Removing and installing the hood lock and safety hook of the VAZ 2170 Priora

Priora hood - article number and price

The catalog number of this body element is 2170-8402010. New parts are sold in two versions:

• As a rule, these spare parts are painted in black primer. Price – from 5000 rub.
• Painted in factory color. Price – from 10,000 rub.

Purchasing an element for painting will require you to additionally find a service that provides the appropriate services. But at the same time, the color is precisely selected to match the actual color of the body, which is especially important for old cars, because the shade of the color of body parts changes over time.

Body parts painted in a specific factory color allow you to quickly repair the car even with your own hands. When purchasing such a spare part, the main thing is to accurately indicate the color shade in the form of a three-digit code.

In what cases will adjustment help?

Let's list the main malfunctions that you can fix yourself by just adjusting the car hood lock:

• The hood has become difficult to close; it requires repeated slamming and significant force to close it
• It has become problematic to open it (we pull and pull, but the reaction is zero)
• Doesn’t “bounce” when the cable is pulled; when closing, an extraneous knock of metal on metal is heard
• Rattling when the engine is running, in the pits.

Since it is almost impossible to describe all the models in one article, let’s take as an example a masterpiece of the domestic automobile industry - the VAZ car. Whatever they say, Lada cars roam the expanses of the former CIS more often than any foreign car.

And, given their survivability, I think this will last for a long time... And based on the principle that this procedure, on almost all cars, comes down to similar actions (if you do not take into account the design features of the locks), you can derive a general adjustment formula.

Let's start adjusting the locks, for example, for VAZ 2108, VAZ 2109, VAZ 21099.

Tools

To adjust we need:

19mm wrench.

Open-end or spanner wrench

Screwdriver, I usually use a "magic" set.

Screwdriver with replaceable bits

Oil for lubricating the lock (only liquid oil is suitable; “solidol”, “litol” and other similar lubricants are not suitable, since they harden at low temperatures, which makes the mechanism difficult to operate).

Machine oil

Desire, some free time, a head and two arms (preferably straight).

That's all we need to work

The device of the hood lock VAZ 2108/2109/21099

To begin with, open and fix the hood

Let's pay attention to the lock and try to understand the principle of its operation.

Hood lock device

The photo shows the main elements of the castle:

1. Lock latch spring
2. Lock-nut
3. Latch
4. Safety hook
5. Safety hook handle.

From what we saw, it follows that after we pulled the opening handle in the cabin, the cable opens the latch, which releases the lock latch.

Thanks to the latch spring, the hood “jumps” up, but it is still held half-open by the safety hook.

And only by pressing the handle of the safety hook, we can fully open it and gain access to the engine compartment. Quite a reliable system. At first sight…

Adjustment, although not a very difficult operation, requires patience and accuracy. Sometimes you have to repeat the same jewelry movement many times until everything starts working as it should!

Vertical adjustment of the lock

If the hood does not want to close normally (you slam it, put pressure on it, but it still closes with difficulty, or does not lock in the closed position at all), or a rattling noise appears when driving on our perfectly smooth roads (sometimes it is noticeable even just when the engine), then adjustment in the vertical direction is necessary. Namely, adjusting the length of the lock latch.

To do this, use a 19 mm wrench to loosen the lock nut on the latch, holding the latch itself from turning with a flat-head screwdriver.

Latch length adjustment

If the hood is poorly or not at all fixed in the closed position, then you need to slightly increase the length of the latch, which we will achieve by unscrewing it with a screwdriver.

If the hood rattles, on the contrary, you need to shorten the latch by tightening it several turns inward. The required latch length is determined experimentally.

Got rid of the problem? Then tighten the locknut (don’t forget to hold the latch with a screwdriver), check it again and rejoice!

Horizontal adjustment of the lock

If there are problems with opening, or if there is a metallic knock when closing, the lock requires horizontal adjustment.

Adjusting the latch position

To do this, we also loosen the lock nut and slightly move (not twist, but move) the latch in the desired direction.

When adjusted correctly, everything should close and open well. Without any effort. Ideally, the hood should slam shut completely when released from a height of 20-30 cm and snap open when pulled by the drive handle in the cabin, only being secured by a safety hook.

