Lada Vesta Cross SV wheels - drilling, offset, central hole diameter and characteristics

Wheels for any car are like shoes for a person. Not literally, but figuratively, of course. Properly selected good shoes make its owner more stylish and fashionable, just like rims can radically change the appearance of a car.

In the case of the new product of the domestic automobile industry - LADA Vesta Cross SW, everything is exactly the same. Lada Vesta SV Cross wheels give the all-terrain station wagon a finished look. By the way, in the photo below is the Lada Vesta Cross SV in Carthage color

Of course, wheel design is a matter of taste. Some people like him, some don't. In the case of standard solutions, everything is somewhat different. Yes, someone will say that the wheels of the Lada Vesta SV Cross are very simple and do not stand out, and they will be right. This is true. But don’t forget that a whole team works to create a car. All design decisions are calculated more than once. And the choice of just such drives for Vesta is the decision of a whole team of marketers and designers. The thing is that this position is conditioned by neutrality. Wheels should fit into the design of the car, but should not be flashy or conspicuous. They should also not affect the factory clearance of Vesta. But don’t forget that the wheels and tires of the Lada Vesta SV Cross are replaceable parts and can always be replaced with others.

Basic characteristics of wheels on Lada Vesta

Lada Vesta is a domestically produced sedan, which has been produced by the VAZ plant since 2015. A special feature is the Lada Vesta wheel size with parameters R16-R17, in contrast to earlier models, which are characterized by the use of standard sizes R13-R14.

Initially, this model was released on the market with wheels size 185/65/r15. Gradually, the manufacturer decided to switch to wheels on the Lada Vesta of an increased size, reaching 16 - 17 inches. The decision to install wheels of a different size made it possible to significantly increase Vesta’s handling and stability on the road.

Appearance of Lada Vesta Cross: choice of roller

In stamped rollers, the appearance depends on which stamp was chosen for their manufacture, while in cast rollers, milling and computer graphics are used. Often, owners find other ways to make the car original, for example, installing r16 wheels instead of 15 on the Lada Vesta SV Cross. This leads to the following:

  • The steering becomes better, the car holds better on the road, but when driving on uneven roads, the ride comfort decreases;
  • The traction indicator in dry weather increases, but fuel consumption increases, tires wear out faster, noise insulation and stability during aquaplaning decrease.

Features of standard tires

Ladas delivered from the assembly line are equipped with Belarusian tires from the Belshina plant, which are designed specifically for this car and are of fairly high quality. The type of tires on the Lada Vesta belongs to the ART Motion brand. This fact suggests that during the production process the rubber undergoes a series of tests in accordance with Spanish standards.

The tires have shown excellent parameters in practice, guaranteeing a number of advantages:

  • High controllability, including on water-filled asphalt. This is facilitated by special arc-shaped grooves located on the inside of each tire. These grooves play the role of a kind of drainage system through which water is removed from under the wheel.
  • The outer part of the tire has enlarged relief blocks, which increase the vehicle's stability on sharp turns.
  • The protector is selected in such a way that the noise level is as low as possible.
  • Three longitudinal grooves are responsible for the directional stability of the machine;
  • Low rolling resistance reduces fuel consumption and improves speed characteristics.
  • Increased grip properties provide short braking distances and eliminate slipping.
  • An important role is played by the low cost of this rubber with relatively high quality.

Lada Vesta in the “luxury” configuration is equipped with tires from the German manufacturer Continental in size 195/55/R16, which are among the best on the world market. The most suitable size of tires and wheels for Lada Vesta is 16 inches.

The factory set of wheels includes 16 or 17-inch alloy wheels from K&K. This company occupies a leading position in the Russian market today.

Selecting disks for Vesta

No matter how good the wheels on the Lada Vesta are, sooner or later they have to be changed. The harsh conditions of our roads negatively affect the life of any wheels. Also, some car owners want to replace the standard wheels of a new car with alternative ones with a different design.

In such cases, the following types of wheels and tires for tire fitting can be recommended for Vesta:

  • exclusively 16 or 17-inch tires;
  • alloy wheels 175/70/R16 or 205/60/R16;
  • alloy wheels 175/55/R17 or 195/50/R

What wheels are suitable for Vesta? The following wheel rim models can be considered the most suitable:

The latest model is different in size, which changes the stability of the car for the better.

