Roof rack for Lada Kalina station wagon

Published: December 29, 2015

Rating:

Tags:Roof rackVAZ Kalina

Lada Kalina is a family car, which means that additional space for carrying luggage will not harm it at all. For such purposes, a roof is used, on which an additional trunk is installed. There are two types of such structures - ready-made ones, which are sold in car dealerships, and those made by hand. In this article we will talk about how to properly make and install a roof rack on your car.

Ready-made roof racks are perfect for car enthusiasts who want to save time and effort on making a roof rack, or for those who are not very confident in their abilities and are unlikely to cope with the task. One of the most important issues is the choice of this design.

How to choose the right trunk

The roof rack for the Lada Kalina is a fairly simple design. It consists of a crossbar and a support post. The kit includes a set of clamps, fastenings, as well as containers for transporting goods. When choosing such a part, you should understand that after installation:

the dimensions of the car will increase in height;
Extraneous noise may appear during fast driving;
the trunk can get caught on low-growing branches.

However, with its help you will significantly increase the area for transporting goods. Some motorists prefer rear racks because they are more compact and less noisy. But there are also significant disadvantages:

overload of the rear of the machine;
headlight overlap;
overhang extension.

Rules for the carriage of goods

In order to correctly calculate the acceptable dimensions of luggage structures, you should know the maximum carrying capacity of the vehicle. Under no circumstances should you overload the trunk

, because he too has his limit. It describes in detail how to replace the timing belt on a Lada Kalina or Granta car with an 8-valve engine. Each model has its own dimensions, which are superimposed on the dimensions of the cargo being transported.

This point is very important, since, according to traffic rules, luggage can be wider than the structure by a maximum of 2.5 m, and longer - up to 2 m. In the case of transporting cargo that is more than 1 m in width and more than 0.5 m in width length overlaps the side lights, it should be remembered that special identification marks will be needed. There is a list of items prohibited for transportation.

Installing boot on Kalina

What are the features of the trunk on Kalina? On a car like a Lada

, doesn't accelerate much, but you can pick up the family and leave town. However, this car is not very roomy, so for many the question of an additional trunk for Kalina becomes relevant. In this case, you need to take into account all factors: the body of the car, what type of cargo to transport, what kind of design the owner of the car wants to see.

Installation of an additional trunk

Installing a roof rack on a Lada Kalina can be done using two methods. The first involves the use of roof rails, which are first fixed to the body, after which crossbars are mounted on them. The second method is to install the trunk “under the door”, in which case the supports cling to the doorway.

Roof rack

Most car owners prefer a railing system because it makes it possible to adjust the distance between the crossbars. Also in this case, it is possible to install as many transverse elements as necessary for the transportation of small-sized cargo without additional containers.

It is important to know! To protect such structures from theft, it is better to choose models in which the support fasteners can be locked with a key.

Another issue that needs to be resolved before installing a roof rack on the Lada Kalina is the use of hinged structures. The choice of rack mounts depends on this. For example, if the installation was carried out “under the door,” then a flooring should be mounted on the crossbars, since without it it will be impossible to transport large loads.

Lada Kalina Station wagon "First" › Logbook › Connection diagram for the electric drive of the trunk lock

Yesterday I decided to tighten up the hardware for the upcoming work on connecting the electric drive for the trunk door lock and outline the scope of work. Previously, I found the locations in the car: - connector for connecting the electric drive in the trunk door - glass control unit (BUS) and the wire connected to it from the electric drive connector (red-pink), through which a 12V control signal is supplied from the standard alarm - placement of the alarm module with an outgoing gray wire for connecting an additional control channel for opening the trunk from the key fob.

On the Internet I found many examples and accessible diagrams of connection diagrams from a simple one - a button, to a more intricate one - a button / standard (factory) alarm / additional (non-standard) alarm.