How to open the hood if the cable is broken

But if you have free time, the necessary tools and are confident in your own abilities, you can try to open the hood yourself; below are tips from the experts of our technical assistance service on opening the hood. Of course, the design of the hood lock and the location of the cable differ on different cars, but most often the general sequence of actions for opening the hood remains the same.

It is necessary to figure out where the hood release cable broke.

In this case, in order to open the hood with a torn (torn from the fastening) cable, you need to grab the edge of the cable with pliers and pull it towards you, i.e. towards the car interior (as shown in the photo with the hood cable). To prevent the hood cable from slipping out, you can make a loop at the end of the cable and wrap it around the jaws of the pliers. That. you can open the hood if the cable inside the car breaks.

If you examined the hood lock handle in the cabin and did not find a torn or broken cable fastening, then the most likely cause is related to a broken cable in the area of ​​the hood lock. Such a breakdown is quite complicated, because in order to open the hood, you need to get from the outside to the hood lock and force it open. We recommend that you seek the help of specialists who can open the hood and call a car mechanic from our technical assistance service.

Most often on modern cars the hood opens from the front, but there are exceptions when the hood opens forward and the hood lock is installed at the rear, near the windshield on all VAZs of the classic family (VAZ 2101 - 2107) and Nivas, see the video of opening the hood on a VAZ below.

Video on how to open the hood on a VAZ 2101-2107 and Niva

https://youtube.com/watch?v=KY6clFmLPqQ

How to open the hood if the cable breaks near the hood latch

On many cars, this can be done using an extended screwdriver or a wire hook (see photo of opening the hood), carefully insert the screwdriver or hook through the slots in the radiator grille and try to open the hood latch. On some cars, the radiator grille is solid, or does not allow you to get to the lock, in which case you need to try to remove the grille. If you can’t get to it with a screwdriver or remove the grille, there is another way to get to the hood latch - you need to jack up the car, remove the plastic or metal crankcase protection, and/or the lower elements of the bumper and try to get to the hood latch from below.

For example, this way the hood can be easily opened on front-wheel drive VAZ cars (2109, 2110, 2111, Lada Priora, etc.), as well as on our very popular Ford Focus car, which features an original hood lock with front opening.

If you can’t open the hood on your own, call our technical assistance service by phone, we’ll give you some advice, we’ll come and help.

How to extend the life of a cable drive

To prevent trouble with a broken cable from happening at the wrong time, you should take care of its serviceability in advance. To do this, during vehicle maintenance, pay attention to the condition of the drive mechanism as a whole. If the rod is very stretched, replace it. By following simple rules it is easy to extend the life of the hood opening drive.

1. When installing a new cable, be sure to lubricate its outputs with lithol or machine oil. Also treat the inner surface of the cover.
2. To replace, choose a multi-core cable. Its advantage is strength, flexibility, and slow wear.
3. When laying a new cable, try to make fewer sharp bends. It's better to take the cable a little longer.
4. Avoid sudden movements on the lever.
5. Periodically pour lubricating oil into the installed cable, for example, using a syringe.
6. When a breakdown occurs and there is no way to fix it instantly, tie the cable into a knot around the latch.
7. Before starting the journey, you need to check how tightly the hood is closed. Unintentional opening of the luggage compartment lid while driving can provoke an emergency situation.
8. You cannot use simple wire or rope instead of a special cable.

According to statistics, the service of opening the hood is one of the most popular in car service centers. Especially in winter. A conscientious car owner who carefully monitors the condition of all car parts will avoid a trip to the service station for this reason.

This is interesting

Sometimes, if the wear on the Priora hood hinge is not too great, some craftsmen make do with improvised means. Without replacing the unit, various shock-absorbing materials made of rubber and plastic are installed under the mounting arms.

Locksmiths call this “fooling” the Priora. Also an interesting option. Sometimes it's worth considering it too. The video shows a way to “deceive” the Priora’s hood hinges for a while:

About a couple of months ago, with the arrival of warmer weather, I began to notice a knocking noise under the panel in the glove compartment area. At first I didn’t attach much importance, because... I thought it was stuff in the glove compartment! but the sound did not pass and infuriated me more and more! Lately, I was no longer happy about Mouzon, but just drove and listened to this rattling sound! It looked like some kind of iron ball was rolling around the stove! I glued all the parts under the panel where my hand reached, nothing has changed... None of my friends have encountered this, half of the donkey advisers simply said “it’s an AvtoVAZ!” So Drive can help us! It turns out that this is another Prior disease: the knocking of the hood hinge! I tried to press the corner of the hood while driving and OH MIRACLE! the sound is gone! It can be solved by either removing the hood or rubber banding under the fender! I had no desire to remove it, so I bought an elastic band from the rear stabilizer of a VAZ 2108.