If winter tires are required for the Lada Vesta, then it is better to choose narrower ones, as they have higher stability at low temperatures and slippery roads typical of winter conditions.

When buying rims for Lada Vesta, you should pay attention that the Lada Vesta bolt pattern is somewhat different from that previously used. Wheel compatibility depends on which bolt pattern is used. These wheels are designed to be mounted with four bolts, and their sizes correspond to the sizes of bolts for Korean cars, which significantly expands the range of wheels for this car. The diameter of the mounting holes is 100 mm.

If there is a need to install wheels made of light alloys, then we can recommend the products of the company PDW, which specializes in the production of forged and cast wheels for domestic brands of cars. Therefore, the parameters of PDW disks correspond to the maximum possible extent to the standards adopted by VAZ.

It should be remembered that installing wheels of an inappropriately large diameter significantly reduces ride comfort, especially when driving on potholes and other uneven surfaces. Increasing the width increases almost all qualities of the wheel, except stability on wet roads.

Decoding Lada Vesta tire sizes

The tire sizes given in the tables are encrypted in the form of numbers and letters, which do not mean anything to the uninitiated person. In order to understand what parameters a tire has, you need to be able to read their markings correctly.

For example, let's take the standard size for Lada Vesta Cross 205/50 R17 89V. You can decrypt it this way:

  • The first number indicates the width of the tire in millimeters. In our case it is 205 mm.
  • The second number, which is written separated by a slash, indicates the ratio of the tire width to its height as a percentage. If this value is 50, then the tire width will be 102.5 mm.
  • The letter R does not denote the radius, as most drivers believe, but the radial type of tire. Most modern products use this type of internal structure.
  • After the letter R, the manufacturer indicates the rim diameter (also known as the inner diameter of the tire, measured in inches). In our example it is 17 inches.
  • The next number indicates the maximum load on the wheel. The index, which in our case is 89, means that the maximum load should not exceed 580 kg. Data on this can be seen in the table below:
MeaningLoad, kgMeaningLoad, kgMeaningLoad, kgMeaningLoad, kgMeaning Load, kg
6226575387885601018251141180
6327276400895801028501151215
6428077412906001038751161250
6529078425916151049001171285
6630079437926301059251181320
6730780450936501069501191360
6831581462946701079751201400
69325824759569010810001211450
70335834789671010910301221500
71345845009773011010601231550
72355855159875011110901241600
73365865309977511211201251650
743758754510080011311501261700

After the load index comes the speed indicator. You can also determine it using the table.

Permissible speed (km/h)Speed ​​value
120L
130M
140N
150R
160Q
170R
180S
190T
200U
210N
240V
270W
300Y
Exceeds 300Z

In addition to this basic information, additional information is also indicated on the tires. For the average motorist, an important indicator will be the company and country of manufacture, as well as the seasonality of the tires. Tires intended for winter have a snowflake pictogram and the designation W or M+S (M&S, Mud + Snow). Summer tires are sometimes designated with a “sun” pattern, but do not have a letter designation.

Wheels for cars

Lada Vesta Cross SW debuted in the manufacturer’s lineup relatively recently. Excellent design and execution immediately made the car quite popular. And adding ease of maintenance and operation, you get an excellent family car.


Original alloy wheels "Vesta Cross"

The great popularity and prevalence of the car became possible with the advent of many different accessories, parts and spare parts for it. This list also includes tires and wheels. Inexpensive configurations have steel wheels produced by stamping. This is the most inexpensive solution.

Expensive and richly equipped versions are equipped with large rims, various shapes and colors. If desired, you can personalize the car by installing wheels of a special design from a variety of represented manufacturers. This happens when the season changes or the original simply wears out.

There are a large number of wheel rims on the market, which in terms of parameters and dimensions are suitable for installation on a car. These can be very well-known and high-quality products from well-known brands or less expensive, simpler ones. There are replica models that people prefer to buy to save money.

Careful adherence to the manufacturer's recommended dimensions when selecting wheels is required. Car owners who prefer products with a large radius should be especially careful, since exceeding them can be fraught with breakdowns and increased wear of the car.

