The Lada Granta is equipped with a standard BC built into the instrument panel, but its functionality is frankly weak, and therefore does not suit the owners. Car enthusiasts consider the main disadvantage to be the lack of an engine temperature sensor. That is why many people prefer to install alternative on-board computers that are capable of demonstrating current temperature readings and many other parameters of the operation of all car systems.
Basic functions of the device
On-board vehicles for the Lada Granta have high information memory and a small monitor, except for the “State” model, which only has a digital display. This makes it easier for people with poor eyesight and those who are unfamiliar with the nuances of engine operation to monitor all the processes that accompany its stable operation. BC will help the car owner by pointing out the following parameters:
- total travel time;
- detailed fuel consumption at different speeds;
- average speed indicators and excessive fuel consumption;
- remaining fuel in the gas tank;
- speed of start of movement;
- engine temperature;
- malfunctions of components and mechanisms;
- temperature inside and outside the car;
- on-board network voltage;
- crankshaft rotation speed (engine speed).
The on-board computer has a volatile memory and the ability to control the anti-theft system - the Lada Granta immobilizer. The on-board vehicle has a built-in supervisor, a fault indicator, and a “afterburner” function - the ability to reset the memory after starting the engine.
The functionality of even the simplest on-board computer is much broader than the standard one installed on the Grant. The discrepancy between the readings of the factory and alternative devices can reach more than 30%.
Some on-board drivers can additionally control lighting, stove operation, clock, calendar and alarm clock, and automatic window closers. You can plan your trip route based on the BC readings. It also allows you to use various navigation installation options and can warn you about low fuel levels or exceeding the permissible speed limit.
Most devices allow you to independently diagnose the operation of different car systems. The device can read ECU error codes without using any equipment. The explanation is presented in the accompanying documentation for each device. Such functionality will allow you not only to save on a trip to a specialized center, but also to identify problems, preventing serious malfunctions from occurring.
Versatile alternative
You can install other models of devices on the Lada VAZ 2190 car. A good alternative in this regard would be the Multitronics router. Various types of device housing allow it to be installed in any place convenient for the driver. However, when mounting grants into the dashboard, it may be difficult to pull the wiring to the diagnostic block. The panel will need to be removed and holes drilled, which may void the machine's warranty. If the device cannot determine the specified settings, it will need to be reflashed, and this can already be attributed to the disadvantages of the model.
Multitronix has a very convenient user interface and simple settings, as well as clarity and speed in operation. Naturally, under the supervision of such an “assistant” the car will always be under vigilant control. Its price will be higher than that of the STAT on-board vehicle, which is more adapted to the Grant.
Since the release of the Lada VAZ 2190 for sale began at the end of 2011, it was quite difficult to initially purchase some electronic components for this car. This circumstance slightly slowed down the growth of the popularity of this car. However, today you can buy a router for a VAZ 2190 from almost any supplier of automotive products.
Lada Granta models in the “Norma” and “Lux” configurations are equipped with an on-board computer with a large display and good information content. The computer collects, processes and displays information useful for the driver, including gasoline consumption in the fuel tank with an accuracy of one liter, basic traffic statistics, problems with the operation of the main vital systems of the car, air temperature indicators in the cabin and outside.
Choosing an on-board computer for the Lada Granta
As an alternative to the weak standard BC, car enthusiasts install multifunctional on-board monitors that will show not only the engine temperature, but also many other parameters. Today, manufacturers can offer three main devices suitable for the VAZ 2190-91: “Multitronics”, “Orion”, “State”.
"Multitronics"
The device is a universal one, since the manufacturer does not produce them exclusively for Grants. Judging by the documentation and instructions included with the device, installation of Multitronics is quite possible on earlier VAZ cars: first-generation Kalina and Priora. Finding a place to install the device is the concern of the car owner.
"Orion"
The computer of this brand is also universal and is used not only for Grants. The installation site may have to be modified independently.
This company produces on-board computers exclusively for domestically produced cars. The devices are not created for universal use, but specifically for each car model.