Since I don’t have a key with a remote control and don’t want to buy it, there is no point in using the control signal from the standard alarm. Connection diagram if I had a key with a remote control:

This means there will definitely be a button in the cabin to open the trunk and you need to connect and configure an additional channel on the installed alarm. Now the question arises, what signal does the alarm give? Positive or negative? Fortunately, I found a diagram from which I can safely draw a negative conclusion!

Then my general connection diagram should look like this:

As can be seen from the diagram using a 4-pin relay, I connect pin 30 to the red-pink wire, before that I will separate it from the BSU (maybe I’ll make male-female terminals in case the connection is quickly restored). It is necessary to apply mains voltage to contacts 87 and 85; I will build a 10A fuse in the circuit in front of them. A wire from the button from pin 1 goes to pin 86; it will carry a negative signal (ground).

From the operation of this relay, we find that when a minus is applied to contact 86 of the coil winding, it closes to contact 85. An electric magnetic field is formed that closes contact 87 to contact 30. The circuit should work and the electric drive will release the lock.

Now about the button in the cabin. Contacts 3 and 1 are constantly closed, which means that the signal from the alarm unit will by default pass through the button to the electric drive circuit if you press the key fob button.

When you press the button in the cabin, contacts 3 and 1 open, and 1 and 2 close. The mass is supplied to the electric drive circuit.

If I had a key with a remote control, I would use a 5-pin relay in the circuit. Here an additional contact 87a appears, which is constantly closed to contact 30. This way you can maintain the connection of the standard circuit and break it when using a signal from a button in the cabin or from the alarm key fob. That is, when a signal is applied to the relay coil, contacts 87a and 30 will open, and contacts 87 and 30 will close. Management will be carried out as in the previous scheme.

If the writing is not boring and someone has thoughts or advice, write)

And may the electrical gurus forgive me. I'm just a novice at this

Source

Algorithm of actions during installation

We will describe the process of installing a trunk on your car:

First you need to open your car door;
After this you will need to remove the rubber seal. This should be done from the back door to the front;
Then you should open the mounting holes, which are sealed with electrical tape;
After this, you can begin the fitting installation of roof rails on the Lada Kalina. After installing the structure, you should mark with a marker the places for installing brackets and plastic fairings;
When the marking is completed, you need to remove the roof rails;
According to the finished markings, the contact area between the roof and the trunk should be degreased with alcohol, after which it should be treated with an adhesion activator. This can be done with a simple napkin;
If during the trial installation you notice that the brackets do not fit tightly to the mounting area on the body, then it needs to be taped with double-sided tape. All mounting holes that are not useful must be sealed with electrical tape;
Now you need to remove small fragments of the protective coating from the double-sided tape that is glued to the plastic fairings and bend them outward;
After this, you can install the roof rails on the Lada Kalina, but the bolts should not be tightened tightly;
Then you should install the fairings;
Now you need to carefully grasp the folded edges of the double-sided tape and remove the protective layer. This should be done along the contour of the fairings;
After this, it is necessary to tightly tighten the front mounting bolt, followed by the rear one;
By pressing firmly from above, you should finally fix the fairings, and then press the edges;
At the end, you need to put the seal in place, inspect the results of the work done and erase the markings.

Renault Symbol automatic 98 horsepower › Logbook › Broken trunk lock wire. I fix it myself

One sunny spring day I arrived at the store, clicked “close” on the key fob and... the car flashed the emergency lights without any sound of the locks closing...

I thought it was some kind of glitch and it would go away. but no. Having bought some nonsense in the store, I try to open the trunk... it’s locked - all the doors are open - but the trunk is not there.

What didn't I think of. and the trunk lock burned out, and the central locking broke... and so on and so forth.

I called the service: they said that it costs 500 rubles to open the trunk, and then separately search and fix the problem. At that moment, the toad had a strong grip and strangled me... I decided to open it myself: reclining the back of the back sofa, pulling everything out of the trunk, I completely climbed in there. It's funny - it turns out you can fit in there quite well))))

I unscrewed one nut and the trunk opened.

