The steering wheel braid is an accessory that has not only an aesthetic function in the car interior (although this is also important, because style emphasizes individuality). Don't know how to determine sizes? The surest way is to measure the diameter of the steering wheel or find this parameter in the operating instructions for the car of the desired model. Each brand has a corresponding size – S, M, L, XL.
For cars such as Tavria, Oka, cars with a sports steering wheel, size S is suitable - the smallest. Diameter – 35-37 cm.
The most common size is M. Nowadays, most cars have a standard steering wheel with a diameter of 37-39 cm.
These are almost any foreign passenger cars, as well as Lada Kalina, Lada Priora, Lada Granta, etc.
If the braid is chosen for a VAZ 2101-2107, 21011, 21013, Niva, Volga or Moskvich, then the car has a steering wheel diameter of 39-40 cm, which corresponds to L.
XL – GAZELLE, UAZ, etc. (42-43 cm).
PS: I bought it in China, since I sewed it myself, it took me about 3 hours, but I’m very pleased with the result!
In a Priora car, the steering wheel comes in two types: a 4-spoke pre-restyling one and a three-spoke restyled one. In addition, you can install a multifunction steering wheel from Vesta on the Priora. The steering wheel of a Lada Priora car is rarely removed - for work in the cabin to soundproof the panel, replace the electric booster, and when the steering wheel itself is changed. You can remove it in 7 simple steps described below in this article! The price for the Priora 2 steering wheel is different from the first version, a little more expensive. The diameter is the same. In order to make the steering wheel thicker, a braid is placed on it, and to enhance it, it is covered with leather.
Everything in your favorite car should be good: dynamics, sound, comfort. Everything can be customized, that is, you can change the components in your own way. As an example, in the old Priora the usual four-spoke multi-steering wheel can be replaced with a new, three-spoke one.
The steering wheel on the Priora was adopted from other AvtoVAZ cars, the same style and simplicity. The Priora 2 steering wheel added modernity to the car interior - the design of the steering wheel that owners of foreign cars have long been accustomed to seeing in front of them has become available to lovers of domestic cars. Pleasant in feel, modern - it’s not in vain that they are trying to put it in pre-restyling Priors. The Priora was not equipped with a multi-steering wheel, but even in the new format it looks quite presentable, better than before.
Standard steering wheel - size, article number and price
First, it’s worth making a reservation that not everyone likes to install new-style components in the pre-restyling Priora. It would be fair to mention the pre-restyling steering wheel. Its article number is 11190-3402012-00.
It is not sold in all stores, “showdowns” or secondhand, but you will have to hunt for a new option. Its cost without an airbag is about 2,000 rubles. With it, the price can increase from one thousand rubles.
The steering wheel on the restyled Priora received article number 2170-3402018-00, its cost starts from 3,800 rubles. Please note that this is an option with a plug that is installed instead of an airbag, not from the “luxury” configuration - with a silver insert. A similar “luxury” steering wheel comes with article number 21700-3402018-20, it costs 400 - 1500 rubles more. The price for a steering wheel with an airbag starts from 7,500 rubles, from official dealers – 12,000 rubles.
Full size: The steering wheel diameter on the Lada Priora is 410 mm. Don't be surprised when you see that it fits Kalina too - the cars are equipped with the same steering wheels.
Steering wheel of Lada Granta, Priora, Kalina
Instructions
for Lada Granta/Priora/Kalina steering wheel wrapping with leather:
Expect the entire process to take you about 3-4 hours. The work is painstaking, requiring patience and diligence. Intermediate stages of reupholstering the steering wheel with leather in the photo:
Lada Granta steering wheel reupholstery process on video
:
Steering wheel condition after 2 years of operation. The skin did not rub, but only changed from matte to shiny:
Priora 1
The four-spoke steering wheel on the Priora with an outdated design, which it inherited from the “tenth” family, still serves drivers faithfully - as practice shows, even after 10 years it will wear out externally (but not much), but scratches will not be noticeable. During restyling, they decided to replace the old-style steering wheel with a new one, which is now installed in all flagship Lada models. The horn buttons are located under the driver's thumbs, which is not always convenient - for example, when going through a turn, you have to literally look for them, because the driver does not always hold the steering wheel as taught in driving school.
