Examination of brake discs for VAZ-2110. Disco for "ten"

Many owners of Nines and Tens would probably like to purchase alloy wheels for their VAZs. Indeed, this type of external tuning is the least expensive and can be easily done even with your own hands. Alloy wheels on the VAZ 2109 and VAZ 2110, without problems or any negative consequences for the car, can be installed in three sizes: R13, R14 and R15.

You can, of course, try to fit “rollers” with a larger diameter, but at the same time you cannot avoid serious alterations in the design of the car, which will additionally cost the car owner a “tidy” sum.

At the end of this article you will find a table with the sizes of tires and alloy wheels that can be installed on VAZ 2108, 2109, 21099, 2110 cars.

It is also worth paying attention to our visual tire calculator.

Below we have described the main advantages and disadvantages of various combinations of tires and rims for VAZ 2109 and VAZ 2110 cars (and their modifications), which can be installed without any modifications to the car.

What wheels were installed on different car bodies and configurations?

The factory equipment of the car is limited to the installation of stamped wheels. They have good performance in terms of strength, service life and wear resistance. However, as far as appearance is concerned, there is still room for work.

By the time the LADA 2110 was released, the automotive market was already filled with various alloy wheels of various sizes. The best option is to install alloy wheels, which are attractive and durable.

Before purchasing new disks, you must remember that not every disk may be suitable for a car. The product is selected based on the parameters determined by the vehicle manufacturer. The bolt pattern, the size of the central hole and the nuts that will secure the disk are taken into account.

And that's not all - the territorial conditions (climatic features) in which the car will be operated are also considered, as well as the external data of disks from various manufacturers.

The AvtoVAZ plant installed stamped wheels in black or white with the following standard parameters:

• bolt pattern 4x98, which indicates that the disk model is fastened with four studs, each 98 mm long
• departure ET35

The Ten is a universal model, the wheel arches of which allowed the installation of wheels with dimensions from R13 to R17. Car owners installed beautiful alloy wheels from well-known brands, which made the car even better.

Changing wheels

During operation, alloy wheels can be damaged, so they need to be restored or replaced with new ones.

Alas, the peculiarity of “casting” is that if the damage is severe enough, it is not possible to restore it. And it is not always advisable to try to restore the rollers, since this procedure can be even more expensive than buying a new set.

Please note that aggressive driving through holes and potholes is dangerous not only for the wheels themselves, but also for the suspension. After all, during an impact, all its energy is transferred through the disk to the suspension. This is not typical for stamped steel analogues. They themselves are deformed, but do not harm the suspension.

Damage to stamping

It is recommended to replace a damaged disk at a service station that is equipped with special equipment. The wheel may get stuck, and it will be impossible to remove it manually in your garage.

Contact a workshop for restoring skating rinks. Ask how much this procedure will cost and estimate the cost of a new kit. This way you will understand what is best to do in your particular case. Self-recovery is impossible for the simple reason that it requires appropriate experience, tools and expensive equipment. There is no point in purchasing it for a one-time restoration.

The main disk manufacturers whose products are set to ten

• Most VAZ 2110 representatives are equipped with products from the Russian manufacturer KiK. The brand is quite popular due to its huge assortment, as well as its design developments in the field of creating discs.

• The next popular manufacturer is Vicom, which produces sports products. The company was created on the basis of the Institute of Metals and Alloys, has its own production technology and produces interesting specimens with twisted colored knitting needles.
• The Krasnoyarsk SKAD plant produces wheels that are exported to other countries. The assortment is not very huge, but due to the mass production of disc models, the plant can set a minimum price for the product.
• Slik products have been supplied to the Russian automotive market for three decades now. The assortment is quite wide, here you can find exclusive items, wheels for high-speed travel and off-road driving.
• The very young brand IFree began its work in 2010 and has gained a certain respect among car owners.

These manufacturers produce products that provide the optimal solution for the driver: an affordable model price and its acceptable quality.