I started to find out what was going on. The first thing that caught my eye was a blown fuse for the central locking ==> it means there is a short somewhere.

I plugged in the fuse for the wipers, disconnected the terminal from the trunk lock - the central locking works.

I connected the terminal back, poked the central locking button several times: the instrument and interior lighting dimmed. and click! The fuse blows again.

Climbing around the trunk, I found the break point - under the very rear shelf near the rubber band.

Unfortunately, there is a very thin two-core wire going to the trunk lock, which simply frayed when opening and closing. More precisely, one core was frayed. Most often this happens in winter - the wire becomes dull and breaks.

The wire broke off in the most inconvenient place - right under the shelf. The wire protruding from the interior is not long enough for twisting. I had to make an insert. Using a household electrical cable, connect the wire from the trunk to the wire from the central locking system.

1. 0.3 meters of two-core copper electrical cable with a cross-section of 1 mm.2. 6 heat shrink tubes: 4 thin and 2 thick.

1. bit off the broken end of the wire in the trunk2. removed the rear parcel shelf trim 3. pulled the broken wire4 into the cabin. I stripped the ends of each wire on the wire from the lock and on the wire from TsZ.5. I stripped the wire strands for insertion, on both sides.6 a thick tube is put on the wire for insertion, and a thin tube is put on each wire individually.7. I twisted the wires and put a thin heat-shrink tube in place of each twist. and heated the pipe with a lighter.8. when both wires are sealed into a tube, a thick tube is pulled over them and heated again.9. I inserted the extended wire into the trunk and again repeated the twisting of the cores of the spacer cable with the wire from the lock.

source

DIY roof rack

Before starting work, you should clearly determine the dimensions of the roof rack for the Lada Kalina car. The dimensions of the roof rails must correspond to the length and width of the roof. As for the height, it all depends on you, since this parameter is not that important. Once you have decided on the dimensions, you need to cut the pipes to the required length. The number of crossbars varies from 2 to 4. The support must be at least 8 points in order to evenly distribute the load on the roof and prevent it from bending. It is better to start the production of such a part as a roof rack for a Lada Kalina from the lower base.

Bottom base

This operation requires some welding skills, so if you have no welding experience, it’s better to start by practicing a little on unnecessary material. The seams that are used to weld the lower base of the Lada Kalina roof rack are quite simple, so the technique for processing them can be mastered in a few hours.

First you need to prepare a flat surface. The ideal option would be a metal table; in the absence of one, you can use several metal stands. Wooden surfaces will not help here, since sparks generated during welding can ignite the surface;
Now you need to weld the trunk. If burnouts occur, all work will have to start all over again, since such damage significantly reduces the strength of the trunk;
After welding, the seams must be thoroughly sanded.

Preparing the lower base for the trunk
Upper base

This element of the Lada Kalina roof rack must be made in strict accordance with the dimensions of the lower part.

It is important to know! Even small deviations and inconsistencies will lead to noticeable distortion of the entire structure.

Using jumpers, you need to connect both elements of the trunk. Here you can go in two ways: tightly fasten them by welding or leave the upper part removable so that you can use the lower one as a platform. After this, you need to sand the resulting seams and start painting the additional trunk. Its color scheme is up to you to determine, but matte black or metallic silver is recommended. The crossbars must be thoroughly cleaned of rust and degreased. The primer on the trunk must be applied in several layers, since these elements constantly rub.

Shaping the appearance of the trunk

It is important to know! If you plan to constantly use the trunk, it is worth installing reverse lights, brake lights and side lights in it. All of this equipment will require additional holes as well as wiring to connect to the vehicle's electronics.

Why is it worth ordering a trunk for a Lada Kalina car in our store?

Our company offers a large selection of car racks for passenger cars of different brands and models (including Lada Cross and Granta), for different body types - sedan, station wagon, hatchback, for different generations (1st, 2nd, etc. .d.). All models offered on the website are always in stock. The assortment is constantly replenished and expanded.