"Stat" is based in Togliatti and tests all its developments on AvtoVAZ cars. Installed instead of a plug for additional buttons. This device is modest in size, but has additional useful functions:
- spark plug warm-up mode – relevant in winter;
- “Tropic” mode, which allows you to independently set the desired temperature for the engine cooling fan to operate;
- diagnostics of system errors.
The “State” X1 M is inexpensive, which makes it noticeably superior to its competitors. But if you need a full-fledged on-board computer with a display and an intuitive interface, you should take a closer look at universal devices.
Installing a BC can pay for itself after the first replacement of a sensor, because the car owner will be able to carry out diagnostics on his own.
Description
The on-board computer on the Grant is easy to select and install. This car has an OBD-2 diagnostic connector, to which the BC is connected using a standard connector (usually included in the kit). There is a model BC State x1, which are installed instead of a button plug in the panel. The connecting wires are connected to the diagnostic block (located near the front passenger's left leg). Universal on-board computers are installed on the dashboard or windshield. There are also models installed instead of a radio.
This is the best thing that has ever been created in Togliatti. Harmony, originality, budget price - this is the Lada Granta 2190. The car replaced three “classic” models - VAZ 2107, Kalina and Samara. Not a high price is the main priority of this model. To do this, the company used technology that allows you to reduce the number of parts that make up the car. For example, the front part consists of only three parts, and the instrument panel consists of 40 parts. The Lada Granta is 22 centimeters longer than the Kalina and has 5 mm less ground clearance. The car is already arousing great interest, and the queues for it are huge.
It would take a lot of time to list all the advantages of the car, but still, how can we not mention the spacious interior and beautiful modern panel from Renault Logan. There is enough space for a tall driver, there is enough space both above the head and on the sides. The seats are better in shape and design, and have an upright seating position. The same front panel now has a stylish dark color, round ventilation holes, and laconic shapes. The steering wheel contains three spokes, just like foreign cars.
The doors also acquired a more complete composition and meaningful design. The beautiful door handles finally began to resemble themselves. Large side mirrors provide good visibility, and this is very important for drivers. It will probably be interesting to many, but it was in the Lada Granta that another interior detail appeared, which had never been on VAZ cars before, these are two cup holders.
The package can be found in three versions: Standard, Norma, Luxury. The “Standard” kit contains manual windows and unpainted bumpers. And the “Norma” kit also contains an airbag for the driver, an electric tailgate, an on-board computer, and an alarm system. The “Lux” package contains full power accessories, heated mirrors, air conditioning, heated front seats, airbags, ABS+BAS. Each configuration has its own engine, all of them with a volume of 1.6 liters, but with a power of 80, 90, and 98 horsepower.
Whatever one may say, the Lada Granta is a modern car, which is distinguished by a spacious interior, a new panel, seats, and a large trunk. And although technically the car is far from perfect, it is a new and most importantly affordable product.
Multitronics in Lada Granta
State Uni Comp 620 in Lada Granta
The “simplest” on-board computer for the Lada Granta is the BC STATE X1-G. It is compatible with ITELMA M74, M75 units, as well as BOSCH ME17.9.7. The connection is made to the OBD connector, which is located in the cabin. No additional power is required. We will look at how to install it, as well as how to update the firmware. Sometimes you need to update it immediately to get compatibility with a new car. Therefore, read the review carefully.
All functions of BC STATE in one video.
On-board computer firmware Grants
You can update the software yourself. To do this, you will need a USB-K-Line cable, the firmware itself, a diagram of the Lada Granta ECU, an installation program and a driver for connecting to the adapter.
BC connection diagram for firmware
Schema collection algorithm:
- Take 3 wires.
- Switch T1 is closed as required by the program.
- The computer serves as the power source; just connect to Molex. For the on-board device, you can use the terminal block from the cooler.
- Connect the adapter to the USB port and install the driver. Next, you need to remember the port number you are using.
The firmware process looks like this:
- The program starts and the firmware is selected.
