What are the best low beam bulbs for viburnum?

The serviceability of external lighting devices directly affects the provision of an adequate level of safety not only for a specific vehicle, but also for other road users. This statement is very true for the domestic subcompact model Lada Kalina. It is extremely necessary for the owners of these cars to have correct information about the type of lamps used in lighting fixtures for various purposes and to know what kind of lamps they cost.

Design Features

Kalina's light is not technologically advanced, since the optics use classic halogen elements. From the factory, the modules contain parts from Philips or Osram with the Long Life prefix, which means an increased service life.

The Kalina lighting system in the old and new body differs in the location of the modules, shape, and size. The elements used in optics are:

turn signals – PY21W;
low beam – H7/55 W;
high beam – H1/60 W;
fog lights – H11/55 W;
Dimensions – W5W.

In modifications of Kalina since 2013, running lights have been added from the factory, which use parts with the index W 21/5 W.

Some car owners cannot fit their hand into the cramped space between the TV and the air filter housing. In this case, the Kalina intake system is dismantled or the radiator grille and headlight are removed.

Heading optics contains 4 lamps

Replacing low and high beam lamps on Lada Kalina 2nd and 1st generation

Let's look at how the directional optics, that is, the front headlight, is designed. The block contains four compartments, each of which contains one element:

High beam lamp (H1);
Low beam lamp (H7);
Combined lamp for running lights and “dimensions” (W21/5W);
Turn signal lamp (P21W yellow - PY21W).

The standard size of the element is indicated in parentheses.

If we talk about low and high beams, standard power lamps (55 watts) are installed from the factory. It is not recommended to greatly exceed this value. Lighting fixtures of sizes H1-H7 look like this:

H1 – high beam, H7 – low beam

When making a purchase, the main thing is not to confuse an H7 lamp with a halogen lamp of a similar size (H4). Also, some companies produce 24-volt lighting devices.

When replacing halogen light sources, adhere to the following rules: do not touch the glass with hands without gloves; it is recommended to degrease the lampshade before installation. “Secunda” is suitable as a cleaner.

The following text shows the side and running lights:

There will be two filaments in the headlight bulb and DRL

Its standard size is W21/5W. Well, the turn signal bulbs in the directional optics use standard ones. They are equipped with a metal base, their standard size is P21W (PY21W).

The yellow lampshade looks like orange

When and why to change

The factory light is adjusted during the production process, at the time of passing technical inspection. In the new car, the modules shine with maximum power and at the peak of their capabilities. The need for replacement is determined by the following main criteria:

Reducing light intensity.
The appearance of yellowness and cloudy areas on the cut-off strip.
Complete shutdown of one of the light modules.
Increased brightness after the suspension hits a pothole or has mechanical contact with the headlight.

Kalina lamps installed on the conveyor last no more than 4 years. Cloudiness, deterioration of visibility and the appearance of unlit areas appear after the filament burns and the bulb smokes. In this case, the light does not pass through the dirt well and does not reach the desired areas of the reflector. There are yellow spots of light and darkened areas on the road.

The thickness of the light module filament is calculated by production engineers. When struck, the lamp shakes and the spiral becomes thinner. An external examination reveals a large increase in beam power. This indicates that the halogen lamp will soon fail, since the thin filament heats up above the set temperature and begins to melt. The service life of a damaged part ranges from one minute to several hours.

Which lamps are best to use in Kalina

To find out which lamps are installed in Kalina during assembly, you need to remove the cover and pull out the part. The name, model and type of spare part are printed on the case. AvtoVAZ uses products from Philips as the main light. However, some models contain parts from Osram.

When searching for light bulbs in Kalina, you should be guided by proven options:

number on the Kalina body or in the vehicle passport;
a burnt-out sample previously removed from the lantern.

The body number is entered into a special window that pops up when you visit online resources with catalogues. Such systems independently determine the year of production, configuration and type of lighting equipment and offer a list of original spare parts and replacements for Kalina.

The number is provided to the seller in the store to accurately determine the part code. A simple and reliable way is to remove the lamp from the base and buy a new one based on the sample. In this case, you avoid purchasing the wrong part and having to go back to the store for an exchange.

The Kalina hatchback and sedan use the same lighting devices. The type of spare parts is no different for the station wagon.