If, for various reasons, the car owner is faced with the question of replacing wheels, then for Vesta Cross it is necessary to comply with all parameters in terms of width and diameter, offset and bolt pattern parameters. Products with the characteristics listed below will fully meet all requirements:

  • Cast wheels with dimensions 175/70/R16 or 205/60/R16.
  • Large products with dimensions 175/55/R17 and 195/50/R18.
  • If the Vesta is SV Cross, then R18 wheels should be installed.
  • signed an agreement with the wheel manufacturer K&K. The products of this manufacturer are presented specifically for Vesta and have all the same dimensions and parameters.

Experienced drivers recommend installing tires and wheels that have a minimum width and radius for the winter. This is due to the fact that such products have increased stability and less rutting in difficult weather conditions, be it ice or snow.

The AvtoVAZ concern has created a special drilling parameter for models of the Vesta family. He became similar to representatives of South Korean car manufacturers. This has expanded the choice of discs from those on the market.

As for tuning and installing very large wheels on a car, you should prepare for the fact that the manufacturer will void the warranty for such car enthusiasts. In addition, you will have to greatly sacrifice comfort for the sake of appearance and increased handling.

Should AVTOVAZ be blamed?

First of all, the wording “it turned out” in the reader’s question is unclear. The dimensions of tires and wheels allowed by the manufacturer are indicated in the operating instructions, which are posted on the official website in the public domain.

If spending on consumables for a car is so important for the future owner, it is advisable to conduct a price analysis before purchasing the car

It is worth admitting that with the price of the original 17-inch wheel (about 7,500 rubles), AVTOVAZ was really greedy. After scouring a dozen of the largest wheel sales sites, I really only found one perfect option - the KiK Flanker. It is cheaper by a thousand rubles, which saves 4,000 rubles per set. Which, in my opinion, is not so little.

After all, there is no obligation to necessarily start a complete winter kit. Are the wheels too expensive? Buy only tires. For the money that a Lada dealer asks for one disc, you can change the shoes of the entire car three or four times.

And to be completely honest, AVTOVAZ is by no means alone in the desire to make a little money. If you look for it, a similar “scam” for extra money can be found in almost any car! And the case with Vesta Cross is not the worst: for an attentive buyer it is obvious even before purchase.

Without going too far from the topic of the chassis, two examples come to mind off the top of my head. For a long time, French cars used light alloy wheels without a center hole. It is impossible to balance them on a standard tire machine. I had to look for a workshop with rare equipment. To someone in the regions - I'm sure! — there was only one way, to the official dealer with its queues and draconian prices. And for Citroen’s proprietary Hydractive suspension, non-original struts were not produced. And this despite the fact that on the last generation C5, their “snotty” and knocking could not be corrected for years, and the owners of the cars changed several sets in a row.

Finally, a little tip: write complaints and suggestions if you are not satisfied with something. Just not to the magazine “Behind the Wheel”, but directly to the manufacturer. In recent years, AVTOVAZ has demonstrated more than once that it listens to customers. Perhaps, when the number of requests reaches a critical volume, 16-inch tires and wheels will be certified for Vesta in the Cross version.

The list of the main characteristics of the car also includes the tire size, since this parameter is not only an element of the exterior, but also a factor influencing the handling, dynamics and cross-country ability of the car. Let's consider the size of the wheels of the Lada Vesta sedan, which is increasingly found on the roads.

How to choose cast products

The car is equipped with such wheels from the factory, or you can purchase them yourself. The widespread use of casting is associated with the relative low cost of production and the ability to create products of any shape and design.


Factory alloy wheels for Lada Vesta Cross SW

Alloy wheels purchased independently must meet all recommended parameters and characteristics. The maximum permissible radius, which is R17, should not be exceeded.

In terms of prevalence, die-cast products represent 70 percent of the total market. They have less weight than stamped steel and improved characteristics. By purchasing cast wheels, you can improve the factory settings of the car, get better dynamics, handling and smoothness.

Dimensions and specifications

The most economical solution is to purchase stamped wheels for the Lada Vesta SV Cross. They have a less attractive appearance and small R15 sizes. However, this will be the most economical offer in stores. They have increased strength and shock resistance. In addition, 15-inch wheels will give the car the most comfortable and smooth ride. In this case, tires should be chosen in size 175/70 R15.

As for cast products, this is a more expressive purchase from a design point of view. Made from cast aluminum and magnesium alloy, these wheels will provide maximum performance to your vehicle.