I trimmed the edge a little and stuffed it between the wing and the hinge.

One of the problems with Lada cars is extraneous noise (crickets), which can occur after the first hundreds of kilometers. Have you encountered a knocking noise in the corner of the dashboard (panel)? Perhaps its source is not in the car interior, but in the engine compartment.

When driving on uneven roads (crushed stone, gravel), the hood shakes, resulting in a knocking sound from the hood hinge. Most often, a similar problem appears on Lada Priora cars, but it can also occur in other Lada models (Granta, Kalina, Vesta, Largus, Niva or XRAY). Foreign cars are no exception.

You can eliminate the rumble using a radical method - place a thick piece of rubber under the loop (a jet rod from a “classic” or a shock absorber strut bump stop). When the hood is closed, the hinge will tightly press the rubber damper and the knocking will disappear. Here is a video example on a Lada Priora car:

Owners of Renault Logan solve the problem of hood knocking in a similar way (put a piece of garden hose on the nut). By the way, they say on new Priors (after restyling) a standard rubber bumper is installed in this place.

If you fight the source of the knock, and not its consequences, then the hood hinge needs to be modified. It is not difficult to remove it; we unscrew the four nuts and support the hood with a stick or resort to the help of an assistant. We “modernize” the hinge design by hitting the hinge rivet with a hammer so that it stops dangling. That's it, we reassemble in reverse order.

It is pleasant to be in the car interior when no extraneous noise bothers you. Have you encountered knocks of a similar nature in a Priora? Let us remind you that the glove compartment can also rattle in the corner of the panel (dashboard).

Source

Practical guide

To complete the work you will need:

- nylon cord at least 5 m long;

- ballpoint pen body;

- a piece of thin steel wire 10 cm long or a paper clip.

To replace the hood lock drive rod (together with the shell), it is necessary to perform labor-intensive work - remove the instrument panel. Here we describe a method that allows you to replace the hood lock rod with minimal disassembly of the car. On vehicles equipped with an air conditioner, the work is made difficult by the condenser installed in front of the radiator of the cooling system.

If the rod moves easily in the sheath, but you have to change it because it has broken off, you can only replace the wire by pushing it into the old sheath.

We carry out the work with an assistant.

1. Remove the front bumper.

2. Using an 8 mm open-end wrench, unscrew the nut of the rod clamp.

The nut is located above the clamp loop, so it is difficult to unscrew it (the photo shows the view from below).

New Lada: Generator on Granta in Balashikha, p. 2

3. We remove the rod through the slot from the bracket stop and disconnect the front end of the rod from the hood lock.

4. Remove the clamp first from the threaded rod and then from the rod shell.

5. Pull the rod shell into the resulting opening.

6. Fold the nylon cord in half and put the resulting cord loop on the bent end of the cable. We tuck the end of the cable into the sheath.

Access to the hood release lever is made difficult by the instrument panel, so the work will have to be done by touch. In the photo the instrument panel has been removed.

7. Under the instrument panel, remove the tip of the rod shell 1 from the bracket and pass the rod through the slot in the bracket. By similarly removing the rod through the slot of the lever, we remove the plastic tip of the rod 2 from the hole in the lever.

8. Pull the rod sheath into the car interior (until the cord appears).

9. Disconnect the cord from the rod and remove the rod assembly with the shell.

10. Using a piece of steel wire, bending it in half, we pull the cord loop through the body of the ballpoint pen (the tapering part of the pen body should be directed in the direction opposite to the cord loop).

11. Using pliers, bend the end of a new rod 3-4 cm long. We put a cord loop on the bent end of the rod. To securely fix the cord on the rod, we wrap the rod with insulating tape.

12. Slide part of the handle body tightly onto the shell of the new rod. Apply a little soap solution to the handle body.

