Share with your friends:
Here is a complete catalog of Lada Vesta lamps. It included lamps for headlights, taillights, dimensions, and interior lighting for the Lada Vesta. Dimensions, technical specifications and ECE designations are provided for all lamps. All Lada Vesta lamps are accompanied by their image.
- 3.1 — Brake signal and side light lamp;
- 4.1 — Reversing lamp;
What kind of lamps are on Vesta?
The following lamp models are installed on the Lada Vesta passenger car:
- Lamp H1 power 55 W;
- Bulb H7 55 W;
- Lamps РY21W with a power of 21 W;
- Lamp W21/5W with a power of 21/5 W;
- Bulb P21/5W with a power of 21/5 W;
- WY16W lamps with a power of 16 W;
- Lamp W16W 16 W;
- Bulb W5W 5 W;
- H16 lamps with a power of 16 W.
Below you will find detailed information about where and what kind of lamp is installed.
Car interior reupholstery
Published: June 16, 2018
Spread the love
Spread the love Do-it-yourself car interior reupholsteryContents1 Do-it-yourself car interior reupholstery1.1 Car interior reupholstery1.2 Do-it-yourself car interior reupholstery1.3 Do-it-yourself car interior reupholstery Master class1.3.0.1 More articles about cars A car is a very practical means of transportation, especially long distances with family. Of course, traffic jams and difficulties with parking overshadow the joy of ownership. One of the factors highly valued by car owners is ...
Car interior reupholstery Read more »
Headlight bulbs
Low beam lamp Lada Vesta
Lamp design:
Designation of low beam headlight bulb according to EEC - H7
Technical characteristics of the Lada Vesta low beam headlights:
- Power - 55 W;
- Halogen lamp;
- The lamp base is metal;
- The color of the flask is colorless;
Dimensions of the H7 low beam lamp for the Lada Vesta headlights:
- The diameter of the flask is 11 mm;
- The size from the tip of the flask to the seat is 41 mm;
- Lamp height - 57 mm;
Installation location of H7 low beam headlight bulb:
The car is equipped with 2 H7 low beam bulbs for Lada Vesta headlights.
High beam lamp
Lamp design:
Designation of the high beam headlight bulb according to the EEC - H1
Technical characteristics of the Lada Vesta high beam headlights:
- Power - 55 W;
- Halogen lamp;
- The lamp base is metal;
- The color of the flask is colorless;
Dimensions of the H1 lamp for the main beam of the Lada Vesta headlight:
- The diameter of the flask is 8.5 mm;
- Base height - 18.5 mm;
- The height of the flask is 19 mm;
- The size from the tip of the flask to the seat is 44 mm;
Installation location of headlight high beam lamp H1:
The car has 2 H1 bulbs for the Lada Vesta high beam headlights.
Electric turn signal lamp
Lamp design:
Designation of the turn signal lamp according to ECE - РY21W
Technical characteristics of the Lada Vesta turn signal lamp:
- Power - 21 W;
- Incandescent lamp;
- The lamp base is metal;
- The color of the flask is colorless;
Dimensions of the Lada Vesta turn signal lamp:
- The diameter of the flask is 26.5 mm;
- Lamp height - 52.5 mm;
Installation location of the PY21W turn signal lamp in the headlight:
The car is equipped with 2 PY21W turn signal bulbs for Lada Vesta headlights.
Daytime running light and side light lamp
Lamp design:
Designation of light bulb dimensions according to EEC - W21/5W
Technical characteristics of Lama Vesta fret dimensions:
- Power - 21 and 5 W;
- Incandescent lamp;
- The lamp base is glass;
- Filament - 2 pcs;
- The color of the flask is colorless;
Dimensions of the W21/5W lamp dimensions of the Vesta fret:
- The diameter of the flask is 20.5 mm;
- Lamp height - 43 mm;
Installation location of the W21/5W size lamp in the headlight:
The car is equipped with 2 W21/5W bulbs of the dimensions of the Lada Vesta headlights.
Why do light sources burn out?
There are four main reasons why lamps in a Lada Vesta can burn out:
- Increased tension. Most often, it is caused by a breakdown of the generator or voltage regulator relay. Because of it, the voltage in the network increases and causes the light source to fail.
- Bad roads. They are not the source of light bulb failure. They just shake the tungsten thread and tear it. Because of this, the lamp stops working. Unfortunately, this is inevitable.
- The car owner touched the bulb with his fingers, which caused rapid wear of the light source.
- Using cheap Chinese lamps that have a short service life.
