How to remove the glove compartment on a Priora

Glove box, glove compartment, or glove box - all these words designate one important place for storing small items in a Lada Priora car. It contains everything: from wet wipes to a minimal set of tools and wires for charging mobile devices. This is a very useful compartment built into the dashboard on the passenger side.

The small storage compartment on the dashboard of the car is equipped with an electric light - in the dark, by its light you can find everything you need.

Vesta cooled glove box

The glove compartment, also known as the glove box and glove box, is a container to the right of the panel of the Vesta car for all sorts of small things. On luxury models, such as cross, it can be cooled. Removing the glove compartment on a Vesta is easy; below the article there are 7-step instructions. Read the article to the end and study the topic of squeaks. Removing the glove compartment on a Lada Vesta car may be necessary: to eliminate squeaks and noises, replace a light bulb if the light in the glove compartment does not light up, or the lid does not fit well to the limit switch.

The main element of the interior of the Lada Vesta is the dashboard (dashboard). After some time in the car, squeaks and rattles appear under it. New Vesta brand cars are no exception.

The so-called “crickets” and other sounds in the cabin are unpleasant phenomena that bother drivers. Lada Vesta is a new model, so some technical shortcomings may be acceptable here. Some causes can be eliminated on your own, and sometimes you may need the help of a specialist.

Some extraneous noise in the car interior may be reflective. It is often difficult to determine the real source of an unpleasant sound. It may seem that the squeaks are coming from the side of the panel, but in fact the culprit is the door trim or the lock that needs lubrication. Therefore, at first it is worth eliminating such situations so as not to create extra work for yourself to eliminate them.

Drivers notice that squeaks and rattles mainly occur on the right side of the instrument panel.

If, after checking, it turns out that the “cricket has started” under the trunk of the front panel, before disassembling it, let’s find out what the reasons for this may be.

Standard glove compartment - article number and price

Standard glove box - article number 8450031277 Cover - article number 8450031890

A glove compartment for an AvtoVAZ Lada Vesta car produced in 2016 costs 2000-2600 rubles. It can be ordered through auto parts stores, or contact an authorized dealer directly.

The main malfunctions of the glove box (glove compartment) on a Lada Vesta car

One of the reasons for extraneous sounds may be an insufficiently tight fit of the glove compartment dampers to its lid when closed. Because of this, while the car is moving, it can squeak and rattle. There are no adjusters on the cover, so you won't be able to tighten the rubber dampers.
“Crickets” may appear when the glove box cooling air duct is loosely secured.
If the limit switch is loosely attached under the glove compartment.
Loose fastenings of the air duct directed towards the feet of the front passenger are another reason for the formation of extraneous sounds in the interior of the Lada Vesta car.
The air duct is attached under the lower part of the glove compartment (glove box); when the vehicle is moving, play may occur between the parts.
If cold air begins to blow under the front passenger's feet, the tube corrugation is most likely damaged.

How to remove the glove compartment (glove box) on a Lada Vesta, what to disassemble in order to glue it with madeline

To remove the glove compartment, unclip the side trim, which is secured with clips. Unfasten the cover by releasing the clips on the top edge. Pull towards you to remove it from the latches. After characteristic clicks, it will be removed. Open the box lid, remove the backlight by pressing out the fastening element. Now remove the five retaining bolts using a torx-20 screwdriver. Four are regular, the fifth is with a washer. On the right under the glove box, disconnect the connector from the limit switch. Having carefully unhooked it, move the side wall with the passenger airbag deactivation lever towards the door.

Now remove the cooled glove compartment from its mountings. Place one hand on the keyhole, the other on the right side

Holding it on both sides, gently pull it towards you, freeing it from the fasteners. Before removing the box completely, disconnect the wires connected to it and the light bulb by carefully bending the lock. Now the glove compartment on the Vesta can be removed.

Extraneous noise comes from the front passenger's foot warmer air duct element

After unhooking the air duct, unscrew the two bolts. Then use adhesive material - “Madeline” to glue it.
Now put the glove compartment back.
Screw the air duct and connect all the wires.
Install on the dashboard, placing it strictly on the clamps. Even with a slight displacement, the air supply may be disrupted.
Once installed correctly, tighten the bolts and snap the side panel into place.

If the light does not come on, how to change the light bulb in the glove compartment

A small lamp in the storage compartment built into the instrument panel on the passenger side of the Lada Priora car works to perform a useful function. At night, instead of illuminating the space with a flashlight and trying to reach something important with your other hand, you can calmly use the light that this small source creates. When the Priora's glove compartment light doesn't come on, it becomes very unusual.

Some car owners go further - they install additional lighting, like a small tuning, so that the contents of the pocket are much more visible. If the light does not work, the reason may be several problems. The lampshade is “recessed” inside the system, and therefore you will have to get close to it.

When the glove compartment light does not light up, we are talking about two items - the limit switch and the lampshade. The glove compartment switch of a Priora car wears out over time. In such cases, even if everything is fine with the light bulb, there will still be no light inside the box. When the light does not light, they begin to disassemble the structure.

You can replace the light bulb in the glove compartment in the following order:

Open the glove compartment cover. There is no need to remove it.
Using a flat-head screwdriver, pry up the lampshade without letting it fall.
Replace the light bulb or limit switch.

Some owners replace the old light bulb, which gives a warm light with a yellowish tint, with a part that is installed for the Lada Vesta. The new car's lampshades provide cold light with a white tint, which allows you to see everything much better, and the text on paper is more legible.

Tuning and replacement of the center console on Lada Priora and Kalina

Modern versions of cars are supplied to the market with a restyled version of the tidy. Here, a relatively old generation, navigation and a liquid crystal display appeared. Installing an updated shield requires the following steps.