13. Insert the plastic end of the new cable into the hood opening handle (see above).

14. From outside the car, use the cord to smoothly pull the hood lock drive rod, while at the same time directing the handle body from the passenger compartment into the hole in the rubber seal of the engine compartment partition and pull the cable out.

15. We fix the lock opening handle on the axis, remove the cord and attach the rod to the hood lock (see above).

When attaching the drive rod to the hood lock lever for fitting, first put the lock in place. Make sure that the rod is routed correctly: there is no twisting or creasing of the shell. Using pliers, fully extend the rod and place a mark where the rod bends. Bend the rod with pliers.

16. Further assembly is carried out in the reverse order of removal.

Lada Priora Sedan SNOW WHITE › Logbook › hood stop technomaster

Today I started installing nishtyaks from Tolyatti, I started with the hood stop. I admired this stick for the last time

I’ll describe in detail how I did it - first you need to remove 19 of these pistons

old stop retainer

I tried to remove the casing but the lock didn’t work, I didn’t tear it, I unscrewed the two nuts by 10

for some reason I decided to glue it with a vibrator, washed the hood, degreased it and stuck on a little more than a sheet

Through the hole in which there used to be a hood latch, we insert a bracket, after that we put the trim on and secured it to several pistons near the bracket. The second end of the bracket should come out through the hole in the hood a little to the right into which the piston was inserted, we secure with two nuts and washers the upper mount of the stop on the hood, the lower one I didn’t buy the mount, the brace was already on the brace, I screwed a bolt with a round head from the stop into the hole of the brace, the stop itself was securely packaged and instructions were included to install the hood stop on the fasteners, it’s best to use two people, since you first need to remove the standard stop, and then click the gas gas into the mount stop. now opening the hood is a pleasure

I can’t open the hood on the RAV4 '07 - TOYOTA - forums on diabloarea.ruVery often on…

Installing and setting up an electromechanical hood lock Many car enthusiasts who live in our vast country…

Lock for the hood of a VAZ 2109 car. At the moment, you can find different types of locks on the market...

How to make gills on the hood with your own hands? All actions in a step-by-step version. This is a rather difficult question...

Lada Priora Hatchback Legends were made about it › Logbook › Modernization of the engine cooling system More…

Good day! A problem appeared: the hood moves when driving, a knocking sound appeared in the panel along the edges. I didn’t pay attention to it, but the knocking became louder and louder. After reading the Internet, I saw the fastest way to treat this sore - to put a stabilizer rubber band from the classics in loop.

I drove like this for another six months, until the hood started to rumble with it too) I decided to fight this problem. I couldn’t find any new hood hinges in the city, so I took a different route. To do this, I need an assistant

We removed the hinges - they wobble like snot)) We hit the rivet with a hammer before the play disappeared

grabbed the rivet by welding to the hinge itself)))

We also saw that there was a crack where the hinge was screwed to the body (We welded the crack)

We collected everything, put the hood on, now it stands firmly, does not wobble even on a bad bumpy road. The knocking in the panel disappeared, a smile appeared on the face while driving) Let's see how long this modification will last. If this problem returns in the future, then only replace the hinges.

The stage of work is as follows: 1) Unscrew the leads with the wipers 2) Remove the Jabot 3) Remove the trim from the hood 4) Disconnect the washer tubes 5) Unscrew the hood hinge, 2 nuts on each side (you can mark the places with a marker where the hinges are adjacent to the hood or then align the hood according to the gaps when assembly)6) Remove the hood, put it to the side7) Unscrew the hood hinges from the body8) Replace the hinges with new ones, or hit the rivet with a hammer until there is no play. Reassemble everything in reverse order.

How many times has each car owner opened and closed the engine compartment lid of his Priora? But hardly anyone thought that the hinges connecting the hood to the body are not like the simple devices of an ordinary garden gate. This is a very serious mechanism that you need to be able to properly disassemble and replace if necessary.

It wouldn't hurt to know

What do most owners of new Lada Priora do? Naturally, they treat the body with Movil or something similar against corrosion; they don’t have any more problems at the initial level. However, there were complaints about squeaking when pressing the clutch pedal; sometimes it was present when the engine was warm, sometimes only when it was cold - the essence is that there is a problem.

