Every owner of a domestic car of classic models knows that the seats in them are not particularly comfortable and durable, so if you have the finances, there is a desire to replace them with seats from a foreign car. And here the question immediately arises about which seats are suitable for the VAZ 2107. After all, few people are interested in redoing the brackets on new seats in order to install them in the cabin. In addition, remodeling is not safe, so let’s delve into the essence of the question and get a detailed answer.
Which seats fit without modifications?
If there is a desire to change the seats in the cabin of the seven, then you need to install seats from a foreign car, which are characterized by increased comfort. In this case, a problem arises - the cost of seats from foreign cars is sometimes 2 times higher than the price of new seats for the seven. To reduce costs, you need to choose used models of chairs that will cost no more than new factory models.
To install new seats in the interior of the seven from a foreign car, the following factors must be taken into account:
- Dimensions or dimensions of devices, which should not be much larger than standard ones. There are no problems with this, since seats from foreign cars are not only comfortable, but also often have small dimensions, that is, they are compact.
- Mounting type. The brackets for the new seats, ideally, should fit the mountings in the cabin, so that they can be installed in the classic cabin without modifications. This factor plays an important role, since the fastening affects not only the possibility of placing seats in the VAZ 2107 interior, but also the safety of their operation. In most installation options, it is still necessary to make or select some spacers, washers or bushings in order to align the mounting points of the skid and the car body. But there is no need to weld or cut anything with a grinder.
- Shape and type of cladding. These are secondary factors that affect the comfort and appearance of the cabin. Most models of seats from foreign cars have a quite presentable appearance, and their installation does not require the use of covers.
By installing or replacing VAZ 2107 seats with analogues from a foreign car, you can simultaneously obtain benefits such as increased comfort, as well as changing the interior design for the better. No matter what model of foreign car the seats in the seven are installed on, they will still look better than the standard ones. Taking into account the factors described above, it is necessary to figure out which car the seats for the seven are suitable for. Preference should be given to the following brands:
- The 1993 Toyota Corolla E100 is an ideal option, since the interior of the LADA 2107 fits not only front seats without any special modifications, but also a rear sofa. In addition, devices from a car of this year of manufacture will not cost exorbitantly, so you can buy them very cheaply at a disassembly site.
- The 1996 Mercedes W210 is another good option. Reviews from car owners who have installed Mercedes seats indicate a number of advantages - no need for modifications, comfort, improved interior design.
- Toyota RAV4 - you also don’t need to make any modifications, you just buy, change and enjoy.
- Ford Scorpio - devices from the Ford brand are distinguished by their presentability. By installing such seats, you can enjoy long trips in a domestic car.
- Audi A80 - can be made without major modifications. The result of the replacement is a high quality of comfort, a large number of controls and settings, as well as a change in the interior of the cabin.
- Mazda 6 - fits perfectly under the standard brackets of the classics.
- Ford Recardo - you can completely install both the front and rear seats on the VAZ 2107.
Other parameters of Lada Priora:
| General parameters of Lada Priora seats | |||
| General view General view of the seats | min (mm) Minimum height from the front seat to the roof of Lada Priora for different modifications | ||
Data is presented in millimeters (mm)
| max (mm) Maximum height from the front seat to the roof of Lada Priora for different modifications Data are presented in millimeters (mm) | Modifications Number of modifications of the model in our database | ||
| (General form) | from 915 (mm) to 975 (mm) | from 915 (mm) to 975 (mm) | 1 |
| Lada Priora seat parameters | |
| Parameter Seat parameter | |
Data is presented in millimeters (mm)
Caution: the above data are the official figures of the manufacturer, however, please note that the information is for reference only and does not guarantee absolute accuracy.
Source: razmery.info
What are the seats suitable for without modifications?
Most car owners want to find seats that will fit in place, and replacing them will not take much time. But, based on the extensive information on the Internet on the topic “which seats are suitable for the VAZ 2114 without modifications,” we can conclude that in this case they install models from domestic cars: Seven, Ten, Priora, Kalina.
