Many VAZ-2110 car owners often have disputes about which oil cleaner (hereinafter referred to as MF) is better to install: with a long or short skirt.
Don’t worry, both filters are compatible with the AvtoVAZ 2110 model. They were installed with a long skirt until 2013, and with a short skirt - starting from 2014. The parts are interchangeable with each other, the dimensions and parameters are identical.
Manufacturers: domestic and foreign.
Replacing the oil filter yourself is not difficult; it is quite feasible for a driver without vehicle maintenance skills.
How to choose the right oil filter for Priora
How to choose an oil filter for Priora?
The answer to this question depends on many factors. Drivers have different attitudes towards cars produced by AvtoVAZ. Nevertheless, Lada Priora is one of the most popular brands. It is available in several body types: sedan, hatchback and station wagon. According to the classification adopted in Europe, the car belongs to the C class. Lada Priora was developed on the basis of the VAZ 2110 and is a restyled model of the famous “ten”. Over the years of production, the car has undergone a number of changes. In particular, three models are produced under the Priora brand: 2170 (sedan), 2172 (hatchback), and 2171 (station wagon).
The basic configuration of the Priora includes impressive options, for example, electric windows, airbags, electric power steering, central locking, which has a remote control type, and height adjustment of the steering wheel. If we compare this car with previous models that came off the AvtoVAZ assembly line, it is significantly better than its predecessors.
VAZ oil filters: tips for choosing
Prologue. I take the choice of an oil filter very seriously, since the engine life directly depends on it.
Unfortunately, choosing this part for a VAZ is not as simple as it seems at first glance. There are more than a dozen offers - from very inexpensive Russian products and “democratic” brands from the Middle Kingdom like SCT or HOLA to very pretentious filters from the world's leading manufacturers - for example, MANN or MAHLE.
At one time, it was easier with the “eight” - I just went to a trusted store, bought an equally proven and 146% original Delphi filter and rode quietly.
These days are different times. There are many proposals, and there are even more leftists.
At one time, I did enough research on the “oil filter” topic for VAZ.
In general, recently I have settled on two (and the best) manufacturers - MANN (W914/2) and Knecht/MAHLE (OC 384), which I take from a trusted supplier. In principle, one of these two options is always installed on the Deutschelada engine.
How often should you change your engine oil?
The car is equipped with a power unit that has a power of 90 hp. s., it has eight valves. Many engine parts are imported. Fuel consumption is about 7 liters per 1000 km, which is more economical when comparing Priora with foreign cars. However, like any part in a car, the engine needs timely maintenance (in particular, an oil change). The manufacturer recommends performing this operation every 15 thousand kilometers.
You should also take into account the conditions in which the car is operated, as well as the time of year. One of the advantages of the Lada Priora is that the engine is unpretentious in terms of lubricant quality. However, the higher quality the synthetic oil, the longer the oil filter will last. If the lubricant is of high quality, this will guarantee trouble-free operation of the engine. It will be able to start even at low air temperatures.
How to distinguish original spare parts for Lada (AVTOVAZ) cars | Fakes.ru
The company's website lada-image.ru published information about how original spare parts on store shelves are distinguished from alternative or counterfeit products.
Original LADA spare parts are sold in original packaging. Branded packaging has features that help distinguish original spare parts from alternative or counterfeit products.
Original packaging of LADA spare parts comes in three classes: “Original” class, “Standard” class and “Sport” class.
Original "Original" class packaging
The “Original” class includes spare parts that are installed during vehicle assembly on the assembly line.
The main features of the packaging of spare parts of the “Original” class:
- The combined LADA trademark is located on the front side and on the lid of the package
- Part name, catalog number and applicability
- Part photo and contact information
- Protective holographic sticker
Original "Standard" class packaging
The “Standard” class includes spare parts that have characteristics similar to the original ones, but are designed for a shorter service life.
Such spare parts are intended for LADA cars that are more than 7 years old.
The main features of the packaging of spare parts of the “Standard” class:
- The LADA verbal trademark is located on the front side and on the lid of the package
- Part name, catalog number and applicability
- Part photo and contact information
- Protective holographic sticker
Original "Sports" class packaging
The “Sport” class includes spare parts with improved technical characteristics. This class of spare parts has increased wear resistance under severe vehicle operating conditions, with an extended service life.