Of course, everyone immediately starts reading the “primer book” on how to correctly adjust the clutch on their Priora, which sometimes helps, but the fact of the matter is that sometimes. After this, owners can try several more methods, after which the squeak may disappear:

• Replace the drive cable, some drivers praise the “tenth”.
• Check the presence of a spring in the automatic tension mechanism; sometimes the effect can be achieved after replacing the standard part with a spring with greater elasticity.
• A certain percentage of car enthusiasts get rid of the crackling noise by lubricating the fork and the plastic cable nut.
• Lubricate the installation site of the plastic bushing on the pedal bracket with lithol.
• Remove the boot from the fork lever and lubricate the gearbox input shaft with graphite grease from a can.

It is worth considering another effective method, shown in the video, which is used by experienced car enthusiasts. Its essence is as follows:

• Disconnect the mass air flow sensor and remove the air filter.
• Remove the clutch release rod plug.
• Release the cable from the clutch fork.
• Pour 30-40 ml of gear oil from a syringe.
• Move the fork back and forth 10-15 times.
• Reinstall the cable, plugs and filter.

Using the example of the second part of the article, it becomes clear that adjusting the clutch drive does not always bring the desired effect in the fight for acoustic comfort. Although, from a technical point of view, the procedure is necessary, since it ensures productive operation of the car.

Troubleshooting in a car service center

Car breakdown, like illness, always comes at the wrong time. Many types of damage are difficult to predict without regular diagnosis. If the breakdown occurred suddenly and you urgently need to repair your car, use the Uremont.com website.

It contains the addresses of more than 3,600 professional car repair shops capable of repairing any car of varying complexity. The smart map will automatically determine your location and display the addresses of the service centers closest to you. This is especially convenient during a business trip or traveling to unfamiliar cities.

The main problem drivers have when contacting a car service center is mistrust. They worry that they may receive low-quality services or encounter incompetent specialists. This problem is especially relevant if you are in a foreign city. On the Uremont.com website we have collected only trusted car services for you, to whom you are not afraid to entrust your car.

To have your car repaired, leave a request on the website, providing the necessary information:

• Car model.
• Year of manufacture of the car.
• Your contact details.
• Your location.
• The type of breakdown that needs to be repaired (for example, the hood is knocking).

After filling out the form, you will be able to get to the car service offered to you, where professional mechanics will quickly and efficiently fix the problem.

If necessary, you can order a tow truck by checking the appropriate box. The price of car repairs will pleasantly surprise you, and the quality of service will ensure a long and comfortable ride.

Uremont.com is a convenient assistant for fast and qualified repair of your car.

Adjusting the position of the hood lock on the Prior

Welcome! The hood lock is the lock that snaps the hood and thanks to it it does not open; if the position of the lock is too much, the hood will either not close at all, or you will simply not open it anymore (If you continue to press on it with all your might , trying to close), in addition, the hood may close, but over time (Usually this happens at speed) due to the fact that the lock is displaced, the hood may open and therefore it deforms the windshield of the car (If this happens while driving), and the hood itself will also be damaged and the roof may even become deformed. Note! Adjusting the position of the lock is carried out in the presence of the following tools, namely in the presence of: A wrench size “10” and gloves (Instead of a wrench, various kinds of socket heads with a collar, or ring wrenches and something like the same tools are also perfect )

Where is the car hood lock located? Lada Priora is one of the few cars on which the lock is located under the front bumper, for example, if you take the classics, the Samara family, then the lock is in the most visible place and to adjust it, it will be enough to stock up on a minimum set of tools and a little time to carry out work, on the Lada Priora, in order to get to this lock, you will have to completely remove the front bumper (we will inform you about how to do this as you read the article) and only after that you can start making adjustments; for clarity, this lock is shown in bright arrow in the photo below:

When do you need to adjust the position of the lock that holds the hood? A little higher (at the beginning of the article) we already said that the hood may be due to an unadjusted lock, namely, it may open spontaneously, or not close at all, if the hood does not close, then there is only one conclusion, the lock is displaced in such a way that the latch that is located on the hood itself cannot enter the hole of this lock and lock into place (the latch hits the edges of the lock, for example), but if the hood suddenly opens spontaneously, this means that the lock is again displaced and the latch still gets into it , but very weakly, and thus when driving (at speed, mostly) the hood opens.