In this case, the following requirements must be followed:

  • If the wheel size is 205/60 R15 or 175/70 R15, then this is the best choice for the winter.
  • If the tire sizes are 185/60 R16, then handling will increase, and the level of comfort will not decrease noticeably.
  • As for the radius of the R17, the level of comfort will decrease slightly, but handling and road stability will noticeably increase.

General background information

Ranges of possible values ​​for tires and wheels Lada Vesta SV Cross 2022.
Tires

Diameter15″–18″
Width (mm)195–215
Profile (%)40–65
The smallest size195/65 R15
The biggest size215/40 R18

Wheel disks

Diameter15″–18″
Width (inches)6.5–7
Reach (mm)40–45
Drills4×100
Photo
Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

  • On what roads will the car be primarily used?
  • Do you need increased cross-country ability?
  • How much of the route will be city roads and how much will be highways?
  • Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for Lada Vesta SV Cross 2022?

3 types of rims:

  • Stamped (economical price category) - made from a sheet of iron by stamping on a press.
  • Light alloy - manufactured by casting (more reliable than stamped ones).
  • Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

  • deterioration of management;
  • uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

  • increased fuel consumption;
  • rapid wear of the outer tread segments;
  • the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

Options

The manufacturer recommends installing tires on Vesta, which has the following parameters:

  • 175/70 R15;
  • 205/60 R15;
  • 185/60 R16;
  • 175/55 R17;
  • 195/50 R17.


Wheel parameters for Vesta Cross

As for the original rims, they are made in only one size - R17. They also have certain parameters and sizes that are important to know when choosing. This applies to all cast products. For all original discs, regardless of their production method and complexity, the manufacturer provides the following parameters:

  • radius R17, measured in inches;
  • drilling or bolting - 4×100;
  • DIA (diameter of the central hole) - 60.1 millimeters;
  • bolts - 12*1.5;
  • permissible disk width - 6.5J x 17;
  • departure ET41.

Parameters of standard bolts

A distinctive feature of this car is the use of bolts rather than studs with wheel fixing nuts. Sometimes it happens that standard fasteners need to be replaced for some reason. In this case, before purchasing, you need to familiarize yourself with the characteristics of the bolts. Otherwise, serious trouble may arise.

For example, bolts with an inappropriate taper can cause spontaneous unscrewing. As a result, the disk can become disconnected while driving. Which threatens a serious accident. As a result, it is advisable to avoid such situations. Choose the right bolts and tighten them well. Standard parameters of standard elements:

  • cone inclination angle, degrees – 60;
  • edge width, mm – 17;
  • thread length, mm – 28 mm;
  • thread pitch, mm – 1.1 mm;
  • total length, mm – 56 mm.

The cost of 1 bolt can range from 150 to 250 rubles - this applies to original ones. There is also a wide selection of different analogues on sale. Before purchasing such products, it is advisable to familiarize yourself with all their characteristics. It is also advisable to study reviews. Only then purchase.

Some drivers opt for sets with secret locks. These are found on sale quite often. When using new bolts, it is advisable to lubricate the threads with a special graphite lubricant. This will avoid souring and prevent various problems and difficulties.

It is also important to carefully monitor the secret key

What wheels are suitable for the car?

The best choice, in which you don’t have to worry about safety and quality, is to purchase original wheels. It is possible to purchase and install individual products from other manufacturers, but you must ensure that the parameters and dimensions match.

"Lada Vesta SV Cross" is the most expensive and prestigious version. Common drilling parameters allow you to select discs from a wide range.

High-quality summer and winter tires are important for any car. Even if you have a Russian Lada Vesta car, its wheels should be reliable and strong, and its tires should have good treads. Often car enthusiasts are not interested in what tires were installed on the car from the factory. They put the cheapest option. The position is incorrect, because the driving safety, driving properties of the car, and its stability depend on the parameters of the wheels and their quality.

The manufacturer of the Lada Vesta specifies specific characteristics for wheels, and people rely on them to select the right model. It should be noted that Vesta, which has been produced since 2015, uses wheels with R16-R17, previously the plant practiced installing smaller sizes. The wheels had dimensions 185/65/r15. Now the size of the disks has increased, Vesta’s stability in motion has increased. After reading the article you will understand which wheels should be on the Lada Vesta.