Advantages and disadvantages of low profile tires

With low-profile tires installed, the vehicle's maneuverability and controllability are significantly improved - this is especially noticeable when cornering. The steering wheel becomes “sharper” and the car practically does not deviate from the trajectory due to the fact that the low sides of low-profile tires crumple less under lateral loads on the tire.

But when driving on a bad road, such wheels transfer much more shock loads to the body than standard-sized tires, and absorb various road defects less well.

It is worth noting that a tire with a low profile is quite easy to “punch” to the disk even on a small pothole and at low speeds, and the edge of the alloy wheel can become wrinkled and completely fail when using such tires.

Also, it would not be amiss to mention that according to traffic rules it is prohibited to operate vehicles with tires whose characteristics do not correspond to the vehicle model. However, experience shows that traffic police officers usually have a calm attitude towards tuned VAZs with alloy wheels “14”.

And this is not surprising, because R14 wheels are standard equipment on cars of the VAZ 2110 family, the chassis of which is similar to the VAZ 2108, 2109, 21093 and 21099 models. But with R15 alloy wheels, the likelihood of running into trouble when passing a technical inspection is much higher.

What kind of disks can be installed?

Too huge a range of products can confuse the most experienced auto expert. Therefore, before purchasing a product, you need to familiarize yourself with the characteristics of popular discs, as well as know which countries produce them and are popular. What products are suitable for the LADA 2110 car?

• Domestic production. When creating models, the low quality of the road surface and the significant load on the wheel are taken into account. The product combines durability, reliable design and affordable cost compared to analogues from imported manufacturers.
• China. They became famous for their low cost and poor performance characteristics. At the same time, on the Chinese market for domestic use, there are product samples that are not inferior in their characteristics to well-known global brands. Many car enthusiasts order wheels online, which does not always pay off.
• Türkiye. Pretty good disk options. They have good quality, durability and stylish design. Quite suitable for our roads. As for the cost, they are much more expensive than Chinese and domestic manufacturers.
• Asian countries (South Korea, Taiwan, Japan). They have high technical characteristics and are reliable in operation. But the price of the product is very high.
• European brands and USA. Due to the high cost, wheels from these manufacturers are almost never found on our VAZs.

The best all-season tires for the VAZ-2110

All-season tires are in particular demand among Russian drivers. It allows you to use one set for a long time, without wasting time on off-season “change of shoes.”

The performance properties of the rubber compound enable these tires to function normally in the summer and winter seasons.

Kama-365 (NK-241)

Description of the tire. The model is characterized by large tread blocks located diagonally, as well as deep recesses designed to drain snow and water.

Powerful shoulder blocks reliably hold the car on wet or muddy roads. The wide slots of the grooves separating them contribute to good maneuverability on dirt roads or snowy sections of the road.

The robust design of the model, made of high-quality steel, as well as the seamless production technology of a synthetic breaker, makes the tire resistant to deformation.

Two central powerful stiffening ribs allow the driver to maintain directional stability in various driving modes.

The rounded transition from the tread to the side allows the rubber to instantly respond to steering inputs and improves control.

Pros of Kama-365 (NK-241)

1. Low noise level.
2. Reasonable price.
3. Predictable control.
4. Elastic tire at slightly sub-zero temperatures.
5. Long service life.

Cons of Kama-365 (NK-241)

1. Defective products are received.

Maximum and minimum possible parameters of non-standard disks

The most acceptable option for mounting on a VAZ 2110 is considered to be alloy wheels. When choosing alloy wheels, you need to consider the following parameters:

• R – disk diameter;
• J – rim width;
• ET – indicates departure;
• Dimensions of tires mounted on the rim;
• the diameter of the central hole is 58.5 mm;
• the diameter of the circle on which the bolts are fixed is 98 mm.

All these indicators may vary depending on the selected model. For example, for 13-inch wheels the width ranges from 5 to 5.5 with an offset of 35 - 35. On 14-inch wheels the width increases from 4 to 6, respectively, and the offset decreases from 45 to 35. For 15-inch models the values ​​are different .

Compliance with these values ​​is very important. Otherwise, you can get into a lot of trouble driving your car on the road. A car with small wheels still doesn’t look as stylish or presentable.

