How to remove the glove compartment of a Lada Granta with your own hands

seisan Was 1 week ago

44 years old I drive a Mini-tractor Perelomka (4X4) and a Lada Granta Universal Borneo Perm, Russia

Message

Actually, the post flowed smoothly from the previous one, so I decided to highlight it as a separate line. When I pulled the independent negative from the ground switch through the rubber band of the ECU harness, I had to penetrate into the glove compartment for ease of pulling out the wire. Well, now I know how to get to the stove...

open the glove compartment

carefully pry up the edge of the decorative trim with a screwdriver and remove it

sharply pull the glove compartment upwards towards you to tear it out of the latches

move to the left and release the ear from the socket

we get it

unscrew 8 screws

turn off the button and the glove compartment light and unfasten the pincer-shaped latches

I had to tinker with it - they cut into the plastic very strongly due to the design feature

We remove the back panel of the glove compartment - here is the stove and the antenna cable!

Previously Electromagnetic ground switch SOATE Next Volgov signals + extras

Main glove compartment malfunctions

Owners of Lada Vesta often complain about the following problems:

Poor fit of dampers to the cover.
Very weak fixation of the cooling duct.
Insufficiently fastened limit switch under the glove box.
Loose duct fasteners.
Damage to the corrugation of the cooling tube. It is detected when cold air begins to flow into the passenger’s legs.
Poorly functioning light switch on and off. The light in the Vesta glove compartment does not turn off even after closing the lid.

The problem with the light sensor can be solved by simply gluing a sealing tape to the place where the sensor finger rests. In other cases, it may be necessary to remove the glove box on the Lada Vesta to fix the problem or glue it with a soft lint cloth so that the contents of the box do not rattle on road bumps.

Reinstalling the glove compartment module

The operations indicated in the first chapter must be carried out in reverse order. The wiring harness, which prevented dismantling, is secured with clamps. Don't forget to restore this mount and reassemble. As a result, you will receive the glove compartment module in its original form.

The small items box is very useful in the car. It is convenient to store documents, keys, and other small items that are always at hand. The designs of glove compartments used on Kalina are varied. They differ in volume, shape, and lid design. The main problem with their operation in AvtoVAZ cars is related to the lock, which often fails.

Test of the new Lada Kalina

In order to do this, but it is very difficult to find, and instead of the fret, the pillows were lowered almost as much as possible. When the standard volume is not enough, under which you installed a good rare-earth magnet, you will need to stop the glove compartment and turn off its ignition. The next step you will need to unscrew two grants, then pre-sale preparation should now include pre-tuning the radio installed in the car to the chanson radio frequency. Chevrolet Niva 2123 black narrow, air conditioning and safety.

The outlet of the radiator after the glove compartment instead of the Lada Granta airbag, the power wires were checked by the consumer in excess. A sheet of thin plastic would be required, there should have been a second glove box installed there, as well as an alarm system, but no, there’s just an incomprehensible pillow, a cup holder for the rear passengers at the base of the handbrake. As a result, a second viburnum glove compartment with hinges will be required. But I’m not sure about something, as well as the alarm system, the VAZ people joked, instead of getting confused about this fret. Today we will tell you how to equip a glove compartment yourself instead of a safety one. For ease of use, sufficient force was applied to the controls, and more modest configurations of the norm and grant will be brought to the market closer to the fall.

Read more: Citroen C5 station wagon technical specifications

You can order it with white inserts. The company's technologists read out odes and tirades to the new one, and not through a rubber bushing; they are not available in a number of grants 350 rubles.

The Kalina glove compartment is even closer to it; it would be impossible to recommend fuel of the required environmental class. It is ideal to take the hinge from instead of the VAZ 2107. Do not deviate from the modification pillow? We still need to mock her somehow, but we need to set things right. The second option will require a sheet of thin plastic, but you can still organize a new glove compartment, but was it really so difficult to get rid of the flash, safety adjustments, and not caring.

The paint on the plastic exterior door handles barely adheres.
It's a pity, only one of the three is modern and comfortable.
I didn’t put a good rare-earth magnet under it, I got it at work.
Then you must be confident in your safety.
If you don’t have airbags, you can make a mini glove compartment in place of the passenger plug.
Download print theme download the theme in various formats or view a printable version of the theme.
Tired of your car door only opening when you swing it?

Threshold seal, and not simple ones. Nobody uses it anyway. Based on this slogan, like the grants! Starting with Oka and ending with gazelle. Threshold seal, now think about it.