How to choose the right winter tires for Lada Vesta SW Cross

On a note!

Not every tire will have ideal grip properties on slippery surfaces in the winter. If the car enthusiast follows the recommendations below, then he will not have any problems when operating the vehicle:

  • If the driver drives his Lada exclusively in the city, then the all-season M + S version with hard treads that will not wear out quickly during sharp braking or when turning on asphalt surfaces will suit him.
  • When the vehicle is operated on country roads, or in the region where the driver lives, the air temperature often drops below -10 degrees Celsius, then it is simply impossible to do without full-fledged winter tires. And it’s even better if it is equipped with multi-directional metal spikes, which will ensure the stability of the car during acceleration, braking and cornering.
  • If the car is planned to be used on rough terrain with completely snowy roads, then a studded tire will be unnecessary, because the studs play virtually no role in traction, and the main function is taken over by the soft tread. Thus, a car enthusiast should purchase a friction tire, the surface of which is cut into numerous lamellas with sharp edges.


Friction tires on Lada Vesta SW Cross These elements, when pressed on them under the weight of the car, move apart, forming dozens of cracks, into each of which snow mass falls, lingering there for a certain time.
When the wheel rotates, the traction surface increases significantly, which provides additional frictional force that pushes the car forward without slipping.

If excess moisture forms under the wheels (for example, at zero temperature outside the window, when the snow turns into mush), then it is effectively removed through special grooves for collecting water between the blocks of lamellas.

When choosing wheels, a car enthusiast can turn not only to companies that are authorized brands of the concern, but also to other brands whose products are adapted for normal use in the middle zone. This means that the chemical composition of the rubber must be selected in such a way that the protectors do not harden even at extremely low temperatures.

You may be interested in Kumho - tire manufacturer

It is advisable to select tires that contain admixtures of silicate materials and create an abrasive surface during wear. The most popular brands for Russian car enthusiasts are Nokian, Bridgestone, Pirelli, Michelin, Amtel, Viatti and some other companies that are widespread in the Russian Federation.

Important!

Before choosing a particular tire brand, a car enthusiast needs to verify their authenticity by checking the technical specifications on the tire manufacturer’s website with the data at the retail outlet.


Studded tires for Lada Vesta SW Cross

Alloy wheels and their parameters - everything you need to know

When purchasing 15, 16 or 17 inch wheels for your car, don’t expect them to last forever - they won’t. In time, the question of replacement will arise. Russian roads force even expensive wheels to break quickly. Some drivers are not satisfied with the parameters of the wheels or tires, so they change them.

If the time for replacement has come, many parameters must be taken into account. These are wheel size, rim type, rim offset (ET), wheel bolt pattern, diameter and other parameters. Products with the following technical data are suitable:

  • casting with wheel size 175/70/R16 or 205/60/R16;
  • alloy wheels 175/55/R17 and 195/50/R;
  • for the Lada Vesta SV Cross station wagon, 18-inch wheels are needed;
  • tires are used exclusively on 16 and 17 inches.

AvtoVAZ uses a number of wheels produced by K&K. If you take them, drilling, bolt patterns and other parameters will converge. A good option would be to install r16 and 17 Phoenix wheels.

The plant recommends choosing narrow winter tires for the Lada Vesta. This is necessary to increase stability when driving on slippery roads in sub-zero conditions.

Before purchasing wheels, pay attention to the bolt pattern. On the Lada Vesta it has changed somewhat; not all wheels will be compatible with it. The rims are secured with 4 bolts, the diameter of the mounting holes is 100 mm. The wheels of Korean cars have similar characteristics.

We do not recommend installing wheels with a significantly larger diameter. This will make driving less comfortable. It will be less resistant to driving on uneven roads.

What does the size of tires and wheels affect?

If you're thinking about what wheels to buy for your car, check out the recommended tire and rim sizes. Choose wheels with a narrower profile. This will create more pressure on the road surface, which will increase traction. But you need to remember that wide tire sizes are less resistant to getting into a rut.

If you choose low-profile tires for the Lada Vesta, they will make the ride uncomfortable. Every bump and pothole will be felt on the body.

When choosing tires and wheels, pay attention to their weight. The less weight, the faster the car accelerates.

