All detailed information about wheels for the Lada Vesta car.
Wheel bolt pattern - data on the bolt pattern of wheel rims on a LADA Vesta car.
Lada Vesta wheels come in two sizes. The manufacturer offers R15 stamped wheels for the simplest versions, as well as R15 or R16 alloy wheels for richer trim levels.
The LADA Vesta operating manual gives the following recommendations for installing tires and wheels on the car:
| Vehicle modification and execution | Tire size with load capacity and speed indexes* | Wheel size | Air pressure in tires front/rear, MPa (kgf/cm2) | |||
| Rim width (inches) | Rim offset (et)**, mm | Partial load*** | Full load**** | |||
| Installed by the manufacturer | ||||||
| "sedan" version | All modifications | 185/65r15 88h 195/55r16 91h | 6j | 50 | 0,21/0,21 (2,1/2,1) | 0,2/0,22 (2,1/2,1) |
| Allowed to be installed during operation | ||||||
| "sedan" version | All modifications | 185/65R15 88T, H 195/55R16 87.91T, H | 5J, 5½J, 6J 5½J, 6J, | 50 | 0,21/0,21 (2,1/2,1) | 0,21/0,21 (2,1/2,1) |
* Speed indices: T – up to 190 km/h, H – up to 210 km/h. Load capacity indices: 88–560 kg; 91–615 kg. **Rim offset (ET) is the distance from the mating plane of the disc to the middle of the rim. *** Partial load – no more than 3 adults in the car without cargo in the trunk. **** Full load – more than 3 adults or 3 adults and a load of 50 kg in the trunk.
It is allowed to use winter tires (M+S) of the above dimensions and index Q with a corresponding limitation of the maximum vehicle speed (up to 160 km/h).
LADA Vesta wheels
Any car owner knows what an important role the sizes of tires and rims play in driving a vehicle.
All car brands have individual wheel sizes set by the designers when creating the model. A car wheel consists of two parts: a disk and a tire mounted on it. For the Lada Vesta brand, the domestic AvtoVAZ has laid down the following wheel parameters:
- R15 – disk radius;
- tire width 185mm;
- profile height 65 percent;
- speed index (H) no more than 210 km per hour;
- maximum permissible weight – no more than 560 kg.
Tires for Vesta are produced under the name Art Motion by Belshina. There are several types of tires for winter and summer use. The rubber is soft, highly wear-resistant, low-noise and has excellent contact with the road surface. The Lada Vesta car is equipped with rims for the specified tires.
The basic version uses stamped models with dimensions 6J15 ET50 4×100 60.1. The manufacturer of the wheels is the Krasnoyarsk K&K plant, which, in addition to stamping, produced light-alloy models called Anna-15 for the domestic Vesta car.
What do these letters and numbers mean?
- 6J indicates the width of the product, in inches
- 15 indicates the diameter of the disk, an inch is also taken as a basis
- ET50 – reach, mm
- 4x100 – bolt pattern (PCD), which gives the driver an understanding of the number of mounting bolts (4) located along a 100mm long circle
- 60.1 – diameter of the central hole of the disk (DIA).
More expensive modifications of Vesta have a tire size of 195/55 R16 with a load index of 91H or 91T. These tires are supplied to AvtoVAZ by the German concern Continental. Alloy wheels for these tires are manufactured by the same K&K. They are called Ptalomey and have dimensions 6Jx16 ET50 4x100 60.1.
A car of the subsequent Lux modification can be equipped with R17 wheels from the same manufacturer for an additional fee.
Combination of Lada Vesta body palette and wheel elements
Today, they very often decorate a car by combining contrasts and different shades in design. The manufacturer met aesthetic lovers halfway and began producing castings in a variety of colors.
To make the wheels on a white Lada Vesta look good, it is recommended to buy wheels in a contrasting black tone. This interesting solution makes it easy to separate the chassis from the body itself. The rims for a black Lada Vesta should be white as a priority, which will make your vehicle stand out brightly and stylishly from the huge number of cars on the highway and in the city.
Dimensions of standard wheels
On the conveyor, Vesta is equipped with wheel rims of dimensions from R15 to R16 with a width of 5.5 to 6.5 inches. The ET offset is in the range of 40 - 50. As for the bolt pattern, it is the same for all modifications of the car - 4x100 mm. The diameter of the central hole for landing on the hub is 60.1 mm.
