It is difficult to imagine a modern car without an on-board computer (alternative names: “BC”, “carputer”, “onborder”), which allows you to increase engine efficiency, reduce gasoline consumption, optimize the operation of the gas distribution system and synchronize the interaction of all units. In addition to the above, BC reduces the concentration of harmful emissions. The onborder performs the functions of cruise control, climate control, and displays the information necessary for the driver, allowing him to make the right decisions on transport management and optimal movement along the chosen route. That is why all modern Lada Vesta models are equipped with BCs that successfully perform the functions assigned to them.
Description
The on-board computer State MK-1 is designed for cars of the Lada Vesta and Xray family.
Connection settings are not required.
A specialist for installation is not required.
Engine overheating indicator above 115C - buzzer.
Error code scanner - creeping line.
Erasing error codes - in the engine ECU and manual transmission.
Indication modes - ring: speed - temperature / speed - engine temperature - fuel level - battery voltage - running line of error codes - speed.
SPEED* – digital display, allows you to accurately maintain speed, not receive fines and not be a hindrance to other road users.
ENGINE TEMPERATURE* – for those who are careful about the car engine and the environment, the BC accurately displays the engine temperature from -45C, which allows you to control its warming up and operating mode.
TEMPERATURE/SPEED – if the car is stationary, the engine temperature is displayed, if it is moving, the speed is displayed.
FUEL LEVEL* – shows the remaining fuel in numbers, no need to puzzle over what these cubes mean...
BATTERY VOLTAGE – for lovers of loud music, allows you to control the amount of electricity in the battery.
ERROR CODE SCANNER – for those whose check engine light has come on. We read the error, tell the smartphone: “Siri (Alice), Peh error zero one zero one Lada Vesta”** and read articles about what it is, why it happened and how far you can go. If the malfunction was accidental or eliminated, the lamp can be extinguished by long touching the sensor.
* Parameters are obtained from the vehicle information bus; the accuracy of the readings is affected by the size of the wheels, the condition of the wiring, engine temperature sensors and fuel level.
Instructions for use and installation guide are available in the Documentation tab.
The product has been returned for sale, the manufacturer has made the following modifications:
Version 1_14 from 01/15/20 Fixed: - display backlight when the ignition is off; -delay of speed readings in multiplex mode (temperature/speed). Changed, added: -start-up based on the operation of the ECM (it was based on engine speed); - shutdown due to ECM operation (it was due to CAN bus activity); -reading and erasing errors when the engine was not running (this was only possible when the engine was running); -the damper for fuel level and voltage readings has been increased to 180 sec.
Version 1_17 from 05/19/20 1. Improved operation of the BC when waking up from the ignition 2. Added two-stage brightness adjustment. To adjust the brightness, hold the sensor for a long time until the brightness changes and a sound signal is heard in one of the menus TEMPERATURE, TEMPERATURE/SPEED, FUEL LEVEL, BS VOLTAGE.
Version 1_20 from 06/01/20 1. Reading the fuel level has been accelerated.
Attention! The video and installation instructions show an on-board computer in an old case. Currently, the on-board computer comes in a case like the one in the photo.
Source
Setting up and operating a car computer
The standard BC and display reflecting the necessary information turn on simultaneously with turning the ignition key. The computer is controlled and configured using two buttons located at the end of the switch to the right of the steering wheel (Fig. 1). By pressing the buttons simultaneously, you can adjust the time, route mileage, reset the readings, and perform other actions.
To set the clock, you need to press the top key and hold it for a while. By briefly pressing, you can scroll through the menu, selecting the desired options, and update the readings. The first section shows the total mileage along the route, the second shows the time (hours and minutes), the third tells you which gear to switch to, and so on, in accordance with the list above. You can exit the menu at any time by pressing the bottom key.
There is also a secret menu in the bookmaker, which is not in the manual. You can get into it by pressing both buttons. In these options, you can change the level and tone of the turn signal or hazard warning signal: to increase the sound, you need to press the upper button, to decrease it, press the lower button. When you hold down both keys on the SET inscription, the settings will return to their normal position.
Despite all the advantages of a standard on-board computer, it also has disadvantages: firstly, there is no information about emerging malfunctions or error codes, and secondly, the weak contrast of the information displayed on the display makes it difficult to read in bright sunlight.
Computer on-board staff vesta x ray
Description
“Anti-COVID-19: laminated packaging, can withstand repeated treatment with any antiseptic”
Connection settings are not required.
A specialist for installation is not required.
Engine overheating indicator above 115C - buzzer.
Error code scanner - creeping line.
Erasing error codes - in the engine ECU and manual transmission.
Indication modes - ring: speed - temperature / speed - engine temperature - fuel level - battery voltage - running line of error codes - speed.
Parameters of the standard Lada Vesta onboarder
Depending on the model, the Lada Vesta on-board computer can perform a wide variety of functions and display relevant information on the screen display. In the standard version, the monitor displays:
- total vehicle mileage in kilometers;
- distance in kilometers traveled by the car in one trip;
- Digital Watch;
- travel time: hours, minutes;
- speed in kilometers per hour;
- recommendations for gear shifting;
- voltage in the on-board network in volts;
- current fuel consumption in liters per 100 kilometers;
- fuel consumption per trip in liters per 100 kilometers;
- fuel costs per trip in liters;
- indicator of how many kilometers of fuel remain;
- number of the included gear;
- speed limit indicator;
- outside air temperature.