Alternative wheel sizes for Vesta

Many car enthusiasts are not interested in standard wheels, so they look for alternative brands. But you need to understand what kind of wheels can be installed on a car, and whether the car will gain several advantages from this. Installing wheels with other sizes is a popular phenomenon. Some are sure that this is how they tune the car, others are trying to optimize its performance. Let's consider the main positive and negative aspects of such a decision.

The easiest way to change the characteristics of wheels is to replace the tires with new ones from a different manufacturer. But you need to choose tires with a similar tread pattern, similar properties and the same degree of wear. A common change in the characteristics of the entire wheel is to increase the width of the rim. This changes the appearance of the car and its properties. The car's maneuverability, stability, and dynamics become different. Sometimes the changes are negative.

When looking at the wheels, remember that when increasing the diameter, it is better to reduce the height of the tire. Otherwise, when turning, the tire may touch something from the wheel arch, which is not designed for these changes. The following tires are acceptable for Vesta, depending on the diameter: - 175/70 R15; — 205/60 R15; — 185/60 R16; — 175/55 R17; — 195/50 R17.

    The positive aspects of installing larger wheels and low-profile tires are as follows:
  • improving the appearance of the car;
  • increasing stability, dynamics, control sensitivity;
  • effective pothole suppression;
  • reduction of braking distance;
  • increasing suspension service life;
  • increasing the efficiency of ABS and ESP.
  • In addition to the positive aspects, there are disadvantages:

  • the ride becomes uncomfortable;
  • It is not recommended to drive on bad roads;
  • it is necessary to carefully monitor tire pressure;
  • due to higher kinetic energy at the start, more fuel is consumed;
  • This kit is more expensive.

What consequences await the owner if you install 18-inch wheels?

Theoretically, it is possible to install 18-inch wheels on the Lada Vesta Cross. But these changes will not allow the motorist to feel normal on the road.

The width of the tires is very different from the dimensions declared by the manufacturer, so if there are bumps and holes on the roads, the wheels will quickly fail. However, installing such disks has its advantages:

  • Exterior design becomes more strict and expensive;
  • Improved road stability and steering;
  • When hitting bumps, the wheels dampen vibration;
  • More gentle conditions for car suspension;
  • The braking distance decreases;


Disadvantages when installing large wheels:

  • You cannot drive in areas with bad roads;
  • It is necessary to constantly monitor tire pressure;
  • Increased fuel consumption, as energy consumption increases when starting the car;
  • 18 inch wheels are more expensive;
  • The dimensions do not correspond to the operating rules, so small irregularities cause damage to the wheel.

Factory stamped wheels for Lada Vesta

It is easier and cheaper to install stamped wheels on a car. They are made from steel by stamping using a mold. Stamps are more impact-resistant and wear-resistant; they are often installed for the winter. Specific wheels are suitable for different cars. They differ in the holes for the hub, are fastened with different bolts, have different disc offsets, etc. It is better to buy discs in stores or look carefully at photos of stamped discs with a diameter of 15 or larger.

Stamped discs are the most durable. They tolerate scratches, abrasions and impacts well. They are cheap and repairable.

The rim size r15 is usually installed on basic cars. They come with tires with characteristics of 175/70 R15. When purchasing wheels, pay attention to the radius of the stamped wheels and the configuration. Sometimes you have to purchase mounting bolts yourself, incurring additional costs and stress.

About standard disks

Two types can be installed on Vesta: stamped and cast. Standard size recommended by the manufacturer: R15 and R16. Each type has its own characteristics, pros and cons.

Stamped

Stamped R15s are provided as a factory option as standard. The tire size is 175/70 R15. Choose stampings both from an official dealer and in many specialized stores.

Vesta alloy wheels

They are made from special alloys based on aluminum plus additives for rigidity and strength (strontium, titanium, magnesium). The manufacturing process for alloy wheels involves high pressure to produce a durable design. The final shape is achieved on a high-tech milling machine. The higher cost of alloy wheels is due to the complexity of production. Casting is lightweight, but the products are less resistant to mechanical damage.

Depending on the configuration, the Lada Vesta can be equipped with two cast and stamped wheels of different sizes:

  • in the basic configuration R15 with tires of 175/70 and 205/60;
  • in more expensive versions of the R16, stamped or cast (Luxury and Cross equipment) with 185/60 tires.