What to watch if the steering wheel shakes
If the car is driving over bumps, and the steering wheel “kicks” while driving, there is no need to rush to the service station - self-diagnosis in many cases helps to identify the cause of the knocking. The most common reason for this is a malfunction in the steering mechanism.
Steering rods
When they wear out, they receive small scratches due to contact with sand, misfires occur in the operation of the steering rods - this is immediately felt, because play appears when the steering wheel is turned.
Steering rack
When the grooves of the steering rack are practically erased, they do not engage fully with the gear, and each turn vibrates into the multifunction steering wheel.
Steering column cardan
The steering gear mounting clamps must be well tightened.
Factory steering wheel of a new type with a plug for Lada Priora, Kalina 2
Steering wheel braid, black with red stitching
Steering column switch (cable) of a new model for Lada Priora
Black steering wheel braid
Cover (slingshot) for the steering wheel of a new type, black gloss, for Lada Priora 2, Kalina 2
Kalina/priora turbo carbon fiber steering wheel for Lada Kalina, Priora, Chevrolet Niva
Adapter for installing a sports steering wheel on Lada cars
Plug instead of an airbag (dummy) in the old Lada Priora steering wheel
Factory steering wheel of a new type (original) with a plug for Lada Priora, Kalina 2
Plug instead of an airbag (dummy) in the steering wheel of the new Lada Priora model
Kalina/priora turbo wood-effect steering wheel for Lada Kalina, Priora, Chevrolet Niva
Old-style steering column switch (cable) for Lada Priora, Kalina up to 2011 with airbag
Restyling
The smooth droplets of the steering column switches no longer stand out visually – the new style suits the car just right. Along with many little things that appeared in the cabin, the Priora 2 steering wheel with a chrome-plated Lada nameplate fits perfectly into the interior.
The diameter of the steering wheel has not changed at all, but the thickness has decreased. Steering has become easier because when a person tries to grasp a wide object with his palm, his wrist and forearm become very tense - it turns out that while driving, the hand is constantly under even more tension than it should be, and gets tired faster.
Basic malfunctions: in what cases should the steering wheel be changed?
The steering wheel itself on a Priora is rarely changed - unless something is wrong with the wiring (that is, it cannot be fixed by any repairs) or the horn does not work immediately after purchase. No matter how frivolous this misunderstanding may seem, it is impossible to operate a vehicle without a horn. Most often, repairs concern the pillow and train. If the airbag “shot”, then the steering wheel, of course, needs to be changed.
The cable is purchased separately for the steering wheel, and in any case it can be replaced. But the steering wheel of the restyled Priora with an airbag fits another cable with catalog number 2170-3709315-00: without it you won’t be able to connect the airbag. If the housing of the steering column switches becomes unusable, then the steering column, of course, will have to be disassembled, but changing it is far from necessary.
Replacing the steering wheel of VAZ 2113, VAZ 2114, VAZ 2115
Welcome! Steering wheel - many people change it to replace it with a new one, more beautiful or more convenient, but sometimes there are also people who change the standard steering wheel to a sports version, it’s up to you to decide whether to do this or not, but in a good frontal collision there will be a greater chance of squeezing in a car that has a factory injury-safe steering wheel, not a sports jelly, in addition, the size of the steering wheel also plays a very important role, so when buying a new steering wheel at a car store, pay attention to the size (the larger it is, the easier it will be for you to turn the steering wheel but if it’s too big, it won’t be comfortable for you), and also look at its thickness (with a steering wheel that’s too thin, your hands can slip off during a sharp turn, and turning such a steering wheel will be less convenient).
Note! In order to change the steering wheel, you will need to stock up on: Screwdrivers, as well as an extension or a wrench, you will need to put on a socket head of size “24”, thanks to this head you will be able to unscrew the central nut securing the steering wheel to which without an extension and You can’t really get to the collar, so you obviously can’t do without them; in addition, take a hammer and a special drift made of soft metal for the same central steering wheel mounting nut!