- The desired port is selected.
- Click on the lightning icon, after the “Turn on power” message appears, you need to press any button and start the firmware protocol, this will take several minutes.
To download all the software necessary for flashing the firmware, just go to the official website of the manufacturer of the Lada Granta on-board computer. You can also find all the necessary drivers there.
Versatile alternative
Of course, thanks to their various mounting locations, Multitronics on-board routers can compete with the States. Powered by a 32-bit processor, multitronics are precise and fast in operation. If a car enthusiast has the opportunity to buy such an on-board computer, then the car will be under excellent control thanks to functions such as:
All of the above functions of the State on-board vehicle have been added to the multitronics. In addition, the latter have easy setup for operation and a convenient user interface. But due to all this, the price will be much higher than that of a compact and more suitable State Grant.
Installing an on-board computer allows you to monitor problems in the operation of the internal systems of the car. The most popular device model STATE GRANTA x1 is already used by many motorists.
Owners note the ease of use of the device and its high quality. It includes 30 useful functions, which are controlled using two buttons.
Setting up and unlocking
You can unlock the onboard vehicle using the same firmware. Setting up the device is a simple task if you follow the instructions included with the device. You can also find out the answer to your question on the manufacturer’s official website or watch training videos.
Using the instructions, you can not only quickly set up the device, but also find out the codes of all possible errors. This will help to diagnose the malfunction in time and take measures to eliminate it.
In comparison with the standard BC on the Granta dashboard, any other on-board vehicle will be distinguished by its expanded functionality. You can do without them, but in this case, if you need to diagnose the car, you will have to contact a service center. By installing an on-board computer, the owner of the Grant can independently monitor all engine operation processes, diagnose malfunctions and activate some parameters.
- Price: 1080 rubles
- Go to the store
Owners of Russian cars know firsthand what meager capabilities a standard BC has. For example, my car doesn’t even have an engine temperature indicator (( In addition, I would like to have a device for diagnosing errors and, if necessary, be able to reset them. At first I wanted to buy a Bluetooth scanner, but to work you need to connect a device with Android OS, which is not very convenient. Therefore, it was decided to purchase an additional on-board computer.
Diagnosis of errors
When you begin to notice something unusual in the behavior of your car, or there are obvious problems in its operation, then it certainly makes sense to have it diagnosed. Naturally, the OBD-II diagnostic connector will show errors most efficiently and accurately. however, not everyone has pads to control this connector and has to use the standard one.
In order to enter self-diagnosis mode, you must:
Error codes (decoding)
These are the most common error codes that can appear if there is a malfunction on the Lada Kalina.
VAZ 2110 error codes are presented numerically on the display, and they are transmitted from phase sensors to the on-board computer. This is convenient, but a novice driver will not understand much and will not be able to figure out how to use this equipment. But you need to know and be able to do this, since the system, thanks to the built-in self-diagnosis function, will help to identify a malfunction in the early stages, which means it is possible to eliminate it in a timely manner.
General information and features
Remaining fuel in the tank Forecast of mileage on remaining fuel Fuel meter Travel time Travel time Average fuel consumption per trip Average speed per trip Diagnostic codes of the system Engine management Engine temperature On-board voltage Throttle position Digital tachometer Digital speedometer Plasmer Tropic Alarm Dangerous engine overheating Crash on-board network Exceeding the speed threshold Non-volatile memory
Supported cars - Lada Granta, Kalina-2, Priora-2, Datsun Compatible with Itelm M74 controllers Official website Installation and operation manual Staff X1-G
The BC is installed in a standard connector instead of a plug.
The X1-G state is connected to the standard diagnostic connector. No additional connection required.
The functions are distributed on both buttons, as in the photographs.
In diagnostic mode, if there is an error, its code is displayed on the display. A description of the error and possible malfunction can be found in the instructions for the bookmaker or download the program for the mobile application.
