned of rust, then sanded and degreased. The “old paint” remains. This option is also considered acceptable. Let us list the stages of preparation “step by step”:

Read also: Limoncello (Sicilian lemon liqueur)

1. Thoroughly rinse the disc with water. To simplify the task, use a brush;
2. Mechanical rust removal;
3. If necessary, you can use a rust converter: apply the product, leave it for 2 hours, then grind the surface and clean it. You cannot use water!
4. Degreasing (white spirit or solvent 646 is suitable);
5. Applying putty if the wheel has obvious defects.
6. Apply two layers of primer with an interval of 20 minutes.

The last step is to use a universal acrylic primer. These products are sold in aerosol packaging.

Note that phosphoric acid can act as a rust converter. And if the finishing layer is applied, it takes a day to dry the soil.

It is important to know: once a mark has been made on the metal with sandpaper, water should not touch the surface in principle. Use organic solvents for cleaning.

The priming itself is a dress rehearsal for the painting process. To simplify these “processes”, the disk can be installed on an inverted bucket. The rim is then painted by turning the disc with the desired side facing you. As you can see, everything is simple.

You may have to work with sandpaper after applying the primer. Sanding with P1500 sandpaper is carried out before painting, which is mandatory.

Alloy wheels R15 for Lada Granta

The optimal wheel size for the Lada Granta is 15 inches, which gives car owners the right to choose any wheel characteristics within this parameter. So, before purchasing wheels for their “iron horse,” owners should know the following features:

• Wheels purchased for a used car must be replaced as a set or in pairs, because otherwise the car will skid and become less controllable on the road. Replacing all 4 products is not a problem if the owner wants to improve the appearance of the car. It is not advisable to purchase only one wheel to replace a deformed one if the old one has been in use for more than a year.
• When choosing the required width of the product, the driver needs to be guided by the place where the car is used, since when driving on good asphalt at high speeds, excessive grip on the road can reduce the speed of the car, and a width of 185 mm will be quite enough, that is, you should not take wheels wider than 5, 5J-6.0J.
• If the driver uses his Granta in winter, he can install wider wheels, increasing the grip to 195 or 205 mm, which will correspond to a rim size of 6.0J-6.5J.
• R15 is the optimal size, and it can be used for installing all-season tires, which will significantly save the owner’s money on tire fitting during seasonal “change of shoes.”

Wheel sizes for Lada Granta Liftback

Due to the fact that this model is considered more advanced than its basic prototype, wheels for the Grant come in the following types:

• R13 is a classic version of “stamping” on a car in the “Economy” configuration, not much different from the wheels on the predecessor model, the dimension of the steel elements is 5.0J x 13 ET35, as an option it is possible to change the width to 5.5J. The tires have dimensions of 175/70/R13, but the driver can slightly “play” with a grip area of ​​up to 185 mm and a profile in the range from 65 to 75 mm.
• R14 is also not much different from the 2011 models, and at the factory this radius is assigned a dimension of 5.0J x 14 ET35, but the car enthusiast also has the right to install 5.5J-6.0J x 14 ET35-38 for tires 175-185/ 55-65/R14. These parameters also most often come in a stamped version, however, on the shelves of auto stores you can find alloy wheels for “Grant” with a dimension of 14 inches.
• R15 - supplied in the “Standard” package. Unlike previous models, the car owner can fully enjoy the road on spectacular alloy wheels. The factory specifications for the wheels are 6.0J x 15 ET35, tires - 185/55/R15. This size is ideal for all-purpose tires for both winter and summer. The driver should remember that it is necessary to change the ET offset from 30 to 40 mm when changing the width of the disk, because wheels of such a radius, installed off-center, can damage the car body.
• In the “Sport” configuration, the “Granta Liftback” has 16-inch wheels. All products are high-quality “castings”, the rubber profile cannot exceed 50 mm, and the wheel width is 195 mm, and, unfortunately, the craftsmen do not recommend increasing it, because the wheel can extend beyond the transverse dimensions of the car. However, in this case, plastic linings on the arches come to the rescue, which look very stylish on a sports car and, at the same time, actively protect the car from pollution. The size of the wheels in this configuration is 6.5J x 16 ET30.
• R17 - the most exclusive products from AvtoVAZ, installed on the Lada Granta Liftback Sport, are made in the best traditions of sports cars, have very elegant spokes, a huge size and low-profile tires. So, the manufacturer recommends 7.0J x 17 ET30 wheels, and this ideally matches 205/40-45/R17 tires.