The AvtoVAZ plant is not always in a hurry to change the design of various elements. It's easier to do the same thing, changing the filling a little. Therefore, the sleds of these chairs are very similar and fit almost perfectly.
If we talk about suitable seats from a foreign car for the VAZ 2114, the information here is largely blurred. Many people install seats from: BMW E60, Hyundai i40 or Hyundai i30, Skoda Octavia A5, Audi A4. But before you go for disassembly, it is better to measure the length of the skid, perhaps they will be able to choose a more suitable option for your car.
But due to different body designs, problems arise that some fasteners will fit without difficulty, while others will have to be adjusted.
Dismantling and installation of Kalina-2 seats. What the manufacturer advises
The manufacturer provides each car owner with instructions that discuss exactly how to operate certain systems. The manual relating to the operation of the Lada Kalina-2 does not cover the procedure for installing and removing seats. However, AvtoVAZ has a certain set of requirements on this issue. They are published in the repair manual. These requirements are listed in this text.
Removing the front seats
To perform dismantling you will need a TORX E10 key . The horizontal position of the seats is adjusted as follows: the bracket “4” shown in the photo is pressed up, then the seat is moved forward or backward. To gain access to the fastenings, you need to move the chair back all the way. Check the picture:
How to remove the front seat in Kalina-2
If the indicated action is completed, remove the two “3” screws using a TORX wrench. Then the seat is moved all the way forward. On the back of the slide there will be two similar screws, which are also unscrewed with a TORX key.
When the fastening screws are missing, the seat is dismantled along with the slide. Before installation, it is recommended to apply Fiol-1 lubricant to the rubbing parts (10 grams per seat).
Removing the rear sofa
First, let's look at how to dismantle the cushions, that is, the seats.
How to remove the back seat in Kalina-2
Loop “3” must be pulled towards you to tilt one of the pillows forward. Then the brackets “1” are removed from the stops “2”. Nothing more is required.
When there are no pillows, you can remove the backrest. By pressing the handle “3”, the backrest is tilted forward (see photo).
How to remove the back of a sofa in Kalina-2
The backrest is secured from below with two nuts “1”. Each nut is unscrewed with a 13 mm spanner.
The back of the sofa is held in place by nuts
Note that, if desired, you can remove the brackets themselves, which are a fastening element. To do this, unscrew the screws “2”, using the same key 13.
Let's list the whole sequence again:
- By pulling loop “3” towards you, remove the pillows;
- By pressing the fastening handle, the backrest is tilted forward;
- The fastening nuts are unscrewed with a spanner.
As you can see, nothing complicated. There is no need to apply lubricant to the fastening parts here.
What would be suitable for seats with minimal modifications?
If it is possible to use a welding machine or an angle grinder, then you can install almost any option in your car. In this case, it is better to start from the concept of “price-quality”.
For example, there is the selection and installation of seats from Lancer 9. The main difficulties appear in fitting:
- Correctly measure the angle of the seats;
- The location of the structure relative to the floor, ceiling;
- Get into the factory mounts;
- Location between tunnel and door.
After the adjustment, the modification of the seats for the VAZ 2114 begins. Usually, a profile pipe is used on which they are fixed. Or they weld it to the slide, modifying it to fit the factory studs.
A lot depends on imagination and experience. For example, in the photo the fastenings were modified in a similar way.
Oddly enough, the seats from Lancer 9 in the interior of the VAZ 2114 look very harmonious.
Many people use seats from Subaru cars. They are quite affordable, can be found within 5,000 rubles. Replacement occurs on the same points as in the situation with the past. In this case, designs from Subaru Forester .
But remember that when using seats from a right-hand drive car, a large number of settings will be received not by the driver, but by the passenger. Of course, they can be swapped, but access to the settings will be limited, since the settings are usually located on the door side, but you will have them on the tunnel side. Ready-made anatomical seats for the VAZ 2114
Product delivery options
Note! Below are the shipping methods available specifically for this product. Payment options may vary depending on the shipping method. Detailed information can be found on the delivery and payment page.