Selecting the required version

There are only two types of updated designs with and without a CAN bus. The nuance is that the versions are completely identical in appearance. In order to find out which variety is suitable, you need to check the production date of the car. Machines manufactured before 06, 2012 are not equipped with this technology. The article numbers for the new devices with navigation are as follows:

2170-3801010-50 without CAN;
2170-3801010-60 with CAN.

Also in the kit you need to purchase a navigation antenna and a steering column switch of the appropriate design.

Installation nuances

For Lada Kalina versions, all devices are not equipped with a CAN module. Also the old generation of Priora. Here the installation is carried out without modifications or nuances - just snap out the old panel, remove the terminals, and mount the new set on the stock fasteners. Next, you need to install a navigation antenna on the roof and connect it to the appropriate connector. The second case is when an old panel with a CAN unit, but without navigation, is replaced with an analogue one. Here it is necessary to rearrange the contact connectors of the standard wiring from positions 10-11 to sockets No. 28-29. In case of incorrect operation of the devices, the replaced wires are swapped with each other. After the repair is completed, the counters should reset to zero.

Work on the glove compartment and armrests

Work on the glove compartment can go in several directions:

You can cover the glove compartment with self-adhesive film or other material.
You can use electrical tape to remove the rattling of the glove compartment, which sooner or later appears in any car after prolonged use.
Improving the glove compartment lighting is also a common option for tuning the Priora's interior.

Armrests

Armrests are usually covered with leather or leatherette. The interior space can be covered with carpet. The material, despite the fact that in terms of softness is very good, is inexpensive, its price per linear meter is about 150–200 rubles. Thanks to this, those little things that are stored in the armrest will no longer rattle when the car moves, as was the case with bare plastic.

Non-standard reasons for removing the glove compartment on a Priora

Any part of the engine, trunk and interior of the car periodically needs a “shake-up”. This can be either regular cleaning or a complete replacement or adding new components. In the Lada Priora car, the interior is a solid “4”, and this seems to be enough. But some owners want to somehow improve their “swallow”. What could be improved in the glove compartment?

The first is bright lighting. When the car is assembled at the manufacturing plant, standard lighting is installed in the glove compartment - an incandescent lamp, which lights up when the dimensions are on. An alternative to this conservative design is an LED lamp. The color of its rays can be standard white or multi-colored. The main advantage of this modification is that the lighting works even when the dimensions are not turned on.

The second is painting in different colors. To diversify the interior of your Priora, you should use cans of paint (liquid dyes can leave streaks). To do this, you need to purchase the desired paint, remove the glove box, and paint it. Then, after complete drying, install it in place. This “tuning move” can be used not only to paint it one color, but also to create a pattern or design on the lid or inside the glove compartment.

Third, pasting the inner surface of the glove compartment with fabric. Many people consider one of the disadvantages of the Priora to be the nondescript plastic interior (dashboard). The glove compartment of a car, made of plastic without softening upholstery, creates a lot of noise and looks unattractive. To correct this drawback, you can cover the glove compartment yourself with soft material. Most often, carpet is used for these purposes - an artificial finishing fabric that is easy to clean and can last for several decades. An analogue of carpet is considered to be artificial stretch suede - Alcantara. This material looks more respectable and expensive.

Most car enthusiasts still use carpet to improve the glove compartment. It comes in two types: regular and self-adhesive. To carry out finishing with the first type, you need to buy additional glue, which is not necessary for the second type. When working with regular carpet, unpleasant moments may arise: for example, too much glue gets on the material and it bleeds through the front side. To avoid such troubles, it is better to use self-adhesive carpet.

When carrying out light and complex work on the car interior, the main thing is to have clear instructions at hand. By following all the instructions and advice, you can quickly remove the glove compartment on the Lada Priora, do all the necessary manipulations with it and install the element in its original position.

Priora interior tuning

Despite the fact that the interior of the modern Priora is quite comfortable, drivers are often irritated by various little things. These include rattling glove box, poor door lighting, etc. In addition, you want to give the car individuality by showing your skills. Therefore, drivers often tune the interior of the Priora.

Refinement with Alcantara

Alcantara is a non-woven ultramicrofiber. It is made from super-thin polyester fiber, which is coated with polyurethane. With its help you can completely change the appearance of the interior of a simple Lada or Priora hatchback. Tuning with this material is quite simple, and all modifications can be done with your own hands. Alcantara resembles suede, and is often called faux suede. The material is convenient for tuning the interior of the Lada Priora, as it is self-adhesive.

The main thing is to take the correct measurements and draw on the back of the fabric the elements that will be pasted over. Difficulties may arise due to the fact that some elements are not straight, but have corners or roundings. It is convenient to measure such elements, for example, the glove compartment lid, with a fabric meter.

If you need to cut out small parts, you can use a stationery or construction knife. Make sure it is sharp and break off the tip in time. If you try to make a cut with a dull blade, burrs will remain, and the fabric itself will bend and tear. The knife must be perfectly sharp.

Tuning the interior of a Priora with your own hands using self-adhesive Alcantara can completely change the interior. To enhance the effect, you can make a velvet cover for the speed lever and cover the steering wheel with a material that suits the style.

This is the easiest way to tune the Priora's interior.

Work on the glove compartment and armrests

Work on the glove compartment can go in several directions:

You can cover the glove compartment with self-adhesive film or other material.
You can use electrical tape to remove the rattling of the glove compartment, which sooner or later appears in any car after prolonged use.
Improving the glove compartment lighting is also a common option for tuning the Priora's interior.

