Rear view mirrors of the VAZ 2107: design, modification and replacement

Rear view mirrors are important elements of any car that ensure traffic safety. High-quality mirrors allow the driver to fully control the situation on the road. The standard mirrors of the VAZ 2107 do not meet modern requirements. Therefore, owners of sevens are trying to modify them or replace them with more functional models.

• Types of mirrors for VAZ 2107
  Universal mirrors
• Enhanced view mirrors
• F1 mirrors for tuning
• Mirrors designed specifically for the VAZ 2107

  Photo gallery: mirrors for VAZ 2107 produced by NPK POLYTECH

• Table: technical characteristics of mirrors produced by NPK POLYTECH

Instructions for complete disassembly of the side mirror of a VAZ 2110

How to disassemble the side mirror on a gilly mk: Atlas Auto

Instructions for complete disassembly of the Nexia side mirror. Instructions for complete disassembly. Instructions for complete disassembly of the Nexia side mirror. This instruction is general because Everyone can see in it the disassembly of the mirror exactly to the extent that he needs: someone needs to remove only the mirror element to install heated mirrors, someone needs to fix an adjustment cable that has flown out. Therefore, if you only need to remove the mirror element, there is no need to disassemble the mirror down to the last screw. We snap off the plastic triangle in the interior that covers the mirror mounting screws. Then unscrew the fastening screws and remove the mirror from the car. Carefully remove the first rubber gasket, because It is quite problematic to purchase new ones; they are rarely sold separately for repairs. Similarly, remove the second rubber gasket. Unscrew the two screws.

Download instructions for completely disassembling the side mirror of a VAZ

Then at one end of the wire we cut an m3 thread approximately 15 mm long, looking at Fig. 5, we insert it into the body of the future mirror. The wire should pass through the washer and then through the entire spring. Screw both nuts onto the wire and place one end of the spring on the bracket Fig. 7. The free end of the wire protruding from the side of the triangle (Fig. 5) must be firmly secured to something “immovable”. Or, twist a loop and put it on your own foot’s boot to check your deadlifting strength! In general, we pull the body of the mystery mirror “towards ourselves” as hard as we can until the assistant finally inserts the fixing key into place Fig. 5. Note: Swapping with an assistant is possible. The need to remove the side rear view mirrors of a VAZ 2110 may arise for various reasons, for example, for painting, installing heating, or completely replacing them. Disassembly is therefore necessary to carry out repairs or any other modifications. How to remove the rear view mirrors of a VAZ 2110 detailed instructions. Pry up the rearview mirror control knob cap and unscrew the mounting screw with a Phillips screwdriver. Remove the triangular plug by prying it up with a flat-head screwdriver, carefully releasing the latches as you do so. Next, unscrew the three screws that secure the mirror to the base, using the same Phillips screwdriver. You can remove the mirror element from the body in several ways: Dismantling the mirror, pressing on the central part of the mirror from the inside, and snap it off.

Dismantling and disassembling the rear view mirror of the VAZ-2110

There are many reasons for disassembling a car side mirror. This may be a desire to paint it, or to put it in order after its channels were caught by some reckless driver. How to disassemble a car mirror, and before that, how to quickly and easily remove it, is of interest to many car enthusiasts. Due to inept movements, a car mirror can become completely unusable and then it will be necessary to purchase a new one, and as a result, the mirror will be installed in a car service center. But there are many brands and, moreover, models of cars, as well as mirrors for them. There are also many varieties of electric mirrors, folding, with turning elements, and so on. The most important thing is how to remove it so as not to damage it. VAZ 2110, 2. Instructions for. Side mirrors of VAZ 2110. Complete disassembly.

How to disassemble a car mirror - disassembling the side

Removing the side mirror. Disassembling the side mirror. Forums faq on actions for brands and models. Disassembly instructions. Reasons for analyzing the side. Look at the Chinese mirror on the VAZ 2110.

