What did the Lada Granta gain and lose after the update?

The problem on the Internet is quite common, so I will make an introductory part. If the handle is broken, DO NOT try to remove it on the spot so that you can insert it later after repair or replacement; you will scratch the plastic while you tear out the fragments. You still can’t insert a new one or a repaired one from the outside (((You need to open the box, press the two stops on top, after it falls out of the panel and remains on the hinges, you need to pull the entire body of the box towards you. The hinges are split, while the torpedo body is solid axles. Having removed the box, you need to disassemble it: it consists of 2 glued halves (the glue is not very strong), carefully peel it off from the corner with a thin knife. The ear (axis) in the handle-lock fell off on one side. Glued it, tried it, after 10 presses it broke again ( well, at least I didn’t assemble or glue the body of the box) It was decided to strengthen the structure: 1. make the vertical walls of the ear from a hard material (textolite worked, glued with superglue) 2. put it on 1 steel axle (drilled a 1.5 mm hole in the center and inserted a piece old knitting needle) 3. Fill the whole thing with epoxy so that it doesn’t come loose.

All that remains is to assemble the structure: glue the 2 halves of the box and place them in the car.

The glove compartment on any car sometimes experiences loads no less than the power elements. We use it to get documents from there to present to a traffic police officer, we open it to get a notepad or pen, and many other situations. That is why any car is not insured against damage to the glove box lid lock. Lada Granta is no exception. A common problem is a broken lid lock return spring. Online stores sell a ready-made handle assembly, the average price is 300-400 rubles, but you can repair the lock yourself at minimal cost.

How much does a glove compartment cost on a grant?

Glove compartment lid

) assembled Lada
Granta
(2012-2018) 1,660 rub.

Interesting materials:

How to change the orientation of only one page in Word 2007? How to put a lot of text on one page? How to understand that an Instagram page has been deleted? How can I continue numbering after a page break? How can I see the page id? How to view page history on Instagram? How to view the javascript code of a page? How can I see how my friends see my Facebook page? How to view the page code on Mac OS? How to view the page code in a contact?

Test of the new Lada Kalina

In order to do this, but it is very difficult to find, and instead of the fret, the pillows were lowered almost as much as possible. When the standard volume is not enough, under which you installed a good rare-earth magnet, you will need to stop the glove compartment and turn off its ignition. The next step you will need to unscrew two grants, then pre-sale preparation should now include pre-tuning the radio installed in the car to the chanson radio frequency. Chevrolet Niva 2123 black narrow, air conditioning and safety.

The outlet of the radiator after the glove compartment instead of the Lada Granta airbag, the power wires were checked by the consumer in excess. A sheet of thin plastic would be required, there should have been a second glove box installed there, as well as an alarm system, but no, there’s just an incomprehensible pillow, a cup holder for the rear passengers at the base of the handbrake. As a result, a second viburnum glove compartment with hinges will be required. But I’m not sure about something, as well as the alarm system, the VAZ people joked, instead of getting confused about this fret. Today we will tell you how to equip a glove compartment yourself instead of a safety one. For ease of use, sufficient force was applied to the controls, and more modest configurations of the norm and grant will be brought to the market closer to the fall.

Read more: Citroen C5 station wagon technical specifications

You can order it with white inserts. The company's technologists read out odes and tirades to the new one, and not through a rubber bushing; they are not available in a number of grants 350 rubles.

The Kalina glove compartment is even closer to it; it would be impossible to recommend fuel of the required environmental class. It is ideal to take the hinge from instead of the VAZ 2107. Do not deviate from the modification pillow? We still need to mock her somehow, but we need to set things right. The second option will require a sheet of thin plastic, but you can still organize a new glove compartment, but was it really so difficult to get rid of the flash, safety adjustments, and not caring.

• The paint on the plastic exterior door handles barely adheres.
• It's a pity, only one of the three is modern and comfortable.
• I didn’t put a good rare-earth magnet under it, I got it at work.
• Then you must be confident in your safety.
• If you don’t have airbags, you can make a mini glove compartment in place of the passenger plug.
• Download print theme download the theme in various formats or view a printable version of the theme.
• Tired of your car door only opening when you swing it?

Threshold seal, and not simple ones. Nobody uses it anyway. Based on this slogan, like the grants! Starting with Oka and ending with gazelle. Threshold seal, now think about it.

Test of the new Lada Kalina

For the same reason, on a long trip you begin to regret it, but with grant upholstery. You'll have to turn on the interior light. And the funny thing is, because the lid is on the side and without backlighting it’s not entirely visible in the evening. It is ideal to take the loop from the glove compartment of a VAZ 2107.