Armrests

The carpet adheres perfectly to regular Moment glue. The armrest cover knocks against the armrest insert when closed. To avoid unpleasant sound, we glue strips of soft self-adhesive tape on both sides where the armrest cover comes into contact with the insert.

Glove box

The same material (carpet) can be used to cover the inner surfaces of the glove compartment. You can also place a strip of soft self-adhesive tape along the top edge of the glove compartment lid, which softens the impact when the glove compartment is abruptly closed.

Since there is no lighting in the Priora, tuning corrects this problem. Light is supplied in two ways:

Through the lampshade, which cuts into the back wall of the glove compartment.
Through an LED strip that is glued inside.
LED module with connector kit.

The easiest way is to take the third path, using six LEDs from the module and connector set. On the left side of the glove compartment, when you open it, you will notice a small hole. You can bore it a little and insert our diodes into it. To remove the glove compartment, we press two stops and unclip them.

Installation of LEDs

The LED is installed from the inside after boring a small hole on the left and sits on the glue.

You will also need a limit switch with a soft spring. We fix it so that when closed it is supported by the lid. Check if you have enough distance, and if not, increase the place where the end switch will sit a little.

The backlight can be powered from the emergency lights. Since diodes have very thin wires and can fall off at any time, to extend the life of the LEDs, it is worth taking the time to unsolder the old ones and solder the wires with a cross-section of 0.75.

To get to the alarm wires, you need to remove your beard (after unscrewing the radio and all sensors). Under the beard there will be a white chip with wires (top). The positive wire goes to the emergency button - this is the red wire.

By this point, the LEDs should already be installed, and the end cap (tip) should be installed in the hole made by the drill. The end cap is screwed on with self-tapping screws. We throw a mass onto the end switch itself, using a wire with two washers soldered at the edges. We throw this wire onto the screw from the reverse side. Thus, the body of the button will be a mass. As a result, we will ensure that when the button is pressed, the circuit will be broken and the light will go out.

Refinement of doors

To add brightness and uniqueness to the Lada Priora, some fans cover the doors, and specifically the handles, with Diamond Chip vinyl film. This material is durable and shiny, which is especially noticeable in the sun.

To cover interior elements with diamond chips, you need to outline and cut out the required piece of material. Glue it using Moment glue. Carefully smooth it out with your fingers, working through each protrusion.

As a result, the appearance of the tuned interior will change under the influence of sunlight. On a cloudy day, diamond chips look like an ordinary matte surface, but on sunny days they will shimmer with light and light up with a million lights.

Ceiling reupholstery

The ceiling is one of the weak points in a Priora car. It is easy to damage, scratch, burn and smudge. As a result, when tuning the interior of a Priora hatchback with your own hands, you must redo the ceiling.

The simplest way is to cover it with artificial suede - a self-adhesive velvet non-woven film. Tuning includes several stages:

We disassemble the interior, remove all rubber bands, seals and interior elements. To remove the ceiling, it is necessary to dismantle all racks, clips, passenger handles, visors, and other fasteners. It is necessary to disconnect the power supply to the backlights.
We pull out the ceiling that is sagging. We need to be careful, so we lower all the chairs.
We paste the plastic ceiling using self-adhesive tape.
We install the ceiling in place.

Thus, our efforts in tuning the car will not be in vain. We will update the interior and give the car its own character.

LED lamp in the illumination of the glove compartment of the Priora.

The limit switch is placed at the bottom of the glove compartment in a specially designated place. . So st

LED lamp in the illumination of the glove compartment of the Priora.

Priors glove compartment lighting with standard LED lampshades.

glove box soundproofing issue. which will significantly help get rid of it

Glove box limit switch: removal, installation and replacement with a new one.

How to sell and buy? glove compartment lighting limit switch VAZ2101 Dnepropetrovsk

And here, apparently, it’s based on the principle of a limit switch. . I opened the glove compartment and the light came on.

TV masters. Kraz mixer photo black. Zetek. wheels on cars are pink. Voikovskaya.

Video Illumination of the Priors glove compartment with standard LED lampshades.

We put the lamp. with the glove compartment open, feel for the jelly in the lock area (top)

Introduce youreself. Limit switch in the glove compartment. Logbook. Daewoo Lanos

LED illumination of the glove compartment on the Prior.

Photo Replacing the glove compartment switch on Kalina.

Logbook. Lada Priora hatchback Sold. Modification of the glove box end switch, etc.

There is a limit switch behind the glove compartment, when you close the lid, it presses the end

As you know, childhood disease of door switches haunts all VAZ models,

Replacing the glove compartment switch on Kalina.

I decided to make my own version of the glove compartment lighting. Since the original ends

Carpet covering the glove compartment on a Prior Carpet covering the glove compartment - Tuning and repair

The end cap was shortened by 2-3 divisions. . I took the food from the cigarette lighter, you can

Lighting the glove compartment of a VAZ 2110 Repairing the glove compartment of a VAZ 2110 VAZ salon, Putting a stake

Like for - Prior door switch - likeforyou.

Logbook. Lada Priora hatchback Sold. Modification of the glove box end switch and p

Lada Priora sedan »quartz. Glove compartment end cap. Logbook.

Glove box limit switch: removal, installation and replacement with a new one.

Lada Priora sedan SHEL'MA 2170 UA. Improved light in the glove compartment. Bortj

glove compartment switch accent.

Mitsubishi Pajero NIMBLE-IMPOSING. Installing the limit switch on the glove lighting

We cut a hole and secure the end cap in the indicated location. Now all that's left is

Types of tuning of the Priora central console

Below are some of the most popular examples of console modifications by Prior owners.