Tail lamps
Brake and side light lamp
P21/5W stop lamp design and dimensions:
Designation of the clearance and stop lamps according to EEC - P21/5W
Technical characteristics of llama dimensions and stop frets Vesta:
- Power - 21 and 5 W;
- Incandescent lamp;
- The lamp base is metal;
- Filament - 2 pcs;
- The color of the flask is colorless;
Dimensions of lamp P21/5W dimensions and stop frets Vesta:
- The diameter of the flask is 26.5 mm;
- Lamp height - 52.5 mm;
Installation location of the P21/5W stop and clearance lamp in the rear outer fanlight:
The car is equipped with 2 P21/5W bulbs for the dimensions and stops of the rear external lamp of the Lada Vesta.
Electric turn signal lamp for rear exterior lamp Lada Vesta
WY16W lamp design:
Designation of the direction indicator bulb of the rear external lamp according to ECE - WY16W
Technical characteristics of the turn signal lamp of the rear external light of the Lada Vesta:
- Power - 16 W;
- Incandescent lamp;
- The lamp base is glass;
- Filament - 1 pc;
- The color of the flask is orange;
Dimensions of the WY16W turn signal lamp for the rear exterior light of the Lada Vesta:
- The diameter of the flask is 20.5 mm;
- Lamp height - 44 mm;
- Filament width - 11 mm;
Installation location of the WY16W turn signal lamp of the rear exterior light:
The car is equipped with 2 WY16W turn signal bulbs for the rear external light of Lada Vesta.
How to easily change a tire without a jack
Published: 01/08/2019
Spread the love
Spread the love How to change a tire without a jack in a simple way Quite often there are situations when a tire breaks on the road. While changing a wheel, it turns out that the jack is broken or left in the garage. When you try to stop someone to ask for help, no one stops. We have to figure out how to get out of the situation. I'll give you some simple advice: how...
How to easily change a tire without a jack Read more »
Electric lamps for the rear interior light
Reversing lamp
W16W rear interior light bulb design:
Designation of the reverse lamp of the rear interior light according to ECE is W16W
Technical characteristics of the reversing lamp of the rear internal light of the Lada Vesta:
- Power - 16 W;
- Incandescent lamp;
- The lamp base is glass;
- Filament - 1 pc;
- The color of the flask is colorless;
Dimensions of the W16W reversing lamp of the rear internal light of the Lada Vesta:
- The diameter of the flask is 15.7 mm;
- Lamp height - 37.8 mm;
- Base width - 9.5 mm;
Installation location of the W16W reversing lamp of the rear interior light:
The car is equipped with 1 W16W rear light bulb for Lada Vesta.
Electric lamp for side light of rear interior light of Lada Vesta
W5W lamp design:
EEC light bulb designation - W5W
Technical characteristics of the side light lamp of the rear internal light of the Lada Vesta:
- Power - 5 W;
- Incandescent lamp;
- The lamp base is glass;
- Filament - 1 pc;
- The color of the flask is colorless;
Dimensions of the W5W lamp for the side light of the rear interior light of the Lada Vesta:
- The diameter of the flask is 10.3 mm;
- Lamp height - 26.8 mm;
- Base width - 9.5 mm;
Installation location of the W5W lamp for the side light of the rear interior light:
The car is equipped with 2 W5W bulbs for the side light of the rear interior light of the Lada Vesta.
Braid on the steering wheel. Sizes, types and features.
Published: 04/22/2018
Spread the love
Spread the love Dimensions of steering wheel braidsContents1 Dimensions of steering wheel braids1.0.1 Size of steering wheel braids 2110 (steering wheel size)1.0.2 Size of Niva steering wheel braids (steering wheel size)1.0.3 Size of Gazelle steering wheels braids (steering wheel size)1.0.4 Braiding of Logan steering wheels size (steering wheel size)1.0.5 Braid on grant size (steering wheel size)1.0.6 Braid on steering wheel dimensions Priora (steering wheel size)1.0.7 Braid on Solaris steering wheel size (steering wheel size)1.1 Table of sizes of braids on steering wheel 1.2 ...
Braid on the steering wheel. Sizes, types and features. Read completely "
Front fog lamp for Lada Vesta
H16 lamp design:
ECE fog light bulb designation - H16
Technical characteristics of the Lada Vesta fog lamp:
- Power - 19 W;
- Halogen lamp;
- The lamp base is plastic;
- Filament - 1 pc;
- The color of the flask is colorless;
Dimensions of the H16 lamp for the Lada Vesta fog light:
- The diameter of the flask is 11 mm;
- Lamp height - 65 mm;
H16 fog lamp installation location:
The car has 2 H16 bulbs for Lada Vesta fog lights.
Characteristics of the Lada X Ray Cross model 2022
The new model line differs from the previous version by the increased diameter of the wheel rims, higher ground clearance and plastic body protection.
New body
Having carefully studied the photo, you will notice that the model differs from its predecessor in small details. This is a slightly elevated body position and aggressive design style. The small front end appears more massive thanks to the high and wide hood and X-shaped radiator trim.