AvtoVAZ recommends using only original wheel models with standard dimensions for its cars. Otherwise, the plant does not guarantee the performance and safety of using such parts.
What kind of disks can be installed?
Choosing the right wheel size for the Lada Vesta is not difficult at all. The markets offer a huge range of products that can replace domestic original ones, because any spare part has its own service life and sooner or later fails. The simplest and most inexpensive stamped wheels, as well as more improved light-alloy models, are suitable for replacement.
Stamped disks are heavier and their performance characteristics are slightly worse compared to cast and forged models.
There are several positive points:
- the strength of the products is higher, they withstand mechanical stress better;
- have low cost;
- they can be restored and repaired.
Lada Vesta fits 16-inch alloy wheels 175/70 and 205/60, as well as larger sizes 175/55 R17 and 195/50 R18. For Vesta SV Cross, 18-inch ones look better.
Unlike their counterparts, forged models have a higher degree of strength and less wear. These wheels are the lightest, which has a positive effect on driving dynamics and fuel efficiency. Along with all the positive aspects, forged wheels have a high cost and not everyone can afford to purchase such a luxury. Therefore, such wheels are extremely rare on Lada Vesta.
The car manufacturer made sure that the buyer did not have a question about where to get the necessary wheels. AvtoVAZ entered into an agreement with the K&K company, now the products of this plant are unified with the Lada Vesta passenger car. When choosing a disk, you need to pay special attention to its markings. The data must fully comply with the manufacturer's recommended values.
Advice. In winter, it is better to install wheels and tires with a smaller width; this will give the car confidence in handling on slippery roads.
Another nuance that is worth paying attention to when choosing the disk you like. Many drivers strive to install wider wheels. In this case, the manufacturer does not bear any guarantee for the consequences, since AvtoVAZ only declares certain sizes. Increasing the disk parameters can lead to a loss of comfort and controllability when driving the car. It is important to set your priorities correctly and choose the best.
Lada Vesta allows you to mount wheels of a wide range of sizes. In this case, you need to pay special attention to turning the wheel so that the tread does not touch the car arch. If you want to install a wider rim, you need to reduce the tire profile height. But this reduces the comfort of driving the car.
Difficulty of choice
Such a wide range of disc offers, which are offered today by domestic and foreign manufacturers, creates certain difficulties when purchasing components in Moscow. After all, sometimes brands charge completely different prices for the same technical characteristics of products. However, does the quality really live up to its claims?
On the website of the online store “Wheels for Free” you can read various reviews from motorists who have already managed to evaluate in practice all the advantages and disadvantages of various wheels on the VAZ Vesta Sedan 1.6 2015 and make your choice. You can also consult with the competent managers of our store, who will not only be able to choose the best wheel option for you in terms of quality and cost, but will also answer all your questions.
When choosing wheels, it is worth noting the importance of the quality of the roads you drive on. If you have to overcome extreme terrain difficulties every day, then it makes sense to give preference only to budget stamped components.
If you have a limited budget, you can always purchase a more affordable, but no less high-quality replica. Moreover, today many brands create copies of original wheels, which are in no way inferior in terms of performance characteristics to “original” parts.
Acceptable tire sizes
Knowing certain parameters of tires and rims, the problems of replacing wheels on a Lada Vesta car can be avoided. The manufacturer allows the installation of a large number of dimensions within the wheel diameter R 15 - 17. Some even manage to fit 18-inch models into the car.
It all depends on the desires and capabilities of the buyer. Properly selected wheels are the key to safety on the road. It is advisable to avoid mistakes and installation of unsuitable wheels and tires.
Source
Wheels for top assemblies of Lada Vesta SV
More expensive Vesta configurations are supplied from the factory with slightly different ramps than the basic assemblies, namely 195/55R1691Н . These tires are the German EcoContact produced by a company such as Continental and come in pairs with Ptalomey-16 6Jx16ET504x10060.1 appropriate for the tires .
As for wheels of the maximum size, for example, the Luxe version of this car is equipped with Ptalomey-17 or, in other words, 17-inch wheels.