Transport companies
| Value (mm) Parameter value in (mm). The maximum value for the adjustable parameters is indicated in parentheses. Data is presented in millimeters (mm) | |||||||||||
| Lada Priora | |||||||||||
| From the back of the front seat to the pedals: | from 825 (mm) to 1040 (mm) | ||||||||||
| Distance between rear and front seats: | from 180 (mm) to 275 (mm) | ||||||||||
| Left front seat width: | from 460 (mm) to 500 (mm) | ||||||||||
| Rear seat width: | from 410 (mm) to 470 (mm) | ||||||||||
| Height from front seat to roof: | from 915 (mm) to 975 (mm) | ||||||||||
| Height from rear seat to roof: | from 890 (mm) to 930 (mm) | ||||||||||
Available payment methods:
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Delivery is possible to any locality where there is a representative office of the transport company. Delivery time – from 2 to 10 days. Sending large parcels is approximately 50% more profitable than by Russian Post.
Courier delivery in Togliatti
Available payment methods:
- Cash upon receipt
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Delivery time from 1 to 12 hours.
Pickup from our warehouse
Available payment methods:
- Cash upon receipt
- Credit
- Using cards Sberbank, VTB, Post Bank, Tinkoff
- Yandex money
- QIWI
- ROBOKASSA
Pickup times must coincide with store opening hours.
Seat composition and options
The seat consists of three main elements:
- A – Side and back
- B – Central part
- C – Side inserts
The price is for a basic fabric seat, fabric options are presented below, and a combination of colors A + B (For example A - flight black + B - jacquard red)
Additional options:
- Double stitching along the seams with colored or black thread +800 RUR
- Double diamond in the central part with colored or black thread +2000 RUR
- C – Side colored inserts +400r
- The seat is entirely made of leather A + B + C +2000 RUR
- Only B – Central part or C – Side insert, perforated leather, replacement +1000 RUR
- Only one of the elements made of leather A or B or C +1000 RUR
Based on the combination of seat design, the maximum configuration is 1+2+3+4= +5200 RUR
| Double stitching of any color +800 rub . |
Colors available to order:
Source: motorring.ru
Ready-made anatomical seats for VAZ 2114
The easiest way out of the situation is to install ready-made converted chairs. Please take a look at the manufacturers listed below.
Video: Sports seats on a VAZ 2114 for 16,000 rubles
The Viller company is also popular, as the manufacturer claims, the models are made in accordance with GOST, relieve stress from the spine, and provide enhanced lateral support.
Also on the websites of online stores there are non-branded anatomical models for VAZ cars. Based on this, we can conclude that even despite prices starting from 15,000 rubles, they are still popular. There are chairs on the used market that are about half the price of new ones.
In any case, this type of seat is the simplest solution when it comes to upgrading the car interior. This solution will significantly save time and will not be inferior to the quality of seats from modern foreign cars, except that the number of adjustments will be fewer and there will be no heating.
If you are faced with the question of choosing and installing seats in a VAZ 2114, the most comfortable option would be to install anatomical models. If funds are limited and you don’t want to deal with a lot of alterations, it’s better to stick to seats from other, more modern AvtoVAZ models. In cases where you want to get maximum adjustments and other functions of a modern interior, it is better to install designs from foreign cars. Usually this method is less expensive, since seats of many brands are not always popular among their owners, but you will have to spend time installing new seats in the car.
The graphs show the dimensions of the VAZ 2107 car - width, length and height. Data is shown for all available modifications, including, for some, the overall width with mirrors.
The smallest cars are marked in green, and the largest in red.
Below is a summary table of overall dimensions for all modifications of the VAZ 2107.
So, there is a standard driver’s seat on the VAZ 2107, it was designed by a hunchbacked disabled person who hated all people and blamed everyone around him for his hunchback and crooked spine, last degree scoliosis. Why? Because he is disabled, and everyone else is normal and they have sex.
So, this hunchbacked disabled man sits and designs a seat for the new VAZ 2107 car. In the late 70s. And he thinks how to make hell for all users of the new machine, so that nothing seems like honey to them?
He made the seats and died. Or hanged himself, I don’t know.