State MK 1, take ELM 327. March 12, 2022.
Greetings to the subscribers of our newsletter Lunar SWet!
Today I’ll tell you about the on-board computer State MK 1, for Lada Vesta and X-Ray cars. And at the end of the story you will find a video review of his work.
Since purchasing the Vesta, I have been thinking about choosing an on-board computer. Mostly for monitoring the engine temperature and resetting errors if any appear.
After looking at several options, I decided to go with the on-board computer from the State company.
Previously, both grants had the staff bk x 1g. It has proven itself only on the positive side, functional, compact and has a lot of functions and advantages.
As an option, you could purchase an ELM adapter, from the well-known Ali Express, but I considered it a disadvantage to connect constantly for the sake of temperature readings. And with staff, a monitor with readings will always be at hand.
So, let's look at its functionality.
When first connected to the diagnostic connector and with the engine running, the on-board computer MK1 displays the current engine temperature.
Touch control, when you touch the top part above the monitor, the staff switches to another mode. When the car is not moving, it shows the temperature. And while driving, speed. This function is determined by a dot in the lower right corner of the screen.
The next touch on the top of the case, and the monitor shows the remaining fuel in the tank in numbers. That is, not as we see on the dashboard, with an arrow, but precisely the remainder in numbers. I find this very convenient.
The next switch shows the voltage of the vehicle's on-board network. There is a slight difference between the dashboard readings and the state readings. I think this has something to do with consumers. The readings on the dashboard are lower, since the voltage is taken by consumers, the stove, the light, etc. The staff shows real tension. The data is taken, possibly from the generator. Correct me if I'm wrong!
The next switch and we find ourselves in the error section. Here you can not only see exactly what errors the computer sees, but also reset it by long pressing the sensor. The staff did not find any errors, which means everything is in order.
Easy installation. But of course there was a mismatch with the functionality. The grants had more expanded functionality in the state. Average speed, fuel consumption, amount of gasoline consumed. Perhaps this is due to the fact that Vesta already has all this in the on-board readings on the dashboard.
Reviews
I installed it on a Duster 2.0 with a manual, it very accurately measures the remaining fuel - when I refuel from the card, I need to accurately order the number of liters. Option with suction cups - holds perfectly from mid-May, does not shake. doesn't jump. I installed it myself in 15 minutes - I like to route the wires neatly.
Tell me, is it visible in the sun? I had a Vesta with MK1 red - so in the summer the light was very weak.
The indicator is green, behind a 70% light filter, visible in any weather, in any sun, contrasting, non-tiring, at night the brightness automatically decreases
I have a Lada Largus FL, everything works fine - both Tropic and Fast and Furious, I couldn’t test only the Plasmer due to the summer.
Burkhanov Maxim – 07/13/2021
They laid the wires from the heart, you don’t know what to do with the waste, a meter would be enough, but they give you 2.5. The promised ties for excess are not included in the kit, apparently they were “optimized”, like the error codes that were on the X1G - we don’t care, if your phone suddenly dies, print it yourself. There is a touch sensor on the BC, but its exact location is nowhere to be found, neither in the instructions nor on the website. I myself realized at random that the right end of the device is sensitive, but not the screen! (by the way, huge) Green lighting, which does not at all suit the red wells of Vesta Cross. Like I don’t even know
Thank you very much for your criticism. 1. Universal wires - tomorrow you will want to put them up under the visor, but here it is as a spare. 2. Regarding the screeds, thanks for the note. A couple of wires in isolation? 3. The sensor is on the side of the case, it seems they wrote, okay, let’s take a picture.. 4. The error codes make a hefty book, there are also transmission codes, it’s expensive, inconvenient, I feel sorry for the trees. Maybe make an application if there is no connection? 5. The red indicator, alas, in the available version is not visible during the day, but the Chinese make a bright one to order from 2000 pieces. There was an idea to put white ones and put a set of light filters in the kit, but it didn’t take root. The Yeti we drive at school is white with 90% tint. Again applications 1:20 to green.
Good afternoon When will it be known whether the tropic function works on the west with n4m? Thank you
Source
On-board computers Multitronics
One of the first companies to release BC for Lada XRAY. Currently, their website offers several models costing from 5,050 to 9,800 rubles.
Multitronics TC 740
Installed in place of the round air duct. On the Lada XRAY they have a different shape, so you will have to find a different placement for the BC.
Attached to the dashboard.
Multitronics TC 750
Attaches to the windshield.
Attached to the dashboard.
Works together with mobile and head devices running the Android operating system and with a Bluetooth communication module.
Attached to the dashboard. The most modern BC model.
The most affordable BC model. All parameters work on the Lada XRAY, including turning on the fan at a certain temperature. Only protocol should be selected M74CAN.
Other bookmakers
Inexpensive Chinese on-board computers that are suitable for Lada XRAY:
Both BCs are connected to the OBD-II connector. You can find them in the catalog of popular products from Aliexpress.
Which bookmaker for Lada XRAY did you choose?
Let us remind you that another popular accessory is a DVR. We talked about how to connect it to the Lada XRAY earlier.
Share on social networks:
Found an error? Select it and press Ctrl+Enter..