When choosing a light bulb, it is important to adhere to the recommended parameters from the Kalina manufacturer. Installing a light with a higher power will lead to melting of the internal parts of the optics and damage to the contact group. After installing cheap substitutes, damage is possible due to poor quality assembly of the part and even explosion of the bulb.

Audio system for lada priora overall dimensions // Bishkek house sale

Parameters Car Lada Priora Body type 4-door sedan. Number of seats 5. Overall dimensions, mm length 4350 width 1680 Audi A6 2002 windshield wipers sometimes do not work

Lada Priora hatchback car reviews from car owners (VAZ, sedan, Lada Priora station wagon photo of the Lada Priora salon: overall dimensions A car with air conditioning and a CD audio system is estimated at 380,000

The history of the creation and development of the VAZ-21728 Lada Priora hatchback. You will forget about many of your difficulties, worries and problems in transporting people and large cargo, get a front-wheel drive type. Dimensions. Length, mm, 4330. Width, mm, 1680 Standard audio system (without CD), no

LADA 4×4 5-door Sign up for maintenance; Sign up for a test - Lada Priora Coupe Overall dimensions, length, width, height, mm, 421016801435

reporting mother siberia farm car loans sims

Bishkek house sale

tester hut start racing buy bishkek house sale audio systems for opel vectra c dimensions, lada priora, overall dimensions, lada priora, audio system, overall dimensions, overall, audio system for lada priora, overall, lada kalina, priora, audio system for lada kalina, overall, kalina, lada, audio system, dimensions, overall dimensions, audio system

massages couriers

The history of the creation and development of the VAZ-21723 Lada Priora hatchback. in a ratio of 2:1), makes it possible to transport luggage of non-standard sizes. transport impressive luggage with significant overall dimensions. Reliable Standard audio system (no CD), no a6 bdv engine audi tails how to check the oil in the automatic transmission

"RosAvto" - Offers to buy a LADA Priora - VAZ 2170 car in Kyiv. LADA 2170 - configurations and prices. LADA 2170 Dimensions and weight: Length 4350 Audio system (FM+CD+MP3+USB+Bluetooth), 4 speakers

Bishkek house sale

Technical characteristics of Lada Granta sedan and full Comparison of overall dimensions of Lada Granta and Lada Kalina (enlarge)

5 Sep 2012 It is worth noting that the luxury version of the Lada Kalina 2 will have these options and looks very impressive - this is the audio system

Bishkek house sale

fun playpens lift

drag block headlight sofa mudguards support

Lada Kalina Universal (Lada Kalina Universal) side lights not turned off, reverse gear engaged, vehicle diagnostics

The ergonomics of the driver of the Lada Priora sedan are provided by: power window control unit, electric power steering, standard audio system, air conditioning system, central Dimensions and weight airport in Chelyabinsk how to get there on the map

How to replace the lamps yourself

Changing a light bulb in Kalina yourself is not difficult. The time spent on the work depends on the skill of the driver and the size of the hands. Some owners change light fixtures in 15-20 minutes without removing the headlight, while others suffer for more than an hour and ultimately dismantle the optics.

When replacing, cloth gloves are used. This helps protect the skin on your hands and also prevents contact with the bulb. When touched, fingerprints remain, which heat up when the light is turned on and after a while burn through the thin glass.

During work, the battery terminal is unscrewed to avoid a short circuit, which will lead to burnout of the fuse link in the fuse box.

Far module

Replacing the high beam lamp is easier than in the low beam module, since the cover is located closer to the radiator grille.

To perform the operation you will need:

Turn off the Kalina engine.
Open the hood lid.
Remove the protective boot on the back of the flashlight.
Carefully disconnect the plastic chip.
Open the latch.
Pull out the lamp.

Assembly is carried out in reverse order. When installing the terminal, you need to check the contacts and, if necessary, clean them using a flat-head screwdriver, sandpaper or a special chemical spray.

Low beam

Replacing a low beam lamp on a Lada Kalina depends on the experience of the owner and is divided into two types:

Without removing the headlight.
With module dismantling.

Most Kalina owners cannot replace the lamp in the left headlight due to limited space. In this case, you will have to ask a more dexterous friend or dismantle the lighting device yourself for convenience.