Functionality on board the vehicle
The manufactured models of onboard vehicles for the Lada Granta have a wide information memory and are equipped with a monitor. This significant advantage is beneficial even for drivers with poor vision and women who are not very confident in the functioning of the car. In this regard, the on-board computer can help the car owner. He points to:
In addition to these functions, the on-board computer on the Lada Granta has volatile memory, a malfunction indicator, a supervisor (warning about unplanned vehicle movement, unswitched headlights and direction indicators) and afterburner. The latter resets the memory when switching to the gas pedal when accelerating the Lada to its original settings when using gasoline no lower than 95.
The standard on-board computer of the Lada Grant, namely the State X1 M (Multi-Set) model, is considered the highest priority on-board computer for the Lada family. Compact dimensions allow it to be built into the instrument panel in the recess of the button cover. If a car owner wants to buy a State on-board computer, then, in addition to the device, the kit will include instructions and wiring.
The filling of the State X1 M model consists of a built-in trip computer, in which all the necessary information on the operation and diagnosis of Lada mechanisms will be processed.
A diagnostic tester can provide a lot of information about the car's condition.
The on-board computer diagnostic tester is equipped with a plasma, digital tachometer and speedometer. Using the tester, it is easy to clarify the position of the throttle valve and the state of the electrical network on board, which will help prevent possible damage and fire to the vehicle's electrical wiring.
Additional functions
"Tropic" function. Automatic fan control
Allows you to change the cooling fan activation threshold. I set the response temperature to +98°C.
Function "Plasmer". Drying and warming up candles
In difficult weather conditions (humid weather, freezing temperatures), pre-drying and warming up the spark plugs several times increases the likelihood of a successful launch.
Resetting the controller to its original factory settings. In this case, the dynamics and fuel consumption will be restored to normal values.
Indicator of not switched off lights or dimensions
When you turn off the ignition, there is a sound notification that the headlights or headlights are not turned off.
Speed Warning
It is possible to set up an audible warning about speeding. I don’t use this function because I always try to adhere to the speed limit.
What errors can the BC STATE Granta X1 indicate during operation?
The instructions for the device contain a table of errors and their explanation. For example, the combination P0717 indicates problems with the turbine speed, and P0712 indicates low oil temperature.
In the convenient and practical STATE X1 Granta, error codes are transmitted from the main controllers. They relate to the operation of the engine, and to the operation of the automatic transmission, additional control systems and mechanisms.
Correct installation of the STATE X1 Grant allows you to profitably equip your vehicle and protect it from unexpected breakdowns on the road. Installation can be carried out in a specialized workshop. But even a novice driver will be able to get the job done quickly and accurately. No special installation equipment is required.
Conclusions and impressions
I have been using this bookmaker for over a year. There are no complaints about the work. All declared functions work properly. The X1 staff allows you to control all the necessary data, as well as save a lot of money on diagnostics from officials or third-party service stations.
I definitely recommend this to owners of the domestic auto industry for purchase.
Designed for installation on cars of the GRANTA family instead of the instrument panel button cover.
Compatible with Itelma M75 controllers
WARNING ABOUT PARKING LIGHTS NOT TURNED OFF
NON-VOLATILE MEMORY (saves all values when the terminal is removed from the battery).
MANUAL ADJUSTMENT of the accuracy of fuel consumption and mileage readings within ±30%.
TRIP COMPUTER – 7 functions, including “Fuel level in the tank” and “Fuel mileage”.
DIAGNOSTIC TESTER – 7 functions, including reading diagnostic codes and clearing them.
ALARM – 4 PARAMETERS with the possibility of separate blocking of the sound signal
PLAZMER - drying and warming up spark plugs to facilitate cold engine starts.
TROPIC – automatic control of the cooling system fan when the engine temperature specified by the user is reached.
FORCING – resetting the controller learning memory when switching “gasoline”/”gas”, leading to the state of the original factory settings for gasoline with an octane number of at least 95.
History of software (firmware) versions for BC State X1-Granta
X1-grant dated July 31, 2012. Version 003. Changes from the previous version: -Stable transition of the 2515 chip to communication standby mode.