So, we have a standard VAZ 2107 seat, which is held on by flimsy fasteners, is not normally adjustable, your spine is in the wrong position, and the headrest is at neck level. I don’t know who he designed for, but no one was going to redo anything, even if we remember that he designed for his height, one meter with a cap.
They told me that it’s hard to sit on my tattered cat behind me because my legs are pushed in, there’s no room and in general my car is shit, which is a shame. So, when I sit down with my 185 cm height, there is less space behind Bomzhatan than in the Tattered Cat.
In short, the result: the seat fastenings are torn out both front and rear, and diagonally. The seat does not move back or forth without a sledgehammer, the springs have burst, the seats dangle like my panties on a rope on the street in a wind speed of 22 m/s, the headrest is clearly made for a disabled person, because for me it is small and short, the seat is already lopsided, i.e. e. the design engineer specially made terrible seats, which as soon as the car was put into production in 1982, but in a planned economy you have to work on the warehouse - they made over a shitload of more than 7 million pieces at once. Or 10 million pieces of seats, in short, that was enough for 30 years to come. It’s not for nothing that some parts on Bomzhatan are marked “Made in the USSR”!
Front seats Priora from 2110 or not
July 14, 2011, 09:43 #26
PEOPLE, tell me who installed the Prior seats on the 10 ku, and are they even suitable? Moreover, the question is whether the door trims from the Priora will fit on a 10 cu with a 10 tier panel?
July 14, 2011, 09:57 #27
the seats are the same, at least for now, I won’t say anything about the cards, but I think they’ll fit
July 14, 2011, 10:18 #28
Dag05, July 14, 2011, 09:43
PEOPLE, tell me who installed the Prior seats on the 10 ku, and are they even suitable? Moreover, the question is whether the door trims from the Priora will fit on a 10 cu with a 10 tier panel?
As I understand it, you want a Prioro salon, my neighbor does the same with the Priora panel, but there’s still a gap somewhere that doesn’t fit as far as the seats are concerned. They are needed now, whatever buckets you want, they sell them at 10 ku, there are even craftsmen who trim them and make pilot seats out of them.
Chevrolet Lacetti Station Wagon
July 14, 2011, 11:46 #29
Russo, July 14, 2011, 10:18
As I understand it, you want a Prioro salon, my neighbor does the same with the Priora panel, but there’s still a gap somewhere that doesn’t fit as far as the seats are concerned. They are needed now, whatever buckets you want, they sell them at 10 ku, there are even craftsmen who trim them and make pilot seats out of them.
Changing the padding and covering it with leather is a simple matter; it is more difficult to create the right seat in a makeshift environment. It’s better then to stick UNP or from Priora
July 18, 2011, 07:57 #30
Better yet, change the car.
July 21, 2011, 15:45 #31
Thank you all, why didn’t I cover the seats because in the north they are making money for a specific amount, for example, ordinary covers without ponies cost 2800, and the most expensive ones are about 8 tons. I decided to change it because a friend bought an emergency Priora for spare parts, the entire interior remained, and I decided what to do You can’t use it, especially since the prices are correspondingly 30 times lower. And now I’ll tell you what I did: I changed the door trims, they all fit with rivets, but the front ones didn’t allow the doors to close due to insufficient recesses, so I had to cut it out, solder it, and everything started to close, although it didn’t look much sharper, but I think it’s special. plaster and paint on plastic will return everything to its place. The front seats from the Priora fit, but the rear ones don’t, unfortunately, so I’m thinking about how to rationally install them! Anyone who did what, please tell me, thanks in advance.
July 21, 2011, 15:50 #32
What's stopping the rear ones from coming?
July 22, 2011, 15:22 #33
In general, the rear Priors are divided into 1 saddle and 1.5 saddles and are attached in turn, i.e., not hollow. On the 10 ke there are latches on the sides for the lower hollow part of the seat and separate latches on the top for the backrests. On the Prior, the lower seat saddle does not fit into these latches due to the front iron fasteners, which are fixed below, approximately in the middle of the tank. And besides, the upper part of my old seats come with an armrest, but the new ones do not have this. i.e. if you remove the armrest, the fastening itself will interfere with the insertion of the upper part! Overall, it's worth the effort. Maybe someone can tell me what.