The car features sporty side diffusers, a set of paired fog lamps and a large metal-plastic body kit. The side reveals dynamic and vibrant details to car enthusiasts:
- wheel arches have protective inserts;
- many elements of graceful stepped relief;
- three-section windows are characterized by a black perimeter and extended mullions;
- the roof line smoothly turning into the stern.
The plastic body kit performs protective and decorative functions. The crossover status is also confirmed by the details in the rear of the car.
The improved Lada can be distinguished by the following features:
- the spoiler visor has an enlarged format;
- The high tailgate features oval glazing;
- the rear optics have a different shape and are mounted on wide stands.
The wide body kit of the new model has three reflectors. In the cutouts of the shaped metal diffuser there is a pair of exhaust pipes, eyes and a towbar bracket.
Salon
Since the car has a budget status, the quality of the interior decoration and decoration leaves much to be desired. This is due to the use of several types of fabrics and inexpensive plastic.
Side turn signal lamp
W5W side turn signal lamp design:
Designation of the side turn signal lamp according to ECE - W5W
Technical characteristics of the side turn signal lamp W5W Vesta frets:
- Power - 5 W;
- Incandescent lamp;
- The lamp base is glass;
- Filament - 1 pc;
- The color of the flask is colorless;
Dimensions of the side turn signal lamp W5W Vesta frets:
- The diameter of the flask is 10.3 mm;
- Lamp height - 26.8 mm;
- Base width - 9.5 mm;
Problems
There is one big problem - the risk of burning out the electronics unit, which, by the way, happened to many Vesta owners. For example, if you put LEDs in the DRL of a sedan, then after a short time they will simply stop shining. As a rule, in such cases, the fuses are replaced, which are marked in the instructions with the symbols F16 and F17.
Replacement must be done carefully
However, there are none under the cover that covers the fuse box. In the end, it all ends with a burnt-out electronics unit, which has to be replaced. It's all about the higher resistance of the diodes, which is why Vesta's electronics unit cannot withstand it.
The most unpleasant thing is that this is not a warranty case, so contacting the dealership for a warranty replacement will not help. You have to buy the unit yourself, and it is quite expensive - it is not always possible to find a part even for 8,000 rubles, and sometimes the price tag for an element reaches 19,000 rubles!
Moreover, such a problem can arise not only because of LEDs. If you thoughtlessly select and install components, it is more than possible to end up with a burnt-out unit.
License plate light bulb
License plate light lamp design:
Designation of the license plate light bulb according to EEC - W5W
Technical characteristics of the Lada Vesta license plate lamp:
- Power - 5 W;
- Incandescent lamp;
- The lamp base is glass;
- Filament - 1 pc;
- The color of the flask is colorless;
Dimensions of the Lada Vesta license plate lamp:
- The diameter of the flask is 10.3 mm;
- Lamp height - 26.8 mm;
- Base width - 9.5 mm;
Installation location of the license plate light lamp:
The car is equipped with 1 license plate light bulb for the Lada Vesta.
Do-it-yourself car engine washing
Published: June 10, 2018
Spread the love
Spread the love Wash the engine yourself. If you want your car to have a presentable appearance and serve you longer, you must take care of it. This applies not only to repairs, but also to washing the car. And you need to wash it regularly. There is a car body wash, you can do it yourself, or go to the nearest gas station, there...
Self-washing a car engine Read more »
Electric lamp for the glove compartment lighting
Design of the glove compartment lamp:
Designation of the glove compartment lamp bulb according to EEC - W5W
Technical characteristics of the lamp for the glove compartment lighting of the Lada Vesta:
- Power - 5 W;
- Incandescent lamp;
- The lamp base is glass;
- Filament - 1 pc;
- The color of the flask is colorless;
Dimensions of the lamp for the glove compartment lighting of the Lada Vesta:
- The diameter of the flask is 10.3 mm;
- Lamp height - 26.8 mm;
- Base width - 9.5 mm;
Installation location of the Vesta glove compartment lamp:
The car is equipped with 1 light bulb for the Lada Vesta glove box.
DIY crafts for car enthusiasts
In this article I want to tell you why the LEDs in a car blink and what needs to be done to prevent this from happening. There are many LEDs in the car, everywhere, such as side lights, DRLs, etc.
In ordinary LED light bulbs (car) instead of a driver, only 1 resistor is used, which, firstly, is set to 12 volts, and secondly, it cannot protect the LED from surges in the car's on-board network, so they do not serve us as long as we do I would like to.
In a car's car network, the voltage fluctuates from 12 to 14.4 volts, and sometimes it is higher. So we need to sharpen our LED, or rather, make a driver or stabilizer specifically for this voltage, which will power our LED.