Tuning VAZ: Body

Up. Disassembling the mirror. VAZ 2110 may arise according to. VAZ 2110. Side mirrors.

Complete instructions. Mirrors VAZ 2110: disassembling mirrors. In the housing of the side mirrors of the VAZ 2110. The auto industry has an advantage in the domestic market. Dismantling mirrors. Mirrors VAZ 2110;. Hotpoint ariston oven fz612 1ixha instructions State registration of rights to real estate form Statement of inventory and assessment of fixed assets object form Instructions for fire safety in the painting area

Information

Before placing an order, we recommend that you familiarize yourself with the general information on Payment and Delivery of goods in the online store.

Basic provisions of the online store: 1. All orders are placed through product order form located on the website. 2. Coordination of the completed order is carried out via the email specified by the client in the order form. The client can be advised over the phone on the choice of a particular product. The exception is orders from St. Petersburg - they are agreed upon with the client by phone. 3. Delivery to regions of the Russian Federation and CIS countries is carried out by Russian Post , cash on delivery or 100% prepayment. Estimated delivery times for orders to Russian regions are 5-15 working days. 4. The cost of delivery of goods is calculated individually for each order, based on the remoteness of the customer’s region, the weight of the parcel and the chosen payment method for the order. The final cost of order delivery is indicated in the letter confirming the order. Read more about delivery and payment here. 5. Orders and delivery to the CIS countries and neighboring countries are carried out only on the basis of 100% prepayment. 6. Goods of good quality can be returned within 7 days from the date of receipt. 7. Product warranty - one year from the date of purchase.

Cost of covers for Kalina mirrors

They cost on average from 500 to 1000 rubles, depending on the shape, color and method of attachment. Unpainted overlays can be purchased for only 200 rubles. Chinese cheap analogues cost very little (100-300 rubles), but are significantly inferior in quality. They are more fragile, brittle and inelastic.

Mirror covers for the Lada Kalina are the simplest but most noticeable tuning element!

The VAZ service station provides complete diagnostics and repairs of the Lada Kalina (1118) sedan.

Our car service specialists have extensive experience in maintaining and repairing VAZ vehicles, and thanks to our own auto parts store, we always have the necessary parts in stock.

View the price list for basic VAZ repair work

Prices for our car service services are significantly lower than the market average, which allows you to carry out high-quality repairs at an affordable price.

STO VAZ provides the following types of services:

• Car repair Lada Kalina (1118) sedan;
• Full diagnostics of VAZ 1118: diagnostics of the engine, brake system, suspension, compression measurement;
• Maintenance of Lada Kalina 1118 sedan: changing engine and transmission oil, replacing filters, replacing technical fluids, replacing the brake system and timing belt;
• Repair of the chassis: suspension, clutch, steering, brake system;
• Tire fitting and storage;
• Car wash;

VAZ-1118 is a new model of AVTOVAZ LLC, the production of which began in 2004. This is a five-seater passenger car with front-wheel drive, a front engine and an all-metal welded body. Lada Kalina is distinguished by a reinforced structure of the roof, sills and central pillar. Additionally, safety is ensured by bumpers made of impact-resistant polypropylene. The engine is four-cylinder, four-stroke, in-line, eight-valve, with a displacement of 1.6 liters.

In the basic configuration, Lada offers electric power steering, and as an additional set of options you can choose seat belt pretensioners, air conditioning, airbags, heated front seats, electric rear-view mirrors and an anti-lock brake system. All VAZ-1118 vehicles are equipped with special catalytic exhaust gas converters.

The exterior rear view mirror on the Lada Kalina is designed and dismantled very simply and conveniently, like everything on this model of a domestic car (in my opinion, the best in terms of price-quality ratio).

This particular mirror is suitable for both Tens and Priora. As we can see in the photo above, the mirror mounting principle is the same as on other Ladas, with one small difference. The side mirror is attached to three self-tapping screws using a shaped screwdriver (see photo above).