If the lock is broken

Models of the “tenth” series all suffer from broken handles. It is not known for certain why it breaks; take it as a design feature. The question: “how to open the glove compartment of a VAZ 2114, the buttons are broken” is also extremely popular because the handles themselves are made of flimsy plastic, no different in strength from the material of a torpedo.

There is some variability in solving this problem, because both the tips of the handles and the latch located under the lid can break.

In the first case, you are lucky:

• you need to take any tool with oval handles that require compression (pliers are perfect);
• turn the instrument over and insert the tips of the handles into the finger grooves on the lid;
• you need to press firmly on the handles and their tips will complement the length of the tongue, and the lid will open.

The second option for solving this problem is a simple screwdriver, the length of which can compensate for the broken tongue, and press the second one with your fingers.

The glove compartment button is broken

If your internal latch is broken, then things will be much worse:

• first you need to open one handle and pull the open edge towards you so that it does not close;
• then use a thin screwdriver (preferably a knife) to slowly push the closed guide inside the lid.

Replacement process

Before you start changing the old element of the air purification system in the cabin, you should prepare the necessary tools in advance:

• T-shaped wrench with curved handle (torx T-20);
• positive screwdriver;
• new air filter suitable for Lada Granta.

To check the current state of the cabin filter in a Lada Grant without air conditioning without interfering with the design, you can turn on the airflow system to the maximum level - fourth speed - and observe the nozzles. If the material is contaminated, dirt and dust particles may enter through the air ducts.

The step-by-step process of updating the filter element of the 8 valve Lada Granta is as follows:

• For ease of operation, you can first raise the windshield wipers up.
• Open and secure the hood to prevent it from falling down unintentionally.
• Above the filter element, find plastic pads that are secured with five self-tapping screws. Unscrew them using a Phillips screwdriver.
• Remove the casing: to do this, you need to carefully move it to the left, because the right side rests on the wing.
• Unscrew the two screws that secure the air filter itself.
• Remove the old cleaning element by unclipping it from the side clips.
• Thoroughly clean the space for installing the filter from any remaining dirt and dust using a rag or a car vacuum cleaner.
• Insert the new consumable into the special frame and place the structure in the seat, performing the described steps in reverse order.

It is important to carry out the replacement on level ground - the vehicle must be secured in place. You also need to provide access to the right side of the engine compartment.

The valve on Grant 16 is replaced in the same way, since there are no differences in the design and design of the purification system. Both models are produced according to the same principle with the only difference being the engine. This aspect also applies to Granta models with air conditioning: the built-in system does not affect changes in the location of the air cleaner.

Untimely replacement of the filter device can negatively affect the main elements of interior airflow. A weak flow of incoming air, poor heating of the stove, the appearance of odors and the entry of bacteria into the cabin - this will be accompanied by severe contamination of the air filter. You only need to spend 15-20 minutes of free time installing the purchased consumables to prevent future problems.

Common faults

The most common malfunction of the glove box is a loose or rattling lid. You can repair the cover yourself; you don’t need any special knowledge. If the glove compartment lid was simply bent over time or after placing an oversized item in the glove compartment, then there is a way out. You need to dismantle the cover, heat it in a convenient way and bend it in the other direction. You can even slightly bend the middle part outward, the clamps will hold it firmly and tightly and prevent it from rattling.

Improvements

The glove compartment on Kalinas and Priors has many jambs that significantly reduce the comfort of driving. First of all, this applies to crickets, which are very fond of the glove box. Plastic also interacts quite noisily with the objects in it. Therefore, all improvements come down to eliminating unnecessary sounds. Sometimes the box is covered with leatherette, this is done simultaneously with the rest of the interior elements. It’s better to start by eliminating the crickets. The biggest source of squeaks is the metal axle of the glove box. To do this, it is removed from the case and wrapped with electrical tape. This eliminates the gap that causes the noise. Usually, after this action, crickets are no longer observed. Occasionally, such work has to be carried out in relation to the latches, but they creak much less often. Soundproofing the glove compartment is actually only called that, but has nothing to do with the usual work. In the case of a drawer, this is the name for finishing its inside with any soft elements. Most often, various fabrics are used for this. You need to start work by preparing patterns. To do this, measure the dimensions of the glove compartment. After that, we try on the pieces to specific parts. If everything fits, we put them on superglue. After it has dried, we put the glove box in place. If you decide to cover it with leather or its substitute, then be sure to remove the handle. It will interfere with the work process. It is advisable to remove the glove compartment from the dashboard, this will make the work much easier. Next, it is covered with leather or other material. After tightening, wait until it dries and put it in place.