Painting

Nothing lasts forever on Earth and over time, scratches appear on the hood and rust forms. Therefore, many motorists specially order it in plastic. But for those who have it made of metal, there is only one thing left to do - paint it.

Can't do the job without:

• Boards;
• Cotton gloves;
• Paints;
• Air compressor;
• Spray gun;
• Acidic soil;
• Degreaser.

Painting is carried out as follows:

1. The car must be thoroughly washed with a special shampoo. Remove dust and dirt from all hard-to-reach places and it is advisable to use different brushes for this work. Wash the floor well and blow through all the walls with a compressor. It is important that there is no dust left anywhere. Before painting, douse the floor with water.
2. Remove the hood. First you need to unscrew the bolts that hold the gas stops. Support the hood with a wooden stick. When the gas stops are removed, remove the hinges.
3. Carefully inspect the places where stops and hinges are attached. Usually this is where corrosion always starts. If you come across places where the metal has rotted, then such pieces need to be cut out. Make a patch and weld it.
4. Install the hood. To do this you need to use special sawhorses. You can do it yourself. You need to take several boards and nail them crosswise. All old paint from the surface of the hood is carefully removed. This work should be done using sandpaper or coarse sandpaper.
5. Degrease the surface with a special solution and apply a thin layer of acidic primer. After drying, putty is applied. Let the hood dry again.
6. The surface is degreased again. Then the paint is applied with a spray gun. The paint is applied in several thin layers. It is important to remember that each new layer of paint is applied after the previous one has completely dried.
7. The dried paint is sanded. The surface is degreased. A layer of varnish is applied.

If the painting process was even slightly disrupted, the entire work should be done again.

How to open the hood on a Lada Priora yourself

For experienced car enthusiasts, this task is not difficult. It’s another matter if the car owner is a novice or an inexperienced woman. The experts who prepared the article will help you understand this issue.

Anyone can do this job if they strictly follow the instructions. So, you need to act according to this algorithm:

1. Find the hood release handle and then pull it towards you several times. Finding the handle is not difficult, since it is located to the left of the steering wheel, closer to the corner of the trunk, deep into the pedal.
2. You need to open the hood from the street, that is, from the outside. To do this, you need to get out of the car, stick two fingers into the gap that is available after opening the lock.
3. Next, you need to feel the metal handle with your hand and press up. In this case, you need to lift the hood up.
4. Once it opens, it can be secured using a stop.

Closing the hood is very simple. It is enough to remove the latch and then lower the hood down by hand, where it will fall under the lock. Next you need to inspect it to make sure it is tightly closed.

How to detect a broken cable

If you have the right tools and mechanical skills, you can solve the problem of a broken cable in your car yourself. To do this, you need to open the hood according to the above instructions, and then find out exactly where the break occurred. You need to carefully inspect the place where the cable is attached. If you see that it has come off the fastening, then either it is broken or the problem is in the cable, that is, it is faulty. If the problem is not related to the fastening, it means that the cable has broken in the area of ​​the hood lock. This is a very complex breakdown. In this case, to open the hood, you need to get from the outside to the lock itself and force it to open. Here you need to be careful not to break or damage anything.

Many modern cars have a hood that opens from the front. However, models from the VAZ automobile plant are equipped with a hood that opens forward, and its lock is located at the back, not far from the windshield.

If you have done all the above work, but the hood still does not open, then you need to contact the vehicle technical support service. The workers themselves will come and try to solve your problem.

Methods of protection

In past times, regular masking tape was used for this purpose. But it's a bit silly and makes the car itself unattractive. Today there is a slightly different way - protection using anti-gravel film.

It is noted that thanks to this simple device, less dirt will get on the windshield. To make sure of this, you need to pay attention at stops at intersections. While the car is stationary, much more snow falls on the glass than when it is moving. The deflector not only changes the aerodynamics of the car, it is capable of changing the air flow. While driving, dirt flies past the car.

This is a small drawback of this device. Any changes always lead to increased fuel consumption.

There is another minus. The device must be fastened very well. Adhesive tape, even the thickest one, is not able to withstand it; it is not advisable to use self-tapping screws. The load will increase, vibration will appear, and the mounting points will quickly wear out.