The side mirror itself (in this case, simple, without a turn signal repeater, with manual adjustment) consists of two parts. The main part (the mirror itself) and the protective cover. Connect these parts carefully and accurately by aligning the grooves on the mirror and the inserts on the lid and press it. It should click into place.

Next, lean the mirror on the outside of the door so that all three guides and the cable connection fall into place (photo above). Then, screw in and tighten the three screws. Make sure that the mirror on the outside of the door is level and properly positioned.

And now, that same “one small difference” - instead of the Zhiguli plastic nut that we screw onto the connection of the control cables, here it is attached to the same Zhiguli corkscrew, which on the classics secures the door lock cylinder. And finally, put on the plastic panel so that the adjustment lever fits into the rubber frame, lean the panel against the two guides in the corresponding holes and press it.

Mirror for Kalina, price 3000 rubles (with mechanical adjustment and without repeater)

Sources

• https://expertvaz.ru/lada-kalina/razobrat-nakladki-zerkala.html
• https://remontvaz.spb.ru/lada-kalina-1118-sedan/
• https://arbi-idirisov.ru/kak-pomenyat-bokovoe-zerkalo-na-kaline/

How to disassemble and repair a rear view mirror?

How to disassemble and repair a rear view mirror? What is needed for disassembly How to remove a mirror How to disassemble a mirror, 2 methods Repair rules

It often happens that the rear view mirror mount becomes loose and the mirror does not hold well or falls off (perhaps someone caught it while driving). It happens that the side mirror is broken or cracked - it needs to be replaced. The mirror angle adjustment drive may need to be repaired. You can contact a car service center and they will attach the mirror in place. But if there is no service nearby, you will have to act independently

The rear view mirror is extremely important on the road: the driver can monitor the situation on the roadway in the viewing area behind the rear fenders and rear bumper. Mirrors on different brands of cars are different: internal mirror and side mirrors, regular, folding, electric and others

When removing and disassembling any mirror, you need to be extremely careful not to damage the mirror itself.

• What is needed for disassembly
• How to remove a mirror
• How to disassemble a mirror, 2 ways
• Repair rules

What is needed for disassembly

In order to disassemble the mirror, you will need the following tool:

• 2 flat screwdrivers (they are used to release the latches).

• A thin, long screwdriver and a piece of soft cloth (to wrap the screwdriver).

• 10mm star wrench or regular screwdriver with interchangeable bits.

How to remove a mirror

How to remove the electric side mirror (assembled):

1. Remove the triangular trim from the front door.

2. Disconnect the mirror wiring connector. Do not damage the mirror heating wiring!

3. Holding the mirror, remove the 3 mounting screws.

4. Remove the mirror assembly.

5. We install the mirror in the reverse order.

Removing the side rear view mirror with a mechanical drive:

1. Remove the mirror adjuster locking bracket.

3.Remove the mirror.

4. Installation is carried out in the reverse order. How to remove a rear view mirror in a car

The most common option for fastening the rear view mirror to the windshield is 2 bolts. Such fasteners are found on domestic cars. To remove the interior mirror, proceed as follows:

1. Remove the caps on the bolts (if any).

2. Holding the mirror, unscrew the mounting bolts.

3.Remove the mirror.4. Wipe the area where the mirror meets the windshield with alcohol.

5. When installing the mirror, you need to make sure that the mirror “sits” in the same place (the spot on the windshield).

On a foreign car, the rear view mirror is glued to the windshield. To remove the mirror from the windshield, follow these steps:

1. Remove all plastic plugs by hand.

2. Moderately pull the mirror up (toward the ceiling).

Apply proper force (when pulling the mirror up). If you overdo it, the windshield may crack. If the mirror has already moved out of place (has come out of the runners of the bracket), and you are still pulling it with force, then you can accidentally cut through the upholstery on the ceiling with a sharp edge. On some car models there is a special lock in the form of a button (you need to press it).