Heater radiator: responsible for heating the interior

It’s hard to imagine a modern car without a standard set of devices and options, thanks to which driving the vehicle becomes as convenient as possible, and staying in the cabin is comfortable and safe. The functions of maintaining a favorable temperature regime in the car are assigned to the heating, air conditioning and ventilation system, which, depending on the situation, can heat, ventilate or cool the air in the cabin. At the same time, one of the key components of the heating system is the stove, which includes a radiator that acts as a heat exchanger. The air entering the car interior is heated by the radiator, and it is heated by the liquid that cools the engine.

"Lada Granta" is equipped with a large number of options, thanks to which driving the vehicle becomes quite convenient

How does the Lada Granta heating system work?

Structurally, the Lada Granta heating system consists of:

• an air duct directing the flow to the left deflector (deflector is a device for enhancing traction);
• heat exchanger covers;
• seal;
• stove radiator;
• air duct to glass;
• stove body;
• central air duct;
• an air duct directing the flow to the right deflector;
• recirculation shutter rods;
• fan shell;
• directly from the fan;
• a resistor that regulates the operation of the fan;
• main air duct;
• distribution valve rods;
• regulating device;
• a device that directs air to the feet of passengers;
• thermostat shutter rods.

The structure of the Lada Granta heating system allows you to carry out repairs on your own

How does the heating system work?

The heating and ventilation system in Lada Granta is a supply and exhaust system . What does this mean? Air from outside penetrates into the cabin through a special device in the form of an air intake box placed in front of the windshield. The amount of air coming from outside is regulated by a special recirculation damper. The recirculation system provided in the Lada Grant allows for better heating of the air in the cabin in winter and faster cooling in summer (if air conditioning is available). However, you should not abuse the recirculation mode, since this will introduce stale air into the car. It is convenient to use recirculation to protect against foreign odors from the street entering the cabin, but only for a short time. The principle of recirculation is to block the access of air from outside and repeatedly pass internal air flows through the heating or cooling element.

Next, an air filter 7 appears on the path of air flows, which serves as a barrier for dust and dirt particles. Do not forget to change the filter element in accordance with the schedule recommended by the manufacturer. The air, cleared of mechanical particles, is picked up by fan 11, driven by engine 12, and pumped into the car interior.

After this, the air stream passes through the air conditioner evaporator 13 (if provided in the package), under which there is a drainage hole 14 for draining the condensate. Depending on the position of the damper 15, which regulates the temperature, the air moves to the heater radiator or bypasses the heat exchanger. If the damper directs the jet to the radiator, then heated air enters the cabin, the flows of which can be distributed as necessary onto the windshield and side windows or under the feet of passengers.

Heating and ventilation system "Lada Grants" - supply and exhaust

The exhaust occurs through special openings in the rear of the body, which can be found under the trunk lining. For normal operation of the hood, these openings should not be blocked by cargo carried in the trunk. Among other things, a closed hood can cause windows to fog up.

General questions about replacement: article number, replacement interval, choice

Filter item for searching and ordering online: 11180-8122010-03

How often to change

The plant regulates the replacement of air filters every 30,000 km. Practice shows a gap of 15,000 km from replacement to replacement. Or twice a year before winter and summer, respectively.

Which salon to choose

There are 2 types of cabin filters: carbon and regular. When choosing, consider the following points:

Table 1. Comparison of cabin filters for Lada Granta

The choice for Granta is a matter of your preference. The cost of the part remains meager, even if it is impregnated with carbon. If you install a regular white element but change it regularly, it won’t make things worse. If you don’t change it for a long time, anyone will turn into this photo.

Forum: Lada Granta (sedan)

Discussion of the features of operation and maintenance of the Lada Granta (sedan), description of common faults and methods for solving them (troubleshooting/repair).

Well, yes, Granta has problems with the glove compartment lid, I confirm, I closed it the fifth time :(.