X1-grant dated 08/02/2012. Version 004. Changes from the previous version: - Increased resistance to failures in the CAN bus.
X1-grant dated 08/03/2012. Version 005. Changes from the previous version: - Increased resistance to failures in the CAN bus. -Introduced a delay for entering sleep mode.
X1-grant dated 08/08/2012. Version 006. Changes from the previous version: Control of screen brightness has been introduced based on the signal that the dimensions are turned on in the CAN bus. A warning has been introduced about leaving the dimensions when the ignition is turned off.
X1-grant dated 08/20/2012. Version 007. Changes from the previous version: Elimination of malfunctions in the CAN transmitter. With quartz at 16 MHz
Decoding combinations
Well, now it’s time to tell you about decoding fault combinations.
Diagnostic connector for connection to the on-board computer
Decoding codes after diagnostics with a scanner
As stated above, if the measured characteristics do not differ from the standard ones by more than 20%, then everything is in order with the car. What are the standard parameters?
| Parameter | Meaning |
| UACC | Shows battery voltage. To understand whether there is an error in this case, it is necessary to activate all devices that consume the most voltage. Allowable voltage is from 13.9 to 14.5V. If it is less, then it is necessary to check individual circuits of the network. |
| THR | Throttle position parameter. As a rule, if it is faulty, the driver will know about it without diagnostics, since the car will move jerkily and the engine power will constantly drop. Press the gas pedal without starting the engine, but turning on the ignition. The TPS readings should gradually increase to 90% (or slightly less). If everything is so, then the sensor is working; if not, it needs to be replaced. |
| FREQ | Crank pulley rotation speed parameter. The rotation speed is up to 840 rpm. If this sensor fails, the operation of the motor will be impossible. |
| AIR | Mass air flow parameter. It should not exceed 12 kg/hour. Start the engine and press the gas pedal so that the number of revolutions increases to 5 thousand per minute. In this case, the parameter should increase to approximately 250 kg/hour. Naturally, if the device is working properly, then the indicator will be like this. |
| UOZ | Represents the ignition timing angle. It should change in the range from 6 to 15 degrees. |
| INJ | This parameter bk represents the duration of the injection pulse (the time required to open each injector so that gasoline enters the cylinder). Ideally, this parameter should be between 3 and 5 milliseconds when driving at neutral speed. If the readings obtained during diagnostics are much higher, then, most likely, the injectors are already clogged and need to be cleaned. Or this indicates low gasoline pressure as a result of a clogged gasoline filter or pump. Press down the gas pedal sharply. The injection time should increase to 20 ms. Ideally, accurate diagnosis of injectors is only possible using a test bench. |
| FSM | Idle speed sensor performance indicator. Ideally, this parameter should not exceed 50-60. If you press the gas pedal sharply, it can increase to 160-180. |
| ALAM 1 | Indicates the voltage level recorded on the oxygen level monitoring device. When the car engine is warmed up, this indicator should increase from 0.007 to 0.7 V. If this indicator differs, then something is wrong with the circuit. |
| LUMS_W | This coefficient indicates the rotation of the crank pulley. Ideally, it should vary around 4 revolutions per second. If it is slightly larger, then this already indicates a misfire in the engine cylinders. This means that you should pay attention to checking the spark plugs (whether they are working, filled or not), as well as the condition of the high-voltage wires. |
| QT | Gasoline consumption coefficient. With the engine running and idling, it should not exceed 0.9 liters per hour. |
What are the advantages of the device?
Commercially available on-board controllers, adapted for Lada Grants, are equipped with displays and are endowed with a significant amount of information memory. This feature is very useful for owners with poor eyesight, and will also prove to be an indispensable assistant for female drivers who are unsure of the purpose of the information elements of the dashboard.