How to disassemble a mirror, 2 ways

To replace a cracked mirror, you need to know how to disassemble a rearview mirror. You can only disassemble the removed mirror: it is both convenient and safe for the mirror itself. Disassembling the rear view mirror can be done in two ways:

• Having previously removed the mirror from the door or windshield. This disassembly method is safer for the entire mirror unit.

What kind of mirrors are installed on the VAZ 2106

As mentioned above, the standard exterior mirrors of the Six are not suitable for all car owners.

And there are several reasons for this:

• small size. Since the area of ​​the mirror elements in standard mirrors is very small, the review also leaves much to be desired. In addition to the limited visibility, standard mirrors have blind spots, which also do not contribute to safe driving;
• lack of protective visors. Since the “six” is a rather old car, its exterior mirrors do not have “visors” that protect the surfaces of the mirror elements from rain and sticky snow. So in bad weather the driver is forced to periodically wipe the outside mirrors. It is clear that not everyone likes this;
• The mirrors are not heated. Because of this, the driver is again forced to manually clean the mirrors from ice;
• appearance. The standard mirrors on the “six” can hardly be called masterpieces of design art. It is not surprising that drivers want to get rid of them.

We list the mirrors that drivers install instead of standard ones.

F1 type mirrors

The name F1 was assigned to these mirrors for a reason. In appearance, they resemble the mirrors found on Formula 1 cars. The mirrors are distinguished by a massive rounded body and a long thin leg.

You can purchase them at any store that sells spare parts for car tuning. The owner of the “six” should not have any problems with attaching these mirrors. They are attached to the car using a standard plastic triangle. They are held on by three self-tapping screws. To install the F1 mirrors, you only need a Phillips screwdriver. F1 mirrors have both pros and cons:

• the undoubted advantage of F1 mirrors is their modern appearance;
• mirrors of this type are adjusted from the cockpit using a special lever. This point becomes especially important for the driver in bad weather;
• but the review of the F1 mirrors leaves much to be desired, since the area of ​​the mirror element is small. As a result, the driver has to adjust the mirrors every now and then. This happens every time the driver moves the seat back slightly or changes the angle of the backrest.

Universal type mirrors

Currently, the spare parts market offers the widest range of universal rear-view mirrors for the VAZ 2106. They differ both in quality and in manufacturer. In addition, mounting methods can also differ significantly. When choosing a universal mirror, it makes sense for a novice driver to focus on a standard triangle mount. And only after that look at the appearance of the mirror and viewing angles. The fact is that to install universal mirrors with non-standard mounts, additional holes may be necessary. And drilling neat holes in the car body is not as simple a task as it might seem. There are two types of mounting universal mirrors:

• fastening using a standard triangle;

It should be noted that fastening “behind the frame” has never been reliable. Over time, any fastener can weaken. As soon as this happens to the bolts in the hinges, the mirror will jump out of the housing and will almost certainly break. And this is another argument in favor of choosing fasteners in the form of a triangle.

Video: universal electric mirrors on the VAZ 2106

Large mirrors from Niva

Some drivers prefer to take a radical approach to improving their mirror visibility. And they install vertical rear-view mirrors on their “six” (they are also called “burdocks”). Nowadays native “burdocks” for the “six” are not so easy to find on sale, although literally three years ago the shelves were littered with them. But drivers found a way out of the situation: they began installing large mirrors from the Niva (VAZ 2121) on the VAZ 2106. The visibility after installing such mirrors really improves. But, alas, it’s impossible to call such a solution beautiful: the Niva mirrors on the VAZ 2106 look too bulky.

Such “bugs” can be attached to the “six” using a standard triangle. Only in this case you will have to take two brackets from the VAZ 2106 and Niva mirrors and use them to make a new fastener for a large mirror.