There is another way to protect yourself. Use of anti-gravel and decorative films. It adheres in much the same way as window tint. In this case, the work is much easier. With its help, the hood will be reliably protected, and the appearance will not be spoiled.

Another way to protect your hood is with a protective polish. You should always use polish after washing. Let it wash off quickly, but as long as it is on the car, it is protected. Although the polish will not protect you from pebbles, it will fill the microcracks, which means there will be no corrosion. You just need to touch up the chips from time to time.

1 Topic by 4istoff 2015-12-15 20:40:30

Topic: Resolved: The hood latch latches on the first click but does not close completely

The hood latch latches on the first click but does not close completely((what should I look for the reason? Thank you

2 Reply from Denis Artyukhov 2015-12-15 20:48:13 (2015-12-15 20:48:43 edited by Denis Artyukhov)

4istoff, lift it up a little.

3 Reply from 4istoff 2015-12-15 21:50:29

4 Reply from klimashov.roman 2015-12-15 23:06:04 (2015-12-15 23:06:34 edited by klimashov.roman)

5 Reply from 4istoff 2015-12-16 05:07:00

Ok, I'll try it today, thanks

6 Reply from Denis Artyukhov 2015-12-16 10:30:27

4istoff, at the same time center the lock. Or maybe it goes sideways.

7 Reply from 4istoff 2015-12-16 12:50:12

Replacing the cable and lever for opening the hood of a Priora

If you pull the Priora hood release handle and the hood lock does not open, then there are only two possible causes of the malfunction:

1. the hood cable is broken or disconnected;
2. The plastic hood release handle broke.

To troubleshoot the problem, it is not necessary to contact a service station. Replacing the Priora hood cable, like replacing the handle, does not require special conditions, skills or tools and can be done independently.

Necessary tools and spare parts

To replace the cable or hood handle, you will need:

• open-end wrench or socket 10;
• flat screwdriver;
• marker;
• wire or thin rope longer than the length of the hood cable;
• new hood cable or new handle;
• oil or grease.

Replacing the Priora hood cable

Before working on replacing the cable, you must disconnect the ground terminal from the battery. Otherwise, when working in the engine compartment, and especially under the instrument panel, you can create a short circuit. It is also necessary to remove the front bumper from the Priora. Replacing the Priora hood cable is performed as follows:

• Mark with a marker the position of the bolt washers securing the hood lock to the body panel (this will allow you to easily adjust the hood later);
• unscrew the bolts securing the lock to the body;
• remove the lock from its mounting location;
• remove the end of the rod (cable), having first straightened it;
• remove the metal sleeve from the cable;
• remove the cable from the slot in the lock by first sliding the end of the braid;

Important: adjusting washers are installed at the tip of the shell, which may be needed in the future. Therefore, they must be carefully removed and not lost.

• remove the end of the hood lock cable sheath;
• unscrew the nut securing the cable sheath holder;
• remove the holder from the stud and from the cable braid;
• press inward and remove the plastic hood cable holder;
• tie a wire or rope to the end of the cable (which will simplify the installation of the new hood cable);
• remove the mounting block under the dashboard to facilitate access to the hood release handle;
• press the hood handle located under the dashboard, then remove the hood cable from the slot in the bracket;
• remove the tip of the hood cable from the hole in the hood release lever;
• remove the braided cable into the interior so that the rope does not come out with it, but remains in its place;
• untie the rope from the hood pull rod;
• pull the new hood cable out of the braid and lubricate it, or pour a little oil into the braid for lubrication;
• tie the end of the rope to the new hood cable;
• by pulling the rope, blow the hood rod (cable) into the engine compartment.
• Installation of a new hood cable is carried out in the reverse order of its removal.

Replacing the hood handle of a Priora

The plastic of the hood handle is fragile and can break if you apply excessive force when opening the hood. The handle is inexpensive and is attached with just one bolt. However, its location greatly complicates the work. Replacing the Priora hood handle can be done either with or without removing the dashboard. The latter option is less labor-intensive, but requires the use of a drill and leaves a small hole in the dashboard.

In both cases, it is necessary to loosen the tension on the hood cable by unscrewing the clamp nut.

To remove the hood opening lever, you need to pull the cable end out of it and unscrew the fastening bolt. Access to it is complicated by a torpedo. If you do not dismantle it, you will have to drill a hole in it of such a diameter that a socket head with an extension can fit through it. The hole is completely invisible from the interior. but if desired, you can close it with a plastic plug.

