Do-it-yourself preparation and installation of electric power steering on a VAZ 2110

The VAZ car became the best in the Soviet automobile industry, and its popularity is still quite high. This is partly due to the high saturation of the market with these cars. They are available to almost every resident of the country, which is why they have become the “people's working” transport.

Steering wheel on a VAZ

Today, spare parts for VAZ are in demand, because so many cars needing maintenance require a large volume of parts. Among them is the steering wheel, some buy it simply to replace the old one, while others decide to embellish the interior a little, buying the steering wheel only for the purpose of some kind of tuning. It is important to consider that almost all steering wheels are interchangeable; in some cases you just need to use additional bushings.

Steering wheels for VAZ classic

VAZ classic includes all models up to 2108. Classic cars are more suitable for steering wheels in their own style, that is, without backlights and everything else. Steering wheels that are best suited are either strictly designed - dark, leather-trimmed, or made to look modern with wood-like plastic inserts or stainless steel metal inserts. Classics are attractive to some car enthusiasts only because they can still invariably retain their excellent appearance, even among modern foreign cars.

Classic VAZ 2107 steering wheel, fits VAZ 2101 - 2106 without any modifications

Option of a new steering wheel for VAZ classic No. 2

Option of a new steering wheel for VAZ classic No. 3

Classic style, not only in motoring, is an ageless style. Therefore, a well-maintained 2106 or 2101 has an excellent appearance and attracts with its style and shape, unusual for modern times.

Dismantling and replacement

We have already decided on the reasons and available steering wheel options for the “ten”. Therefore, it’s time to get rid of the old device and install a new steering wheel in its place.

1. Disconnect the negative terminal from the battery . This way you can avoid a possible short circuit in the steering wheel wiring.
2. Check if your wheels are level. Place it as level as possible in order to simplify the reassembly process for yourself.
3. Unscrew the seven fasteners that hold the steering column housing in place, and then remove the steering column lower housing.
4. Unlock the column position adjustment lever.
5. Lower the column down.
6. Moving it gradually upward, remove the upper casing.
7. There is a decorative trim on the steering wheel. You need to pry it off with a flat screwdriver.
8. You will see two fasteners that hold the signal button.
9. Unscrew them and remove the button.

1. Use a socket wrench or socket to remove the retaining nut from the steering wheel. Do not unscrew it all the way, which will allow you to safely remove the element. It should be recalled that there is a hard landing here due to the associated qualities. If you completely remove the fasteners, you risk severely damaging yourself or the car itself with the steering wheel being removed.
2. Before removing the steering wheel, be sure to apply the appropriate marks. You need to mark the location of the steering wheel relative to the shaft and the turn signal switch.
3. Now apply several gentle but firm blows with your palm to the steering wheel in the direction away from the dashboard.
4. After this, the device will be able to come out of the slots.
5. Next, unscrew the fastening nut.

Steering wheels for VAZ 2108 - 2109

VAZ2108 - 2109 cars are created in a more modern style, so so-called “racing steering wheels” are often used for such cars. Its main difference is its size, it’s just a little smaller in diameter.

Steering wheel for VAZ 2108, 2109, 21099 No. 1

Steering wheel for VAZ 2108, 2109, 21099 No. 2

Of course, it’s harder to make turns with such a steering wheel, there is less force available, but after driving a little, you get used to it, and it turns out to be much more convenient than the usual classic steering wheel. The fact is that with habit, the driver notices how much more comfortable and agile the steering wheel becomes. Although the gear ratio from the shaft does not change, the diameter of the steering wheel changes, and this gives a feeling of better sensitivity in driving the car.

Do-it-yourself installation of EUR from Priora on a VAZ 2110

Not every owner of a VAZ of the tenth family knows that this car can be equipped with Electric Power Steering from Lada Priora. In this article you can get a detailed course on installing the ESD on your car of the tenth family. Today, there are two types of power steering, these are power steering (hydraulic power steering) and electric power steering (electric power steering). The electric booster has much greater advantages than its counterpart, the hydraulic booster. The first and, probably, main advantage is that the EUR requires much less attention to itself, since it does not have consumables such as oil or other liquid. which is poured into the power steering. The EUR is much simpler than the power steering. Power steering is a combination of complex mechanisms. So, let's start the installation. For work we will need the following materials and tools:

1. Directly EUR

2. Flush shaft 3. Plate 4. Wires 5. Steering wheel and viburnum casing.

The approximate price of the issue is 15,000 rubles, by our Moscow standards this is quite a bit. But how much pleasure I received in return for the money spent. In my case, all the necessary parts were ordered from the car factory directly, everything was much cheaper. The photo shows the pads. Here we see that there is no need to do any twists, everything is fine as it is. I removed the standard terminal from the block and transferred it to the block located on the harness. Next, I installed the free terminal coming from the harness in the place where the standard wire coming from the standard block was powered. There has been some kind of exchange of wires, just the standard wire will now pass through the harnesses. The wire from the blocks has a rating of 50A.

Now we remove the steering shaft housing, all the switches, as well as the ignition switch. Then unscrew the bolt that holds the steering rack, and then remove the rack itself.