To change lamps on installed optics:

Unscrew the filter housing near the left headlight and move it towards the engine.
Disconnect the washer motor terminal, remove the screws and move the reservoir to the side.
Open the light module seals.
Remove the block with wires.
Remove the spring clip.
Remove the part.

Assembling the headlight with a new spare part is carried out in the reverse order.

To dismantle the headlights, you need to unscrew the grille, fasten the modules and disconnect the contact chip. Place the removed optics on a convenient surface and replace the light elements.

Side direction indicator lamp

Design of the lamp A12-5-2 W5W for side direction indicators VAZ 1117, 1118, 1119 frets Kalina:

Designation of the side direction indicator lamps Lada Kalina:

According to EEC - W5W;
According to GOST - A12-5-2.

Technical characteristics of Lama A12-5-2 W5W side direction indicators frets Kalina:

Power - 5 W;
Light - normal;
Base - glass;
The base is flat;
The color of the flask is transparent;

Dimensions of the side direction indicator lamps for Kalina cars

The diameter of the flask is 10.3 mm;
The size from the tip of the flask to the seat is 20.7 mm;
Lamp height - 26.8 mm;

Installation location of the A12-5-2 W5W side direction indicator lamp for Kalina frets:

There are two such bulbs installed on the car.

Before you start repairs

Before changing the low beam lamp on Kalina, you need to check the integrity of the on-board network:

When understanding the causes of failure of any component of electrical equipment, you should first make sure:

the fuse is in good working order;
look at the circuit connectors, which should be well secured;
Often the causes of electrical equipment malfunctions are the oxidized ends of the pads; their terminals should be cleaned.

Take a good look at the places where the car is connected to ground. Often, due to the lack of reliable fastening, disturbances in the functioning of electrical equipment occur, so replacing low beam lamps on Kalina may not always help with the problem.

the equipment will help to find faulty places in the electrical circuit;
is a combined electrical measuring device.

There are several types of such devices:

digital, equipped with a liquid crystal display;
analog;
universal models, characterized by the presence of a liquid crystal screen and a dial indicator.

Multimeter

During repairs, we recommend using a digital device (in other words, a multimeter), which is small in size.

To check de-energized circuits, the device should be switched to ohmmeter mode:

if you need to measure very low resistance (for example, within a few Ohms), you should enter a clarification - from the obtained indicator we subtract the internal resistance, the electrical resistance of the probes and multimeter wires (within 0.07 Ohms);
to determine a more accurate value, the device is switched to the mode for measuring low resistance values (up to two hundred Ohms), then the ends of the probes should be short-circuited.

To check live circuits, the multimeter should be switched to voltmeter mode (the limits of permissible measurements are up to twenty volts). The device is capable of measuring the current consumed by electrical equipment of vehicles (up to ten amperes).

In cases where the task is to find out whether or not there is voltage in a certain section of the circuit, without resorting to measuring the value, you can use a special indicator light designed for twelve volts. You can also use a test lamp.

You can make it yourself:

you will need a car lamp with a power of up to 4 W;
take 2 two wires, the length of which is from 500 mm;
solder them to the lamp.

The car is equipped with 2 headlights, in which halogen lamps are mounted. There are two screws on each to adjust the light beam. They make it possible to change its direction in the vertical and horizontal planes.

The headlights have an electric corrector, which, taking into account the vehicle load, allows you to change the vertical direction of light directly from the cabin. There is also space on the block for the turn signal lamps (orange) and the parking light. Some Lada Kalina cars are equipped with fog lights, which are installed in the holes of the front bumper.

Replacing the relay and fuse

Before repairing the fuse, you need to clarify and correct the cause of the blown.

Advice: to ensure that electrical equipment elements continue to remain in working order, it is not recommended to install homemade models or fuses with an increased rating.

Work instructions:

Prepare the vehicle for the process and disconnect the wire from the negative battery.
Pull the tab located on the left side of the instrument panel to open the mounting block.
Find the required fuse for the damaged electrical circuit on the housing of the mounting block, following the sequential numbering.
Take tweezers and pull it out of the socket.
Squeeze the body of the fuse with tweezers. A damaged thread will indicate a used part.
Install a new fuse, which is inexpensive, keeping the same rating as the old one.
If you need to replace the relay, there is a puller in the mounting block that will help carry out this task. Please note that a part of the same type should be installed.
Close the mounting block, connect the battery.

