On-board computer State X1-G - A reliable friend and assistant to the car owner


General information and features

Remaining fuel in the tank Forecast of mileage on remaining fuel Fuel meter Travel time Travel time Average fuel consumption per trip Average speed per trip Diagnostic codes of the system Engine management Engine temperature On-board voltage Throttle position Digital tachometer Digital speedometer Plasmer Tropic Alarm Dangerous engine overheating Crash on-board network Exceeding the speed threshold Non-volatile memory Supported cars - Lada Granta, Kalina-2, Priora-2, Datsun Compatible with Itelma M74 controllers Official website Installation and operation manual Staff X1-G
Box

General form

The BC is installed in a standard connector instead of a plug.

Connection

The X1-G state is connected to the standard diagnostic connector. No additional connection required.

Functional

The functions are distributed on both buttons, as in the photographs.

In diagnostic mode, if there is an error, its code is displayed on the display. A description of the error and possible malfunction can be found in the instructions for the bookmaker or download the program for the mobile application.

Installation of on-board computer BC State X1-G in the new Kalina

To install BC State in Lada Kalina it will take only 5 minutes. All you need to do in advance is to gain access to the Kalina 2 diagnostic block, which is located at the passenger’s left foot.

The procedure for connecting and installing BC State X1-G:

1. Remove the instrument panel plug (item 1), this can be done using a flat-head screwdriver; 2. Stretch the BC wiring harness to the diagnostic block (located under the glove compartment on the left side (item 2)) and connect the BC harness block to the diagnostic block according to the connection diagram. 3. Connect the 6-pin block of the BC harness to the on-board computer and install it.

Additional functions

"Tropic" function.
Automatic fan control Allows you to change the cooling fan activation threshold. I set the response temperature to +98°C.

Function "Plasmer". Drying and warming up candles

In difficult weather conditions (humid weather, freezing temperatures), pre-drying and warming up the spark plugs several times increases the likelihood of a successful launch.

“FAST AND THE FURIOUS” function

Resetting the controller to its original factory settings. In this case, the dynamics and fuel consumption will be restored to normal values.

Indicator of not switched off lights or dimensions

When you turn off the ignition, there is a sound notification that the headlights or headlights are not turned off.

Speed ​​Warning

It is possible to set up an audible warning about speeding. I don’t use this function because I always try to adhere to the speed limit.

We cooperate with:

PEC

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: pecom.ru

Business Line

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: dellin.ru

Baikal Service

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: baikalsr.ru

Energy

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: nrg-tk.ru

WHALE

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: tk-kit.ru

Zheldor expedition

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: jde.ru

Vozovoz

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: vozovoz.ru

SDEK

You can find the nearest representative office, track the cargo and calculate the cost of delivery on the website: cdek.ru

Delivery is carried out throughout Russia and the CIS.

Deadline for order delivery to T.K. from 1 to 4 business days from the date of receipt of funds. (orders are not processed on Saturday and Sunday).

Lead time for orders that include painting services: 5-10 business days.

The lead time for placing orders and “made to order” items is from 14 days; you can check with the manager for more detailed information.

ATTENTION! All fragile goods (headlights, plastic products, glass, etc.), by default, are sent in additional paid packaging from TK. If you take responsibility for the integrity, we can ship without it. To do this, you need to make a note in the comments when placing your order.

For additional information, please contact the managers.

Types, prices

On-board devices can be divided into two large groups:

  1. Universal. These models can be installed on any car model. Most often they are mounted as an alternative to an interior mirror. Sometimes universal type BCs are mounted on the windshield;
  2. Individual. Such on-board computers are focused either on one car model or on a group of similar ones. For example, VAZ 2108, 2109, 2110 - the group is determined by the old instrument panel. These are more functional and efficient devices that use an electronic control unit and are mounted in the dashboard.

You can also distinguish injection and carburetor types. The first option has gained great popularity among motorists, so there are significantly more models on the market. As for the VAZ 2110, this car requires computers for the old type of torpedo. The most popular device manufacturers are State and Gamma. Depending on the price, the State offers a different set of features. There is even a color version of BC State. Gamma devices have a higher price, but they have less choice, since the model range is limited to functional modern devices.

Their prices are as follows:

  • The cheapest State computer will cost the owner of a VAZ 2110 1200-1300 rubles; for 2500 rubles you can already purchase a more serious version with a color display and a large set of functions. The latest model of the universal device, State, costs about 5 thousand rubles.
  • As for Gamma, the cheapest on-board computer here costs 3,200 rubles. The most expensive is 7,000 thousand.