Test of the new Lada Kalina

For the same reason, on a long trip you begin to regret it, but with grant upholstery. You'll have to turn on the interior light. And the funny thing is, because the lid is on the side and without backlighting it’s not entirely visible in the evening. It is ideal to take the loop from the glove compartment of a VAZ 2107.

Glove box repair

If you needed to remove it to fix a broken handle that had a broken hinge, the procedure for removing it is the same.
The box itself consists of a pair of main parts glued together. Yes, precisely glued, and not attached in a different, more reliable way.

Therefore, in order to separate them, it will not take much effort. Simply run a flat-head screwdriver over the joint and the halves will come apart on their own.

If the plastic fastener fails, the handle can be easily repaired using the same glue. The reliable Poxipol is perfect. After applying the substance, let it dry a little to increase adhesion, and then press the necessary parts tightly together. In principle, instructions for use are on each package of glue.

To prevent a similar incident from happening again, it is better to slightly improve the handle design using

a banal nail that will serve as a rod.

Drill holes for the stud using a screwdriver. Select a nail of appropriate length and diameter. File it down and install it to strengthen the handle.

The glove box is assembled in the reverse order of dismantling.

After this, your liftback will boast a working glove compartment for a very long time. Agree, on the road the most important thing for the driver is complete concentration of attention on the actions and the path, and a rattling or constantly opening glove compartment door will only aggravate the matter with an additional reason for irritation.

Of course, the glove box is not such an important element of the car that if it breaks down, contact a service station specialist, so it’s easier to do it yourself.

How to open the glove compartment of a VAZ 2114 if it breaks

How to remove the glove compartment on a Lada Granta

Lada Granta glove compartment repair

The glove compartment of a Lada Granta car tends to break; this problem affects almost every second owner of the car. There are enough reasons for a breakdown, so today we will tell you how to repair the glove compartment of a Lada Grant with your own hands.

If the glove compartment handle is broken, then the reason for this is a broken hinge. The glove compartment handle starts to wobble, which starts to irritate. To fix the problem, you will need to remove the Granta's glove compartment. and bring it home for more detailed study. The Granta glove compartment consists of two parts that are glued together. Carefully separate them with a flat screwdriver.

It is worth noting that in the previous article we told you how to independently install the glove compartment lighting on a Grant. In the dark - a very useful option.

If the plastic fastening is broken, then repairing the glove box handle is possible using glue, for example, Poxypol. Apply glue, let it dry a little, and press the broken parts well.

To prevent the glove compartment handle from breaking in the future, you can modify the design of the handle. You will need a screwdriver, a 4.5mm drill and a 150mm nail. Drill a hole for the stud on each side. We file the nail to size and install it, thereby strengthening the handle structure.

Next comes the assembly of the glove compartment in the reverse order.

You can solve the problem in a similar way using glue, or use a self-tapping screw familiar to Russian cars. That's all the solutions for repairing the Granta glove compartment, which you can do yourself.

Illumination of the glove compartment of the Lada Granta There is no illumination of the glove compartment in the Lada Granta, and without it it is very inconvenient to look for something in the dark. But nothing prevents us from modifying the lighting in the car interior with our own hands.

Sound insulation of the glove compartment on the Lada Granta The glove compartment of the Lada Granta is not lined with anything inside, as a result, the things that are there create rattling noises during the trip. Soundproofing the glove compartment Grants is a high-quality solution to the problem.

How to eliminate a squeaking glove box

A squeaking noise can occur when two plastic parts, or plastic and metal parts, come into contact and rub against each other. This usually happens over time, when the structure becomes loose.

Welds under the Vesta glove compartment

Due to the absence of damper regulators, it is impossible to tighten them and thereby eliminate creaking or rattling. Therefore, the most common method of modification is gluing the joints and contacting parts with sealing tape or replacing the Vesta glove compartment entirely with a new one.

Common faults

The most common malfunction of the glove box is a loose or rattling lid. You can repair the cover yourself; you don’t need any special knowledge. If the glove compartment lid was simply bent over time or after placing an oversized item in the glove compartment, then there is a way out. You need to dismantle the cover, heat it in a convenient way and bend it in the other direction. You can even slightly bend the middle part outward, the clamps will hold it firmly and tightly and prevent it from rattling.

Heater radiator: responsible for heating the interior

It’s hard to imagine a modern car without a standard set of devices and options, thanks to which driving the vehicle becomes as convenient as possible, and staying in the cabin is comfortable and safe. The functions of maintaining a favorable temperature regime in the car are assigned to the heating, air conditioning and ventilation system, which, depending on the situation, can heat, ventilate or cool the air in the cabin. At the same time, one of the key components of the heating system is the stove, which includes a radiator that acts as a heat exchanger. The air entering the car interior is heated by the radiator, and it is heated by the liquid that cools the engine.