Popular goods

The main purpose of stamp ink is to apply seals and stamps. Fits into a desktop ink pad. The clarity and durability of the print directly depends on the quality of the ink consumable material, which has the following properties:

• color, brightness;
• composition (base);
• absorbency;
• possible shine.

It is best not to refill replacement pads with paint, but to replace them with new consumables in automatic equipment. Replacement occurs when the print becomes pale and unclear.

Possible colors:

• blue;
• red;
• purple;
• black;
• white, colorless, fluorescent, visible only in ultraviolet rays.

Water-based stamp ink

The main area of ​​application of this type of paint is office stamps and seals. This paint can be used in removable and table cushions. It is suitable for use in both automatic and manual equipment.

Using water paint you can leave an impression on various types of paper. The paint is indelible and waterproof. Does not affect the cliche of the stamping device - it can be made of rubber or polymer.

The color palette is represented by standard colors. Manufacturers offer paints that can only be seen in ultraviolet rays.

Water based paints are not available as shades. Pink, light green, blue colors are not typical for them. If the print begins to appear in one of the shades, it means that the ink pad needs to be refilled.

Alcohol based paints

This type of paint can be used for cotton fabrics and for application to metal, glossy paper, plastic, polyethylene and polypropylene, concrete, glass and other non-absorbent materials.

Paints intended for application to fabric are resistant to boiling and bleaching. Usually the fabric is washed before marking.

Alcohol inks are used only for seals and clichés made of rubber. The photopolymer absorbs alcohol quite well, but is destroyed under its influence; such cliches quickly become unusable and lose their working qualities.

How to choose stamped wheels for a white Lada Granta

When purchasing a white Granta, experts and representatives of dealer centers often advise drivers to purchase the following options for stamped wheels (if the buyer has a limited budget for purchasing a cast or forged product):

• Buy stamped wheels, painted white, without any linings. Also, these products can already be installed for effect on a copy displayed in the showroom of a dealership center.
• Rubber caps in white or beige look very impressive on such models, as they are identical to the matte finish of the sports-style wheel. However, these products, despite their domestic production, are not cheap, since complex polymers and high-quality wear-resistant elastic pigment coating are used in their production.
• The owner may also like chrome-plated steel caps or regular ones in metallic color, which also looks good on the white Granta.
• The last technique used by the designers is contrast, when black stamped wheels or linings on them play very beautifully against the snow-white background of the mother-of-pearl body, which in turn are combined with tires.

Old family (until 09.2018)

Equipment

175/65 R14 82T, N

185/60 R14 82T, N

185/55 R15 82T, N

R is not a radius, but a designation of the radius of the tire, and the number is the diameter of the rim in inches.

Equipment

What other tires and wheels are suitable for the Grant?

A survey was conducted among VKontakte users, asking them to choose alloy wheels for Granta. 42% of participants recommend installing R15 wheels on the Grant. 27% chose R14. Third place (17% of voters) believe that 16 wheels on Grant will look best. The left tire compatibility table is built for 175/70 R13, and the right one is for 185/55 R15:

Green indicates the minimum deviation of the wheel diameter (up to 3 mm); Orange indicates a diameter deviation from 3 to 6 mm.

