Bolt pattern of rims and wheels on a VAZ-2112: parameters, photos

In 1999, the first VAZ 2112 model rolled off the assembly line of the Tolyatti plant. This modernized “ten” received sportier handling and improved performance. The interior of the five-door hatchback remained almost unchanged compared to its predecessor, but the exterior was transformed.

The Lada 112 combines all the advantages of the VAZ 2110, as well as the positive qualities of previous models. The car's interior is equipped with rear seats from a VAZ 2111.

The car is available in several modifications, so it can have different wheels, for example, R13 and R14.

Selection by car model, tire or wheel size

By car By tire size By wheel size

The highlighted entries mean factory sizes, the rest are replacement options

Modifications

1.5i 16V 1.6i 1.6i 16V 1.8i

VAZ 2112 2007 1.5i 16V

Generation: 2112x Power: 93 hp | 69 kW | 94 PS Engine: I4, petrol Central hole diameter: 58.6 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

VAZ 2112 2007 1.6i

Generation: 2112x Power: 80 hp | 60 kW | 82 PS Engine: I4, petrol Central hole diameter: 58.6 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

VAZ 2112 2007 1.6i 16V

Generation: 2112x Power: 89 hp | 66 kW | 90 PS Engine: I4, petrol Central hole diameter: 58.6 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

VAZ 2112 2007 1.8i

Generation: 2112x Power: 97 hp | 72 kW | 98 PS Engine: I4, petrol Central hole diameter: 58.6 mm Thread: M12 x 1.25 Fastening type: bolt Years of manufacture:

Sizes of wheels, tires and disks of VAZ 2112 of other years of production

1999 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009

This is interesting: How to drive on winter tires

VAZ 2107

There are several types of tires for the seven. The industry produces them in seasonal versions:

• Summer,
• Winter,
• All-season.

In order to save money, drivers prefer to install all-season wheels on their cars; their standard size is 175/70R13 82T, where:

175 — profile width;

70 is the ratio of the height to the width of the profile.

R - radial type tire.

13 — landing diameter.

82 - load capacity coefficient.

T is the highest speed developed by a car on such wheels.

VAZ 2114

Tires of two sizes are relevant for the hatchback: R13, R14. Full details can be found in the technical manual. The optimal size is considered to be R13. In summer, such models are completely safe.

R14 tires are considered more suitable for winter. Tires with dimensions 175/65 can be considered an ideal option for driving on snowy roads, as well as icy tracks.

When choosing, be sure to take into account the width of the tire. It will not allow the car to “drown” in the snow; it will only be pushed to a certain depth.

Factory wheel parameters depend on the vehicle configuration. They can be standard or slightly enlarged:

• 175/65R14,
• 175/70R13,
• 185/60R14.

For such tires, wheels on the VAZ 2114 are suitable 14.4x98. Moreover, their width is selected according to the size of the tire. Usually it is in the range of 5-6.

If R15 are installed, the wheels must be 6.0/6.5x15 4x98. For R16 tires – 6.5x16 4x98.

Types of rims

Today Russian disks have become very popular:

• KiK,
• Scud.

Car enthusiasts give a very high rating to the products of the Verkhnaya Salda metallurgical plant, which produces forged models called LS FlowForming.

Light alloy cast products made in Germany are also in great demand:

• A.E.Z.
• Dezent,
• Dotz.

The samples listed above have long been considered classics among car rims.

The Italians delight with their beautiful appearance and attractive design. The most striking of their products are:

• OZ Racing,
• Alessio.

In recent years, Korean products, manufactured in Taiwan, Indonesia, and South Korea, have begun to appear on the domestic market.

It must be said that all these rims differ from their analogues in very high quality. The fact is that for production at factories the latest technology developed by the world's leading manufacturers is used.

Engineers from Japan, Italy and Germany have been developing such a technological process for many years. Therefore, all the nuances and subtleties of production were taken into account. The innovative technology they created enabled Korean specialists to produce only the highest quality products.

When choosing, there are two more points to consider:

1. Front-wheel drive VAZ 2112 cars can be equipped with 5.5x14.6x14 wheels.
2. If a low-profile tire is installed, you can use 6x15, 6.5x15.

However, I would like to warn you that the manufacturer does not allow the installation of r15. Complications may arise during the technical inspection. Tires of this size do not fit all wheels.

What tire sizes does the manufacturer recommend to install?