After installing the new lever, you need to tighten the fastening bolt, insert the tip of the hood cable into it and tighten the latter.

ladaservice.info

Removal

4. 10 mm socket wrench

Unscrew the two bolts securing the hood lock.

Warning! To avoid injury, perform the following operation carefully - the radiator fins have sharp edges.

5. Use pliers to straighten the end of the lock drive rod. Slide the locking sleeve from the end of the rod and disconnect the rod from the lock lever.

6. Remove the hood lock.

7. To remove the hood safety hook using a 10 mm socket wrench

unscrew the two bolts securing the hook bracket and remove the hook.

Replacement process

To carry out this procedure you will need:

• screwdrivers - figured and flat;
• marker;
• a piece of fabric;
• set of socket wrenches.

This is a sufficient set for the procedure. Open the engine compartment cover (hood) and secure it well with the stop. Unscrew and remove the windshield wipers. Pull out the decorative plugs holding the air intake panel of the Priora heater. You will have access to the base of both loops. Carefully place the fabric on the glass, under the lower edge of the Priora hood. Now unscrew the nuts securing the hinge to the lid itself. The second person must fix it so that it does not fall. When all four nuts are unscrewed, remove and carefully set the hood aside to avoid damage. Now you can remove the hinges themselves for replacement or repair.

Be sure to use a marker to mark the points where the old hinges stood and dismantle them. Under them there are rubber gaskets that also need to be replaced. Remove any dirt that has accumulated under the base of the loop and wipe the area. The main thing is not to erase the marks. Install according to the marks and carefully fasten the new hinges. Lubricate moving parts well with grease

Now, together with your partner, carefully put the Priora hood back in place.

When the cover is in place, without large gaps and evenly, tighten all the nuts well. Reinstall the air intake panel and wipers. Close the decorative caps.

How to install

Before installing a new cable, you need to thoroughly lubricate both the bushing and pin on the pedals. The plastic composition Litol-24 is best suited for this.

Then the end of the cable is threaded into a hole located in the bulkhead of the engine compartment on the passenger compartment side of the car so that it ends up in the engine compartment. The rubber cover is also tucked in there.

The gear tip driver is put directly onto the clutch drive pin and secured with a bracket.

The end of the shell is secured with a nut to the pedal bracket. Make sure that the fixation is secure. It is unlikely that anyone will like to, if something happens, climb there again due to a poor-quality connection.

Next, under the hood, the lower part of the shell is stuck into a special hole on the gearbox bracket.

The leash is screwed onto the end of the cable (there is a thread there) - the latter should protrude approximately one turn outward, but no more.

Now comes the time to adjust the clutch drive. Upon completion of this process, the pedal is pressed all the way two or three times and then the setting is repeated.

The working surface of the tip driver must be treated with the above-mentioned lubricant.

All that remains is to make sure that the entire mechanism is now working properly and install all previously removed parts in place.

Other Possible Causes

If the problem is not a violation of debugging, it means that one of the parts of the locking system has broken. Let's not consider the option of the integrity of the lock: I think you checked it first.

One of the most likely failures is fatigue of the metal from which the spring inserted into the radiator “TV” is made. As a result, it weakens and stops working as it should. Its weakening can often be easily detected by simply pulling on it: the resistance will be quite weak. The spring is changed, the hood fixation is restored.

The next element that quite often breaks or becomes loose is the support tins under the spring. In this case, you can close the hood, but this requires 2 people: one pulls the handle that opens the lid, the second slams the hood, and only after that it closes. The fact is that when installed, the spring should not close the entrance to the lock guide in the center; it should be shifted to the side and cover this sector by 30 percent, no more.

If the condition is not met, the support washer bends and there is no engagement. You need to straighten the tin and place a washer under it while tightening the cable.

A way to eliminate the last defect may be to shorten the cable. However, it is better for a non-professional not to do this: there is a high risk of damaging the cable itself. If you decide to go this route, it is better to go to a service station. We have listed the main reasons why the hood on a VAZ 2114 does not close; Let's hope that our advice will help you improve the situation. And it’s even better if they are not useful to you at all due to the absence of such a problem.