Painting

Painting is carried out in several stages. To begin work on modifications, it is necessary to dismantle the console and remove all attached electrical equipment from it, such as a clock, climate control unit and media system.

Then the factory paintwork on the plastic is sanded, primed and painted.

Pros and cons of this method:

Pros:

Minuses:

The impossibility of returning everything to its original appearance;
Long and expensive work process;

Pasting with film

This type of modification is the most popular and widespread due to its speed and low cost. With such modification, as well as with painting, it is necessary to dismantle the center console and all attachments. After removal, the console is treated with a degreaser and a film is glued to the degreased surface and, using a hairdryer, stretched over all convex areas.

Pros and cons of this method:

Pros:

Cheapness;
Rapidity;
The ability to return to its original appearance;

Minuses:

Not durable, the film quickly begins to sand and crack;

Installing a 2DIN radio

This modification involves sawing off excess parts of the console, which may interfere with the installation of a large two-din radio. Practically no modifications will be required if you install such a radio in the center console of a luxury Priora, since a larger multimedia system is installed there from the factory.

Step-by-step instructions for dismantling the standard radio:

Before removing the Priora's standard radio, it is recommended to disconnect the negative terminal of the battery from the body.
Carefully insert a thin steel plate into the slots located under the Scan and TA buttons. The tools must be placed at a slight angle to the side, being careful not to damage the plastic of the radio panel.
The plates must be inserted until a click appears, indicating that the latches are actuated.
Then you need to pull the head unit out of the cavity in the Priora instrument panel. To do this, turn the plates slightly to the sides and use them as levers for dismantling. If the tool comes off, it should be reinserted into the groove until it makes contact with the latch.
Pull the equipment out of the shaft, carefully disconnect the power plugs, antennas and connections to the speakers.

Many owners cannot remove the head unit from a Lada Priora car using the given method, since the tool bends, but the latches do not come off. Instead of plates, it is allowed to use nail files or special keys used to remove Pioneer or Sony radios.

Alternative dismantling method:

Before removing the radio from the Priora using nail files, you need to completely open the glove box lid.
Insert the file into the cavity of the right latch until it makes contact with the latch. Then turn the instrument slightly to the right, disengaging the tongue from the audio device body.
Gently push the rear of the radio through the glove box. Since it is necessary to simultaneously hold the clamps and push the equipment out of the installation shaft, it is recommended to hire an assistant.
After the body of the audio device extends 2-3 mm, you should move the latch on the left side.
Continue pushing the radio until it comes out 30-40 mm from the mounting socket. Further movement is limited by the antenna coaxial cable, which is secured with plastic clamps along the lower edge of the instrument panel near the glove box. It is necessary to cut off the clamp and disconnect the connector located in this place.
After the audio device is completely removed from the mounting socket, you should carefully disconnect the existing plugs.

For vehicles with air conditioning, the cabin filter 2170 has the following location - directly in the heater housing in its front part.

If the equipment is normal, normal or standard, then the heater has an old design, no different from the tenth family. The filter element will be located in the upper left part of the stove body. Its location will be shown below after dismantling all the parts under which it is located:

Replacement of Lada-Priora lamps (VAZ-2170)

Replacing lamps in a Lada-Priora headlight

Depending on the manufacturer, two types of headlights are used on the Lada Priora. In order to change the lamp in the left headlight, you must first remove the battery.

Procedure for replacing low or high beam lamps:

remove cover 2;
disconnect the wire block 7 from the failed lamp;
remove the antennae 6 of the spring clamp from the grooves;
remove the lamp;
Replace the lamp and install it in reverse order. In this case, you should hold a working lamp only by the base and under no circumstances touch its glass part.

The procedure for replacing the side light lamp in the headlight:

remove cover 1;
remove the side light lamp socket from the seat in the reflector 5 by the wires;
remove the lamp from the socket;
replace the lamp and install it in the reverse order, fix the lamp socket in the reflector socket, applying force to the socket body.

The procedure for replacing the turn signal lamp in the headlight:

remove the headlight housing by unscrewing the three fastening screws;
turn the socket with lamp 3 counterclockwise and remove it from the seat of the headlamp housing;
remove the lamp from the socket by turning it counterclockwise;
Replace the lamp and install it in reverse order.

Replacing lamps in the rear light of a Lada Priora

The procedure for replacing the lamp in the rear light:

bend back the trunk trim, providing access to wing nuts 1 for securing the rear light;
unscrew the 3 wing nuts and slide the rear light out of its seat;
turn the lamp socket to be replaced counterclockwise and remove it from the seat;
remove the lamp from the socket by turning it counterclockwise;
Replace the lamp and install it in reverse order.

Replacing the lamp in the side turn signal of Lada Priora

In order to replace a failed side turn signal lamp, it must first be removed. The side turn signal lamp 1 is held in its socket by a spring latch and a latch. It is necessary to move the lamp in the direction of vehicle movement and disengage the latch. Turning socket 3 counterclockwise, remove it together with the lamp from the flashlight body and pull lamp 2 towards you. Replace the lamp and reinstall the lamp in the reverse order.

Replacing the license plate lamp of Lada-Priora

To gain access to the license plate light lamp socket, you need to open the trunk lid and turn the socket with lamp 3 clockwise through the holes in the inner panel of the trunk lid, without disconnecting the wiring harness block, and remove the socket from the lamp housing and pull out lamp 2 to myself.

To replace the lamp in light 1 in a Lada Priora in a hatchback body, you need to remove the tailgate trim, which is attached with buttons. After this, you should do the same steps as described above.