The main features of the packaging of “Sport” class spare parts:
- The main combined trademark LADA Sport is located on the lid of the package
- An additional LADA Sport logo is located at the top of the front side of the package
- Part name, catalog number and applicability
- Part photo and contact information
- Protective holographic sticker
- The bottom of the package is stylized as a carbon coating, which characterizes the strength of this class of spare parts.
Where can I buy original spare parts?
In 2012, a network of branded retail stores “LADA Detal” was created to sell original spare parts for LADA cars
In each, LADA car owners can purchase the necessary spare part, without doubting its originality and quality, receive technical advice, and contact the manufacturer directly with any questions they have.
Detailed information about the network of branded stores can be found on the official website lada-detail.ru.
Attention! This information from the manufacturer has not been confirmed as official information; the article was prepared on the basis of open sources.
Source: https://poddelki.ru/info/kak-otlichit-originalnye-zapchasti-k-avtomobilyam-lada-avtovaz
How to check the lubricant level?
It must be said right away that even during normal operation of the unit, the oil level in the engine cannot be at the same level. The check should be performed on a cold engine. If the engine is hot, the oil level on the dipstick may be less than or greater than the Max/Min marks. Ideally it should be in the middle between them. The condition of the lubricant must be carefully monitored; there should not be too much or too little.
In both cases, this can lead to failure of the power unit. You also need to pay attention to the cleanliness of the oil on the dipstick. No matter how reliable an engine is, sooner or later a problem will arise. It lies in the fact that oil consumption per 1000 km becomes significant. This worries many Lada Priora owners. There are several objective reasons for lubricant leakage from the engine:
If you have to add oil to the engine more often than between service trips, it is better to find out the reason for this. Increased lubricant consumption not only affects the car owner’s budget, but can also lead to a major overhaul of the power unit. In the worst case, you will have to change the engine.
Replacing the filter
In order to change the oil filter on the Lada Priora, you need to drive it into an inspection hole or onto a lift. Place a container under the engine oil drain hole to drain the fluid. Unscrew the plug and wait until the oil completely flows into the container. When the liquid has completely drained, the plug can be returned to its place, and the container with it can be put aside. The oil must be drained when the engine is hot, so extreme care must be taken. Next, warm up the engine to operating temperature and you can begin replacing the oil filter.
After this, you need to open the hood and find the installation location of the old filter. When the engine is warm, you can try to unscrew it by hand, this often does not cause any difficulties. But in most cases, the filter sticks to the working surface, and you can’t do it without the help of a special wrench. If there is none, carefully punch a hole in the side, and then, using a powerful screwdriver, unscrew the filter counterclockwise.
After successful dismantling, you can proceed to the next stage. Before installation, thoroughly lubricate the seat with oil and fill the new filter halfway. This is necessary so that during the next replacement there will be no problems with dismantling. This procedure will also avoid failure of the filter element, since the oil filter will not be dry when starting the engine. After filling, wait a few minutes until the entire inside of the oil filter is saturated with liquid.
After replacing, place the oil filler cap on the cylinder head. Fill the Priora engine with the volume of fluid required for normal operation. The amount of oil poured must be controlled using a dipstick with marks of the upper and lower permissible level. After this, you need to wait until the oil completely drains into the crankcase. Waiting five minutes will allow you to more accurately determine the oil level, which should be between the two marks on the dipstick.
Upon completion of the process, warm up the engine at idle speed until operating condition. Next, check the oil level again and add if necessary.
Source
How often should filters be changed?
In order to avoid costly engine repairs, the manufacturer advises changing oil filters every 15,000 km. Much is determined by the quality of the oil that the car owner uses. The cost of the filter depends on the manufacturer and quality. It should be noted that the cost of components for the Priora car belongs to the budget class.
A high-quality filter can be purchased in the price range from 90 to 200 rubles. Depending on the manufacturer, the diameter of the screw thread may vary. There are also differences in the diameter of the connecting ring. Overall dimensions vary depending on the capacity of the filter. The following details are common to all filters:
The composition of paper may vary from manufacturer to manufacturer. But even the fame of the company that manufactures oil filters is not a guarantee of long service life of the part. Sooner or later, the car owner notices that the car begins to consume significantly more oil than before.