How the work is carried out

Let's figure out how to replace the low beam light bulb on Kalina with your own hands, the process is quite simple and, by and large, does not require any special devices, you only need your hands. But still, the tool may be needed at the preparation stage.

Preparation

It is important to ensure a comfortable and safe working environment, so remember the following:

The work can be done anywhere - even in the yard near the house, but it is advisable to go to the garage. There you can not be afraid of precipitation and, if necessary, find this or that tool.
First of all, the hood is opened and the terminal is removed from the battery. We remind you of this in every review. Therefore, make it a habit to de-energize the system when working with electrical equipment to prevent short circuits and electric shock.
Further preparation depends on what engine is installed in your car, you need to provide access to the rear of the headlight housing, and for this you need to disconnect the expansion tank on the left, and the options on the right may be different. Therefore, be guided by the situation and decide for yourself. What needs to be removed and what should not be touched.

Without easy access, work is much more difficult to carry out

Replacement process

Replacing the low beam bulb on Kalina is as follows:

First of all, you need to remove the rubber plug, which protects the interior of the headlight from moisture and dirt; this is also very important, so do not damage this element. It's very simple: grab one of the three protrusions and pull away from the body, the element will come off quite easily.

The plug is located behind the low beam headlight on the rear side

Next, you need to remove the two contacts and move them to the side; this is easier to do while the low beam light bulb on Kalina is still fixed

It is important to remove the elements carefully so as not to damage the insulation or break the wires, otherwise you will have to carry out repair work as well. After the wires are disconnected, you can proceed to the next step - releasing the latch, which presses the base to the reflector and holds the element in a certain position. To do this, you need to disengage the clamp from both sides by lightly pressing it and moving it away from the base.

With some practice, the latch releases very easily and very quickly

The latch folds back and the low beam bulb in the Lada Kalina can be easily removed. We advise you to inspect the condition of the contacts; if they are melted or blackened, it means that the failure of the bulbs is due to a malfunction in the system.

Under no circumstances should you touch the glass part, so grab the cartridge and contacts

Conclusion

Replacing lamps or restoring their functionality is not a difficult task, so it can be done without involving car service specialists right on the road. To do this, you need to make sure that you always have the necessary spare parts - a set of fuses, a relay and the appropriate light bulb. The video in this article will give you the opportunity to find additional information on the above topic.

Any car enthusiast, even with little driving experience, is well aware of the importance of good lighting on the road. Especially in cases of poor visibility, which include heavy rain, dense fog and other natural phenomena. At the same time, many drivers are interested in the question of which H7 low beam lamps are the best. Most car manufacturers equip their products with this type of headlight lamps. But not every vehicle owner knows what they are.

How to adjust the headlights on a Lada Kalina with your own hands

From time to time, drivers encounter an unpleasant and dangerous moment - a light curtain. A wide, high beam from the vehicle's lighting illuminates the space in front of the car. This situation causes 30% of road accidents.

This is easy to avoid: it is important to systematically check and adjust the position of the lighting equipment on the car. This is not the most difficult task, and can be done independently without the involvement of specialists. The algorithm is universal for all machines. As an example, let's look at how the Kalina Lada headlights are adjusted.

Description

Some time ago, H4 lamps, which have two filaments, were still very popular among many car enthusiasts, which makes it possible to turn on high or low beam lighting. Now they have been replaced by a good alternative - H7. It already has one filament, and the lamp is installed in a four-headlight head optics with a separated system of reflectors for high and low beam lighting. Nevertheless, such elements are installed mainly in low-beam headlights. And for long-range lighting optics, H1 lamps are still used, which are already outdated, but have a low cost.

A characteristic difference between these products is the presence of a flange. In this case, the distance between it and the spiral is fixed and constant. Thanks to this, the filament is in focus at all times. What are the best H7 low beam lamps for Kalina or any other domestic or foreign car? Let's figure it out.

Low beam sources

Modern technologies in the automotive industry allow manufacturers to produce a variety of products for head optics. At the same time, each company relies on its own developments and experience. For this reason, all lamps with an H7 base have different parameters regarding power and lighting spectrum, which can range from cold to warm tones.