Summary:
When should you change your steering wheel? At your discretion, but we will give you a couple of tips, if you decide to change the standard steering wheel to a sports one, we do not recommend that you do this, firstly, as was said earlier, sports steering wheels are stiffer compared to standard factory ones, and even technical inspection You may not even be able to get through with such a steering wheel, so think for yourself whether you need it or not, in fact, it is best to install a standard one, which was originally installed from the factory, but the latest cars of the Samara 2 family were equipped with injury-safe steering wheels from the VAZ 2110, think about installing them or change it to the native one from Samara 2.
Note! The steering wheel has a metal part of which it is attached to the shaft with a nut, this metal part can be deformed if you pull the steering wheel hard and try to somehow break it (Don’t think that it is impossible to break it on a car), then most likely this part will be deformed and after this it will become much more difficult and inconvenient for you to turn the steering wheel, in general, when you encounter this, you will immediately understand that in the video at the very end of the article, by the way, the metal part at the steering wheel is also broken!
How to remove the steering wheel on a Priora
When you are going to start such an operation with your car, make sure that it is firmly in place and will not roll away; to remove the steering wheel on a Priora, you need to calculate the force so as not to knock off the threads of the fasteners, and not to deploy the airbag, trying to do everything quickly.
To remove the steering wheel on a Priora you need to find:
- Flat screwdriver;
- Head number 24;
- Hex key number 5.
According to the instructions with additions from experienced drivers, we perform the following actions:
- Using a hexagon, unscrew the two bolts securing the airbag in the steering wheel (do not remove them);
- The cushion (insert in the steering wheel) will move slightly away from the steering wheel. Do not make sudden movements and do not try to remove it faster! Turn it smoothly and slowly so that the wiring is visible to you and you can work with it;
- Use a flat screwdriver to pry off the light green clamp of the wire block and pull the connector out of the fastening groove;
- Remove the pillow and set it aside;
- Remove the horn wire connector and disconnect it using a screwdriver;
- Using a wrench and a socket number 24, turn it smoothly counterclockwise several times and loosen the nut in the center - this is the steering shaft mount. Use your hands to knock down the steering wheel itself, simultaneously turning and releasing the nut;
- Remove the steering wheel. It is advisable to make a notch with a marker indicating the position of the steering wheel relative to the shaft.
Steering wheel braid, its sizes and manufacturers
The braid on the steering wheel makes the touch even more pleasant, and you don’t mind spending money on it, because in your favorite car you want to surround yourself with only the best things. On the Priora you can put on the braid yourself, or pull the braid on like a “case”. The cover will not completely cover the steering wheel, but it is easier to install and remove. There are a lot of manufacturers, and their products differ only in design, and the price starts at 700 rubles.
The leather braid on the Priora steering wheel will be installed in an hour and a half. The kit includes instructions and a needle. This braid will look very organic, emphasizing the central insert behind which the airbag is hidden. The price starts from 500 rubles.
Steering wheel of Lada Vesta and XRAY
Instructions
for reupholstering the Lada XRAY/Vesta steering wheel with leather:
The process is also shown in the video:
Have you ever had to install a leather steering wheel on a LADA yourself? What difficulties have you encountered? Let us remind you that we previously looked at other modifications to LADA cars. For example, installing a leather gear knob or eco-leather covers (for Vesta or XRAY).
Do you need a steering wheel braid?
The first and most frequently asked question is: “Why do you need a braid on the steering wheel, if at all?”
It’s good for owners of expensive cars with leather interior trim, where everything is harmonious, the overall style is consistent, and the leather steering wheel, pleasant to the touch, goes well with the car’s interior. But what should owners of the budget segment do, where everything in the car’s interior is so minimalist that there’s nowhere for the eye to fall? A steering wheel braid is also needed if you buy a used car, if the steering wheel is well-worn, with numerous scratches and abrasions.
The steering wheel braid also serves as a kind of cover, and like covers on mobile phones, it allows you to preserve the presentation of the steering wheel in case of selling the car.
The braid on the steering wheel prevents your hand from slipping and turning the steering wheel, which makes driving safer. It increases the thickness of the steering wheel, making the steering wheel more comfortable for drivers with a wider hand.
What is the diameter of the VAZ 2107 steering wheel and its replacement and repair
On the VAZ 2107, the steering wheel has 4 spokes, and the rim itself is made of special rubber. The steering wheel size on this car is 400 mm.