The best winter non-studded tires for the VAZ-2110

Warm winters have become a common occurrence in Russia. In the absence of roads with ice in such conditions, friction tires come to the rescue of motorists.

They reliably contact the winter road with their dense, pronounced checkers.

Belshina Artmotion Snow

Description of the tire. The symmetrical model is distinguished by a directional arrangement of contact spots on the tread, diverging from the middle stiffener rib.

The classic V-shaped layout ensures confident vehicle control on a winter highway and helps maintain speed limits.

Along the entire profile, zigzag lamellas are placed on the surface of the contact blocks. Their numerous edges cling to the road surface, providing reliable grip on the road.

Solid lugs of the edge zones ensure good maneuverability of the vehicle. Wide grooves separating them prevent movement and reduce wear.

Longitudinal channels and numerous recesses located across the entire width of the profile remove snow and water from under the wheel.

Pros of Belshina Artmotion Snow

1. Soft, comfortable for driving on uneven roads, rubber material.
2. Good maneuverability.
3. Reliable movement on slush, wet asphalt, and snow.
4. High-quality braking.
5. Affordable price.
6. Durable material.

Cons of Belshina Artmotion Snow

1. Uncertain behavior in a rut.

Viatti Brina V-521

Description of the tire. A complex tread pattern that helps to confidently “hold” the car on any type of winter road, an effective drainage system – these are the characteristic features of the model of the Russian company.

The quality of grip on the road is ensured by a mixture specially developed for the model, as well as numerous sipes.

The elastic material of the contact blocks fits tightly to the track surface, and the edges of the slots tenaciously hold the road surface.

The contact spots located on the outer zones are equipped with an additional layer, which enhances their strength and allows the vehicle to maintain stability on turns and when changing lanes.

Multidirectional arrangement of tread grooves makes it possible to reduce noise levels and improve acoustic comfort.

Pros of Viatti Brina V-521

1. High-quality compound - does not harden at low temperatures.
2. Good directional stability.
3. Passable tires that do not get buried in the snow.
4. No slipping at the start.
5. Acceptable price.
6. Excellent handling.

Cons of Viatti Brina V-521

1. Doesn't like getting into ruts.

The owners of these Velcro tires have no comments about the manufacturing company. They recommend the product for purchase.

Wheel alignment

After replacing wheel rims, the dimensions and bolt patterns of which differ from those provided for by the design of the VAZ 2110, it is necessary to make all the necessary adjustments in order to ensure reliable protection of the entire chassis, as well as tires and arches.

Correct alignment angles are required for each front wheel. There are three parameters that require correct installation: wheel toe, caster angles of the steering axles, and camber angles of each wheel.

Wheel installation options

The rules by which the parameters of the front wheel are set are as follows:

• You won't go far if everything hangs out the way it wants, and the car is pulled to the side when it should be going straight. To ensure the stability of each front wheel, they are installed strictly at the required angles to the body and suspension elements. This is called the longitudinal inclination angles of the turning axis. Installation dimensions are indicated in the instruction manual;
• Camber is the angle between the plane in which the wheel rotates and the vertical. The camber bolt helps install it (it secures the telescopic strut and steering knuckle). If the camber is installed incorrectly, the car “steals” and the tire tread wears out more on one side;

  Wheel installation options

• The angle between the longitudinal axis of the car and the plane of rotation of the wheel is called toe. It is toe that is responsible for the controllability of the front wheel when cornering and at different speeds. If the toe is set incorrectly, there is severe lateral tire wear, tires squeal when cornering, and even increased fuel consumption.

This is interesting: What kind of bolt pattern is on the Aveo 250

Select your year 2110 1.6i 16V 2110x

The VAZ 2110 1.6i 16V 2110x model was produced from 2004 to 2015. Table of factory and suitable tire sizes VAZ 2110 1.6i 16V 2110x.

Despite the fact that this information is taken from the websites of auto manufacturers, our catalog is for informational purposes only and does not guarantee full compliance of the proposed sizes with your car.

Source