As for power, according to the standard for H7 lamps it is 55 W. However, there are models with higher values on the market. It is only recommended for SUV owners to purchase them when driving outside the city. Usually in megacities the roads are well lit. Using strong lamps on a vehicle that is used primarily for driving on city streets can cause overload. And as a result, the on-board electrical system will fail.

Many drivers, especially beginners, constantly worry about which H7 low beam lamps are the best. Today there is plenty to choose from, since the modern market is filled with different types of headlights:

At the same time, lamps of some brands are distinguished by increased luminous flux, manufacturers of others assure consumers that their lamps last three times longer than their competitors, and still others can generally decorate head optics well with their appearance alone. It is worth considering each type in more detail.

Installation of low beam bulbs in LADA

Replacing the low beam lamp on a Lada Granta

Let's remember about gloves. They are necessary to prevent bare fingers from touching the lamp bulb. If you neglect this measure, grease marks from your fingers will lead to darkening of the flask and rapid failure of the product.

If for some reason the indicated contact occurs, then wipe the surface of the flask with a napkin soaked in alcohol.

How to change? We act:

We take a new lamp and insert it into the mounting socket in the body of the LADA Kalina 2. Make sure that the protrusion on the low beam lamp aligns with the groove in the mounting niche. This prevents things from turning.
We install the previously allocated clamp in its original place, and ensure that the antennae are completely adjacent to the center of the base, exactly at the point where the contact group is located. We hold the clamp until it snaps completely into place.
We connect the previously removed wiring.
We return the rubber protective cap to its place.
We connect the on-board network by installing a terminal on the battery.

Standard

As a rule, high-strength glass or quartz material is used to make the lamp bulb. In its inner part there is a filament and gas with the inclusion of halogen additives. Currently, such lamps are deservedly popular due to their wide distribution. The use of such products does not require any additional equipment. They create the correct lighting and, most importantly, high-quality lighting.

There are also a number of other advantages that allow you to immediately answer the question of which H7 low-beam lamps are the best for a Priora or other car:

compact dimensions;
long service life;
for the light of the quartz shell they have high strength and heat resistance;
high light output;
wide scope of application.

However, there is a significant drawback, which is the strong heating of the lamps during operation and poor tolerance to voltage changes. When replacing lamps, you should absolutely not touch the glass bulb with your hands. Fortunately, there are not many disadvantages, and for this reason, today more than a million cars are driven with such low beam lamps.

Selection and replacement of lamps Lada Kalina 1 - low beam, high beam, PTF

Several years ago, the government approved a law according to which during the daytime it is necessary to drive a car with either low beam headlights or DRLs (daytime running lights). As a result, car low beam lamps began to burn out much more often. The first generation Lada Kalina is no exception. Those who do not want to drive with low beam headlights install daytime running lights. Kalina 1, unlike the second generation model, does not have DRLs, so you have to drive with low beam headlights. From our instructions you will learn how to replace the lamps in the front headlight unit, as well as the reasons why these lamps may not work.

What lamps are installed in the front headlight unit of Lada Kalina 1

Low beam lamp - H7 12v/55w
High beam lamp - h2 12v/55w
Dimensions lamp - w5w 12v/5w
Turn signal lamp - PY21W 12v/21w

Most often, the low beam and front headlight lamps burn out, since when the low beam is on, the headlights work the same way.

As we already indicated above, H7 lamps are installed in the low beam. Today a large number of lamps of varying quality are offered with this type of base. We recommend installing only high-quality and proven lamps that have already proven themselves.

PHILIPS H7-12-55 LONGLIFE ECO VISION (4x lifespan) lamp price from 400 rubles (lamp installed from the factory)
PHILIPS H7-12-55 +30% Vision lamp price from 300 rubles (with increased brightness)
PHILIPS H7-12-55 +130% X-TREME VISION 3700K set price from 1500 (considered one of the brightest halogen lamps)
OSRAM H7-12-55 Ultra Life (3x resource) price from 400 rubles (just like Philips was sometimes installed from the factory)
OSRAM H7-12-55 +30% Super lamp price from 300 rubles (lamp with increased brightness by 30%, similar to philips)
OSRAM H7-12-55 +110% NIGHT BREAKER UNLIMITED set price from 1500 rubles (110% more light than a regular lamp)
BOSCH H7-12-55 Pure Light lamp price from 250 rub.
MAYAK H7-12- 55 price per lamp from 90 rubles (inexpensive Chinese equivalent)
GE H7-12-55 (PX26d) (General Electric) price per lamp from 180 rub.