July 22, 2011, 15:40 #34
I find out my neighbor stuck a top ten Prioro salon
July 26, 2011, 12:13 #35
How is it possible for him to ask how bad it is or not? Is it even worth bothering with?
July 26, 2011, 12:53 #38
I will sell my cases, minus 30 percent (there is a photo in the review). I decided to make myself a white leather. interior (seats, trim, steering wheel, lever), I’ll post a photo in a couple of weeks
Source: wroom.ru
VAZ 2107 engines
The VAZ 2107 was equipped with several engines (for Russia and the USSR), these are:
- VAZ 2103 engine (8 class, 1500 cm3, 71 hp, carburetor)
- VAZ 2105 engine (8 class, 1300 cm3, 64 hp, carburetor, timing belt drive)
- VAZ 2106 engine (8 class, 1600 cm3, 79 hp, carburetor)
- VAZ 2104 engine (8 cells, 1500 cm5, 68 hp, central injection)
- VAZ 21067 engine (8 cells, 1600 cm3, 74 hp, distributed injection)
- RPD engine (rotary, 1300 cm3, 140 hp)
Piston diameter and stroke:
The injector for Euro-3 standards is already designed for A-95 gasoline.
Spark plugs for VAZ 2107:
Oil for VAZ 2107:
Oil change is done once every 10,000 km
see also
Comments 44
They offer me seats from the Accord 7. Do you think it will be difficult to install them in a Priora?
I don’t know myself from the BMW 735 in the E32 body
one of these days I’ll install a Subaru B4 for myself... while I’m preparing a neat frame for them...
From Lancer 9 2.0 to Priora we got up with some difficulties! but the impression is great
from Nissan Almera, BZ) everything is bolted and to the original fasteners) all functions are height adjustment, lumbar support, normal working slides, heating)
From paper 530 xi 2008. You buy adapters for the unp bride bucket and a similar plate on top because the bucket ones are narrower... and screw it on stupidly. I got by with 1500 without a collective farm. You can do it like this for any type of seat
Many believe that the domestic manufacturer offers not so bad cars. In particular, there are many good reviews about the VAZ 2110, which has already been discontinued. Today this car is already quite old, but even models with 15 years of travel experience in Russia are in no hurry to disappoint owners with their reliability. Of course, there are many questionable components and moments in the car. The interior isn't very attractive, the materials aren't the most expensive, and the build isn't the best. But overall, this car can claim to be one of the best from AvtoVAZ. The car sold in millions of copies, so today a huge number of representatives of this model travel on the roads of Russia. It is also worth noting that the tenth VAZ family was sold in hatchback (2112) and station wagon (2111) body styles. The sedan turned out to be the most popular, but other representatives did not go unnoticed in the automobile market.
A good power plant, an indestructible gearbox, simple electrics and a completely adequate suspension - these are the main advantages of the car. But the salon is not included in this list. Everything here is overly simple and somehow ascetic. One of the biggest disappointments for the owner will be the seats. They are somewhat shapeless and not very attractive in appearance. The seating position in the car is deep, so visibility is not the best unless you are 190 cm or taller. Not everyone can get comfortable behind the wheel. And the position of the steering wheel is quite strange, it requires a higher position for comfortable control. However, this problem can be solved quite simply - by purchasing, altering and installing seats from a good foreign car. Today we will determine which seats from foreign cars are suitable for the VAZ 2110 and the entire tenth family of domestic cars.
Refill containers
- Fuel tank (including 5 liter reserve) - holds 39 liters of gasoline
- Lubrication system (including oil filter) - holds 3.75 liters of oil
- Engine cooling system (including interior heater) - 9.85 liters of antifreeze
- Washer reservoir - 2 liters
- Gearbox housing - 1.35 liters of transmission oil (semi-synthetic GL-5 75W90) / for a 5-speed gearbox - 1.59 liters
- Rear axle housing - 1.3 liters semi-synthetic GL-5 (75W90)
- Clutch hydraulic system - 200 ml
- Brake system 660 ml
Rear sofas - what to replace them with in the VAZ 2110?