Here we should also mention the new mirrors. As you know, the Niva car was updated relatively recently. This also affected the rear view mirrors. And if the car enthusiast has a choice, then it is better to install mirrors from the new Niva on the “six”.

Despite their small size, they have a good overview. There won’t be any big problems with fastening either: it’s still the same standard triangle, in which you’ll have to drill one extra hole.

Types of mirrors for VAZ 2107

Many VAZ 2107 owners replace the standard air conditioner with more modern models.

Universal mirrors

The range of universal air guards for the VAZ 2107 is quite wide. Models from different manufacturers differ in quality, functionality, installation methods, etc. You can purchase them at almost any auto store. When purchasing, you should pay attention to the correspondence of the size and mounting of the mirrors to the places for their installation on the VAZ 2107.

Often, mirrors from an unknown manufacturer that do not correspond to a specific car model are of low quality. They lure buyers with a low price. There is sad experience in using such mirrors, when they constantly shake when moving, and the reflective element spontaneously deflects. You have to constantly adjust them, which distracts you from driving. It's annoying and I want to get rid of them as soon as possible.

Often new side mirrors are attached through through holes in the standard plastic triangle. Less often, they are hooked onto the glass frame with staples on both sides.

Universal mirrors are attached to the standard triangle using screws or bolts that are screwed from inside the car

The method using staples is less reliable. Loosening the mounting bolts can cause the mirror to jump off the glass frame and fly off. This may be dangerous for other road users.

The mounting brackets for universal mirrors cling to the glass frame on both sides

Enhanced view mirrors

Often, larger side mirrors with improved visibility from the VAZ 2121 Niva are installed on the VAZ 2107. ZZV from both the old and new Niva are suitable. They are installed on the upper part of the door panel, which during installation will be damaged along with the paintwork. If in the future there is a need to change the side mirrors, you will have to restore the panel or install a side mirror with the same type of fastening.

Despite the fact that the size of the VAZ 21213 mirrors is smaller, their modern design and functionality make you choose them.

Mirrors from the Niva have improved visibility, but do not look very aesthetically pleasing on the VAZ 2107

You can also attach the ZZV from the VAZ 2121 through the standard plastic triangle. However, in this case, it will be necessary to make a new mount for the mirror from two brackets (from VAZ 2107 and VAZ 2121).

The bracket from the Niva is ground down so that the VAZ 2107 mirror fork can be installed on it

The manufactured bracket is screwed to the mirror and installed in its regular place. Such a design will not be reliable - a mechanism designed to mount a small mirror may not be able to hold a heavier ZZV. When moving, a mirror installed in this way will vibrate. Therefore, this installation method is only relevant for VAZ 2107 owners with a relaxed driving style.

A bracket from a VAZ 2121, installed at a certain angle, will allow you to hold the mirror in a vertical position

A more reliable option is to install the ZZV from the new VAZ 2121 model. These mirrors are smaller in size and have a modern look and provide good visibility. They can be quite firmly attached to the standard plastic triangle of the VAZ 2107, in which additional holes are made if necessary. These mirrors can be adjusted from inside the car.

Installing a mirror from the new Niva on a VAZ 2107 will require a little modification

F1 mirrors for tuning

The F1 mirrors on a long metal leg resemble in their appearance the mirrors of Formula 1 sports cars. They cannot be adjusted from the cabin. On sale you can easily find a set of such mirrors with mounts for the VAZ 2107.

F1 sports mirrors are usually used when tuning a VAZ 2107

Such mirrors are installed on a standard plastic triangle as follows:

1. Using a Phillips screwdriver, unscrew the bolt securing the mirror adjustment lever.

   
   The bolt of the adjustment lever of the standard VAZ 2107 mirror is unscrewed using a Phillips screwdriver

2. Unscrew the two plug bolts on the side of the control lever. We take out the lever.
3. Install the plug from the mirror kit onto the triangle. We attach a mirror to the plug.