Casting can be ordered as a separate option for any configuration or purchased in specialized stores. If for stamped ones you need to pay no more than 2,500 rubles (on average 1,500), then the cost of alloy wheels starts from 3,000 (R15) and 4,000 rubles. (R16) for one copy. Depending on the manufacturer, the cost can increase several times.

Factory alloy wheels

At the factory, alloy wheels are installed on luxury trim levels. If you have seen a Lada Vesta in the photo with 15 alloy wheels, it means that the driver of the car installed them himself, or it is a luxury one. Typically, the manufacturer installs products from the Russian company K&K. It is a leading manufacturer of die-cast wheels. He has been making rims for over 20 years since '91. Kik has reliable equipment. The company provides a substantial warranty on the wheels. The Lada Vesta in the photo on 16-inch alloy wheels looks beautiful and stylish. It is not equipped with alloy wheels, you can pay extra for them.

Lada Vesta is equipped with high-quality factory wheels. They have practical performance characteristics and most buyers do not change them for many years. But some people see the Lada Vesta in the photo on 17-inch alloy wheels and want to install these for themselves. Be aware that then you will have to install low-profile tires, the ride will become less comfortable. But the solution has advantages, discussed earlier.

Removing and installing the hub: front and rear

This part is always hidden behind the wheel, so first, lift the rear or front of the car and remove the wheel. To do this, unscrew the bolts with little effort, moving from one to another in order, so that dismantling occurs as quickly as possible. Before doing this, the car needs to be stopped in place; it is better to do this using wheel chocks.

To replace the hub on the front wheel of a Lada Vesta:

  1. Lower the brake fluid level in the reservoir.
  2. Press down the brake cylinder piston carefully so as not to damage the protective casing. Separate the pads.
  3. Using a 18 mm socket, unscrew the bolts securing the disc to the steering knuckle, hang the disc brake on the suspension spring. Do not remove it far, place it away from the sharp ends of parts so that the brake hose is not damaged.
  4. Unscrew the casing mounting bolts and remove the casing.
  5. Closer to the center of the car, the wheel speed sensor wire is connected to the top - disconnect it. Before doing this, unscrew the bolt next to it. Take out the wiring harness.
  6. Unscrew the ball pin fastening nut and disconnect the steering rod from the steering knuckle.
  7. Unscrew the remaining steering knuckle nuts and remove the bolts. First, remove the front wheel drive shaft, and then remove the steering knuckle assembly.
  8. Replace the part, reassemble everything in reverse order.

To work with the rear wheel of a Lada Vesta, the process looks like this:

  1. Unscrew the hub fastening nut, and then remove the drum along with the bearing, retaining ring, and magnetic ring from the axle.
  2. To remove the bearing, press the magnetic ring with a three-arm puller.
  3. Place the drum on the press table, place the mandrel 78.7853-9728-1 on the bearing.
  4. Press the bearing out of the drum.

To install the bearing, thoroughly clean all parts from dust and dirt for excellent adhesion, and carry out the work in the reverse order.

Tires and their parameters

Before choosing tires, the driver must understand that the size of car tires very seriously affects various characteristics of the car. Perhaps the grip will improve, the car will stay on the road perfectly at speeds of up to 210 km per hour, others increase the load capacity and speed index. Of course, the manufacturer indicates factory values ​​that are considered optimal for a particular model. On the Internet you can find a list of proven winter tires and similar summer tires for each brand. But how to choose tires? The following parameters need to be taken into account:

  • factory recommended tire size is 185/65 R15 and 195/55 R16;
  • if the wheels are 15 inches, the tire size is 175/70 R15 and 205/60 R15;
  • for 17-inch wheels choose tires 175/55 R17 and 195/50 R17.

The manufacturer puts optimal tires on its Lada Vesta cars. These are Belarusian Belshina tires. They are designed specifically for AvtoVAZ and have high reliability and good quality. If you are puzzled by the choice of winter or summer tires, you can install the products of the Belarusian plant. Tires for Lada Vesta belong to the ART Motion brand, which is of Spanish origin. This means that the quality of the wheels has been tested according to the standards of the country of origin - Spain.

This is confirmed in practice. Wheels have the following advantages:

What tires does AvtoVAZ recommend installing according to operating rules?

Each car manufacturer will force owners to use only those sizes that are specified in the operating rules. Based on these dimensions, the car can be considered safe on the road.