The standard size depends on the body type. Moreover, all cars without exception used discs with a hub diameter of 58.5 mm. The amount of overhang could fluctuate - within 37-40 mm. The rim width is also typical - 5-5.5J. The most common model is 2110. This digital combination is used to mark a car with a sedan body.

The manufacturer recommends the following sizes:

• 2110, 21101, 21102 – 175/70 R13;
• 21103, 21104 – 175/65 R14.

"Razboltovka" - 4x98 mm. A special modification is the VAZ 21108 Premier car. The car was produced for a relatively short time - from 1999 to 2001. The only difference from previous versions is that alloy wheels with a diameter of 13 inches were installed at the factory. There are no fundamental differences for station wagon cars.

The issue was carried out between 1997 and 2004. The wheels installed at the factory differed depending on the modification of the car and the marking of the specific model:

• 2111 – 175/70 R15;
• 2111i-2114 – 175/65 R14.

Hatchbacks were produced, like most other cars in this series, until 2004. The diameter of the wheels and their dimensions also differed slightly depending on various factors:

• 2112 – 175/65 R14;
• 21122 – 175/70 R13;
• 21124 – 175/65 R14.

Using tires of standard size and diameter will avoid damage to the body and other troubles. However, the automaker suggests the possibility of installing custom-sized wheels.

Bonus

Suppose you have chosen a wheel rim from a foreign car for your Zhiguli, which has the same bolt pattern and rim width, but the offset is greater than expected. For normal operation, you need to install a spacer, the width of which will be equal to the difference between the offset of the purchased disk and the original indicator.

For example, I bought Alfa Romeo wheels with a 4*98 PCD bolt pattern, 5.5J wide, and 14 inches in diameter. However, their reach is much higher than expected and is equal to 49 millimeters (ET49). So I need to make or buy a spacer with a width of 15 to 20 mm.

If you found it interesting, please like (click on the heart) and/or share with your friends. And in order not to miss such useful articles, subscribe.

Do you have any questions or want to supplement the material? Be sure to write a comment.

What non-standard sizes can be supplied?

Installing wheels with a diameter or width larger than the standard size may cause a malfunction. Before purchasing, you must ensure that the installation is safe. A good solution is a preliminary “trying on”. You should install the wheels before purchasing. It is especially important to check the front tires: they should not touch the fender liners or the car body.

Often, too high a tread height leads to contact with the fender liners. This can have serious consequences:

• damage to the plastic of the wheel arches;
• mudguards become damaged and cease to perform their function;
• Cavities and rust appear at the points of contact between the tread and the paintwork.

The latter is especially dangerous. Since unprotected metal rots quickly, literally within 1 winter. AvtoVAZ cars have never been famous for their high-quality anti-corrosion treatment. Also, increasing the weight of the wheel by literally a few kilograms will lead to accelerated wear:

• wheel bearings;
• shock absorber struts and other suspension elements.

The manufacturer allows the installation of the following non-standard tire diameters on VAZ 2110 vehicles and modifications:

• R15;
• R16;
• R17.

The diameter of R14 is typical and relatively small. It is allowed to use tires with a tread width of up to 185 mm and a height of up to 75-80. Tires with a diameter of 15 inches are also usually installed on this car without any problems. R16 is a tire that requires some driving skill. Since this diameter is not standard, the machine is not designed for this weight and size.

R17 and R18 can only be installed after some modification using a special roller - the wheel arches simply “roll out”. This will avoid contact between tires and body parts. Also, constant friction of the tread on the fender liners will cause the pattern to quickly wear off and lead to deterioration of the wheel’s grip on the road.

This is interesting: What is the wheel bolt pattern on the VAZ 21099

How to choose summer tires

To correctly select seasonal tires, a motorist must know the answers to questions.

1. Speed ​​index of tires. Each ramp is made taking into account speed loads. The motorist should find out what maximum speed he will drive at, which will significantly narrow the search sector.
2. Weight load. Each car has a unique weight. Therefore, you need to buy slopes for it. If the safety margin is not enough, the tire may burst or fly off the rim, which will lead to negative consequences.
3. Intended terrain for use of the vehicle - asphalt semi-slick tires should not be expected to have normal grip on wet ground. Such tires will slip on primers and wear out quickly. Likewise, “toothy” tires will not work well on asphalt - the tread will quickly wear off, while at the same time producing strong noise and vibration.
4. Price. You shouldn't expect high performance from cheap tires. Budget models are suitable for infrequent trips at moderate speeds, which is justified by their ease of implementation.
5. Manufacturer. Due to the high responsibility of the part, automakers do not recommend buying tires from dubious brands. You should also first verify the authenticity of the products - counterfeits of famous corporations available on the market may not completely meet the requirements.
6. Composition rigidity. Soft slopes will hold the road perfectly, but will wear out quickly. Hard versions, on the contrary, take a long time to ride, but have little grip on the road surface.