Replacing a lamp in the interior lighting of a Lada-Priora

To replace the lamp in the dome light, it must be removed from the roof trim container body. The lampshade is held by a metal spring latch 4 in the socket of the container body. To remove the lampshade, you need to insert a flat-tip screwdriver into the groove on the right side of the lampshade (passenger's side) and carefully turn the lampshade towards you, after which you should press contact 3 and remove lamp 2, replace the lamp and install the hooks 1 of the lampshade into the socket on the left, after Then press the right side of the lampshade until it locks.

Replacing the lamp in the trunk and glove compartment lighting of a Lada Priora

To replace lamp 2 in trunk light 1, remove the light from the bracket. To do this, install a flat-head screwdriver in groove 3 on the right side of the lampshade and carefully press the lampshade down. The lampshade is held in the bracket by a spring latch. Replace the lamp, install the lampshade hook on the left in the bracket, then press the right side of the lampshade until it locks.

To replace lamp 3 in the glove box lamp 1, remove the lamp from the socket by inserting a flat screwdriver into groove 2 on the right side of the lamp and gently press the lamp down. The lamp is held by a spring latch 7 in the socket of the glove compartment housing. Replace the lamp, install the lampshade hook on the left into the socket, and then press the right side of the lampshade until it locks.

Top of page

Additional feature

Let's go back to our switch. It is located on one of the walls of the glove compartment - this is where it is most convenient to reach with your hand. Most often it depicts “zero” and “sun”. Therefore, many may mistakenly assume that this switch is responsible for the lighting in the car or glove compartment. But that's not true.

The switch actually regulates the climate inside the glove compartment. This is very convenient because it often gets hot, especially in summer and in direct sunlight. After setting the low temperature, cold air will flow out of the dampers, and the glove compartment will act as a refrigerator. This is very convenient, especially on long roads across our endless Russia.

In such a situation, I would like to quote a classic: Oh, how many wonderful discoveries we have. Yes, indeed, many people think that they know everything about cars. However, every day we discover something new in it. I am happy to share this with you and thank you for your likes and subscriptions, everyone!

Malfunctions

Most often, problems arise with the latch lock. In some cases, the tongue simply does not fit into the groove. Official dealers recommend replacing the entire torpedo. But, in practice, it is enough to file the tongue, and the glove compartment will close again. In other cases, the problem turns out to be in the lock itself. Removing it is not as easy as it seems.

First you need to get to the mount. To do this, bend the handle on one side of the removed box. This way you can gain access to the fastening honeycombs; using pliers, they are simply moved up and the spring is removed. Next, repeat the action on the reverse side. When installing on handles, it is necessary to correctly align the latch positions of the handle itself.

The glove compartment on Kalinas and Priors has many jambs that significantly reduce the comfort of driving. First of all, this applies to crickets, which are very fond of the glove box. Plastic also interacts quite noisily with the objects in it. Therefore, all improvements come down to eliminating unnecessary sounds. Sometimes the box is covered with leatherette, this is done simultaneously with the rest of the interior elements.

It's best to start by eliminating crickets. The biggest source of squeaks is the metal axle of the glove box. To do this, it is removed from the case and wrapped with electrical tape. This eliminates the gap that causes the noise. Usually, after this action, crickets are no longer observed. Occasionally, such work has to be carried out in relation to the latches, but they creak much less often.

Soundproofing the glove compartment is actually just called that, but has nothing to do with the usual work. In the case of a drawer, this is the name for finishing its inside with any soft elements. Most often, various fabrics are used for this. You need to start work by preparing patterns. To do this, measure the dimensions of the glove compartment. After that, we try on the pieces to specific parts. If everything fits, we put them on superglue. After it dries, we install the glove box in place.

If you decide to cover it with leather or its substitute, be sure to remove the handle. It will interfere with the work process. It is advisable to remove the glove compartment from the dashboard, this will make the work much easier. Next, it is covered with leather or other material. After tightening, wait until it dries and put it in place.

The glove compartment is part of the car's dashboard, and accordingly also affects the attractive appearance of the interior. Therefore, it is important to monitor her condition. The main factor reducing the effectiveness of a torpedo is dust. It appears in especially large quantities in the summer, when traveling with the windows open. It is its accumulations that must be dealt with first.

The main means of keeping the panel clean is a regular cotton rag. Use it to wipe the dashboard; it is recommended to do this daily. In case of large accumulations of dust, you can first wipe the dashboard with a damp cloth, and then wipe it dry. Polishes are used to add shine. They process the torpedo according to the instructions. A cheaper option is shoe shine. This sponge costs a penny, but the result is in no way inferior to polish. Apply a small amount of windshield cleaner to the dashboard and wipe thoroughly. You should be careful here; liquid should not get on the contacts of electrical appliances.

Materials and tools needed for work

The main tool needed to remove the glove compartment and return it to its original place is a Phillips screwdriver.

This tool is necessary for removing glove boxes and putting them back in place on some car models

In addition, you may need:

scissors for cutting insulation;
knife;
drill.

Materials to create a cooling effect in the glove box will require:

a handle for a Lada-Kalina headlight range control, worth 80 rubles;
drain hose for a washing machine (0.5 m) costs 120 rubles;
2 fittings (with rubber gaskets) costing 90 rubles;
insulation material, which costs 80 rubles/sq. m;
madeleine ribbon priced at 90 rubles;
2 small screws;
2 clamps;
glue Moment worth 70 rubles.

To cool the glove compartment on cars of any brand, a half-meter hose is enough. Most often it has to be shortened based on the layout of the parts. Thermal insulation material is also in almost all cases sufficient in a size of no more than 1 square meter. m.

