Will find the answer: How to Turn off Grant's Seat Belt Alarm?

Activation of functions via elm327 and ddt4all

Using the ELM327 adapter you can change some parameters, for example:
SEE. all functions with ELM327.

ps the article will be updated as new features appear.

What secret functions of LADA do you know?

25 4

Found an error? Select it and press Ctrl Enter..

They made a motorhome based on the Lada 4×4, you can buy it

Review of Lada Largus armrests (reviews, installation)

The colors of the Lada Vesta station wagon have become known

Correct sound insulation of Lada car doors

Hidden menu mms lada xray

To exit to the “TEST MODE” menu you must:

Open a window with the system version (Settings -> Scroll down -> System version).
Consistently click on certain places on the radio screen.
A dialog will appear in which you need to enter special codes that open access to the hidden capabilities of the system (for example, go to the desktop, display information about the versions of all components in the system, etc.).

We talked about this in detail earlier.

Self-check the condition of the alternator belt

Before replacing an implement belt, drivers should perform a visual inspection to determine if replacement is necessary. To perform diagnostics, the vehicle must be stationary. To prevent the car from rolling during inspection, clamps should be installed under the wheels. The generator belt is located in the engine compartment, and is tensioned on the pulleys of the attachment.

The entire product must be checked. Having examined one area, inspect all the others sequentially, turning the belt. You can make a mark at the place where the inspection began.

Testing the instrument cluster

To perform an autotest of the instrument panel, hold down the daily mileage reset button and turn on the ignition. The instrument panel arrows will swing a few times and all indicators will light up. The test will end automatically.

For Lada Granta/Kalina/Priora:

On Vesta this is done like this:

Turn off the ignition;
Press and hold the “up” button of the on-board computer;
Turn on the ignition;
All hands should make a full move, and all indicator lamps should light or flash.

Secret menu mms lada vesta

Few people know that Vesta’s standard multimedia system has a secret service menu. It contains the following functions:

Software – software version, firmware, etc.
System status – system status.
Data save – saving data.
Key test – key test.
Fan test – fan test.
Decoction test
Initialize – initialization.
RVC test
Diagnostic - diagnostics.
Screen Adjust – screen adjustment, calibration.
GPS test – GPS test (satellites).
Activation Mac – Mac activation.
Screen test – screen test (you can make it dark so it doesn’t glare).
Backlight test – backlight test.
Can test – Can test.

New Lada: Replacing the timing belt on LADA cars with a 16-valve engine » Lada.Online - all the most interesting and useful about LADA cars

We told you how to get to this menu here.

Causes and their elimination

Check the electronic unit first. It is located under the hood in the same housing with the hydraulic accumulator.

You can recognize it by the large number of brake pipes. It contains the electronics and connector. Disconnect it by first turning off the ground, or removing the negative cable from the battery. Inspect the connector to see if water has entered it or if the contacts are damaged. It happens that the contacts oxidize, despite the protection, water or dirt gets in. If moisture is detected, blow, dry, clean.
Check the fuses that supply power to the ABS unit. There may be several of them, replace the faulty ones.
Next you will need a car lift or pit. Inspect the wires that go to the wheel sensors to see if they are damaged. The sensors are screwed into the hub, and the wires are dangerously close to moving parts.

It often happens that they fly off the mounts or get rubbed by the wheel or turning elements. Check the wires and connectors - everything should be in good condition. ABS wheel sensors are made with a wire and a connector at the end. Make sure there is no moisture, dirt or rotted oxidized wires.
If everything is in order, but the ABS light is still on, you will have to contact a car service. An error in the anti-lock braking system cannot always be resolved by simply removing the battery terminal. Usually the light comes back on if the problem is not resolved.

If you have repaired the ABS problem yourself, in most cases the light will go out after a few trips with the brake pressed. If everything is in order, the system will see this and turn off the lamp.