The set of sports mirrors does not require modification when installed on a VAZ 2107

Frankly speaking, these mirrors are more beautiful than practical and convenient. They have little visibility, which is why they have to be adjusted frequently, because on the road the driver sometimes wants to change the position of the backrest or the position in the seat, and at the same time the mirror immediately needs to be adjusted a little. You have to open the window and reach out, so if you prefer comfort and coziness, it is recommended that you do not choose these mirrors.

Mirrors designed specifically for the VAZ 2107

On sale you can find side mirrors produced by NPK POLYTECH, designed specifically for the VAZ 2107. The fastening of such side mirrors is completely identical to the fastening of standard mirrors. The kit even includes a plastic triangle. For the VAZ 2107, NPK POLYTECH offers more than a dozen different models.

Photo gallery: mirrors for VAZ 2107 produced by NPK POLYTECH

Model LT-5A has a golden surface Model LT-5B ASPHERIKA has a spherical surface of the usual color Model LT-5GO has a blue surface and heating Model LT-5GO ASPHERIKA has a blue spherical surface and heating

Model LT-5UBO ASPHERIKA has a spherical surface, heating and a turn signal Model R-5BO has a regular surface and heating Model R-5B has a regular surface

Model R-5G has a blue surface

Model T-7AO has a golden surface and heating Model T-7BO ASPHERIKA has a regular surface and heating

Model T-7G ASPHERIKA has a spherical blue surface

Model T-7UGO has a blue surface, heating and a turn signal

Model T-7UAO has a golden surface, heating and a turn signal

Model T-7UBO has a regular surface, heating and a turn signal

All mirrors of NPK POLYTECH have:

• durable body;
• high-quality reflective element with a wide field of view;
• increased clarity and anti-glare coating;
• cable drive for adjustment;
• heating.

Mirror models differ in shape, size, availability of options and color of reflective coating.

Table: technical characteristics of mirrors produced by NPK POLYTECH

Replacement of rear view mirrors of VAZ 2107

To dismantle the rear view mirror of a VAZ 2107, you only need a Phillips screwdriver. This is done as follows:

1. Lower the glass to its lowest position.
2. Near the mirror we move away the sealing rubber of the glass.

Unscrew the bolt from the outside of the glass frame.

Remove the mirror from the glass frame.

On the new mirror, loosen the three screws securing the triangular panel on the side of the adjustment knob so that it fits in place of the standard mirror in the glass frame. Using this panel, the mirror is attached to the glass frame.

We install the new mirror in place of the standard one and tighten the mirror mounting bolts, clamping the mirror onto the glass frame.

We return the glass sealing rubber to its place.

The entire procedure for replacing the HZV will take no more than an hour. If heated or electrically adjustable mirrors are installed, you will have to install controls for these functions in the interior and connect the wiring to them, which, as a rule, comes complete with the ZZV.

Lada 2106 #Bun Stage 1 › Logbook › Side mirrors Polytech T-7g

Hi all! I'll be brief today. Winter, late evening, -14 degrees outside, it’s time to wrap yourself in something warm, watch some good old movie, and put on the side mirrors you bought last week!

I won’t describe the process itself, it’s too simple - I unscrewed the old mirrors, the corner from the VAZ 2105/07 is no longer needed, because these mirrors have a built-in one, then you need to unscrew 3 screws from the new mirrors, disassemble them into 2 parts, insert a new corner into the door, attach the mirror body to it from the outside, and screw the screws into place from the interior, nothing complicated, it holds more than well.

A few more photos taken the very next day, during the day

View from the salon, and, in fact, a review of them:

And finally, after traveling with them for several days, I can leave the following, subjective review about them:

PROS:

— The best visibility of all the options suitable for classics — Modern look — Doesn’t rattle when driving — Folds up — There are many modifications to choose from, including electrical adjustment, built-in turn signals and heated mirror elements.

