Consumer analysis of Kayaba Premium shock absorbers for VAZ 2110

Experienced owners and car service technicians recommend replacing the timing belts on the Lada Priora after 50-60 thousand kilometers. A new water pump is usually installed in parallel with the belts. The pump also needs to be changed if you notice leakage, jamming, noise or play - these are symptoms of damage.

The best brands of water pumps for Lada Priora

Among manufacturers of pumps for Priora, car owners give preference to the TZA and LUZAR brands. The first one produces original parts for the Lada, and many buyers want to see exactly these on their car. And the second brand is considered one of the most reliable. The choice of manufacturers is quite large, and each has advantages.

TZA plant

Since its founding, it has been supplying parts to the AvtoVAZ assembly line. For Priora, he offers models with an 8-blade impeller, which increases the efficiency of heat removal.

Spanish pumps DOLZ

, which correspond to the original in all respects, cope with their tasks perfectly and are not capricious in relation to antifreeze.

Water pumps LUZAR

capable of operating at high speed for a long time. And the manufacturer gives them a 2-year warranty.

Pumps produced under the LADA brand –

original parts demonstrating optimal compatibility with vehicle components and high performance.

And the German brand FINWHALE

famous for the performance and extended life of the pumps.

Gas-oil shock absorbers and their features

There are no gas struts as such, there are gas-oil struts. But most motorists emit only gas, meaning gas-oil, and, accordingly, hydraulic (oil).

As for the design of the gas strut, everything is quite simple. There is a rod with a piston attached to its end. There are also two chambers, one contains oil, and the second contains high-pressure gas. The operating principle of such a device is as follows. When a load is applied to the rod, the piston presses on the oil, which is practically not compressed. Force is transmitted through the oil to a movable partition behind which there is gas. It, in turn, compresses under additional load, thereby ensuring smooth movement of the rod. When the load disappears, the gas returns to its original position, pushing the rod out.

Tips for choosing pumps for Lada Priora

In the line of any brand there are pumps for different car models, differing in dimensions and design features. When choosing a water pump, you need to take into account the mounting dimensions and materials from which the part is made.

The pump body for cars is made of aluminum. The metal does not corrode and is easy to shape into any shape. Manufacturers most often choose steel for the shaft so that it can cope with the load from bearings, seals and impellers.

Impeller.

One of the most important elements of a water pump, on which the performance of the pump depends. It comes in cast iron, other metal and plastic. The cast iron part is durable, but heavy and has thick blades, so its efficiency is inferior to others. Metal is lighter and more efficient, but is susceptible to corrosion. Plastic is the lightest material. Such an impeller is productive, but over time, due to contrasting temperatures, it becomes fragile and begins to slip.

Impeller

on the back side of the impeller relieves the shaft-housing seal. Not available on all models, but it helps to increase the efficiency of the pump and increase its service life.

Why STK are the best pistons not only in Russia, but also in the world

Whether it is the most famous in the countries of the former Soviet Union - I cannot judge. Firstly, the PR of Chinese disposable pistons knows no bounds and dubious, flimsy products manage to be promoted on the market as if at least someone will be satisfied; secondly, the unfounded belief of many drivers that European and American products are of higher quality than ours, just because they are European and American, cannot be dispelled.

We don’t know whether Samara Trading Company (manufacturer of STK) is the most famous, but we know for sure that it is the most leading, and its products are of the highest quality.

How can you be sure of this? It’s very easy - buy a domestic car (Priora, Kalina, VAZ 2105 - it doesn’t matter), install a set of STK pistons in the car and check the dynamic characteristics of the car. If you find at least one brand of piston kits on which the car will “eat up less oil” and its efficiency will be higher than with STC, we will take back our words.

Perhaps you, dear owner of a Volkswagen 1.8S, Opel 1.6/1.3 or even Ford, think that the kit that came to you from overseas is the most original/best/optimal? Supply STK pistons for a foreign car (yes, the plant also produces piston sets for foreign cars) and compare the indicators - you will be surprised, it turns out that here in Russia, in Samara, there is a manufacturer of the best pistons in the world.

So, today, STK pistons are not only the best pistons, but also the best “medicine” for piston groups. It’s amazing how well things are going for a car in which the valve stem seals have been changed for months, and then they decided to install STK and that’s it - the problem went away, the oil remains in the crankcase!