If everything is approximately clear with the front seat options, then the rear sofas require a special approach. We are talking about an unconventional size and rather strange types of fastening of a sofa from AvtoVAZ. If you are far from automotive, it is better not to modify the rear seats yourself. For this you will need the help of specialists. It is important to find a car of the same size, as wider cushions and backrests will have to be redesigned. The installation process is quite complicated:
- you need to choose good rear sofas from models such as Volkswagen Polo, Hyundai Solaris, KIA Rio, Renault Logan, and you can also pay attention to Toyota Corolla;
- Next comes the dismantling of the seats of your car, which is not particularly difficult - just unscrew a few fasteners to get all the structural parts without any difficulties;
- Next, you should try on new seats, it is quite possible that you will have to order their re-upholstery at a studio, since it is very difficult, and sometimes impossible, to guess the size perfectly;
- the next step is the installation of fasteners, it is necessary to remove the fastening parts from the VAZ seats and rearrange them on the purchased pillows and backrests for high-quality fastening;
- after that, all that remains is to install the finished seats in place and enjoy the updated interior of your car, also don’t forget to take a photo and share it on the forums and in the logbook.
Of course, this sounds much simpler than it is done. The process may take more than one day, especially if the seats need to be altered, shortened or lengthened. When choosing seats for the rear of a car, it is best to buy a whole interior set. This will help significantly reduce the cost of further alterations. After all, if you install chairs of different colors, you will have to sew covers or change the upholstery and spend extra money.
Rating of car covers
Car upholstery gets dirty easily. It is enough that the spilled drink is absorbed into it. For this reason, investing in car seat covers seems like a good choice, especially since they also protect the seats from minor damage such as cigarette ash. Having well-maintained and undamaged upholstery will definitely increase the value of your car when you decide to sell it. So, let's find out which car covers are best to choose?
Leader Accessories Seaton
It's made from faux leather, so no one was harmed in the making of the cases, but it has all the benefits of real leather. The cover is made of soft perforated faux leather with foam padding that is waterproof, durable and breathable.
It's super easy to clean. Simply wipe and air dry. The covers come in universal sizes so they fit most makes and models of cars. They are also side airbag compatible and have a seatback storage pocket.
Pet BarksBar
This good car seat covers are made of high quality heavy duty polyester. The triple layer should make them ultra-waterproof. They have a quilted pattern that provides comfort. Their built-in rubber non-slip pad and seat anchors prevent slipping once installed.
They will also never stain your seats because they are designed with color-resistant material. The cover is very easy to install and even easier to clean. You can throw it in your washing machine and wash with powder.
FH Group
The case has a bold design with bright color blocks. The seat covers are made of high quality fabric with three millimeters of breathable foam. This foam helps dissipate heat and keep you cool even on long trips.
The cover stays in place with hidden Velcro and adjustable straps. These features make installation and removal easy. The cover also has a universal fit, allowing it to work on most car seats. For added convenience, the seat covers are machine washable and air dryable. Despite the low price, this set includes covers for two seats and two headrest covers.
EDEALYN
The case is made of durable leatherette. Many people add this product to the rating of eco-leather car covers, which indicates its quality and reliability. The inside of the cover is made of highly elastic sponge and insulated fabric, so it is very comfortable to sit on it for a long time. Silicone is added to the bottom so the case does not slip. Additionally, the cover has straps that keep the seat in place no matter the wear and tear.
Unlike covers that fit over the entire seat, this one is compatible with side airbags, so you don't have to worry about the airbags malfunctioning in a crash.
HAMRON
Stylish covers that give the interior a sporty look while protecting the seats.
The set includes front seat covers, a rear seat cover and five headrest covers. The universal size makes the covers suitable for most cars, and at the same time they are adapted to side airbags.
Sojoy IsoTowel
This car seat cover has a universal shape that fits most car seats.
With an adjustable, buckle-type, non-slip silicone surface, the case always stays in place.