That seems to be all, but what else do you need for mirrors?

And now the CONS:

No matter how good it is, there is always a fly in the ointment... - The left mirror gets a little out of alignment when driving on our roads, it’s not critical, but for this money I have every right to demand that it stay rooted to the spot! Judging by the fact that the right mirror clearly maintains the specified settings, I conclude that this drawback is not universal, i.e. I just came across a bad copy of the left mirror... - The cables squeak unpleasantly when adjusting the mirror - Well, the price is too expensive

That's all for today! Thank you for watching)

source

Replacing a car mirror

The car mirror of this brand has several advantages:

• The 33B type mirror elements are attached in exactly the same way as the standard models, so there will be no problems with installation.
• The device housing is more durable, well protected from mechanical damage and atmospheric factors.
• The reflective element has a wide viewing angle with minimal blind spots.
• The side mirror has a heating option and a cable drive for position adjustment.

If you do not want to completely change the mirror elements on the VAZ 2107, you can use additional reflectors. These can be spherical circles that are attached directly to the reflective surface or special pads in their own housing. They are installed above the standard mirrors. Thanks to the movable leg, additional mirrors can be adjusted separately from the main ones.

Goods Car store consultants will be happy to help you choose the right interior mirrors for your car from a wide range and give useful tips on caring for them.

Hi all! Today, in the “Tuning” section, I’ll tell you how to inexpensively improve the appearance of the “six” at home by installing rear-view mirrors from the Lada Priora on it. The work is of medium complexity, therefore, with a little experience and “direct hands”, any novice car enthusiast can do it.

By the way, Priora side mirrors are not always installed purely for aesthetic reasons, or the desire to stand out from the crowd, to make the car more attractive. Many people associate the installation of rear-view mirrors from Priora with convenience. The fact is that the owners of the “sixth” know better than anyone that adjusting the side mirrors on these cars is a real pain, especially while driving. In addition, nothing is visible in these insignificantly small mirrors, there is no visibility, so driving in reverse in a “classic” often turns out to be an even more difficult task.

And as often happens in our latitudes, the problem was solved by ordinary “handy people” who, as it turned out, know better what this or that option in a car should look like. Installing a mirror from Priora on a VAZ not only improves visibility, but also, if desired, makes it possible to get another, no less useful option - heated rear-view mirrors.

Before installing side mirrors from Priora on a VAZ 2106, you should prepare:

1. Grinder (or hacksaw);
2. Set of keys and screwdrivers;
3. Putty, fiberglass, sandpaper, primer and paint;
4. Mirrors of the Lada Priora, well, “straight hands”.

Download

Published August 30, 2016

Comments and place of residence copyright holder production LLC TVpro Media Test drive VAZ 21047 was filmed in 2009. VAZ-2104 is a Soviet and then Russian rear-wheel drive passenger car with a station wagon body. It is the brainchild of the Volzhsky Automobile Plant. Produced from 1984 to 2012. Subscribe to our channel and receive the latest news, test drives and first-hand car reviews!

Sources

• https://damage.shop-antistress.ru/vaz-2107-knigi-skachat.html
• https://videoremont-mashin.ru/remont-kuzova-vaz-21079/test-drayv-vaz-21047/

Removing the “dead zone” in mirrors

Small self-adhesive spherical mirrors are sold for tuning mirrors. Their range is quite large, so the shape and size of such mirrors can be selected individually.

The field of view of spherical mirrors is much wider than that of standard ones. Thus, the problem of “dead zones” is finally solved.

To install heated rear view mirrors, use self-adhesive heating film, which is sold in stores. You will need a screwdriver, a plastic ruler, double-sided tape and heating film.

To modify the mirrors, you need to remove them from the car. Installation of electric heating is carried out as follows:

Heated mirrors are ready. All that remains is to connect the wires to the car's electrical network.