Select and put the braid on the steering wheel
Once you find yourself in the accessories department on our website, you will immediately see that there is a huge amount of steering wheel braids available here. And in order not to make a mistake with your choice, you need to understand how to choose the right braid for your car. The diagram is presented below.
The most important thing that influences the selection of braid is your tastes and desires, which will be reflected in the design of the selected accessory. Don’t forget about the diameter of the steering wheel: it needs to be measured and compared with the models in the store.
Which steering wheel braid should I choose?
But let's start choosing the braid for the steering wheel. We will select it according to parameters.
Material. Today on the market you can find steering wheel braids made of various materials. Most often, girls buy “fun” soft steering wheel covers made of velor, fabric, suede, plush, foam rubber, while men prefer classic options made of genuine leather or leatherette. The most durable and advantageous option is the one made of genuine leather, but such popular cases made of foam rubber very quickly become crushed and lose their shape.
Color and design. You should not buy a steering wheel cover that does not match the color scheme of your car's interior. So, if your interior is black, it is better to take the same dark steering wheel cover and leave beige models to the corresponding cars. Of course, everyone chooses a cover in accordance with their taste preferences, but sometimes this choice looks simply monstrous, especially if a colorful velor cover with butterflies is placed in an incredibly stylish and beautiful car.
Fixation method. There are two main types of steering wheel braids: covers that do not require covering, and the steering wheel braids themselves, which are fixed to it using special threads. Each variety has its own pros and cons. Fixed covers are quite easy to put on, however, during use, such covers can twist and slide if the cover does not fit tightly enough. The steering wheel braids can be completely integrated into the interior, so that an uninformed person will not even know that it is not native to this car, however, there are difficulties in covering the steering wheel with such a braid. You need to have a certain skill, free time and patience to cover the steering wheel yourself. You will learn how this is done further down in this article.
Steering wheel braid - dimensions
Deciding on the size of the steering wheel cover is quite simple if you are purchasing it for yourself and not taking it as a gift. To do this, you just need to measure the diameter of your steering wheel and select the size of the cover according to it.
How to choose the steering wheel braid size?
But what if you are purchasing the case as a gift? Today on sale you can find covers of various sizes: S (35-37 cm), M (37-38 cm), L (39-40 cm), XL (42-43 cm), XXL (47 cm), XXXL (49 cm).
Size S (35-37 cm). This size is perfect for small cars: Oka, Tavria or for cars with a sports steering wheel. This size will also fit the Kia Picanto; it has a steering wheel diameter of 37 centimeters (the cover will fit with difficulty, but will fit clearly).
Size M (37-38 cm) . The most common size that fits most foreign-made passenger cars. Size M can be confidently called standard, it is suitable for cars: Kia (Rio, Venga, Ceed, Soul, Sorento, Optima, Sportage, etc.), Nissan (Murano, Almera, Terrano, Sentra, Juke, Teana, etc.), Ford (Focus, Mondeo, Kuga, Ranger, etc.), Toyota (Corolla, Auris), Volvo (V40, S60, S80, etc.), Chevrolet (Cruze, Aveo, Spark, etc.), VAZ (2108-2109, 21010 - 2115, Granta, Kalina, Priora), and many, many other foreign cars. In general, you understand, if you have a foreign passenger car or a domestic car from the list above, then you can take size M with 95% confidence.
Size L (39-40 cm). NIVA, VOLGA, MOSKVICH, VAZ-2101, 2107, 21011, 21013.
Size XL (42-43 cm). UAZ, GAZelle, etc.
Size XXL(47 cm). Imported trucks.
Size XXXL(49 cm). KAMAZ.
How to trim a steering wheel correctly?
It's time to move directly to covering our steering wheel with the purchased braid, or to putting on a cover. As mentioned above, this activity is not as simple as it might seem at first glance. To simplify the whole process, I have prepared special photo instructions.
How to put the cover on the steering wheel?
The cover is pulled over the steering wheel from top to bottom. It is better when two people participate in this process: one fixes the cover at one point, preventing it from slipping and warping, and the second carefully tightens it. Sometimes the cover is put on quite tightly, and it is impossible to do without male strength.
