Tensing the parking brake on Kalina and replacing its cable

The handbrake is one of the components of the car's braking system. The parking brake prevents unintentional movement when parking the vehicle. Regular maintenance and adjustment of the handbrake helps to avoid troubles when parking on an uphill or downhill slope. The adjusted parking brake should ensure that the vehicle is held on a slope of 25 degrees.

The Lada Kalina has a handbrake brake drive in the form of two cables. The force from the parking brake lever is transmitted through two cables to the rear drum shoes. When the handbrake is tightened to the top position, the pads unclench and fix the brake drum. In this position the wheel does not spin.

Bleeding the brake system

Today, as you may have guessed, we will talk about bleeding the brake system.
Why do you need to do this? First of all (and secondly, and thirdly) in order to expel all the air from the brake system. Air, unlike brake fluid, tends to compress. Therefore, when braking, in the brake system, due to the presence of air, the pressure created may not be enough to release the brake pads. The brake pedal will simply fall to the floor without any effect. This is why the brakes need to be bled. Air is the main enemy of the braking system. How does he get into it? It gets into it because of its lack of tightness. Also during any repair work (replacing hoses, cuffs, etc.). And you don’t need to hope that you did everything carefully. The repairs were completed - the brakes were bled. Golden Rule.

Enough theory. Let's get down to business. Bleeding the brake system is a procedure that is performed the same on any vehicle with a hydraulic brake system (without ABS). The main difference is only the sequence of pumped wheels. It is better to familiarize yourself with this in the operating instructions.

Replacing the brake master cylinder

Remove the battery and the air supply hose to the throttle body. Having unscrewed the tank cap, remove the cap along with the liquid level sensor. Use a rubber bulb to remove liquid from the reservoir.

We assemble the brake master cylinder with the reservoir and install it in the reverse order. We bleed the hydraulic brake system.

All articles on repairing a Lada Kalina car - “Repairing a Lada Kalina car”

Sources

  • https://vaz-russia.ru/remont-vaz-1117-kalina-universal/zamena-rabochego-perednego-tormoznogo-tsilindra-na-kaline.html
  • https://autoruk.ru/lada-kalina/tormoza-lada-kalina/zamena-glavnogo-tcilindra-tormozov-lada-kalina

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]