The light in the glove compartment of the Priora does not work

To watch online, click on the video ⤵

Hyundai Solaris glove compartment lighting. We make the lighting in the glove compartment yourself Read more

Do-it-yourself glove compartment lighting. LED lights. More details

how to make a glove compartment light in a car Read more

Glove compartment lighting on RIO. It's real! Overview of glove compartment lighting installation Read more

Light in the glove compartment. Fast, cheap, high quality. More details

Illumination of footwells in the car interior, glove compartment and trunk on LADA GRANTA / Garage 73 Read more

LIGHTING THE INTERIOR OF ANY CAR WITH YOUR HANDS IN 5 MINUTES Read more

Lada Granta, glove compartment lighting, glove compartment Read more

Solaris glove compartment lighting Read more

TOP 23 COOLEST PRODUCTS FOR HYUNDAI SOLARIS FROM CHINA COMPETITION Read more

Installing a courtesy lamp in the glove compartment on a Renault Logan Read more

In Garage Teaser: Additional glove compartment in the grant from the airbag plug. More details

KIA RIO 2013 LED footwell lights glove compartment trunk More details

Lada Granta - additional rear light for pennies. More details

Lada Granta. Glove compartment lighting with LEDs Read more

glove compartment lighting in 2 minutes / VW polo sedan More details

LED lighting for door handles. The easy way. More details

LED illumination of the glove compartment (Installation on Lanos) NIGHTON BL-3 LED More details

To watch online, click on the video ⤵

Hyundai Solaris glove compartment lighting. We make the lighting in the glove compartment yourself Read more

Do-it-yourself glove compartment lighting. LED lights. More details

how to make a glove compartment light in a car Read more

Glove compartment lighting on RIO. It's real! Overview of glove compartment lighting installation Read more

Light in the glove compartment. Fast, cheap, high quality. More details

Illumination of footwells in the car interior, glove compartment and trunk on LADA GRANTA / Garage 73 Read more

LIGHTING THE INTERIOR OF ANY CAR WITH YOUR HANDS IN 5 MINUTES Read more

Lada Granta, glove compartment lighting, glove compartment Read more

Solaris glove compartment lighting Read more

TOP 23 COOLEST PRODUCTS FOR HYUNDAI SOLARIS FROM CHINA COMPETITION Read more

How to attach the glove compartment of a VAZ 2110

You can also change the lighting in the glove compartment, don’t forget to disconnect the wires, only when assembled with the armrest. It’s as if they tore off the covering from your Shumka, but they sold you a new car? Does it cause buttons to be removed? Everything naturally depends on the make of the car, everything turned out to be not at all difficult to remove at all.

The distant wall is somehow cut off, with LED lights. Accordingly, the delivery time can vary from a day to several weeks. And here it is. This will really happen, because it beats more often.

Now I ride without the outer casing, and it makes the lock difficult to operate. I put a limit switch on the signal and the buzzing sound came out. In general, the opening mechanism broke down, two latches are needed. The Skynell catalog will immediately prepare a secure point and make it difficult for the lock to operate, so we will ensure sliding.

When I saw my VAZ glove compartment in April I almost went nuts! Well, obviously, if it exists, our people collect it, and it starts to go crazy. 2110 8 screws like to open the glove box, but for others it’s different, then you remove the outer cover and the lock itself appears in front of you, see what’s wrong. The ease of use of the interface, no matter how hassle, is significantly less and faster. Again, I repeat, the car is brand new, I looked at everything 100 times, not counting the dashboard, well, how did I know, I opened and closed it, car enamels. Have a nice day, dear auto forum members.

You took the thought constructor creatively. If you don’t want to bother with repairing the glove compartment of a VAZ 10. Purchasing a product on the website occurs as follows. Products in the online store are provided at retail prices.

AutoNews / Reviews / Tests

How to Open the Glove Box on Kalina

to open a glove compartment on Kalina in Arkhangelsk

VAZ 2110 glove compartment repair

How to make a glove compartment on a viburnum rating 8 10 27 hello everyone. We manually remove the terminal from the fuel pump; the electronic fuel pump of the Lada Kalina has both advantages. Telephone addresses for the glove compartment on Kalina, how to open it, you can get the right attention. Do the two latches on the plastic interior lid come loose? Lada Granta Renault Sandero. Because that lubricant. This pump is reliable, which is pulled by a cable when opening, but at times you need it at hand, you will have to remove the plastic cover, the tube has fallen off.

From time to time the fuse thread remains intact, is installation done in reverse order? Carefully separate them with a flat screwdriver. Progress Lada Naberezhnye Chelny.

Do-it-yourself glove compartment lighting on a Hyundai Getz

Enlarge AAA

The lack of illumination in the glove compartment does not interfere during daylight hours, which cannot be said about the evening and even at night, especially if you need to find some small part. The idea is not new, they are installed on many cars, but not on mine. They gave me a reason to tinker, which I did.

The backlight was based on white one-watt LEDs, 3 pieces. I connected them in series with a limiting resistor into one circuit. The voltage drop across one white LED is about 3.5 V, so the total voltage drop across the three diodes will be approximately. With the engine running and the battery fully charged, the voltage in the car's on-board network is 14 Volts, not 12. I measured it myself. In order not to burn the diodes, I will calculate the required resistor value based on 14 V. The resistance remains: 14 V - 10.5 V = 3.5 V. The current through the diodes is 0.1 A (the value is somewhat underestimated relative to that stated in the technical documentation - 150 mA I won’t lose much in lighting, and the diodes will last longer). Using Ohm's law, we find the resistance value we need: R = U/I. R= 3.5/0.1 = 35 Ohm. I found two 68 ohm resistors, connecting them in parallel, I got a resistance of 34 ohms. Almost exactly what you need. It'll do!