Which air filter is better?
For LADA (SHIGULI) 2170 (Priora) 1.6, MANN recommends the following filters: C 22 117. Detailed characteristics of these filters can be found in our catalog.
Replacement intervals
from 30 to 60 thousand km, depending on the manufacturer’s recommendations.
Air is a necessary condition for the combustion of fuel in the engine cylinders. In the LADA (SHIGULI) 2170 (Priora) 1.6, as in other cars, this air is taken from the street and, of course, it is highly undesirable for foreign particles to get in with this air. To ensure clean air enters your engine, you need an air filter. Many people forget that the air filter also requires replacement every 40 thousand km under normal operating conditions. MANN air filters are leaders in air purification for your engine. And when answering the question of which air filter to install on the LADA (SHIGULI) 2170 (Priora) 1.6, we definitely answer -MANN. Below is a selection of air filters from the above-mentioned company for your car.
How to choose oil filters?
Depending on the quality, all oil filters are divided into three main types: budget, medium and premium. Budget filter models for Lada Priora cars include SCT, AF, ZOLLEX, UFI. Their cost is low; according to their technical characteristics, they are classified as low-quality. They have a large number of disadvantages.
In particular, the bypass valve that is installed in them does not perform its functions fully. In some cases, it sticks or leaks too much oil into the engine. WIX oil filters are also approximately in the same price category. They are produced on the territory of Ukraine. The price of SCT and WIX is the same, but the latter brand is more popular among car owners. Performance qualities are much better.
Filters that belong to the average cost class include “Livny”, Finwhale, Ween. Their manufacturers are different. For example, Ween is believed to be made in Japan. However, very often you can find products made in China, so you need to pay attention to the packaging.
More expensive ones include “Nevsky Filter” and “Champion”, which are produced in Belgium. Champion filters, according to leading automobile magazines, are considered one of the most reliable compared to more expensive models. In general, if we talk about the quality of filters that belong to the budget class, it is better to choose “Champion” and WIX parts. These brands cause fewer complaints from Lada Priora owners.
Mann filters are even more expensive. Car owners are often dissatisfied with the quality of parts of this brand. However, the reason is that the Chinese version is supplied to the Russian market with original filters. Original Mann filters are made in Germany, are of good quality, and fully justify the fairly high cost. The oil pressure sensor lights up for 2 minutes, which is normal.
When choosing a Mann brand filter, you need to know how to distinguish the original from the fake. The original filter has a glossy feel, which cannot be said about the Chinese counterpart. The instructions, which are located on the body of the German filter, are shown in pictures, but if you see text instructions, then this is a fake.
If we talk about elite quality filters, we should mention such as Mahle, Hengsi. Bosch filters also fall into this price category. Parts of this brand can be used not only for Lada Priora, but also for other brands of cars. They are significantly more expensive than Mahle. However, this is the only type of oil filter in which synthetic fibers are used in the filter element, which makes the work more efficient.
Installing a new oil filter on a Priora is not so difficult. This can be done with your own hands or at a service center. As a rule, after installing a new filter, oil consumption returns to normal. Therefore, replacing the valve stem seals can be done a little later.
Source
Replacing filters
At mileage 16,000 I decided to replace all the filters; they were still factory ones; before that I only changed the oil filter.
Previously, I changed the filter at a mileage of 10 thousand km, but this time I delayed it a little. Having bought the filter, I went to the garage to change them and only there I saw that they gave me a plastic fuel filter. Before that, I had already seen on the forums that people complained about these plastic filters, some of them burst in the winter and the fittings broke off. But I installed it anyway, before winter I’ll buy another one in a metal case and will carry it with me just in case.
After installing the new filter, I saw that the clamp that secures it, when tightened, strongly compresses and deforms the filter housing, which may be why people have it burst in the winter. I didn’t tighten this clamp too much, I just tightened it slightly so that the filter wouldn’t rotate in it and fall out. The BIG filter was installed from the factory
This much dirt came out of the old filter
On the same day I changed the filter on the accent, it hasn’t been changed there for about 23 thousand and this is what black gasoline leaked from there
Well, here’s a photo comparing the filters of the Prior and the accent, the filter on the Prior is almost 1.5 times larger
I also changed the cabin filter and bought Fortech FS-017
On the cabin filter, the arrows indicate where it is at the top and the direction of air flow, it turned out that from the factory it was in the opposite direction, of course it’s okay, but it’s unpleasant that some handymen stuck it in incorrectly.