In view of the noted features, the on-board controller can contribute to more comfortable driving due to the efficiency and timeliness of providing the driver with route information. After all, it is capable of displaying information regarding the following points:
- travel time;
- fuel consumption during various driving modes;
- average speed and specific fuel consumption;
- remaining fuel equivalent to mileage;
- speed of the car at the start of movement;
- fixed motor temperature at a certain time, whose control avoids overheating of the unit;
- occurrence of malfunctions in Lada Granta units that have feedback from the control unit;
- timely heating and drying of candles;
- temperature inside the cabin and a similar parameter outside.
In addition to the indicated functions, the on-board computer is equipped with options, including:
- non-volatile storage device;
- the ability to generate a signal about emerging problems;
- supervisor: the option warns about the unauthorized start of the car (rollback), left lights and turn indicators on;
- “afterburner”: the function allows you to cancel memory data that implies the use of fuel of questionable quality, and during sudden acceleration, return to the original settings.
To activate this option, you must use 95 gasoline as fuel.
About energy consumption
The BC STATE model X1 G consumes 0.015 Amps when in standby mode. The rest of the time the current can reach 200 mA. In practice it is difficult to obtain a value exceeding 170-180 mA. For comparison:
- Good (expensive) signaling, standby mode - 10-15 mA;
- Conventional signaling with a key fob - 25 mA;
- Alarm in the “Disarmed” mode – 100-300 mA.
In general, our BC is quite “gluttonous”, but not as much as an alarm system.
2.5 6 votes
Article rating
3 Self-check - deciphering error codes
BC State X1 allows you to diagnose the functioning of individual vehicle components without the use of scanners, laptops and other electronic devices. In this case, checking the car is done like this: press the daily mileage reset button on the dashboard and immediately turn on the ignition (you don’t need to start the engine itself).
After such actions, the BC will begin diagnosing the instrument panel. Then you need to turn on the windshield wipers (just press the corresponding button - it is located on the activation lever of the specified device) and watch how various fault codes appear on the State display. Explanations of common errors are given below:
Note! Any decrypted code tells us about a real malfunction. Therefore, you definitely need to contact a car service or solve the problem yourself if you have the skills to perform simple repairs on your car.
How to install BC STATE X1 on Grant with your own hands?
Easy to connect STATE Granta X1 G allows you to carry out work in your own garage. To complete it, the owner will only need the mounted device itself and wires. Everything you need is included with the device. Therefore, after purchasing the device, you can immediately begin installation using the following instructions:
1. Remove the front panel button cover.
2. The computer wire is connected to the diagnostic connector located under the glove compartment on the right.
3. The connected wires are led out through the hole from the plug.
4. The computer unit is connected to the wires and installed in the hole.
5. Connection wires are hidden under plastic.
Each driver will be able to carry out the specified work. For the STATE X1 Grant device, installation requires a minimum of knowledge on transport arrangements. Therefore, even the newly-made owner of the Grant can perform it.
Self-installation does not require extra cash costs and can be performed at any time convenient for the performer. The operation of the device is checked immediately after installation.
For the on-board computer to be truly useful, you should carefully read the attached description. You should always carry with you a list of codes and their decoding to instantly identify problems and solve them.
The instructions attached to the STATE X1 Granta will allow you to always be aware of identified errors. Most of them are solved in the workshop, by diagnosing the systems and carrying out their repairs.
- Original German autobuffers Power Guard Autobuffers - save money on suspension repairs, increase ground clearance +3 cm, quick and easy installation...
Lada Granta is a modern domestically produced car, which has been highly popular in our country since it left the assembly line. At the same time, many owners of this car note the low level of information content of the dashboard, especially the lack of an engine temperature indicator. The best solution to the problem is to install a route or on-board computer; you can do this yourself.
Staff 110 X 5 RGB trip computer VAZ 2110
Installation of staff x1 grant.
on-board computer STATE x1-g On-board computer STATE 110 X5 RGB Black for VAZ 2110, VAZ 2111, VAZ 2112.
The on-board computer STATE 110X5-M BLACK is equipped with an RGB display.
Serves for installation on injection VAZ cars of the 2110 family with any panel. The new design significantly improves its user characteristics. The computer is compatible with all types of controllers BOSCH, January, Itelma, Avtel, except January 4.1, GM. The computer has non-volatile memory, which allows you to save all data when you remove the terminal from the battery.