It should be borne in mind that the basic assemblies of the Lada Vesta SV can be equipped with such wheels for additional money.
Regarding the compliance of standard and AvtoVAZ-approved tires and wheels, this information is presented in a tabular format:
Standard wheels
A car wheel consists of a disk and a tire, which have individual characteristics.
The AvtoVAZ concern indicates the standard tire size for the Lada Vesta car in the basic configuration - 185/65/R15 88 N (the manufacturer allows the use of T). It means:
- width – 185 mm;
- profile – 65% of 185 mm (120.25 mm);
- The tire must be mounted on a rim with a diameter of 15 inches;
- 88 – load capacity index 560 kg;
- H – speed index, up to 210 km/h (for T – up to 190 km/h).
Such tires under the name ArtMotion for AvtoVAZ are manufactured at Belshina OJSC; the products are characterized by moderate softness and good rubber wear resistance, low noise and excellent road holding. Belshina OJSC also produces tires with identical characteristics in a winter version - the ArtMotion Snow model.
In the basic configurations of the Lada Vesta, these tires are mounted on stamped steel rims of size 6J 15 ET 50 4x100 60.1 (as an option - light alloy models of the same dimensions ANNA-15 from the manufacturer K&K), which means:
- 6J – disk rim width (6 inches);
- 15 – mounting diameter in inches;
- ET 50 – offset 50 mm;
- 4x100 (PCD, bolt pattern) – the disk is secured with 4 bolts located around a circle with a diameter of 100 mm;
- 60.1(DIA) – size of the central (hub) hole.
For top-end configurations of Lada Vesta, the factory installs wheels with dimensions 195/55 R16 91 N (T allowed):
- width – 195 mm;
- profile height – 107.25 mm (55% of 195);
- R16 (mounting diameter of the disk) – 16 inches;
- 91 (load capacity index) – 615 kg;
- H (speed index) - up to 210 km/h (T is allowed - up to 190 km/h).
These EcoContact tires are supplied to AvtoVAZ by the German company Continental. They are mounted on light alloy wheels of the K&K company model Ptalomey-16 with dimensions 6Jx16 ET50 4x100 60.1, the geometric characteristics of which differ only in the mounting diameter - 16 inches.
For basic versions of Lada Vesta, installation of wheels of these dimensions on K&K alloy wheels is also possible as an additional option.
In the Luxe configuration of the Lada Vesta, for an additional fee, it is possible to install wheels even with 17-inch rims of the same model - Ptalomey-17.
For clarity, let’s summarize the correspondence between the sizes of tires and wheels of the Lada Vesta in a table.
Features of standard tires
Lada Vesta SV base assemblies come from the factory with Belshina tires, which:
- designed specifically for this car model;
- have high quality parameters;
- are products under the ART Motion brand. This, by the way, is not just a brand, but a sign that these stingrays undergo a series of tests for compliance with European standards.
In basic Vesta assemblies, these tires come with steel stamped wheels 6J15ET504x10060.1, where:
- rim width in inches – 6J;
- in inches, the mounting diameters of the slopes are 15;
- disc offset – ET50 or 50 mm;
- PCD or bolt pattern parameters (4 bolt holes, symmetrically located on a 100 mm circle) – 4x100;
- diameter in mm of the hole DIA for the hub is 60.1.
Alternative wheel sizes for Lada Vesta
Installing wheels of a different size on a car is not a rare situation, and the reasons for this can be different - from restoring the car after an accident to tuning. Let's consider common acceptable options for installing non-standard size wheels on a Lada Vesta, the pros and cons of this procedure, as well as errors that can lead to deterioration of the vehicle's performance and even premature failure of some components.
The situation when a car enthusiast decides to “change” his car to new tires of the standard size, but manufactured by another manufacturer, without replacing the wheels, does not require any special comments. However, there are rules here: all tires must have the same tread profile or the same degree of wear (differences in the tread profile of pairs of tires on the front and rear axles are allowed).
Caps for Vesta
Many car owners strive to ensure that their iron horse has a unique appearance. Not everyone has the opportunity to buy alloy tires, especially since high-quality models are not cheap, and alternative sizes will require different tires. In such a situation, it is optimal to put wheel caps on the wheels.