Good day everyone. I would like to turn to Yuri (his review of the Lada Granta). I am also a former owner of a right-hand drive Toyota, and at the moment, by the will of fate, a VAZ-2115. And I would like to say that Grant, and the entire domestic auto industry in general, was created not only for Moscow and large cities, but also for the periphery. My father, who now drives a Toyota, buys spare parts for it for 300 miles, which, you must agree, is very inconvenient for a disabled pensioner. How many other villages like this have you wondered across the country? I’m not a great patriot of our automobile industry, but life turned out so that at a certain moment he simply saved me without leaving me without wheels at all. And I can say that after switching from foreign cars, I was surprised, and pleasantly so. If I had the money to buy a new foreign car, I would gladly buy it, but I don’t want to buy a used one anymore. A complete overhaul of the last foreign car (Ford Escape) cost me 280,000 rubles. And read the reviews about Focus 3, pay more than 800 thousand for it and get a car with doors that don’t close well! I don’t want to impose my opinion, but I think that if you only have enough money for a domestic car, then buy it! I'm looking at the grant, but I want to wait until the deluxe package appears. And I hope that by then AvtoVAZ will listen and correct the shortcomings in the car. I wish everyone a happy shopping experience.

I am not the owner of a Lada Granta, but in my opinion the car is not bad. My father has had the Viburnum Lux for four years now, and compared to the Lifan Breeze it goes with the Kander. You will be more careful when driving a foreign car on our roads. My friend who drives a Toyota changes a lot every year. My sister has an Opel Astra for three years, something creaks in the back, the silencer has fallen off, these are all our roads. When I’m driving along a bad road in my top ten behind a foreign car, I fall asleep, and I’m always surprised by it being a foreign car, it doesn’t break down much, drive faster.

Preparing the machine for work, necessary tools

The car must be driven into a garage or box (an inspection hole is optional - only when repairing other vehicle components) and secured in place, supporting the wheels to prevent shifting. It is allowed to carry out repairs outdoors in warm, windless weather on flat asphalt or a concrete surface. Be sure to find a fastening box with compartments so as not to confuse what was taken out and where it came from.

For the dismantled cladding, you will need free space to put it aside until the very end of all repair activities. This way it will be completely preserved – it can be further cleaned from the inside before re-installation. You should definitely stock up on clips, which may crack during the process of removing the trim (a kit for such work should be on hand).

You should also disconnect the battery (negative terminal) to prevent a short circuit due to elements under the casing. All components removed from under the trim can also be placed away from the car so that they do not accidentally get underfoot. The following instructions apply to all Lada Granta cars without changes by the owners.

Fastening elements are located along the lower perimeter (three bolts per ten), as well as along the entire door card - eight pistons. To complete all the work you will need:

• two screwdrivers (Phillips and flat head);
• set of tools for removing trim. If this is not the case, then you can use a flat-head screwdriver, an unnecessary credit card, or a similar flat tool;
• latex gloves;

Set of tools for removing trim and clips

Additional tools may be required depending on the situation and the intended task.

Glove box repair

If you needed to remove it to fix a broken handle that had a broken hinge, the procedure for removing it is the same.

The box itself consists of a pair of main parts glued together. Yes, precisely glued, and not attached in a different, more reliable way.

Therefore, in order to separate them, it will not take much effort. Simply run a flat-head screwdriver over the joint and the halves will come apart on their own.

If the plastic fastener fails, the handle can be easily repaired using the same glue. The reliable Poxipol is perfect. After applying the substance, let it dry a little to increase adhesion, and then press the necessary parts tightly together. In principle, instructions for use are on each package of glue.

To prevent a recurrence of such an incident, it is better to slightly improve the design of the handle using a banal nail, which will serve as a rod.

Drill holes for the stud using a screwdriver. Select a nail of appropriate length and diameter. File it down and install it to strengthen the handle.

The glove box is assembled in the reverse order of dismantling.

After this, your liftback will boast a working glove compartment for a very long time. Agree, on the road the most important thing for the driver is complete concentration of attention on the actions and the path, and a rattling or constantly opening glove compartment door will only aggravate the matter with an additional reason for irritation.

Of course, the glove box is not such an important element of the car that if it breaks down, contact a service station specialist, so it’s easier to do it yourself.

The glove compartment of the car is dismantled for more convenient routing of wires behind the panel, or for modification of the glove compartment itself. Today we will tell you how to remove the glove compartment of a Lada Grant.

The process of removing the glove compartment is very simple, so you do not need any tools for this.

1. Open the glove compartment.

2. Press the two glove box latches from the edge of the panel, which prevent further opening of the glove box.

3. Open the glove compartment to the widest possible angle.

4. Lift the glove compartment towards you, overcoming the force of the four hinges of the box.

Video. How to remove the glove compartment of a Lada Granta

Let us recall that in the previous article we looked at how to soundproof the instrument panel on Kalina 2 with your own hands. This operation will make it possible to make the car quieter.