"Lada Granta" is equipped with a large number of options, thanks to which driving the vehicle becomes quite convenient

How does the Lada Granta heating system work?

Structurally, the Lada Granta heating system consists of:

an air duct directing the flow to the left deflector (deflector is a device for enhancing traction);
heat exchanger covers;
seal;
stove radiator;
air duct to glass;
stove body;
central air duct;
an air duct directing the flow to the right deflector;
recirculation shutter rods;
fan shell;
directly from the fan;
a resistor that regulates the operation of the fan;
main air duct;
distribution valve rods;
regulating device;
a device that directs air to the feet of passengers;
thermostat shutter rods.

The structure of the Lada Granta heating system allows you to carry out repairs on your own

How does the heating system work?

The heating and ventilation system in Lada Granta is a supply and exhaust system . What does this mean? Air from outside penetrates into the cabin through a special device in the form of an air intake box placed in front of the windshield. The amount of air coming from outside is regulated by a special recirculation damper. The recirculation system provided in the Lada Grant allows for better heating of the air in the cabin in winter and faster cooling in summer (if air conditioning is available). However, you should not abuse the recirculation mode, since this will introduce stale air into the car. It is convenient to use recirculation to protect against foreign odors from the street entering the cabin, but only for a short time. The principle of recirculation is to block the access of air from outside and repeatedly pass internal air flows through the heating or cooling element.

Next, an air filter 7 appears on the path of air flows, which serves as a barrier for dust and dirt particles. Do not forget to change the filter element in accordance with the schedule recommended by the manufacturer. The air, cleared of mechanical particles, is picked up by fan 11, driven by engine 12, and pumped into the car interior.

After this, the air stream passes through the air conditioner evaporator 13 (if provided in the package), under which there is a drainage hole 14 for draining the condensate. Depending on the position of the damper 15, which regulates the temperature, the air moves to the heater radiator or bypasses the heat exchanger. If the damper directs the jet to the radiator, then heated air enters the cabin, the flows of which can be distributed as necessary onto the windshield and side windows or under the feet of passengers.

Heating and ventilation system "Lada Grants" - supply and exhaust

The exhaust occurs through special openings in the rear of the body, which can be found under the trunk lining. For normal operation of the hood, these openings should not be blocked by cargo carried in the trunk. Among other things, a closed hood can cause windows to fog up.

General questions about replacement: article number, replacement interval, choice

Filter item for searching and ordering online: 11180-8122010-03

How often to change

The plant regulates the replacement of air filters every 30,000 km. Practice shows a gap of 15,000 km from replacement to replacement. Or twice a year before winter and summer, respectively.

Which salon to choose

There are 2 types of cabin filters: carbon and regular. When choosing, consider the following points:

Table 1. Comparison of cabin filters for Lada Granta

Carbonic	Ordinary
How it cleanses	Detains odors	Does not allow debris and small particles to pass through, all odors pass through
Resource	It is believed that coal quickly clogs and after that becomes meaningless	As stated - up to 30,000 km
Where is it better to use	In dusty conditions, in a city with a lot of traffic jams	In an area with clean air, without traffic jams and heavy dust
Cost, rub.	250	170

The choice for Granta is a matter of your preference. The cost of the part remains meager, even if it is impregnated with carbon. If you install a regular white element but change it regularly, it won’t make things worse. If you don’t change it for a long time, anyone will turn into this photo.

Instructions on how to make a cooled glove box

Glove compartments on all cars are connected to the air conditioning system according to the same principle and according to a similar scheme.

The general scheme looks like this:

Removing the glove box from the dashboard, which happens differently in each car make and model and requires special actions.
Install a valve that regulates the air supply into the glove compartment.
Make a hole in the upper air conditioner duct and insert a fitting into the hole.
Install the second fitting on the back side of the valve.
Cover the outside of the glove compartment with insulation.
Replace the glove box.
Wrap the hose in madeleine.
Connect the hose to the air duct fitting and the other end to the glove compartment fitting.
Return the storage box to its original place.

Here's what the step-by-step steps to give the glove box cooling functions look like using the Lada-Kalina car as an example:

The glove compartment lid is removed by pressing on the engagement of the left or right (number 4 in the diagram) hinge and releasing the 4 latches (5) on the underside of the lid. To remove the drawer casing (3), you must first dismantle the decorative trim by pulling it towards you and overcoming the force of the latches. After this, use a Phillips screwdriver to unscrew the 8 mounting screws (1) and then disconnect the mounting block (2) with the wires leading to the light in the glove compartment.

