License plate light for Lada Largus - replacing the bulb. What kind of light bulb is it? Replacing with an LED lamp

How does the Lada Largus license plate illumination work?

In the Lada Largus, one lamp is responsible for illuminating the license plate, located on the rear of the vehicle immediately behind the decorative molding. The lampshade looks like this:

At night, this lamp illuminates as follows:

How to replace the lamp?

Replacing a license plate light bulb is absolutely not a complicated procedure.

• Using a thin screwdriver with a flat tip, carefully press out the fixing element of the lampshade and take the latter out.
• When the cartridge is completely removed from the mounting socket in the rear bumper of the Renault Logan, disconnect its power connector.
• By pressing the latches, carefully remove the transparent diffuser.
• We remove the old lamp and install a new analogue in its place.

Before directly performing the replacement procedure, we turn on the backlight mode, only after that we begin the indicated manipulations. LEDs have polarity, so if after installation they do not work, simply turn them over (180 degrees) and the devices should “come to life”.

Replacing the license plate light bulb on a Lada Largus

The license plate light bulb for the Lada Largus is very easy to change. To replace, we will need a TORX T-20 wrench.

1. Unscrew the license plate light, which is located in the left rear tailgate. To do this, we use our prepared Torx T20 key.

2. Dismantle the diffuser of the room lamp.

3. Remove the light bulb from the socket.

5. Reassemble the lampshade in reverse order.

Replacing the license plate light bulb of Lada Largus video

Tuning with “protection elements”

During a complete transformation of a car, it is worth thinking about its safety. Most often, the protection system concerns the rear and front bumpers. They are equipped with special elements made of stainless steel or polymer coated. These pads are used to prevent damage to the rear bumper from damage, for example when loading luggage through the rear doors. To protect the wheels from various stones and dust, wheel arch liners are used.

A rubber seal is installed on the rear doors of the car, which serves as a soundproofing element. To protect the radiator, you can install a special mesh (most often black or chrome is used), its cells allow air to pass through perfectly, and at the same time protect the radiator from various types of foreign bodies (stones, dust, insects).

Carbon film is an excellent element of protecting the body from minor scratches, which will also give a stylish look to your car. There is a huge selection of different colors and materials.

Thus, in order for your improved “steel” friend to serve you for a long time and reliably, tuning should be approached comprehensively. In any case, after tuning, the quality and appearance of the Lada Largus depend on the amount of money invested, as well as the skills and patience of the owner.

Purpose of fuses and relays in the block installed in the cabin

Option 1

Note: On various vehicle modifications, some of the fuses shown in the images may be missing.

more details:

Fuses and relays in the passenger compartment, Option 2 (newer)

Heated rear window relay (interior)

Relay view (dashboard removed for clarity)

In a variant (on older versions), the rear window heating relay (40A) is located in the cabin, under the instrument panel. (to the left of the steering column, above the interior mounting block). To replace it you need to remove the instrument cluster. On newer modifications, the relay is placed in a common fuse block (see option 2 above)

Press the latch and disconnect the relay from the holder.

Replacing the left low beam lamp Largus

To replace the headlight bulb on the left side, you must remove the battery. After removing the battery, replacing it is quite easy and quick.

1 You need to remove the plastic protective cap by simply prying it off.

2 Next, carefully remove the electrical connector from the headlight lamp and move it to the side so that it does not interfere with us.

3 Then remove the rubber boot, which prevents dirt and dust from entering the headlight unit.

4 To complete the removal of the lamp, we need to remove the metal retainer that holds the lamp.

5 Remove the old lamp and replace it with a new one.

Payment via Yandex Cashier

After selecting payment via Yandex, the Yandex Cashier payment system will launch, where you need to select a convenient payment method (bank card, QIWI, Yandex Money account, etc.)

After specifying payment details and confirming payment, payment for the goods will occur.

If you have a bank card in a currency other than the ruble, then the money will be debited from the card at the rate of the Central Bank of Russia at the time of the purchase.

This payment method is optimal for residents of Russia, Kazakhstan and Belarus.

This is interesting: Removing the additional brake signal for VAZ (Lada) Kalina 1117 2004-2013

Price list

• Special offers
• KAMAZ spare parts
• Spare parts KAMAZ-5490
• Spare parts MAZ, YaMZ
• ZIL spare parts
• Spare parts ZMZ, for GAZ vehicles

• Spare parts for Volzhanki cars
• Spare parts for Gazelists
• Spare parts for trucks Lawns
• Spare parts for GAZ-71 caterpillar