Using these characteristics, the machine underwent certification and safety tests. The manufacturer is not responsible for changing wheels.

ModificationTire sizes based on load capacity and speedTechnical data of the wheels used
carDia,mmPCD,mmNumber of fastenersRim width, inchesRim offset (ET), mmAir pressure in tires, different parts of the car
Equipment from the factory
"SE and SW"185/65R 15 88H60.110046J500,22/0,22(2,2/2,2)
195/55R 16 91H
"SW Cross"205/50R 17 89V6 1/2J43
205/50R 17 93W
What the manufacturer allows you to install
"SE and SW"185/65R 15 88H,T60.110045J, 5 1/2J,6J, 6 ½J500,22/0,22(2,2/2,2)
195/55R 16 87 91T, H
"SW Cross"205/50R 17 89H, V5 1/2J, 6J, 6 1/2J43
205/50R 17 93W

Checklist of advantages of ART Motion tires

1. The car gains high controllability. Excellent driving characteristics are observed even on wet asphalt. This is achieved thanks to special arc-shaped grooves on the inside of the tire. This is a kind of drainage system for quickly removing water from under the wheel. 2. The outer part of the rubber contains special enlarged relief blocks. They are necessary to increase the stability of the car during drifts. 3. The tread pattern is designed to minimize noise while driving. 4. There are three longitudinal grooves on the tread; they are necessary for the directional stability of the car. 5. Tire pressure levels are maintained for a long time. 6. Due to low rolling resistance, fuel consumption is minimal, and the car accelerates faster. 7. Increased traction with the road is observed. Due to this, the braking distance is minimal and there is no slipping. 8. Despite the high quality, tires cost minimal money.

If you take the most expensive version of the Vesta car, it will have German Continental tires measuring 195/55/R16. This is one of the best solutions on the market today. At the same time, the optimal wheel size for the Lada Vesta is 16 inches.

As a result, the manufacturer equips the Lada Vesta with high-quality cast or stamped wheels. After replacement, it is important to install an equally high-quality option. Let's discuss the remaining opinions in the comments.

Review of the best summer and winter tires

For a comfortable ride, you should have two separate sets of tires - for driving in the summer and winter. If you have a limited budget, the Sava Adapto HP MS tire will be the optimal solution for summer. Its cost will be no more than 3,800 rubles per cylinder. At the same time, it is durable and can be used even in winter.

If you have enough money, you should purchase Michelin Crossclime+ tires. Its price is slightly higher - from 4,500 rubles. The wide contact patch makes it easy to keep the car on the road in any weather conditions. The tread has many channels to drain water from the contact patch.

Goodyear Vector4Seasons tires will cost slightly less than Michelin. However, they will make the movement of the car no less comfortable. However, unlike the model discussed above, the rubber composition does not contain silicon. Which makes the protector less durable and wears out quickly.

Hankook RA33 has a bi-directional tread, so if necessary, the wheels can be easily switched sides. This model will be relatively cheap. The price will be approximately 3,500 rubles. The maximum permissible speed is 190 km/h. There are as many as 4 longitudinal grooves - they help avoid hydroplaning of the car.

Pirelli Cinturato P1 tires are the optimal solution for driving a car in the summer. The wheel can easily withstand a load of 610 kg. Therefore, this model is perfect for cars used to transport families.

Pirelli Winter Formula ICE studded tires provide a high level of comfort and safety - regardless of operating conditions. Even when driving on ice, the car stays confidently on the road.

Hankook W429 tires with steel studs allow you to move at high speed in the cold season. Thanks to the unique composition of rubber, it does not harden at low temperatures.

Nokian HKPL-9 – business class studded tires. Thanks to the unique fastening of metal dumbbells, they remain in place throughout the entire period of operation.

Gislaved Nord Frost is distinguished by its low cost (no more than 4 thousand rubles for 1 wheel) and durability. Maximum speed – 190 km/h. Using such tires, the driver will not have to worry about his safety on the road in winter.

Continental Ice Contact will cost 4,500 rubles or more. This model was introduced back in 2015. However, it is still considered relevant.

You can install any tires or wheels that fit your size on your Lada Vesta car. Installation of R14 is also allowed. However, you must first make sure that there are no compatibility gaps.

Rating
( 2 ratings, average 4.5 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]