In addition to these companies, there are Prestige, Orion, Multitronics and others on the market. It’s hard to say who is better and who is worse, since the functions are almost the same everywhere.

Parameters that are displayed on the controller display

The standard on-board computer present in the Lada Kalina allows you to quickly display information that displays such important parameters.

  1. Distance traveled. Traditionally expressed in kilometers. The value is positioned in the top line of the display. It is this indication that appears as an unchanging criterion, because it is constantly present on the display.
  2. Time. Information is provided in a 24-hour format. The parameter needs to be configured correctly to combine the readings with the actual passage of time. To set the values, use the “Reset” button. Here you need to hold it pressed until the flashing “time” symbol appears on the screen. After this, we set the required value of the indicator.
  3. Fuel consumption during the last trip. This parameter needs to be reset regularly. The driver performs this action, since the device is not capable of this on its own. This must be done immediately before the start of the trip, otherwise the reading will be cumulative, which is incorrect.
  4. An indicator of the average speed during the last trip. This parameter also needs to be constantly reset. This is necessary so that the computer does not count the speed from the moment the readings are reset to zero.
  5. Power reserve. This indicator is formed based on several factors. Based on fuel reserves, driving pace and other aspects, the computer calculates the distance that can be covered before coming to a complete stop. If the driving style changes or the driver replenishes the fuel supply, the computer will immediately recalculate this indicator and display a new value.
  6. Instant consumption. This is a parameter of fuel consumption in the current unit of time. The value can vary from 0 to 20 liters. This is influenced by the level of load on the motor at a given moment.
  7. Average consumption. The on-board controller calculates this parameter independently, based on the speed indicator, driving pace and other factors.
  8. Travel time. The value needs to be systematically reset. The calculation is carried out from the moment you leave the parking lot, subject to the reset of the parameter for the previous trip.
  9. Air temperature. The indicator is recorded using sensors integrated into the device, after which the information is sent to the screen.

Onboard Device Options

The modern market offers consumers a huge range of computerized devices.

Only the most popular models are listed:

  • Multitronics UX7;
  • State X1 Universal;
  • X1 G;
  • State Kalina XD;
  • Multitronics C900;
  • Multitronics MPC800;
  • Multitronics RC700;
  • UniComp 600;
  • Multitronics GL550;
  • Multitronics VC 731;
  • Multitronics VC 730;
  • Multitronics TC750.

What should you know about BC for Lada Kalina cars?

Let's look at the functions that State computers have for the Lada Kalina.

After reading the information below, you will find out what the bookmaker shows:

  1. The Plasmer option is a plasma heating of spark plugs. The essence of the function is to apply a pulse of 150 hertz to the electrodes of the spark plugs, and the pulse energy is 0.04 J. During the time the function is working, the spark plug allows you to release about 60 joules of energy, this makes it possible to reduce the possibility of failure to start the power unit. And this is true when using the car in cold or high humidity, as well as when filling spark plugs with fuel.
  2. Option Afterburner or resetting the parameters in the control unit memory to factory settings. The Fast and Furious function allows you to remove errors and get rid of the cause of the malfunction.
  3. Quality control of the fuel used. The device displays the quality ratio as a percentage using the “-” or “+” buttons. If you configure the engine parameters function, you can get a clear picture of the condition of the car's engine. You will be able to know about the time it took to warm up, the battery charge level, as well as the amount of voltage supplied to the tidy sensors.
  4. Most modern bookmakers have a screen customization option. Thanks to this function, the car owner can display on the device display those parameters that are important. This option allows you to adjust the brightness, color and contrast of the screen.
  5. A useful option is the ability to diagnose the fuel pump. This function allows you to monitor the pressure as well as the power in the system. It allows you to determine the condition of each car engine injector.
  6. Option Tropic. With its help, the cooling system fan will be activated when a certain temperature of the car engine is reached. It is important to use this function in the hot season, since it will prevent the engine from overheating (video author - 13domovenok).

The following are the main fault codes that the BC can issue:

  • P0134 - lack of signal from the lambda probe (oxygen sensor);
  • P0201 - the computer detected damage to the electrical circuit for controlling the injectors of the power unit;
  • P0301 - the system has detected misfire of the air-fuel mixture in the engine cylinders;
  • P0335 - no signal from the crankshaft sensor;
  • P0560 - the voltage in the vehicle’s electrical network is too low, this may affect the operation of electrical equipment.
Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]