Non-stick pistons kit

STC specialists pay attention to quality and its improvement every day, hourly and every minute. The goal is to create ideal piston groups, and while engineers are moving towards this goal, we, ordinary motorists, have a chance to use impeccable products.

Piston casting at the plant is carried out using special, semi-automatic devices that were created specifically for this plant. There is no other technology like this; the company has specifically invested a lot of money and time to create the most advanced equipment on which you can make pistons and rings for your car!

The casting shape of each piston is controlled by people, machines and, every day, engineers want to control this process even more. The STK plant has a special foundry laboratory, which is equipped with the most modern equipment (no analogues simply exist in China, and many Europeans will even envy), allowing for accurate spectral analysis of the alloy and carefully, scrupulously checking every square micron of the piston.

The most unique thing about STK products is that prices for products from this company can be lower than for Chinese and European analogues, despite the fact that the quality of STK is much higher. So, for example, a complete set of pistons (including pins and rings) on a VAZ 2103 costs 1,884 rubles, but just four pistons will cost only 904 rubles.

Top 5. DOLZ 2170

Rating (2021): 4.67

The most durable Pump easily withstands intense loads and operates stably no matter what coolant is used.

• Characteristics

  Average price, rub.: 1750

• Country: Spain
• Impeller: plastic

Spanish water pumps are distinguished by their unpretentiousness in relation to the coolant and the intensity of vehicle use. This pump can be installed on any Lada with a VAZ-21126 engine with 16 valves. It is reliable and durable. At the same time, it demonstrates high performance, which allows it to effectively protect the engine from overheating. This model is installed on a gasket, which is included in the kit. There is no need to additionally use sealants, since the connection is quite tight - a correctly installed pump will definitely not leak during the warranty period. Among the disadvantages that few buyers highlight is the high price of the pump.

Advantages and disadvantages

• Withstands intense loads
• Durable
• Undemanding on coolant
• No sealants needed

• Prices are a bit high

Timing rollers andycar reviews

I was told that real Gates products are sold only as a set.

so no one has ever installed this belt? Andycar

Added after 39 seconds Didn't quite understand Andycar Gates dealers?

Top 4. LADA 21126-1307010-82

Rating (2021): 4.70

The best balance of price and quality A productive and reliable water pump under the LADA logo is in the middle price range. At the same time, the quality of the part is not satisfactory.

• Characteristics

  Average price, rub.: 1503

• Country Russia
• Impeller: plastic

Original spare part intended for Lada Priora with a 16-valve engine. Provides stable circulation of coolant and protects the engine from overheating. Due to the plastic 7-blade impeller, the part is lightweight, which makes life easier for the engine. But under the influence of high temperatures of antifreeze, the blades can become deformed and begin to scroll. However, this pump is productive and durable. Those who install this water pump on their car say that it is of high quality and lasts for at least 50,000 km. At the same time, the price for the part is affordable.

Advantages and disadvantages

• Original pump
• High performance
• Light weight
• Durability

• Plastic impeller

Reviews of ANDYCAR timing belt kits

To calculate the estimate

9 reviews missing

among 3 manufacturers

10,000 years ago I replaced it with a set of Andycar, the bearings scattered into trash. When I installed it, I changed the lubricant on the VMP auto. There seems to be lubrication, but it makes a lot of noise and plays.

Write your review about ANDYCAR timing belt kits

Voted FOR Suprotek oil additives on the rating page

The YITA Motor rug has its first review!

AMD generators only have 7 reviews. Perhaps you will add another one?

UKORAUTO foglights (PTF) have only 7 reviews. Perhaps you will add another one?

Liquid CRC key now has its first review!

OEM Toyota CVT oils have only 2 reviews. Perhaps you will add another one?

The AUTO HEAT car blanket now has its first review!

There are already 5 manufacturers participating in the auto rating of jacks for VAZ (Lada) Kalina!

There are already 5 manufacturers participating in the auto rating of clutch kits for VAZ (Lada) 2107!

KochChemie car shampoo has only 25 votes! Do you recommend?

The EUREKA toolkit only has 30 voices! Do you recommend?

There are already 25 reviews written on PILENGA.