Rear-view mirrors are necessary for the driver to control the traffic situation when performing various maneuvers to change lanes from one lane of the roadway to another, as well as for the convenience of reversing maneuvers. For the convenience of the driver, the design of the cars provides for the presence of rear side mirrors located on the front doors and one internal mirror located in the car interior, centrally located near the windshield.

Replacing the external side mirrors of the VAZ 2107. For repairs you will need a Phillips screwdriver.

1. Open the door and lower the side window all the way. Find the mirror mounting screw and unscrew it.
2. After unscrewing the screw, remove the side window seal and remove the mirror mechanism.

This completes the removal process. Remove the mirror on the other side in the same way. Install in the reverse order of removal.

Removing and repairing the internal rear view mirror of a VAZ 2107. The mirror, as already mentioned, is located in the car interior on a decorative trim in the upper part of the front windshield. The mirror is also attached using two self-tapping screws, which are hidden using a decorative overlay. Use a flathead screwdriver to pry up the cover and remove it. Next, use a screwdriver to unscrew the two fastening screws and remove the mirror itself. Installation is carried out in the same order as the reverse of removal.

At this point, the repair to replace the external side and internal mirrors of the VAZ 2107 is completed.

Rear-view mirrors are necessary for the driver to control the traffic situation when performing various maneuvers to change lanes from one lane of the roadway to another, as well as for the convenience of reversing maneuvers. For the convenience of the driver, the design of the cars provides for the presence of rear side mirrors located on the front doors and one internal mirror located in the car interior, centrally located near the windshield. Replacement of external side mirrors of VAZ 2107.

This completes the removal process. Remove the mirror on the other side in the same way. Install in the reverse order of removal. Removing and repairing the internal rear view mirror of a VAZ 2107. The mirror, as already mentioned, is located in the car interior on a decorative trim in the upper part of the front windshield.

Welcome! Today we will be replacing the side rear view mirror on VAZ 2108, VAZ 2109, VAZ 21099. Note! The article only describes replacing the side mirror itself with a new one, if you do not need to completely change the side mirror, but only need to replace the mirror part of the side mirror, then in this case (see How much will it cost to replace the side rear view mirror on a VAZ 2108-VAZ 21099? 1) A new standard side rear view mirror will cost you about 550-1200 rubles.

Important! 1) Install the new side mirror on the car carefully, do not damage it! For newbies! Question: What does the standard side rear view mirror look like, which was installed from the factory on VAZ 2108-VAZ 21099 cars? 1. We prepare the VAZ 2107 car for operations (see

Preparing a VAZ 2107 car for maintenance and repair).

Remove the outside rear view mirror. Installing an exterior rear view mirror on a VAZ 2107. Installing a mirror on a VAZ 2107 is performed in the reverse order. Zvyato from: https://vaz2107club. Ru. Taken from: https://dtp-online-news.ru.

Removing and installing a mirror on a VAZ 2107

Replacing a side mirror is not a complex, skilled job. The only tool required is a Phillips screwdriver. The order of operations is as follows:

• use your fingers to unscrew the locking washer, which is located at the base of the mirror adjustment lever;
• Unscrew the screw securing the decorative trim using a Phillips screwdriver;
• know the plastic decorative trim;
• remove the rubber gasket located under the lining;
• Use a Phillips screwdriver to unscrew the bolt securing the rear-view mirror (at the same time, you should support the mirror so that it does not fall);
• remove the mirror.

To install the side rear view mirrors on a VAZ 2107 on a car, you must perform the operations in the reverse order.

Tuning

The mirrors on the VAZ 2107 are not very functional and have a good design, so the owners of the “Seven” often upgrade them or replace them with mirrors from other cars. This achieves several goals at once: the appearance of the car and the viewing angle in the mirrors are improved, the functionality of the side mirrors is increased (the ability to fold when parking, electric drive, heating). Below we will look at examples of upgrading rear-view mirrors with our own hands.