Taking into account all the parameters, you can proceed directly to choosing tires.

What is the tire pressure

It is important to constantly monitor the tire pressure - this will avoid difficulties when operating the car.

It should be noted that for different tire sizes the value may differ slightly:

• 175/70 R13: for front wheels – 1.9 MPa, for rear wheels – 1.9 MPa;
• 175/65 R14: for front wheels – 2.0 MPa, for rear wheels – 2.0 MPa;
• 185/65 R14: for front wheels – 2.0 MPa, for rear wheels – 2.0 MPa.

Some drivers deliberately inflate the front wheels below the manufacturer's specified value. Main reasons:

• less load is placed on the suspension;
• minimal feedback to the steering wheel when hitting bumps or other road irregularities.

However, low blood pressure causes:

• deterioration of management;
• quick “grinding” of the tread along the edges of the tire;
• increased gasoline consumption - by 10-15%;
• uneven axle load.

Excessively high blood pressure also causes problems. For example, when heated to 60 degrees Celsius or higher, the wheel may simply burst.

General background information

Ranges of possible values ​​for tires and wheels VAZ 2112 2000. Tires

Wheel disks

Photo

Expert advice

When choosing tires for a car, you must first follow the manufacturer's instructions. Ask yourself a few questions.

• On what roads will the car be primarily used?
• Do you need increased cross-country ability?
• How much of the route will be city roads and how much will be highways?
• Will the vehicle carry heavy loads?

The answers to these and similar questions will help determine which tire parameters you need to pay special attention to.

How to choose the right wheels for a VAZ 2112 2000?

3 types of rims:

• Stamped (economical price category) - made from a sheet of iron by stamping on a press.
• Light alloy - manufactured by casting (more reliable than stamped ones).
• Forged (the highest quality and more expensive than the previous ones) - made from light alloys by stamping at high temperatures.

The choice depends on financial capabilities. However, it should be borne in mind that the quality of the road surface on which you have to drive every day must also be taken into account.

So, if it gets into a hole, a stamped disk will bend and will not cause harm to the tire, but a forged or cast one can cut it. There is a possibility that the cast disc may burst or crack.

It should also be noted that repairing “stamping” wheels is cheaper than repairing cast or forged wheels. But wheels with high-quality cast and forged disks kill the suspension less, because lighter and have more perfect geometry (better balanced).

The same wheels may or may not rub with tires on the same car - wheel alignment adjustment will help here.

What is the tire pressure?

It is the driver's responsibility to constantly monitor tire pressure. This will avoid standard problems associated with vehicle operation. An abnormal pressure value often causes:

• deterioration of management;
• uneven tread wear.

Often the car owner independently reduces the pressure in the wheels of his own vehicle. This reduces the load on the suspension, and the car “passes” various road irregularities an order of magnitude easier. But it is worth noting: a decrease in pressure even by 0.1 MPa leads to serious problems. The main ones include:

• increased fuel consumption;
• rapid wear of the outer tread segments;
• the car becomes less maneuverable.

An overinflated wheel causes no less problems. The central part of the cylinder begins to wear off quickly. In addition, at ambient temperatures of more than 60 degrees Celsius, the tire may simply explode. Which will lead to driving into the oncoming lane.

VAZ 2115

The factory is equipped with two standard sizes: R13, R14. Dealership centers that sell tires for imported cars offer tires that fit the VAZ 2115:

• 175/70 R13 82T.H,
• 175/65 R14 82T.H,
• 185/60 R14 82T.H.

Accordingly, it requires installation of disks:

• 0JR13 H2, PCD: 498, ET35,
• 5JR13 H2, PCD:498, ET35-40,
• 0-5.5-6.0JR14 H2, PCD:498, ET35-40.

The diameter of the mounting hole must be at least 58.6 mm.

What is a bolt pattern?

4 holes for bolts is 4.

• The first number “4” indicated in the parameters indicates the number of holes located on the hub, intended for screwing wheel bolts into them.
• The second number “98” indicates the diameter in millimeters of the circle in which those same mounting bolts are located.

Thus, it is not at all difficult to calculate that the bolts are located at a distance of 69.3 mm from each other.