The Internet is full of stabilizer circuits for LEDs, but I want to offer the simplest and most proven one. Of course, you can buy a stabilizer in an online store like Aliexpress, but I assure you that making it yourself is much more pleasant, especially since this circuit consists of only 3 parts, does not require any adjustment and works properly for years. And another important point is that this circuit, unlike the Chinese ones, does not create high-frequency interference that affects the reception of radio stations and listening to music in the car, because it is not a high-frequency pulse device, but a linear stabilizer.
Actually, here is the diagram itself.
Our circuit is designed for a current of 1.5 amperes. That is, simple light bulbs, which, for example, are shown in the figure, will work without any heating of the stabilizer.
But if you connect running lights, you will have to install a heat sink, so to speak, a radiator; you will just need to screw some piece of hardware to our stabilizer so that it heats up less.
The circuit is very simple, designed just for a simple car enthusiast, assembled on such simple stabilizers as L7812 or Krenki, you can take this KR142EN8B. The input voltage can range from 12 to 30 volts, and at the output we will always have a stabilized and constant voltage of 12 volts .
Capacitors can be used from 100 n to 1 uF, they are filters, but if you have never soldered or simply don’t have them, then you don’t have to install them.
This is what I ended up with...
I placed the board in a thermal shrinkwrap and soldered the terminal blocks for ease of connection.
Don’t be lazy and solder such a stabilizer for each of your light bulbs and you will forget about replacing them. Moreover, there is nothing simpler.
Wishing you all the best and peaceful skies above your head.
Popular;
- Linear stabilizer for LED lamps on cars
- Simple voltage regulator on LM317, circuit
- Current stabilizer for LEDs
- The simplest voltage stabilizer for DRLs based on L7812
- How to easily make car lamps brighter.
- Making an LED lamp with your own hands
- Scheme of a simple battery charger with auto shutdown
- DVR in addition to car alarm
Trunk light bulb
Design of the trunk lamp:
Designation of the trunk light bulb according to EEC - W5W
Technical characteristics of the Lada Vesta trunk lamp lamp:
- Power - 5 W;
- Incandescent lamp;
- The lamp base is glass;
- Filament - 1 pc;
- The color of the flask is colorless;
Dimensions of the luggage compartment lamp of the Lada Vesta:
- The diameter of the flask is 10.3 mm;
- Lamp height - 26.8 mm;
- Base width - 9.5 mm;
Vesta trunk light installation location:
The car has 1 light bulb for the Lada Vesta trunk light.
Messages 21
1 Topic by Axel 2016-02-02 15:24:54 (2016-02-02 15:26:09 edited by Axel)
- Axel
- Participant
- Inactive
- Posts: 973
- Thank you: 139
2 Reply from Axel 2016-02-02 15:27:51
- Axel
- Participant
- Inactive
- Posts: 973
- Thank you: 139
Re: Solving problems with limit switches (the interior lights come on while driving)
I myself think that all this should have been adjusted by the official dealer during pre-sale preparation.
3 Reply from falkon 2016-02-02 19:41:43
- falcon
- Participant
- Inactive
- From: Russia
- Messages: 500
- Thank you: 43
Re: Solving problems with limit switches (the interior lights come on while driving)
It’s hard to adjust here without driving the car. But driving someone else’s is not good. You will be the first to be surprised when they give the car back, and not 10-20 km, but 100-200 have already been driven on it.
4 Reply from Tipipip 2016-02-02 20:06:25
- Typetype
- Participant
- Inactive
- Posts: 41
- Thanks: 10
Re: Solving problems with limit switches (the interior lights come on while driving)
At the first maintenance, the DC workers would probably have fixed everything
5 Reply from falkon 2016-02-02 21:10:31
- falcon
- Participant
- Inactive
- From: Russia
- Messages: 500
- Thank you: 43
Re: Solving problems with limit switches (the interior lights come on while driving)
Type, it’s a long time before maintenance, at the first visit to the service. But it’s not worth it; it’s easier and faster to fix it yourself.
6 Reply from Serg 2016-02-17 19:26:38
- Serg
- New member
- Inactive
- Posts: 1
- Thanks: 4
Re: Solving problems with limit switches (the interior lights come on while driving)
Hi all. In general, I had my first little trouble, in the form of sticky door switches. When opening a door (any door), the open door indicator on the dashboard and, accordingly, the interior lamp did not light up. All you had to do was touch the limit switch a little with your finger, and everything returned to normal. After reading on the Internet about how the owners Grant and Kalin also encounter this, I decided that the problem was in the trailer boot itself. In the end, I decided to remove the boot and try to open the door without it. And lo and behold, everything works smoothly without sticking. Upon closer examination of the anther, a small pimple was discovered in the center. That is, because of this little patch, those same 2mm were not enough for the normal operation of the limit switch. It was decided to cut off this pimply with a knife (photos attached). Bottom line: everything works great. No sticking or any delays. Which I was very happy about. I hope the information will be useful to someone.