This is all the information related to self-diagnosis. It’s unlikely that you’ll be able to find anything else on your own. A good car service center will connect a scanner to your Lada Granta, which will be able to read the system and identify the cause. Most often the sensors or control unit are to blame. Subscribe, good luck to everyone on the roads, look forward to many more interesting things!

FakeHeader

Comments 20

Thank you, it worked)))) and the norod drives with plugs))

By the way, the buzzer turned off not because of the belt, because... I always fasten my seat belt, but because of the disgusting squeaking of other actions, you can’t imagine anything more disgusting, mother of designers.

I tried it, it doesn't help. When you turn off the car and remove the key, this shutdown is canceled. I even tried to fill it with sealant, it didn’t help, it still squeaks loudly. Then somehow an awl rested against the hole of the buzzer, it went silent, and the volume of the sound changed depending on the force of pressing. And that’s it, I found a small screw, and gradually screwing it in, I lowered the sound of the buzzer to the point that it can only be heard if you drive into the garage, lock yourself in the cabin, turn off the engine, turn everything off and listen carefully. Everything functions, but you just can’t hear him. I recommend it guys, I tested it personally, I guessed it myself, I haven’t seen, read, or heard of this method anywhere.

The sound of an unfastened seat belt Lada Vesta

Lada Vesta cars are equipped with a buzzer (alert signal) about the unfastened seat belt of the driver and front passenger. Depending on the year of manufacture of the vehicle, the front passenger may not have a buzzer. The buzzer sounds at speeds above 20 kilometers per hour and notifies the driver or passenger that the seat belt is not fastened.

In addition to the cases listed above, this buzzer can also be triggered by a small load lying on the front passenger seat, which can cause a lot of trouble for car owners who are involved in transportation. Luckily for them, you can turn off the seat belt sound yourself.

The sound of the buzzer when the seat belt is not fastened, how to turn it off on the Lada Vesta yourself

ELM scanner with bluetooth version no higher than 1.5 (may not work on higher versions)
EcuTweaker app (download)
Smartphone with Android operating system

We connect the ELM scanner to the Lada Vesta, and install the downloaded application on the phone. We launch the application file with the .apk extension through the phone’s file manager, and copy the “ecu” archive to the root of the phone’s internal or external memory without unpacking it. We launch the application and connect to our scanner via bluetooth and press the Meter Cluster button:

In the next window, select PP_Vesta:

In the screen selection window, click Settings 1:

We get to a page with various settings, one item of which will be the sound of an unfastened seat belt. We move the working area of the screen to the right and find the drop-down list opposite the option we need:

In the list, select the line “RB sound is turned off” and press the Write zoomer button. The seat belt buzzer sound is now deactivated.

Controlling ESP on Lada Granta/Kalina from a key fob

A variant version has remote control of electric window lifters. Power windows are controlled using the remote control buttons when the ignition is off. The windows are raised while the lock button is held down for more than three seconds. The windows of the front doors are raised first, then the rear doors.

The windows are lowered while the unlock button is held down for more than three seconds. The windows of the front doors roll down first, then the rear doors.

How to turn off the DRL without interfering with the wiring

On LADA cars, daytime running lights light up automatically after the engine is started. In some situations, there is no need for DRLs to operate (for example, during auto start at night).

To disable the DRL on LADA cars (Granta, Kalina and Priora), in which the light is controlled using the MUS (lighting control module), you should set the block knob to the middle position between the “circle” and “dimensions”.

To turn off the DRL on LADA cars (XRAY, Vesta and Largus), in which the light is controlled using the left steering column switch, you should similarly set the position of the regulator to an intermediate position.

On LADA cars, daytime running lights light up automatically after the engine is started. In some situations, there is no need for DRLs to operate (for example, during auto start at night).

Grant's seat belts. Silence the buzzer in 5 seconds

Any grant manager is most likely sometimes annoyed by the squeak of an unfastened seat belt. There are a lot of reasons why a driver drives unbuckled (reparking, driving a couple of hundred meters to buy bread, someone simply never fastens their seat belt, but just puts on a belt in front of the traffic police post.), so we won’t focus on this.