Quick-Dry Microfiber Seat Protector
These good car seat covers are always at the right temperature, keeping you cool on hot days and keeping you warm on cold days.
The case is made of microfiber with a silicone backing that holds the case in place.
Motor Trend M284
Thick, stretchy and waterproof, neoprene seat covers are 100% waterproof and designed to fit virtually any vehicle.
They are adapted to side airbags
A car seat cover can help protect your car's interior and keep it looking great for longer. Car seat covers can protect your seats from stains, dirt, and sweat. They come in a variety of materials, including leather, faux leather, microfiber and neoprene.
We've reviewed dozens of car seat covers to find the best one - Leader Accessories Seaton. This is a fairly inexpensive, convenient and durable case.
Using WD-40 or oil
The most common, but almost always effective method. In most cases, difficulties in removing head restraints occur due to rust starting or the retainer getting stuck in the grooves of the pin. This can be corrected with a special lubricant, popularly called Vdshka. The principle of its operation is simple, it softens the rust and makes the surfaces more slippery, due to which the friction force increases and the headrest is simply pulled out.
You can also remove head restraints on Priora using oil. WD-40 is naturally better because it is faster and softens rust better, but if there is only oil left in the garage, you can use that too. The application procedure is similar.
Comments 14
Jack to the rescue
In a related topic, the boys can’t remove the windshield wiper trapezoid, but here they even have headrests #oops. But it seems that everything was not simple, I still love my car))))
Press the pins (clamps on the backs where the headrest pins go in) with 2 hands at once, and pull the headrest up with the third. Just don’t ask where to get a third hand))
Don't be afraid, pull up
With acceleration and a mighty “Woohoo!”
You jerk sharply upward. But keep in mind that any traffic cop will happily punish you if you drive without them
Yes, I did it just to put on the covers.
When I put on my covers, I lifted the back of the industrial cover on the front seat and removed the headrest clamps. In my opinion this is much easier.
Is it a lot of hemorrhoids to remove the factory cover?
No, you don’t need to remove it completely, just the back part. Later you lift it up and see these fasteners, take it off, put on a new cover, put the headrest in place and the fasteners, then fix the old cover, and later the new one.
Got it, thanks for the advice
First, let go down, and then with a small jump up. And everything will be removed!
And if it doesn’t work (((spray on the blue rods with a VDshkoY and keep pulling)))
READ How to Remove the Gearbox on a VAZ 2112
Essentially, the design of Russian cars is made in such a way that everything in them can be taken out and repaired without making a huge effort. But because it is not always possible to remove the headrests on a Priora VAZ 2110 without difficulty, and sometimes it doesn’t work out at all, we have prepared a set of tips. By following them, you can remove the headrest as easily as putting it back in place later.
Let's sum it up
The procedure for installing more comfortable seats in the VAZ 2110 is quite acceptable. This is a good opportunity for every car owner to make their vehicle more comfortable, beautiful and enjoyable to use. But for this you need to find smart products and a good craftsman. Seats on disassembly do not always inspire confidence. Many of them are smoked, some have broken plastic adjustment knobs, frayed fabrics or altered shapes
Therefore, you should buy seats carefully, checking all the factors. It is better to agree with the seller that you will return the seat if it turns out to be of poor quality
The process of installing a new seat on a VAZ 2110 is quite complicated. But the most difficult process will be the digestion of the fastener. If you entrust this work to a specialist, you will not experience any significant problems with further actions. The choice of chair is important. Don't go for the width of the back and leather trim. It is better to buy simple and practical products from a reputable manufacturer. Such products will serve you for a long time and will not cause trouble in the future. What kind of seats would you like to put in your car?
General selection conditions
- Condition: new or used. New seats are more expensive but will last longer. Every year, thanks to modern technology, seats become more comfortable and have new functions. Used seats can be purchased if your car breaks down.
- Manufacturing company. The 2114 also fits seats of other VAZ models and domestic brands, as well as seats of foreign cars.
- Additional options. Headrest, armrests, lift make the seat more comfortable and safe.
- Completeness. Basically, if you are buying used seats, you need to check for the mountings and accessories.