• Spare parts UAZ, UMZ
• Spare parts KrAZ, BelAZ
• Spare parts URAL
• Spare parts BUSES
• AMAZ spare parts
• IKARUS spare parts
• KAVZ spare parts
• LAZ spare parts
• LIAZ spare parts
• NEFAZ spare parts
• PAZ spare parts
• Other buses
• Tractors, computer equipment, attachments
• Tractors and walk-behind tractors
• Municipal vehicles
• Attachments and trailed equipment
• Spare parts for TRACTORS and SPECIAL EQUIPMENT
• JCB – spare parts for special equipment
• Truck crane (KS-3577, KS-4517, etc.)
• AMZ (A-01, A-41, D-440, D-442, D-447, D-461, D-467)
• Amkodor (TO-18, TO-28, TO-30, etc.)
• ATZ (T-4A, TT-4M)
• VgTZ (DT-75)
• VMTZ (D-120, D-144, D-130, D-145T)
• VTZ (T-25, T30A-80, VTZ-2048)
• LTZ (T-40, LTZ-55, LTZ-60)
• MKSM, UNC, DETVAN
• MTZ – spare parts for tractors
• OTZ (TDT-55)
• PTZ (K-700/701/702/703/704)
• KhTZ (T-150, MT-LB)
• ChTZ (T-130, T-170, B-10, B-12, B-170, T-10M, DET-250)
• YuMZ – spare parts for tractors
• Other special equipment and tractors
• RVD – high pressure hoses and hoses
• MMZ spare parts and engines
  All spare parts from A to Z (173,877 spare parts as of 08/06/2019)

Main conclusions

Replacing low beam lamps on the Lada Largus is done according to the usual method for most cars. No special preparatory steps are required, apart from temporarily removing the battery, which does not allow access to the left headlight. When choosing a replacement lighting device, you should carefully study its characteristics and select models with more successful features for a given region or operating criteria. A good option would be models produced by recognizable companies; the pursuit of a low price will not live up to expectations and may result in unnecessary expenses.

Source: svetilnik.info

How to choose a lighting element

The range of lamps for installation in car headlights is very wide. But there are two factors that significantly limit the ability to choose:

• block headlight system, which does not allow you to use any options you like;
• code requirements that expressly prohibit the installation of all parts different from those originally applied by the manufacturer.

In the Lada Largus, the functions of near and far light are performed by one double-filament halogen lamp. This is convenient because it allows you to save space under the hood and reduce the size of the headlight unit. One tungsten filament produces a beam of light of greater brightness, directed more horizontally (far light), and the second produces a beam with an opening angle of 30°, of which 10° are oriented above the horizontal, and the other 20° below it.

The ability to reduce the size of the headlights results in the need to change the light bulb if any filament fails, even if the second one works completely stably. In addition, you constantly have to change both lamps, left and right, since for high-quality lighting you need a set of two lighting devices selected according to their features.

Lada Largus lamp base

High beam and low beam are realized using one light bulb with h4 socket. In addition, the following types of base are used for various positions:

In addition, there is a C3W baseless light bulb that illuminates the stove control.

Table of lamps used in Lada Largus

Let's look at what lamps are installed for light signaling on Largus. Front lamps:

Interior lighting and service lighting:

Fundamentally! This is a complete list of lamps used on the Lada Largus. It should be taken into account that the latest models, due to technological or other considerations, can be equipped with other types of lighting devices.

The best n4 lamps for Largus

To install the Lada Largus in high/low beam, you need H4 halogen lighting fixtures provided by the headlight optics. More popular models:

• Philips X-treme Vision. Colorful lamps giving cool snow-white light. This is comfortable in good weather, but in fog or snowfall the lighting efficiency decreases sharply;
• Philips LongLife EcoVision. Cheap models with extended operating time;
• Osram Original Line. All-weather system with extended coverage area;
• Bosch Pure Light. They have bright light and an extended service life.

According to users, the best option is Bosch Pure Light, the cheapest and most colorful designs. Philips X-treme Vision are very expensive and often quickly fail; in addition, vision 130 models are often counterfeited by careless manufacturers from Southeast Asian countries. Products from the Osram office are an average option in terms of features and service life, but when purchasing you need to carefully look at the supply voltage - almost all models are designed for 24 V.

Troubleshooting Some Problems

If, after replacing the lamp, the low beam on the Lada Largus still does not light up, the cause of the malfunction may be a blown fuse. Replacing them is even easier than the paws, since they are located in the cabin, on the left side of the steering column.

Two fuses are responsible for the low beam:

• F9 – left headlight.
• F10 – right headlight.

Note! Even if the fuse is not visually damaged, a new one should be installed in its place.

Often the cause of the malfunction is poor contacts of the fuse terminals. In this case, you just need to clean them.

It should be noted that there is no low beam relay on the Lada Largus, therefore, if replacing the fuses did not produce results, all that remains is to check the contacts in the headlight itself, which could have burned out or oxidized.

Often the light disappears due to poor contact of the machine ground wire. In this case, the problem is also solved by thoroughly cleaning the contact. If it was not possible to restore the light, you need to contact a service center for help.

Here, perhaps, are all the instructions for correcting the most common VAZ wiring faults.

Trade marks

Depending on the volume of your orders per month, we offer our clients the following prices:

Wholesale 1. – for orders from 70,000 to 170,000 rubles. Wholesale 2. – for orders from 170,000 to 400,000 rubles. Wholesale 3. – for orders over 400,000 rubles. Wholesale 4. – VIP price for individual contracts. Retail – Price for retail sales and small single purchases.

All prices are indicated including VAT in Russian rubles. You see prices according to your access level.

Source: avtotop.info

Auto catalog

• Cars

• VAZ
• UAZ
• GAS
• AZLK
• IZH
• ZAZ
• ZIL
• LuAZ
• RAF
• BYD
• Chevrolet
• Daewoo
• Geely
• Great Wall
• Hyundai
• Lifan
• Tata

Download price lists

To download price lists, you must log in. If this is your first time on the site, please fill out the registration form.