We hold promotions and sales during which prices on many products are reduced. The best cooperation programs are provided for regular customers.

You can place an order with us with delivery throughout Moscow and the region (or you can come pick up the goods yourself). We also deliver orders to other regions using transport companies. You can find out how much delivery costs from the managers. The cost depends on the distance and amount of purchase.

Installing an additional trunk

The last stage is the installation of the trunk on the Lada station wagon. The biggest difficulty you will encounter during this procedure is the manufacture of fasteners, since suitable ones may simply not be available for sale. It is necessary to use two bolts with nuts for each of the fasteners and the same number of tubes with the same diameter as the bolts. Installation is carried out in the same way as in the case of a ready-made trunk for Kalina station wagon. The main thing to remember is that the trunk should not cause damage to the car, so it is better to play it safe and install rubber gaskets at the mounting points.

Installing a roof rack

Rules for the carriage of goods

To correctly calculate the permissible dimensions of luggage structures, you need to know the maximum carrying capacity of the vehicle. Under no circumstances can you overload the trunk because it has a limit. Each model has its own dimensions, which are imposed on the size of the cargo being transported.

This point is very important because according to traffic regulations, luggage can be wider than the design by a maximum of 2.5 m, and longer. up to 2 m. In the case of a load whose size is more than 1 m in width and more than 0.5 m in length and covers the parking lights, it should be remembered that special identification signs are required. There is a list of prohibited items for transportation.

You may not carry luggage that could interfere with the survey or interfere with normal driving. In addition, the sedan must have open license plates and lighting fixtures. For flammable materials such as gas cylinders or fuel tanks, you will need to have a special export permit.

Alas, modern drivers do not burden themselves with such trifles, which is why emergency situations have occurred on the roads more than once. Each load can be corrected, as it will be convenient for the owner, the main thing. remember the rules of the road. When transporting luggage, the driver must be vigilant and monitor it.

In the event of a load falling and causing an accident on the road, the driver himself will be held responsible. But you should know that if an accident occurs because the trunk latch is broken, and the inspection proves the product to be unscrupulous, then the manufacturer must bear all the costs.

Costs and benefits

Among most car owners, there is an opinion that the manufacture and installation of such an element as a roof rack for a Lada Kalina station wagon is a troublesome and time-consuming task. However, in essence, two to three days will be enough to complete all the necessary operations. All actions are quite simple and do not require professional equipment or high qualifications.

In addition to the fact that the Lada Kalina station wagon roof rack allows you to transport much more cargo, it can also significantly change the exterior of your car. The presence of steel crossbars for the additional trunk can be the final chord in the composition of the Lada Kalina station wagon.

Author: Ekaterina

4 comments

Gordey says:
I want to install a roof rack on a Lada Granta car - roof rails with crossbars. I have two questions about this - firstly, does water leak in and dust gets into the installation areas, and secondly, does it hum at speed?
May says:
A regular trunk will hum and whistle when you accelerate - so it's better to buy aerodynamic bars. They behave quite normally at speed - the aerodynamics are fine and there are no unnecessary sounds.
Gordey says:
What about the gaps? I'm afraid there will be incredible dirt in the fastening places and it will definitely rust - in any rain it will get wet and you'll have trouble.
Ekaterina says:
Good afternoon. To avoid extraneous noise at high speed, purchase an aerodynamic design - this is exactly what it is designed for. And in order not to be afraid of corrosion, glue the gaps with armored film.

Types of car tires, tips for choosing

Trunking. A fairly simple design that consists of support posts and cross beams. It comes complete with special fasteners and boxes for transporting cargo. On a sedan, the trunk can be installed not only on top, but also on the rear. But the first option can be found much more often than the second.

As for the roof rack on the Lada Kalina, despite its spaciousness, it occupies a fairly large area of the car. In addition, driving at high speeds will be accompanied by strong noise, and if the sedan is moving through the forest, then the structure in question will definitely pass through all the lower branches. Of course, compact models do not have these disadvantages, although they do contribute to a longer overhang, which can lead to overloading the rear of the machine.