Differences between the State 110X5-M Black RGB and previous versions.
- Automatic thermal compensation of display contrast is implemented in a wide temperature range: -30…+70°C.
- The possibility of parallel monitoring of route parameters at two different reference points has been implemented
- Eight multi-displays (MD) with a variable set of parameters and one multi-display
- with changing parameters automatically depending on current conditions.
- The BC has a “TAXI” mode, which allows you to display the cost characteristics of the trip and the cost of fuel consumed.
- The BC has a “DYNAMICS” mode, which allows you to measure and display the dynamic characteristics of the car.
- The ability to program the functions of the “CLOCK” and “FAVORITE” buttons has been implemented.
- BC has a warning mode about the timing of maintenance and expiration of the insurance period.
- The bookmaker implements a “sleep mode”. When the ignition is turned off, but the BC is still connected to the car’s on-board network, the screen brightness drops to 0% and only the “CLOCK” MD remains available. To illuminate the CLOCK MD brighter, press any button on the top panel of the bookmaker. The screen will be illuminated for 8 seconds, after which the bookmaker will go into sleep mode again.
- The bookmaker has 4 levels of settings: User settings; Fine settings; Additional settings.
- Display of ECM errors with their status and their text description.
- It is possible to flash the BC using a “Data cable” or “Datacable USB” cable (not included in the package).
• Parameters of the current trip - indications of the remaining fuel in the tank - indications of the average speed for the trip - indications of the average fuel consumption for the trip - travel time - speed - indications of the distance traveled for the trip - indications of fuel consumed for the trip - mileage forecast on the remaining fuel - time in routes - gas consumption readings - gas level - taximeter - previous trip data
•ECM parameters - engine temperature readings - tachometer - throttle position - ignition timing - on-board network voltage - air flow - current vehicle speed - voltage on DC1 and DC2 - temperature in the intake manifold - injector injection time - fuel consumption - IAC position - ECU software version • 8 Dial multi-displays and 1 automatic multi-display • Tech. maintenance and diagnostics — Next maintenance date — Oil changes in the internal combustion engine and gearbox — replacement of air and fuel filters — replacement of the timing belt and generator — reading ECM errors — Plasmer — Fast and Furious — OSAGO expiration date — CASCO expiration date — fuel quality control — vehicle dynamics parameters — acceleration dynamics — braking dynamics — Engine diagnostics — fuel pump circuit test — injector balance measurement
• Settings and settings - display brightness - display color - display contrast - speed threshold - cooling fan temperature - welcome rarely/often - "favorite function" button - "clock" button - display the status of the automatic door lock mode - reset settings
— Additional bookmaker settings
— Taxi mode — cost of 1 km of mileage — cost of supplying a car — cost of a liter of gasoline — speed threshold — idle speed control — preset idle speed — signal on the LPG contact — sign of door opening — choice of voice messages male/female
— Connection settings — ECM controller type — fuel level sensor source — gas tank volume — cylinder volume — selection of source for fuel consumption and mileage data — maintenance warning — compulsory motor liability insurance warning
— Loading factory settings
— Fine adjustments of the BC - flow correction - clock correction - voltmeter calibration - fuel level calibration in the tank - gas flow correction - external air temperature correction - BC diagnostics
• Hazard warning lights and warnings - wishes for a safe journey - side lights are not turned off - maintenance is close - insurance period is near - on-board network failure - low fuel in the tank - engine overheating - alarm clock - speedometer 60 km/h - attention possible icy conditions
• Clock, Calendar, Alarm clock
How to install the device?
By purchasing the “State” controller model, the owner becomes able to install the device independently after purchasing the Lada Granta; detailed instructions will help with this. This eliminates concerns about loss of warranty service, since the Lada Granta panel is already equipped with the appropriate connector from the factory. After installing the controller, the entire list of electrical devices integrated into the panel is not damaged.