Let's compare the shaft from the tens with the Priorovsky shaft. We adjust the plate to its location.

We put the amplifier in its future place and realize that the shaft is a little small, so it fits about one millimeter on the rail. You'll have to work and adjust everything to the right size. The stock decimal shaft is hollow, so you will have to remake the plate and shaft from the Priora.

The shaft from the priory was changed in this place. We drill the plate. This is done so that the EUR can be inserted a little deeper. We install the amplifier and see what happens. The shaft climbed onto the rack, but did not do it completely, so now the rack fastening bolt cannot be inserted. We clamp everything tightly using a smaller bolt.

We install the switches in place and begin working with the wiring.

We pull two wires through the fuse block. These wires will conduct electricity directly from the battery, so there is no need to carry out any unnecessary procedures.

Now we connect the EUR wiring. We connect it and try to turn it. In my case, the EUR did not work. I started to swear, but then I remembered that the battery was disconnected. I connected the terminals, got into the car, turned it, eureka, the steering wheel turns with one finger.

Still, I am so proud of myself. Everything is ready, all that remains is to put everything in place. We collect all the switches, put in place the casing that hides the steering shaft and have a good ride. As I already said, the price is about 15,000 rubles, but now I don’t regret that I made this device on my machine. Good luck with all the improvements, goodbye.

Steering wheels for VAZ 2110 – 2112

These models are built using many modern inventions in the automotive industry, and the car body itself is made in a modern manner. Therefore, they are often tuned for sports cars using a variety of lights, both inside and outside, directly on the body. The right colors and well-placed LED strips can really transform a car. The steering wheels are also backlit.

Steering wheel option for VAZ 2110 - 2112, No. 1

Thanks for subscribing!

Steering wheel option for VAZ 2110 - 2112, No. 1

The steering wheel is made of transparent material, usually a silicone layer is applied to a metal frame, into which LEDs are mounted, arranged in such a way that when illuminated, it would seem that the steering wheel is glowing like one single lamp. Of course, there are other worthy solutions, so it's all a matter of taste.

Reasons for replacement

There are more than enough reasons to want to replace your steering wheel. But everyone has their own:

• The old steering wheel was worn out;
• The current rim does not meet the driver's requirements;
• The driver feels uncomfortable with the factory steering wheel;
• The unit received mechanical damage;
• Tuning, modifications to the interior and the entire car, etc. are carried out.

Drivers can name many more reasons why they want to get a new one to replace their old steering wheel.

Option for tuning

What to choose?

Based on the presented range of steering wheels suitable for the VAZ 2110, certain conclusions can be drawn regarding the advantages and disadvantages of various options.

We suggest you familiarize yourself with them in the table.

It’s up to you to decide which one you choose. The steering wheel plays a significant role in ensuring comfort and safety, so you should choose a high-quality product that you can use to comfortably control the movement of your car.

Euro steering wheel

In what cases is it necessary to remove the steering wheel, and what tools are required for this?

Despite the fact that the steering wheel is perhaps the most reliable element in VAZ cars, sometimes it needs repair or replacement, for example:

• when faults are noticed in the steering wheel;
• if the driver wants to replace the steering wheel with a new model;
• when the appearance of the old steering wheel no longer suits the owner and a new one is needed.

Malfunctions can occur due to the fact that the splines are worn out and backlash has occurred, and, as a result, the car reacts poorly to the driver’s actions. In this case, it is best to replace the steering wheel with a new one or a completely different model.

If the reason for the replacement is appearance, then you can either replace the steering wheel, or buy a cover for the existing one.

Also, sometimes the steering wheel must be removed if individual elements need to be repaired. For example, to work with the dashboard, or if the steering column needs to be repaired.

Steering wheel removal tools:

• flat and Phillips screwdrivers;
• socket head 24;
• extension;
• ratchet handle/knob.

When everything you need is at hand, you can start.

Repair

The manufacturer AvtoVAZ does not provide for repair of the electric power steering, only complete replacement of the assembly. Therefore, all repairs are carried out by the owner of the car at his own peril and risk.

You must always remember that repairing the electric power steering of a VAZ 2110 yourself can lead to an accident!

The price for the VAZ 2110 electric power steering and components is as follows:

• a new electric amplifier costs on average from 13,000 to 18,000 rubles; you can order it in online stores with delivery by mail to any region of Russia, or directly from the factory;
• a used electric amplifier costs from 2,000 to 6,000 rubles, depending on the condition, it’s worth looking on local bulletin boards, avito.ru, etc.

Installation components can also be sold separately:

• steering shaft for installing electric power steering - price about 1,000 rubles;
• bracket for installing electric power steering - price about 1,000 rubles;
• wiring harness for connecting the EUR - cost about 1,500 rubles;
• imitation of an electronic speed sensor (for carburetor engines) - approximately 1,500 rubles.

Choosing a high-quality steering wheel for the VAZ 2110

Of course, every car comes with its own steering wheel from the factory. Cars of the VAZ 2110 series are no exception.

However, the appearance, level of comfort and tactile sensations sometimes leave much to be desired. The rim often wears out quickly, the surface becomes smooth, which interferes with normal control.

Factory solution