If the Lada Kalina sedan is equipped with a top model, it would be a good idea to install a luggage box that looks like a streamlined plastic box. If desired, this design can be installed on the rear doors. Using Lada Kalina luggage boxes has several advantages.

This design has a shape that promotes excellent aerodynamics. And this, in turn, contributes to a quiet ride at high speeds.
If the car is moving through the forest, the smooth surface prevents branches from clinging to the trunk.

The volume of such adaptation allows you to replace a suitcase by placing all your hand luggage there.
Plastic. material that is not afraid of moisture, then transporting luggage in rainy weather does not threaten things.
The box is protected in the form of a lock, so the cargo will always be undamaged.
The appearance of the structure is quite presentable.

But the design in question has its drawbacks. Firstly, it is large in size. If the driver does not have a garage, then it will take up a lot of space in the apartment. Secondly, if the box is not removed from the car, but it is empty, fuel consumption will increase significantly.

Characteristics of car racks for Kalina

Aluminum and composite materials are used to manufacture devices. Their surface is coated with a polymer that is resistant to road chemicals and also provides effective protection against rust. These devices are inexpensive and at the same time reliable and of high quality. They are perfect for the Lada Kalina station wagon, adapted for Russian conditions, and can be used at air temperatures from -50 to +50 °C.

Lux type trunk

These systems have increased strength, which allows Russian motorists to use Lux racks even in off-road conditions. The design of the product includes two aerodynamic arches, which are also cross members. They are fixed to the roof of the car using racks. The device can be mounted on a roof rail or a smooth roof of a car.

In the manufacture of arcs, aluminum alloy subjected to heat treatment is used. Additional strength of the alloy is provided due to the temperature effect on it. The device assumes the presence of partitions inside, serving as stiffeners. Every detail of the product is processed by anodizing. This is necessary for the device to withstand an aggressive environment.

A product from the Lux company for transporting goods on a Kalina station wagon has versatility, achieved through the use of an adapter when installing the device on the roof of a car. The steel from which it is made has a special elastic coating - vinyl acetate. It is created using plastic and helps to preserve the paint layer of the car in the places where the product is attached to the body.

This type of coating has high adhesion to metal parts of the trunk. The shape of the adapters is maintained even under conditions of intensive and prolonged use and does not become rusty. The kit includes special rubber gaskets. Thanks to their presence, the device fits tightly to the body. They do not deform even under heavy loads.

Amos type rack

Amos racks, mounted on the roof of the Lada Kalina station wagon, are a system of beams with fasteners. They can be installed in a specific regular place. The trunk bar is made of aluminum alloy, which is subjected to special heat treatment, which gives the part increased strength characteristics.

The trunk arches are reliably protected from UV radiation and aggressive environments. Thanks to the special design of the diameter, the reliability of the device is increased and the characteristic noise that occurs when the car is moving at high speed is reduced.

What is important is the special design shape of the Amos device, which makes it possible to install additional accessories

Atlant type luggage rack

Manufacturers identify ten main reasons that confirm the need to install the Atlant car rack on the roof of a Lada Kalina station wagon.

Safe operation. Luggage racks are tested and tested for compliance with European standards.
Application of modern materials used in the production process.
Easy installation of the Atlant car rack. The rubber seals used are able to securely fix the powerful bracket.
The product has a modular design that allows for quick assembly and installation of the device.
The models are delivered fully assembled, so their installation takes a few minutes.
The Atlant luggage rack is suitable for transporting all kinds of cargo.
Aerodynamic properties ensure minimal noise level while the machine is moving.
The design of the Atlant trunk follows automotive trends, so the trunk and the car will look like one.
The product has increased dirt and dust resistance.
Rear rack models are characterized by the least noise. You can drive off-road with them. However, the rear of the vehicle may be overloaded. If the standard lights are covered by the rear trunk, additional lighting fixtures are installed.