The main task is to improve the appearance. In addition to beauty, caps also perform a protective function, namely, they prevent dents, scratches and abrasions of the wheel rim.
Depending on the design, the cap can also keep excess dust off the brake pads, increasing their lifespan. As a rule, the cost of products is low. Usually the average price does not exceed 2,000–3,000 rubles for a set of 4 pieces.
Features of the caps
These accessories may vary in the shape of their profile (flat or convex). You can also buy metal options, but most often you can find plastic ones: more practical and inexpensive. By design, they can be closed or open, as well as in different colors.
Depending on the manufacturer, the caps may have different fastenings. There are models that are fixed with bolts. There are also those for which nylon clamps are sufficient. Plastic caps are much more popular than metal ones, because they are inexpensive, they are stronger and you don’t mind them. Their service life is not that long. The open shape of the caps does not hide corrosion well, but provides good cooling of the brakes.
The cost of products depends on various factors. The most acceptable option is a kit for installation on standard R15s; the original one will cost 1,500–2,000 rubles. Accordingly, the larger the radius, the higher the cost.
Installation of hoods
Any car owner can install them on Vesta with his own hands; there is nothing difficult about it. Before starting work, you need to clean the disk from dirt and corrosion. If necessary, it is necessary to correct irregularities and dents, if any.
There is a recess on the cap for the nipple for pumping air into the tires; it must be aligned with the valve on the wheel. Next, you should make sure that the metal ring on the inside is in the grooves of the latches (the ring ensures equal pressure around the circumference). All that remains is to place the cap on the disk and check the reliability. Additionally, you can use plastic clamps to secure the cap to the wheel more firmly: this prevents the accessory from flying out when driving, which is not uncommon.
Unsuitability of disks of other Lada models
Wheel rims of size 185/55/R15 from the AvtoVAZ Grant, Priora and Kalina models cannot be installed on the Lada Vesta, even though at first glance they seem suitable. The diameter of the hole for the wheel hub of these cars is 58.5 mm, that is, 1.6 mm less.
But, even if this hole is bored on a lathe to the required size, the bolt pattern (PCD) of these products is 4x98, not 4x100, and 3 of the four mounting bolts will not be centered relative to the mounting holes, accordingly, the disk will not be aligned with the hub, and its rotation will be accompanied by beating.
Installing larger diameter discs
Large rims not only change the appearance of the car, but also affect its dynamics, maneuverability, and stability on the highway, and not always for the better.
When deciding on their installation, you should know the basic principle - the larger the diameter of the disk, the lower the height of the tire profile, because the size of the outer diameter of the wheel is tied to the size of the wheel arch - when turning, the tire should not touch or rest against anything at all steering wheel rotation range.
Testing the Lada Vesta over the course of a year showed acceptable wheel size options:
17-inch wheels were installed on the Concept version of the Lada Vesta. Technically, this sedan can also be equipped with R18 wheels, but the outer diameter of this wheel (669 mm), as well as the tire width (235 mm), differ significantly from the factory values and cannot be considered in the real conditions of Russian roads due to the too low profile as practical - defects in the road surface will quickly damage both tires and wheels, the price of which, due to their size, is several times higher than the cost of standard ones.
The effect of large-diameter wheels and low-profile tires on a car
- increasing the style of the car and the effectiveness of the exterior;
- improvement of driving qualities - dynamics, road stability, steering sensitivity;
- better “absorption” of potholes compared to a smaller radius;
- with a tire profile from 55 – increased durability of the suspension;
- reducing the braking distance;
- increasing the efficiency of ABS and ESP.
- uncomfortable driving due to sensitivity to road surface defects;
- restriction of use on roads with defective surfaces;
- the need for increased pressure control;
- greater need for kinetic energy at the start - higher fuel consumption;
- higher cost.
Low profile tire pressure
This parameter, ignored by novice car enthusiasts, is very important when operating cars with any tires, and especially with low-profile ones. The required tire pressure is always indicated by the vehicle manufacturer in the operating instructions and in an accessible place on the body, for the Lada Vesta - on the B pillar on the driver's side.
Low profile tires require increased attention to pressure, as insufficient pressure will make the wheels and suspension even more vulnerable to potholes and rocks on the road.