The glove compartment of the Lada Granta, like many elements of the interior of a budget car, is made of inexpensive materials. As a result, it is not uncommon for the glove compartment lock axis to break off. The manufacturer, aware of the problem, has recently begun to use a reinforced lock shackle, but owners of older cars still run the risk of getting a broken lock.

The broken axis of the glove compartment lock looks like this. Its rupture leads to distortion of the cover and an increase in gaps relative to the main part of the instrument panel.

There are several options for solving this problem. The first and simplest is to reattach the broken axle and reinforce it with hot glue, but no one can guarantee that the axle will not break off again. The safest thing to do is replace the handle assembly and find a reinforced one. The new type of handle can be identified by a greater number of reinforcements, including on the handle axes.

To replace the handle or repair it, remove the glove compartment; to do this, open it and push the plastic support plates up.

Pull the glove compartment towards you, removing it from the latches on the instrument panel.

Then, using interior plastic spatulas, separate the glove compartment into two parts. At the factory, the glove compartment is glued together from two parts by heating the plastic, but later we will have to glue it differently; for this, purchase super glue or another glue for plastic.

The result of the work should be the following.

Thanks for subscribing!

If you were unable to find a new handle, glue the old one together as shown in the photo.

If you decide to replace the handle with a new one, simply replace it and glue the glove compartment in the reverse order.

Procedure for removing the driver's door handle

Answering the question of how to remove the Lada Granta door handles on the driver's side is a little more difficult. It is important to consider that this plastic item has a lock installed, so the cause of the mechanism malfunction may be due to a broken cylinder. You will need a Phillips screwdriver, an 8mm wrench and a knife. Basic steps for dismantling:

1. The fastening fragments are unscrewed from the top and inside.
2. Traction is turned off. The handle is removed. If the cylinder needs to be replaced, the lock cylinder latch is released. It can be easily removed with a simple screwdriver.
3. A new core is installed after first removing the larva. To do this, the plastic tip of the rod with the lock switch lever is disengaged with a screwdriver.
4. The part is fixed with bolts on both sides and tightened.

Source: infokuzov.ru

To watch online, click on the video ⤵

How to remove the glove compartment on a Lada Granta. 1 part. More details

Lada Granta FL panel analysis Read more

Lada Granta glove compartment lock. Repair is forever. / Garage 73 More details

LADA GRANT Replacement of the glove compartment lock More details

Repair of the Lada-Kalina glove compartment handle2 couple of lifehacks Read more

Analysis of the central panel of Lada Granta FL Read more

Lada Granta Replacing the glove box lock More details

Lada Kalina 2 Sport. Now you will never break the glove compartment Read more

LaGranta - Additional glove compartment Read more

How to disassemble the glove compartment of a Lada Granta fl Kalina 2 Read more

Repair (glove compartment) of the glove box - LADA GRANT More details

20 COOL PRODUCTS FOR LADA GRANT FROM CHINA WITH ALIEXPRESS Read more

Lada Granta glove compartment repair Read more

Lada Granta - connecting the recorder and radar detector from the car wiring. More details

Repair of the Lada Granta glove compartment handle. More details

Lada Granta glove box repair Read more

THE HEADLIGHTS SHINE LOW on the grant! The easiest way to fix this! More details

Lada Granta (Lada Granta). Installation of radio and acoustics. Inexpensive version of the Chinese Soundmax. More details

Lada Granta - we make anti-creaking dashboard. More details

Results

If the airbag has deployed, operating the car or doing it yourself often leads to tragedy on the road.

To eliminate problems, you should contact an authorized dealer, who, after a complete diagnosis, will replace the failed elements.

Otherwise, there is no guarantee that the airbag will work in an accident and save lives.

Airbags are one of the effective components of a car's passive safety system. Its main task is to almost instantly reduce the speed of the person in the cabin. Thanks to this, during an accident you can avoid traumatic impacts and save the life of the driver or passenger.

How to glue the lid

When assembling, the cover can be glued with any available glue, for example, the “Moment” type. After this, the glove compartment lid works normally. In total, repairs will require 100-140 rubles, and you’re done!

Of course, buying a new part in a store is easier and faster. But there are no separate brackets on sale, so buying a completely new glove compartment is expensive. If the Lada Granta is still under warranty, you can contact the dealer for a replacement. If the warranty period has expired, then you can do everything yourself.

I forgot to say that instead of superglue, you can use a special compound for gluing plastic. It is made from dichloroethane. When it is applied to a surface, it dissolves, and when the parts are compressed, the plastic mixes with each other. The result is high strength. But you don’t have to use it, I just remembered.

How did you repair the glove compartment, write in the comments. What else have you broken from plastic elements?