Comparing models

Since the truth can be born in the process of comparison, further in our review we should indulge in drawing some parallels. When starting a conversation about Kalina in the newer generation, it should be noted that in terms of the volume of space in the trunk, the hatchback is not able to impress with the impressive volume of the compartment. The Lada Kalina station wagon turned out to be much more spacious, where the developers tried to make it as spacious as possible in order to be able to compete with its classmates in the subcompact segment.

Let us remind you that the hatchback has a luggage volume of a modest 240 liters. This figure was determined by the manufacturer taking into account the space up to the rear parcel shelf. When the need arises to increase the volume, the designated shelf can be dismantled with your own hands. This helps when transporting large luggage. If the owners are not satisfied with this situation, then the luggage compartment is transformed by folding the backrests, and the dimensions and dimensions of the luggage compartment are 550 liters.

There is a category of owners who, due to their occupation, need to transport larger items. Here we recommend taking a closer look at the station wagon, because in terms of free space in the trunk, this body modification holds sole leadership. Its 670 liters of volume will be quite enough to satisfy the needs of even the most picky owners.

If the future owner of Kalina prefers a hatchback, then it makes sense to consider in more detail the capabilities of its trunk, and how much it will lose to a station wagon, what dimensions and dimensions of the trunk it has. We arm ourselves with a tape measure and begin to measure the sizes of openings, lengths and heights that interest us.

The height of the compartment reaches 82 cm (to the ceiling), and to the shelf level - 49.2 cm.
The depth of the trunk with the rear row folded is 131.9 cm, and the distance from the same starting point of the compartment to the front panel is characterized by 220 cm. With the row not folded, the depth is 64.4 cm.
We denote the width inside the compartment by two parameters: between the wheel arches - 947 cm and between the rear wings (in front of the arches) - 127.7 cm.
Having succumbed to simple calculations, we determine that the maximum possible volume of space has reached approximately 1 m³, which in terms of liters is 1000 units. The manufacturer notes this value at 550 liters, but it can be loaded to the ceiling.

Dimensions value

The Kalina family is small but friendly. Some are a little bigger, some are a little smaller, but together they can make it to the parade. The body of the Lada Kalina is made in several modern modifications: sedan, hatchback, station wagon, cross and sport. Their overall dimensions do not vary much.

Sedan	Hatchback	Station wagon	Cross	Sport
Length, mm	4040	3850	4040	4104	3943
Width, mm	1700	1700	1700	1700	1700
Height	1500	1500	1500	1560	1450
Weight	1098	1098	1128	1125	1150
Base	2476	2476	2476	2476	2476
Clearance	160	160	145-160	183	150

The width and wheelbase are the same for all, as it should be for related models. But the length, height and ground clearance are different. Accordingly, the volumes and masses are different. The history of Lada models has seen long stagnation and a period of failure. In 2004, the release of the first Kalina from the assembly line ushered in a new era. Since then, new items appear almost every season, and the ranks of owners of the most popular car in Russia are growing from year to year.

The geometric dimensions of the body are important, but no less interesting is the volume of the trunk. All Kalina models are designed to allow the rear seats to be folded forward and increase luggage compartment space. The most voluminous trunks are for the sedan, station wagon and cross: 355/670 liters. “Hatchback” and “sport” are more modest - 240/550 hp. It’s also not bad, as many city car owners will agree with.

In the ranks of Kalina there is another model - Lada Kalina City (Oka-3), made on the VAZ-1117 platform. It appeared in 2005 and for some time was considered a replacement for the Oka small car, but this assumption is incorrect. It has almost the same dimensions, height and width as other Kalinas, only the length is 3650 mm. The result was a version of the Kalina hatchback, shortened by 20 cm and correspondingly lighter in weight - 980 kg. Next to the miniature Oka it looks incomparably larger. "Kalina City" is not widely used, but it can still be found on Russian roads.