Based on reviews from owners, we have compiled a list of compatibility of Lada Granta tires and wheels:

• R14 wheels on Granta can be installed with the following tire parameters: 175/60 ​​R14, 175/55 R14, 175/50 R14, 175/45 R14, 175/40 R14, 185/55 R14, 185/50 R14, 185/45 R14 , 185/40 R14, 195/50 R14, 195/45 R14, 195/40 R14, 205/55 R14, 205/50 R14, 205/45 R14, 205/40 R14 and 205/32 R14.
• R15 wheels on the Grant are installed with the following parameters: 175/50 R15, 175/45 R15, 175/40 R15, 185/50 R15, 185/45 R15, 185/40 R15, 195/50 R15, 195/45 R15, 195/ 40 R15, 205/50 R15, 205/45 R15, 205/40 R15 and 205/32 R15.
• R16 wheels on the Grant are equipped with tires: 175/50 R16, 175/45 R16, 175/40 R16, 185/45 R16, 185/40 R16, 195/45 R16, 195/40 R16 and 205/32 R16.
• R17 wheels for the Grant (the same number voted for R13 wheels); it is recommended to install them with tires: 185/40 R17, 195/40 R17 and 205/32 R17.

Don't forget about the rim width:

Equipment and consumables

So, to complete the work you need:

Basic materials and equipment

1. Spray gun with compressor;
2. Drill with a special attachment;
3. Sandpaper;
4. Primer for discs;
5. Paint (in the absence of a spray gun, aerosol at the rate of 2-3 cans per wheel);
6. Solvent;
7. Masking tape;
8. Rags.

DIY painting is done using a spray gun and a compressor. In their absence, you can use regular cans. In addition to paint, you need to prepare a primer, sandpaper and, preferably, have a drill with a special attachment for metal brushes.

What does the size of tires and wheels affect?

Increasing disc diameter

It is worth noting that it is better to choose winter tires for the Lada Grant as narrow as possible. Thus, the pressure of the car on the road surface will be greater, and therefore the grip on the road will improve. Also, do not forget that wide tires are more sensitive to the ruts on the road, and low-profile tires will transfer even the smallest bumps to your butt.

The smaller the unsprung masses

(this includes a lot of tires and wheels), the better the car will hold the road and accelerate faster. For example, if you put wheels on a car that are 2 kg lighter each, then acceleration to 100 km/h will be reduced by 0.2 seconds.

”

Attention! Installing larger wheels may lead to problems with ABS and ESC calibration (the systems may not work correctly).

Let us remind you that for safety and to increase the service life of your tires, you should maintain the recommended pressure in the Lada Granta tires.

>

Preparation of equipment and materials

The technology for applying any paint to car rims involves spraying from a can or with a spray gun; brushes are not applicable here. To operate a spray gun, you need a compressor or an oxygen cylinder, and a small number of country house owners have such equipment.

A set of tools and materials for restoring rims

Hence the conclusion: it is best to buy coloring compounds and primer in aerosol cans, fortunately, there is a wide selection of enamels on sale in such containers. In addition, to complete the work you will need the following tools and materials:

• an electric drill or an angle grinder with a steel wire attachment (the so-called brush);
• coarse and fine sandpaper, 400 and 200 grits are suitable;
• rust converter or its analogue - phosphoric acid;
• degreasing agent - white spirit, nefras (otherwise - Galosha gasoline), organic solvent;
• masking tape, contour tape;
• paint is calculated as 1 450 ml bottle for 2 discs, more liquid rubber may be needed;
• primer (1 bottle for 4 discs);
• rags, rubber gloves, respirator or gauze bandage.

Set of chemicals for painting

Note. Acetone and inorganic solvents for nitro paints are not suitable for degreasing, since they are not capable of decomposing fats.

Important point. The primer must be selected so that it matches the base on which the paint is made. For example, acrylic-based compositions require acrylic primer, and so on. The application technology itself differs little from the type of enamel; the operations are performed the same.