If you want your low beam lamps to last as long as possible, you should choose

PHILIPS H7-12-55 LONGLIFE ECO VISION
OSRAM H7-12-55 Ultra Life

These lamps have an extended lifespan and therefore last longer than regular or high-brightness lamps. However, we note that some owners do not have enough light in a car with these lamps.

If there is not enough light, you can install lamps with increased brightness +30% or +110, +130% - but you must be prepared for the fact that they burn out faster than simple lamps. We do not recommend using them as DRLs.

OSRAM H7-12-55 +110% NIGHT BREAKER UNLIMITED
PHILIPS H7-12-55 +130% X-TREME VISION 3700K

When installing such lamps, it is better to install running lights and drive on them during the day, so as not to “burn out” expensive lamps with increased brightness.

Why does the low beam headlight lamp on Kalina not light up?

If you notice that the low beam headlights on your Kalina have stopped working, there may be several reasons. To eliminate it, you should check each of the reasons in turn.

Lamp burned out
Poor contact of the lamp socket
Fuse burned out

First of all, check the fuse of the headlight on which the lamp does not light. Each headlight has its own separate fuse. In Kalina these are F12 and F13. Pull out the fuse and check it visually; if it is intact, then the problem is in the block or the lamp itself.

Open the hood and remove the rubber headlight boot from the low beam headlight bulb

Remove the block from the lamp and put it aside

We press the spring clamp, move it slightly to the side and lift it up.

We take out the old lamp, install a new one and reassemble in the reverse order

Remove the rubber boot from the high beam lamp

Disconnect the wire block from the lamp

We press the metal clamp of the lamp and take out the lamp.

We install a new lamp and perform assembly

The side light lamp on Kalina 1 is located in the same place as the low beam lamp.

Carefully take the cartridge with two fingers and pull it out of the seat

Remove the old lamp from the socket and install a new one

Turn the lamp socket counterclockwise half a turn and pull it out

Press the lamp in the socket and turn it counterclockwise half a turn, remove it and install a new one

This completes the replacement of the lamps in the front headlight unit.

When replacing low and high beam headlight bulbs, do not touch the bulbs by the bulbs. And if you touch it, the lamp bulb must be wiped with alcohol.

2018-g.ru

Xenon solutions

In appearance, one can notice the almost complete similarity of gas-discharge lamps with their halogen counterparts. However, both light sources use different technology. In this case, a characteristic feature is the complete absence of an incandescent filament, since a different principle is used.

What are the best H7 low beam lamps for the Duster? Perhaps this is exactly the case, since they have a special operating principle. The luminous flux is created due to the glow of the inert gas xenon, hence the name of the lamps themselves. It is under pressure in a glass flask. There is also a small metal plate located here, which heats the inert medium. Due to the absence of an incandescent filament, such lamps are vibration-free, which is confirmed by many tests. Compared to the classic halogen counterpart, the glow from xenon is three times brighter. This becomes especially important when driving a car in the evening and at high speed.

Tail lights and lamps

The following elements are used as brake light lamps in Kalina-2: lamps with a P21W socket and a transparent bulb. Replacing such an element will not be difficult.

Brake light bulb, VAZ-2192/2194

The rear turn signals are equipped with the same bulbs as discussed above. Their bulb is colored yellow (type PY21W).

The reversing light in the hatchback is provided by a lamp of the following standard size - R10W. If we talk about the station wagon, they use lamps of a different type - W16W. They do not have a metal base.

These are the reversing lamps

In conclusion, we note the following: the light of the side and fog lights in the rear lights is provided by a combination lamp. Its standard size is P21/4W. Good luck with your choice!

One lamp illuminates the fog lamps and parking lights

It is important to know! When performing any actions with electrical equipment, you must first disconnect the negative terminal of the battery. The terminal fastening is unscrewed with a 10 mm wrench.