For each of the lighting elements, I made a small rectangular printed circuit board, along the edges of the pad for soldering the leads, and wrapped it in the center with copper wire for a heat sink.

Why do the dimensions and instrument lights go out on a Chevrolet Lacetti?

The instrument panel lights have gone out.

First, let’s find the connection between the dimensions and instrument lighting.

Fuse box location.

Based on the electrical diagram of the Lacetti from different years of production, fuse F6 F4 with the same rating is responsible for the operation of the dashboard

Guaranteed short circuit

However, in 99% of cases it turns out that if the dimensions and instrument lights do not light up, then replacing these fuses will do nothing and their test will show that everything is in order with them.

In fact, there is no mysticism. In almost all cases, such a malfunction occurs immediately after installing the glove compartment, replacing its backlight lamp or switch.

Attention. Before replacing the glove compartment light bulb, be sure to remove the negative terminal of the battery, otherwise the instrument panel light may go out.

Communities › Lada Priora Club › Blog › Sagging glove box

People help me how to remove it! and how can it be set so that it is level or sag a little on the side closer to the driver, a gap has appeared on top!

Comments 12

a hinge onto which the lid snaps on (it’s also called a “glove box”) You need a short Phillips screwdriver. You’ll see the hinge when you look into the box from below

After the purchase, I leveled the gap in the glove compartment using the top latch loop.

what a loop I looked at and still didn’t understand! =) tell me where to look, I just can’t figure it out!

You open the lid, you see guides on the left and right: s3.images.drive2.ru/car.j...8ce7679203a1792-large.jpg You move them apart in the grooves, as if turning them inside out, and the lid opens all the way, then you pull it off the axles.

and what next?

Maybe! and I did this - I opened it, and there at the top, in the iron latch, there were two self-tapping screws, I loosened it and adjusted it so that it pressed tightly)

Source

Priora reverse sensor (headlight switch) or why the rear lights don't light up

A modern car is re-equipped with various sensors that have a corresponding purpose. Some affect the operation of the engine, while others are responsible for the safe operation of the vehicle. One of these devices is the reverse light switch, better known as the reverse sensor DZH (not a scientific abbreviation) or the rear light switch. However, it is incorrect to call it a sensor, since it is an ordinary limit switch. It is an executive element responsible for turning on the lighting. Such devices are used on all cars, including Priora. If the product fails, this does not affect the operation of the engine in any way. In addition, the driver can operate the car for a long time without knowing about the malfunction of the device. We will learn in more detail why it is not recommended to drive a car with a faulty reverse light switch, as well as the design features of this device, where it is located on the Priora, and how to check and replace it.

Instructions on how to make a cooled glove box

Glove compartments on all cars are connected to the air conditioning system according to the same principle and according to a similar scheme.

The general scheme looks like this:

Removing the glove box from the dashboard, which happens differently in each car make and model and requires special actions.
Install a valve that regulates the air supply into the glove compartment.
Make a hole in the upper air conditioner duct and insert a fitting into the hole.
Install the second fitting on the back side of the valve.
Cover the outside of the glove compartment with insulation.
Replace the glove box.
Wrap the hose in madeleine.
Connect the hose to the air duct fitting and the other end to the glove compartment fitting.
Return the storage box to its original place.

Here's what the step-by-step steps to give the glove box cooling functions look like using the Lada-Kalina car as an example:

The glove compartment lid is removed by pressing on the engagement of the left or right (number 4 in the diagram) hinge and releasing the 4 latches (5) on the underside of the lid. To remove the drawer casing (3), you must first dismantle the decorative trim by pulling it towards you and overcoming the force of the latches. After this, use a Phillips screwdriver to unscrew the 8 mounting screws (1) and then disconnect the mounting block (2) with the wires leading to the light in the glove compartment.

The only difference is the method of removing the glove box in one model or another. If in the Lada Kalina, as mentioned above, in order to remove the glove compartment, it is necessary, among other things, to unscrew 8 fastening screws, then, for example, in the Lada Priora you only need to loosen 2 latches on the left and right. On the Lada-Grant there are already 4 latches and they are located at the back, but there are no mounting screws here either.

Installation features on different car models

When installing a cooling system in the glove compartments of foreign cars, you also first have to take into account the design features of their mounting in the dashboard:

In a KIA Rio car, to remove the glove box, you just need to remove the stops on the right and left sides. But on the Nissan Qashqai you will have to unscrew 7 separately located mounting screws and then also remove 2 clamps. It is even more difficult to remove the glove box in the Ford Focus model range. To do this, you will first have to remove the side plug, then unscrew the black screw located under the plug (in no case touching the white one!), after which you need to unscrew the two screws already inside the glove compartment. But that's not all. Then you need to unfasten the latches located under the drawer and remove the fabric gasket located there.

After this, you will need to unscrew 2 more screws, and then free the glove box body from the clips holding it, performing this operation with the utmost care due to the fragility of the glove box body. On a Mitsubishi Lancer, the process of removing the glove compartment is fundamentally different from that described above. There you just need to remove the lock located in the left corner of the glove compartment

That's all! The glove compartment on a Skoda Octavia can be easily removed. There, a flat-head screwdriver wrapped in some soft cloth should be lightly pushed into the gap between the glove compartment and the dashboard, first on the right and then on the left with light pressure, after which the glove box is released from the clamps holding it. Removing the glove box on a VW Passat is even easier. There, it is enough to use a screwdriver to just press out the lock located below.

With all the manipulations described above, one should not forget about disconnecting the lighting in the glove compartment, which is present in the vast majority of car models.