Installation is carried out after removing the factory plug in the designated place on the panel. This device with the attached wiring is installed inside the niche that appears. The end part of the controller cable is brought out to the location of the diagnostic block and connected to its connector. The diagnostic socket is located in the lower part near the passenger seat.
The on-board computer has gained popularity due to the presence of such important and balanced consumer qualities as:
- relatively low price;
- compact dimensions;
- ease and accessibility of installation for the vast majority of Grant owners.
Having decided to purchase this particular model, the owner of the Lada Granta ensures comfortable and safe operation of his “iron horse”.
Video instructions about the operating features of this controller will allow you to study this device in sufficient detail. But more than one “State” can be equipped with a LADA Granta panel. Among alternative products, you should consider the Multitronics model. Various versions of this device are endowed with versatility due to the possibility of their installation in the places of the car’s interior that the owner likes (windshield, panel, etc.).
Installing this option in the Din socket of the panel causes some difficulties due to the need for careful routing of the wiring to the place where the diagnostic block “habits”. For these purposes, it will be necessary to dismantle the dashboard to make technological holes for the wiring “route”. It is recommended to resort to these manipulations using a heated knife, which will avoid noticeable deformations of the panel. The wiring should be firmly fixed to the inner surface of the panel in order to prevent the noise it creates when moving. The case itself, which has a standard computer, is best attached to the panel using liquid nails.
After connecting the router cables to the diagnostic block connector, the device must be adapted to the network, which implies determining a complete list of on-board settings. If this process is not observed for some time, the firmware version should be changed in order to provide it with the ability to support protocols in the “CAN” format.
Why buy 110Х4М Route computer 2110 “State” 110 Х4-М ORDER STATE from us:
"Avtolyubitel" is the largest automobile supermarket in the south of Kuzbass. It was opened in 1987 and since then has been the center of automobile trade in the city of Novokuznetsk. We are a supplier of the STATE brand in the territory of Novokuznetsk, Kemerovo region of the Russian Federation, we have several warehouses in stock and have spare parts for rare cars and are ready to give a good price for Route Computer 2110 “State” 110 X4-M ORDER 110X4M of the STATE brand.
All STATE brand parts are guaranteed.
Price for 110Х4М Route computer 2110 “State” 110 Х4-М ORDER:
You can get a price for an original or analog spare part Route Computer 2110 “State” 110 X4-M ORDER, and know the best delivery time that will be convenient for you, by calling our manager. Our sales consultants are always happy to see you and are always ready to provide you with qualified service.
Telephone:
+7
Or send a VIN request on our resource and the manager will call you back.
Characteristic
On-board computer of the VAZ 2110 injector: disadvantages and advantages
BC takes up little space but does a lot of work. Below you will find out what kind of work this is and what additional capabilities it has.
Device for car
The lineup
The model range is not too extensive, but still varied:
- UniComp staff;
- State 110 and 115;
- State x1.
There are other models, each of which corresponds to the personal preferences of car enthusiasts.
Functional
- Ability to display and delete ECM errors.
- Displays operating parameters, or more precisely, coolant temperature, electrical voltage in the on-board network.
- Shows emergency parameters: high engine temperature, system problems.
There are also several additional functions:
- “Afterburner” - this function resets the controller memory to factory settings.
- “Plasmer” is a useful function that is responsible for warming up and drying the spark plugs before a cold start.
Of course, the bookmaker’s capabilities are not limited to this (the author of the video is Alexander Ignatiev).
Advantages and disadvantages
Regarding the pros and cons, only a few words can be said:
- Due to its extensive functionality, which a standard bookmaker installed as standard cannot boast of, the gadget is especially popular. Among other things, it can be purchased at an affordable price.
- In addition, it has additional settings, including the ability to diagnose the system using error codes, the list of which is covered in the instructions received upon purchase.
- If you go deeper and look for disadvantages, some car enthusiasts complain about the standard BC firmware, but this problem is easily solved: you just need to download the software from the site and reflash the device.
Device inside the car