Video.

https://youtube.com/watch?v=JPpZ6ceXUzI

The camshaft drive mechanism on the VAZ 2106 and all other auxiliary devices is carried out through a chain drive. The chain needs to be tightened periodically. The tension of the chain occurs due to the tensioner, which with its rod presses on the tensioner shoe and thereby tightens the chain.

And so, in order to tighten the camshaft drive chain of a VAZ 2106 car, you need to:

The first step is to remove the cylinder head cover.
Now press your thumb onto the chain and approximately determine the amount of its movement.
Unscrew the cap nut about half a turn and at the same time you should hear the tensioner shoe move out of place, if the shoe does not move, then lightly hit the tensioner with a hammer, try to move the tensioner plunger, if the shoe does not move even after that, Then unscrew the tensioner mounting nuts and pull it out a little, move the plunger with a suitable metal rod or screwdriver and install the tensioner back.
Rotate the crankshaft slightly until resistance to turning begins, but do not allow the crankshaft to kick back in the opposite direction.
After you have cranked the crankshaft, the chain will tighten itself, meaning you don’t need to do anything else.
Tighten the tensioner cap nut and install all removed parts in the reverse order of removal.

If you begin to notice that knocking and grinding noises have appeared in the engine compartment of the car, then there is a weakening of the timing chain. As a result, it begins to hit the shoe and the damper. In this article we will look at how to tension a chain on a VAZ-2106 with your own hands.

Luggage compartment size comparison

DIY trunk: how to make an expedition model. instructions for building a roof rack (110 photos + video)

You can make a comparative description of the size of the luggage compartment of all Lada Kalina models:

Lada Kalina hatchback is one of the most popular VAZ models, however, the size of the luggage compartment of this model is relatively small, only 240 liters

When calculating this parameter, the space upstream of the luggage rack is taken into account. However, if desired, hatchback owners can dismantle the shelf themselves, and with the seats folded, the trunk size increases to 550 liters

The ground clearance of the model with an automatic transmission is 145 mm, and with a manual transmission it is 165 mm. The VAZ station wagon is equipped with a more spacious luggage compartment, the size of which is 335 liters. If you need to increase the size of the trunk to 670 liters, then the rear seats simply fold down, and the transformation is carried out without any effort. An empty car of this model has a ground clearance of 145 mm.

If car owners put their “four-wheeled iron friend” on wheels of the required size, the ground clearance will certainly change. According to experienced drivers, it is best to install wheels of 14 or 15 inches in size on the Lada Kalina.

The Lada Kalina Cross has the same luggage compartment dimensions as the station wagon, that is, the luggage compartment size is 335 liters. With the rear seats folded down, the trunk volume reaches 670 liters. However, this model has increased ground clearance to 208 mm, which is very good for a compact car, the length of which is just over 4 meters.
The Lada Kalina sedan has almost the same technical characteristics as the other models that we analyzed above. The main difference between this model is a different body style, called a “sedan”. The luggage compartment volume is slightly larger than that of the hatchback - 400 liters, and this size is quite enough for transporting small loads or bags of food. That is, this model is simply ideal for moving around the city, because thanks to its low weight and excellent maneuverability, the Kalina sedan performs well on busy city streets and takes off easily. And if necessary, sedan owners can easily fold down the rear seats to further increase the size of the luggage compartment.

To summarize, we can say that hatchback models are equipped with an insufficient luggage compartment size, which many car owners would like to see.

But the Kalina station wagon and Lada Cross have a much larger luggage compartment, which has a several times increased service life. But if a hatchback is more preferable for car owners, then you should not deny yourself the desire to buy this particular model. After all, if the reason for the failure is the insufficient size of the trunk, then this problem can be solved, as previously said, quite simply - by folding the rear seats of the car, which will help increase the volume of the luggage compartment to 50 liters.

However, it is worth noting that if the driver plans to transport bulky things in a new car, for example, to a country house, then it is better to opt for a station wagon or cross-country vehicle. After all, a maneuverable and compact hatchback is simply not able to cope with such tasks at the proper level due to its technical characteristics.