LED alternative

When deciding which H7 low beam lamps are the best for a Nexia, Ford or any other car, many experts unanimously agree that the future lies with LEDs. Moreover, this applies not only to the automotive industry, but also to most other industries where there is a need for high-quality lighting.

Such lamps are the most economical among all other analogues. Compared to incandescent elements, energy consumption is 10 times lower. As for the service life, there is an opinion that LEDs can work up to 100 thousand hours. They also withstand vibrations and shocks, and the luminous flux meets many requirements. Due to the absence of mercury, such lamps are completely harmless, so they can be safely disposed of. There is only one important detail here - their use requires special optics. Due to their characteristics, LEDs cannot shine at a point, which imposes certain difficulties, since conventional optics do not allow you to adjust the luminous flux.

What are the best H7 low beam bulbs in the rain? The choice fell on LEDs, but it is worth knowing about a number of disadvantages. The most important of them is the very high cost, due to which this market segment is not so widespread. Another equally important point is that the stated deadline is completely refuted by practice. Instead of 11 years, the manufacturer itself guarantees good performance for 3-5 years. This is due to one phenomenon called LED degradation. That is, the crystals gradually die off - first they lose their brightness, and then they become completely silent. Another drawback is the unpleasant spectrum. As experts in the field of psychology note, approximately 80% of respondents have a negative opinion regarding the use of such lamps at home.

Difficult choice

A wide variety of lamps for low beam lighting sometimes confuses when choosing a worthy product. However, it is worth highlighting important criteria for yourself and adhering to them as strictly as possible:

luminous flux brightness;
how comfortable the lighting is for the eyes;
life time;
Energy consumption;
price.

At the same time, when deciding which H7 low beam lamps are the best, you should not be guided only by cost and purchase models that do not inspire confidence due to their low price. The personal safety of the driver and his passengers depends on the correct choice. From the total number of manufacturers, several companies can be identified that offer products of decent quality:

When giving preference to one brand or another, it is worth asking what its reputation is. Although there are pleasant exceptions, when products from a little-known company are not inferior in quality to world leaders.

Recommendations for lighting devices

In the second modification of Kalina, the designers used an H7 type base for low-range lighting. The main source for installing such lamps is the OSRAM brand, owned by the Germans. Lighting devices with a power of 55 W are installed, which is a sufficient parameter for this type of car.

The light bulb consumes a standard on-board voltage of 12 V. Motorists have the right to choose analogues when replacing them themselves. Products labeled GE SportLight or Philips Extreme Vision are in demand. Although the price tag for such products is above average, the cost is offset by a longer service life than competitors.

If you are using a budget option with optimal parameters, we recommend paying attention to the domestic product offered by the Mayak brand. The actual service life of the lamps is decent, and the price will please any car owner. There are few negative reviews about the product online.

It is important to know that the VAZ company does not guarantee the performance of lamps that are not covered by the recommendation, and there is no explanatory text in Russian on the packaging.

Osram

This is a leading manufacturer of lighting equipment with a worldwide reputation, which was founded just over a hundred years ago - in 1906 in the city of Munich (Germany). Osram products are widely distributed among most car manufacturers, including the popular Renault concern. The high reputation of the company allows us to once and for all close the question of which H7 low beam lamps are the best for Ford Focus 2. The lamps produced have both standard power and there are models with increased light output. By purchasing light sources for low-beam headlights with the Osram marking, you can be confident in their durable and high-quality operation.

Philips

An equally world-famous company specializes in the production of a wide variety of products, including halogen and gas-discharge lamps. Few people know, but this particular manufacturer is involved in the production of energy-saving lamps, which are currently very popular.

In the automotive industry, Philips is the main supplier of lighting sources and optics to the assembly lines of many factories. In addition, the company supplies its products to the secondary market, significantly expanding its range with halogen, xenon and LED lamps.

Narva

Among the candidates under consideration, this is the youngest, but this does not mean at all that the company produces low-quality products. The manufacturer began mass production of halogen light sources in 1969. Since then, the Narva brand has become quite popular and recognizable all over the world, largely due to the optimal price-quality ratio. True German quality - this is exactly the phrase that is fashionable to hear from the mouths of many car enthusiasts, both among professionals and beginners.