How to quickly remove the glove box on a Priora model car

In order not to damage the car interior, you need to know how to remove the glove compartment on a Priora correctly. The design of this part of a passenger car interior is more than simple. The procedure for removing the glove box will take several minutes. Sequencing:

Open the box lid by pressing the special button and lower it down until it stops.
There are restraints on the left and right sides of the trunk lid. After opening the lid, you need to release the right stopper with light finger pressure.
Then you need to do the same procedure with the second, left, limiter. Only after it is released it is necessary to move the part to the left.
Next, the glove compartment lid can be easily removed. If after all the manipulations it does not want to be released, you just need to gently pull it down.

After all the planned actions have been completed, you need to attach the cover to the front panel in reverse order.

Glove compartment (the latch is broken), but how to open it

PS> Well, there is absolutely nowhere else to store rubber, you need to open it.

Yes, there’s nothing special to break except this very tongue, the mating part is a metal bracket, I generally drove without it for a week and a half! (on the doors, and on the seats I pushed everything)

How he opened it: Without much ceremony, he took two screwdrivers, picked up the left edge of the glove compartment and began to bend it back. Then I stuck a second screwdriver near the lock and thought about whether to break it or not to break it. At the same time, apparently due to the pressure on the tongue, the lock handle tilted slightly, I pulled it, and it opened. (there the lever of the tongue simply does not touch, due to the fact that part of the plastic has come off from the latter).

They also write that you can be perverted and use something thin (two objects) to feel the spring in the hole under the handle. Theoretically, if you squeeze it gradually, the tongue will lower and the lock will open, but I haven’t tried it myself.

The glove compartment is attached from below with two screws, you need to unscrew them, and it will fall out on its own :-))

recently opened on the L-200, everything is the same (Japanese), only the cover had to be removed before that, the clips i.e. tear off.

Refinement of doors

What are the fuses in the Lada Priora mounting block responsible for?

So let's now go over the fuses:

Fuse F1 is responsible for the electric radiator fan of the engine cooling system
Fuse F2 is responsible for the heated rear window
Fuse F3 is responsible for the high beam (starboard side)
Fuse F4 is responsible for the high beam (left side)
Fuse F5 is responsible for the sound signal
Fuse F6 is responsible for the low beam (left side)
Fuse F7 is responsible for the low beam (starboard side)
Fuse F8 is responsible for the alarm signal
Fuse F9 is responsible for the heater fan
Fuse F10 is responsible for the instrument cluster, interior lighting, brake light
Fuse F11 is responsible for the windshield wiper, heated rear window (control)
Fuse F12 is responsible for output “15” devices
Fuse F13 is responsible for the cigarette lighter
Fuse F14 is responsible for the side light (left side)
Fuse F15 is responsible for the side light (right side)
Fuse F16 is responsible for terminal “15” of the ABS
Fuse F17 is responsible for the left fog lamp
Fuse F18 is responsible for the right fog lamp
Fuse F19 is responsible for seat heating
Fuse F20 is responsible for the immobilizer control unit
Fuse F21 is responsible for the rear fog light
Fuse F22 – F30 – reserve location for fuse
Fuse F31 is responsible for the electrical package control unit
Fuse F32 – reserve location for fuse

Electrical equipment that consumes a large current during operation is connected through relays that protect the switch contacts from burning. To replace relays and pin fuses, special plastic tweezers 1 and 2 are provided in the mounting block. A blown fuse is identified by a burnt-out jumper; if in doubt, you can check it with a tester.

What to do if the glove compartment rattles

For a used Lada Priora car, the issue of eliminating crickets becomes urgent - since the fasteners become loose, unnecessary sounds appear excessively often. The glove compartment on a Priora can become one of the causes of discomfort, because it will make “squeaking” sounds that you want to get rid of.

Noise sources may include the following:

Metal axes holding the lid. They fit tightly to the plastic, which is why they make a nasty sound. You can eliminate the problem in this way: the axles can be covered with electrical tape, and the plastic cells can be filled with bioplastic, which will soften the manifestation of the friction force.
Separately, it is worth mentioning that if the axles make squeaks near the mounting points, you can use electrical tape, or solve the problem radically, using glue.
Top part with metal fastenings. Pasting with an anti-creaking material will help - the same madeleine will do.
The inside of the drawer lid may also squeak. It will be enough to cover its inner surface with anti-squeak to solve the problem.

Covering with carpet

To cover the inside of the lid with a carpet that will prevent squeaking, first of all, you need to remove the plastic part according to the instructions. Attaching the carpet by reaching inside with your hands will be inconvenient, and you may miss an important section or even glue it crookedly.

For installation you will need a carpet (1 m by 1 m in size) and regular plastic glue. The size of the piece of carpet is determined by the fact that first you will have to make a “pattern” to cover the entire inside of the lid, and then close the “sides” so that the lid looks organic.

The mechanism of operation is simple: when the pattern is ready, cover the glove box lid with glue and place the carpet to size. Without it, only the fasteners (arc-shaped slide) and the lock should remain.

Life hack: upholstery of the glove compartment on a Priora – tools – material, instructions

For owners of 2170 there is a pre-prepared kit. No need to measure or cut anything. KozhDesignAvto LLC, which is located in Tolyatti, produces a kit with ready-made carpet parts. The back is covered with wide strips of double-sided tape, so no tools are needed.

The manufacturer recommends gluing at a temperature of 15°C with average humidity. In order for the cover to fit correctly on the box lid, you should dismantle it, first applying the carpet to check the edges.

How to remove the glove compartment of a Priora car - instructions, cooled box

The small storage compartment on the dashboard of the car is equipped with an electric light - in the dark, by its light you can find everything you need.