There are already 50 reviews written for Termal cooling radiators.

There are already 50 reviews written for AVA cooling radiators.

Top 3. FINWHALE WP126

Rating (2021): 4.75

The most affordable pump The average price for this water pump is the lowest among the participants in our rating. At the same time, the part has an increased resource.

• Characteristics

  Average price, rub.: 1122

• Country: Germany
• Impeller: aluminum

The water pump with a toothed pulley is suitable for LADA Priora 2170 after 2008. The manufacturer focused on the wear resistance and durability of the part. Drive shafts are hardened to increase hardness. Polymer-ceramic seals minimize friction of the moving components of the pump and help maintain tightness for the entire life of its operation. In addition, the bearing housing has been enlarged. This allowed the use of a modernized double-row bearing capable of withstanding heavy loads. The service life of the water pump is 80,000 km. At the same time, the price tag for it is one of the lowest among analogues. In this case, you can find a fake. The red hologram with a whale and packaging with the same image help to recognize the original German pump.

Advantages and disadvantages

• Low price
• Increased resource
• Good performance

• You can find a fake

See also:

• 10 best power banks for cars

Popular thermostat manufacturers

The most popular thermostat manufacturers on PartReview are represented by the following companies:

1. LUZAR — 114 reviews. PR score: 65, average score: 3.6.
2. Vernet - 112 reviews. PR score: 69, average score: 3.7.
3. Wahler — 68 reviews. PR score: 72, average score: 3.9.
4. METAL-INCAR — 62 reviews. PR score: 82, average score: 4.2.
5. WEEN - 62 reviews. PR score: 85, average score: 4.3.

Most opinions about the operation and characteristics of thermostats are collected on these pages.

Top 2. TZA POWERFULL

Rating (2021): 4.80

Best Performance This model is equipped with an 8-blade thermoplastic impeller. The increased height of the blades creates a larger area for heat removal from the motor.

• Characteristics

  Average price, rub.: 1252

• Country Russia
• Impeller: thermoplastic material

This model was produced at the Tolyatti plant, which since its founding has been supplying the needs of the AvtoVAZ conveyor. The design features and imported components of the water pump made it possible to increase its service life and productivity. There is a Slovak bearing with improved load-carrying characteristics and an Italian cassette seal. The upgraded 8-blade impeller is made of thermoplastic and has increased blade height. This made it possible to expand the working area and more efficiently remove heat from the engine. The pump shows high wear resistance, but may still begin to play towards the end of its life.

Advantages and disadvantages

• High performance
• Wear resistance
• High quality build

• May loosen over time

See also:

• 12 best batteries for VAZ

Excel-G ruler

As motorists say, these are the most durable racks that can be found for similar money. Indeed, testing shows that under moderate loads the racks last quite a long time. Even though they should be classified as gas shock absorbers, they are not too hard. For example, Excel-G is the softest, Gas-a-Just is stiffer, Ultra-SR is intended only for sports driving.

Before purchasing, you should definitely look at consumer reviews. Kayaba Excel-G shock absorbers are considered inexpensive, and they are very often installed on domestic cars. Drivers also often note that this is the golden mean. There is both comfort while driving and a sufficient level of rigidity for good vehicle handling. I can definitely recommend it for purchase, especially considering the affordable price. Although sometimes there are also negative reviews. Kayaba shock absorbers on VAZ are relatively inexpensive, so struts are often counterfeited. It is advisable to buy from a dealer.

"Kayaba Premium": is it worth taking?

If you visit thematic forums on the Internet, this line is recommended by 100% of users. Despite the presence of such a word as “premium” in the name, these are quite budget models that are installed on most domestic cars. They are also very often installed on foreign cars and left positive reviews. Kayaba Premium shock absorbers completely change the driving experience. Although you shouldn’t count on rigidity here, since these are oil-based budget struts. They have all the diseases of this type of shock absorbers. In extreme cold they become tanned, and in hot weather they weaken.

As noted above, almost 100% of users leave positive reviews. Kayaba rear shock absorbers, for example, last more than 60,000 kilometers. This is very good considering their cost. For a set on a Chevrolet Lacetti you will have to pay about 9,000 rubles. It's not particularly expensive, and if you take into account the resource, it's practically free.