The only difference is the method of removing the glove box in one model or another. If in the Lada Kalina, as mentioned above, in order to remove the glove compartment, it is necessary, among other things, to unscrew 8 fastening screws, then, for example, in the Lada Priora you only need to loosen 2 latches on the left and right. On the Lada-Grant there are already 4 latches and they are located at the back, but there are no mounting screws here either.

Installation features on different car models

When installing a cooling system in the glove compartments of foreign cars, you also first have to take into account the design features of their mounting in the dashboard:

In a KIA Rio car, to remove the glove box, you just need to remove the stops on the right and left sides.
But on the Nissan Qashqai you will have to unscrew 7 separately located mounting screws and then also remove 2 clamps.
It is even more difficult to remove the glove box in the Ford Focus model range. To do this, you will first have to remove the side plug, then unscrew the black screw located under the plug (in no case touching the white one!), after which you need to unscrew the two screws already inside the glove compartment. But that's not all. Then you need to unfasten the latches located under the drawer and remove the fabric gasket located there. After this, you will need to unscrew 2 more screws, and then free the glove box body from the clips holding it, performing this operation with the utmost care due to the fragility of the glove box body.
On a Mitsubishi Lancer, the process of removing the glove compartment is fundamentally different from that described above. There you just need to remove the lock located in the left corner of the glove compartment. That's all!
The glove compartment on a Skoda Octavia can be easily removed. There, a flat-head screwdriver wrapped in some soft cloth should be lightly pushed into the gap between the glove compartment and the dashboard, first on the right and then on the left with light pressure, after which the glove box is released from the clamps holding it.
Removing the glove box on a VW Passat is even easier. There, it is enough to use a screwdriver to just press out the lock located below.

Replacing the glove compartment handle of a Lada Granta

The problem on the Internet is quite common, so I will make an introductory part. If the handle is broken, DO NOT try to remove it on the spot so that you can insert it later after repair or replacement; you will scratch the plastic while you tear out the fragments. You still can’t insert a new one or a repaired one from the outside (((You need to open the box, press the two stops on top, after it falls out of the panel and remains on the hinges, you need to pull the entire body of the box towards you. The hinges are split, while the torpedo body is solid axles. Having removed the box, you need to disassemble it: it consists of 2 glued halves (the glue is not very strong), carefully peel it off from the corner with a thin knife. The ear (axis) in the handle-lock fell off on one side. Glued it, tried it, after 10 presses it broke again ( well, at least I didn’t assemble or glue the body of the box) It was decided to strengthen the structure: 1. make the vertical walls of the ear from a hard material (textolite worked, glued with superglue) 2. put it on 1 steel axle (drilled a 1.5 mm hole in the center and inserted a piece old knitting needle) 3. Fill the whole thing with epoxy so that it doesn’t come loose.

Replacement process

Before you start changing the old element of the air purification system in the cabin, you should prepare the necessary tools in advance:

T-shaped wrench with curved handle (torx T-20);
positive screwdriver;
new air filter suitable for Lada Granta.

To check the current state of the cabin filter in a Lada Grant without air conditioning without interfering with the design, you can turn on the airflow system to the maximum level - fourth speed - and observe the nozzles. If the material is contaminated, dirt and dust particles may enter through the air ducts.

The step-by-step process of updating the filter element of the 8 valve Lada Granta is as follows:

For ease of operation, you can first raise the windshield wipers up.
Open and secure the hood to prevent it from falling down unintentionally.
Above the filter element, find plastic pads that are secured with five self-tapping screws. Unscrew them using a Phillips screwdriver.
Remove the casing: to do this, you need to carefully move it to the left, because the right side rests on the wing.
Unscrew the two screws that secure the air filter itself.
Remove the old cleaning element by unclipping it from the side clips.
Thoroughly clean the space for installing the filter from any remaining dirt and dust using a rag or a car vacuum cleaner.
Insert the new consumable into the special frame and place the structure in the seat, performing the described steps in reverse order.

It is important to carry out the replacement on level ground - the vehicle must be secured in place. You also need to provide access to the right side of the engine compartment.

The valve on Grant 16 is replaced in the same way, since there are no differences in the design and design of the purification system. Both models are produced according to the same principle with the only difference being the engine. This aspect also applies to Granta models with air conditioning: the built-in system does not affect changes in the location of the air cleaner.

Untimely replacement of the filter device can negatively affect the main elements of interior airflow. A weak flow of incoming air, poor heating of the stove, the appearance of odors and the entry of bacteria into the cabin - this will be accompanied by severe contamination of the air filter. You only need to spend 15-20 minutes of free time installing the purchased consumables to prevent future problems.