As many years of experience have shown, the pressure in low-profile tires must be maintained 15% higher than that specified by the manufacturer for wheels of the recommended size.
What does the size of tires and wheels affect?
| Increasing disc diameter | Increasing rim width | Increasing tire width | |
| Car style | will improve | will improve | will improve |
| Road holding | will improve | will improve | will improve |
| Steering precision | will improve | will improve | will improve |
| Tire grip | Will not change | Will not change | will improve, but only on dry roads |
| Resistance to hydroplaning | Will not change | Will not change | will get worse |
| Comfort on rough roads | will get worse | Will not change | will improve |
| Road noise | Will not change | Will not change | will intensify |
| Gasoline consumption | Will not change | will increase | will increase |
| Tire wear | Will not change | Will not change | will increase |
If you are going to buy winter tires for Lada Vesta , then try to choose narrower tires. These tires will create more pressure on the road surface and improve traction. Remember that wide tires are more sensitive to ruts in winter. And low-profile tires make the ride less comfortable, because... transfer even the smallest holes to the body.
The smaller the unsprung masses
(this includes a lot of tires and wheels), the better the car will hold the road and accelerate faster. For example, if you put wheels on a car that are 2 kg lighter each, then acceleration to 100 km/h will be reduced by 0.2 seconds.
Attention! Installing larger wheels may lead to problems with ABS and ESP calibration (the systems may not work correctly).
What wheels and tires did you choose for the Lada Vesta? What are the pros and cons of such a replacement? Participate in the survey, leave feedback and ask questions. Let us remind you that in this article we determine the real fuel consumption of this car.
Categories of products that may be of interest to you based on the article “Recommended size of tires and wheels for Lada Vesta”:
No entries found.
Products from the Dustershop77 range on the topic of the article:
| Image | vendor code | Name | Manufacturer | Price | Availability | Add to cart |
How to choose wheels for Lada Vesta
In addition to the main sizes of tires and wheels, which clearly indicate their suitability or unsuitability for the Lada Vesta, there are other parameters and nuances, ignoring which when choosing is fraught with subsequent troubles.
Disc offset
This parameter (ET) is a critical characteristic, and when purchasing, it is better to be guided by the ET value specified by the car manufacturer.
Installing wide wheels with a reduced ET value increases the vehicle's stability, but at the same time increases the load on the wheel bearings, the consequences of their destruction on the move are unpredictable.
Reducing the offset is allowed by no more than 5-7 mm.
PCD parameter
This value (bolt pattern) must be observed absolutely when choosing new discs. If the PCD marking is different from the value specified in the machine's operating instructions, it will not be possible to install the discs.
Hub hole diameter (D)
Some manufacturers produce wheels with an oversized hole diameter for the hub - this circumstance allows them to be used using special inserts - centering rings on many car models. Therefore, a larger hole diameter for the hub is an easily solvable problem, in contrast to the opposite situation, when the hole is small.
And yet, there is a common situation when bolted fastening seems sufficient to the car enthusiast, and the use of centering rings is neglected. In this case, at speeds above 100 km/h, wheel runout begins, which can be difficult to diagnose, and pointless balancing costs follow.
Rim width
This parameter is important when choosing rims for existing tires - the use of excessively narrow or, conversely, wide rims distorts the geometry of the plane of contact of the tire with the road surface and worsens the dynamic characteristics of the car. In addition, when driving on snow or dirt, wide tires slip due to low specific pressure on the road, so when choosing the size of tires and wheels, you should take this factor into account.
Tire pressure
Such a parameter as tire pressure is usually ignored by newcomers to our garage community. However, tire pressure is an important factor during the operation of a car, due to the fact that, for example, low pressure;
- is a consequence of accelerated tire wear;
- causes increased fuel consumption;
- makes both tires and rims vulnerable to the effects of potholes.
As for too high tire pressure, this can lead to:
- Fatal accidents resulting from a tire blowout at speed;
- increased wear of the suspension;
- discomfort while driving.
The optimal tire pressure is indicated by the factory, as a rule, in two places, namely in the operating instructions, as well as in some visible place directly on the car. As for Vesta SV, this information is available in the form of a plate on the end of the driver's body pillar.