Now about the air filter. Previously, I always used a salut air filter for cans; I liked it, it was inexpensive and it had a metal mesh on top. This time I took the fireworks again, it comes in a bag like this
As it turned out, they reduced the cost of production and now this filter comes without a metal mesh, and is made a little differently
I didn’t like this filter so I went and bought another one.
And now a small comparison of these filters: What I didn’t like about the Salyut filter is that its paper corrugations are very close to each other, and even glued in the middle
It was not made very competently, because the corrugations are pressed against each other, it will be more difficult for air to penetrate between them and it turns out that this filter will clog faster, since all the dust will remain only on this plane and will not get inside between the corrugations. The Driving Filter is made more competently
The corrugations of this filter are separated so that air can better penetrate between them
It can be seen that small stampings are made on the filter paper, which separate the corrugations from each other and prevent them from touching, thereby increasing the filter surface area and making it easier for air to pass through this filter.
In general, I don’t recommend buying Salute, they have deteriorated(
Now I’ll tell you about the mesh on the air filter, some may say that it is not needed, but I try to take it only with it. There was an incident with my father about 10 years ago when he drove into a large puddle and scooped water into the inlet. The car stalled, they thought there was a water hammer, but a filter with a mesh like this saved it. The paper on the filter got wet and stopped allowing air to pass through, then only this mesh held it in place; a little water got in, of course, but nothing bad happened. Now think about what would have happened without the mesh, if the filter got wet it would have immediately broken through since there was nothing holding it on top and the motor continued suck in air and all the water would fly into the engine.
Source
Which oil filter for LADA cars is better to choose
The oil filter is designed to remove contaminants from the engine oil. Oil filters differ not only in size and mounting, but also in the opening pressure of the bypass valve. Let's figure out which oil filter should be installed on modern Lada cars.
The modern line of 8 and 16 valve VAZ engines (detailed table) is used on cars such as Lada Granta, Priora, Kalina, Largus, Niva, Vesta or XRAY. The manufacturer's recommendations regarding the use of oil filters are the same for all modern VAZ engines, and accordingly for these cars. Where the oil filter is located is shown in the diagram (position No. 11):
The manufacturer recommends changing the oil filter along with the engine oil. The catalog numbers of oil filters should be as follows:
Currently, the oil filter can be produced in various types, “Nevsky”, “Mahle”, etc. So, which oil filters are good? Reviews of popular car magazines have repeatedly checked the service life of filters of different brands, while monitoring the quality of filtration of the reference mixture. Based on the presented ratings, it is impossible to accurately determine the leader, because... The TOP 10 varies depending on the source. For example, the popular Bosch P3274 oil filter took first place according to one online magazine, but in another source it occupies only 6th position.
To the question : What brand of oil filter is installed on Vesta from the factory? Which brand of oil filter is recommended for installation?
AVTOVAZ responded like this:
Beware of fakes. Try to buy an oil filter in trusted stores or from an authorized dealer. Sometimes a fake can be identified by certain criteria, for example, for MANN filters: the box should indicate the website, the PCT sign, and instead of “Germany” it should say “Germany”. The anti-drainage valve should be white, the instructions should be graphic and not text, etc. What oil filters can you recommend? Let us remind you that filter replacement is presented in this manual.
Source
Selection of MANN filters for LADA (SHIGULI) 2170 (Priora) 1.6
MANN is one of the leaders in the production of filters for various automotive components. MANN gives the following recommendations for LADA (SHIGULI) 2170 (Priora) 1.6.
Table of contents
Below we will look at which MANN filters can be used in various LADA (SHIGULI) 2170 (Priora) 1.6 units. When the time comes to replace one or another filter on a car, the car owner one way or another has a question: which filter to choose or which filter is better for my car, and some do not even know which filter to buy. We have posted a selection of MANN filters on our website and will answer which filter will be the most optimal.
Life hack: Priora oil filter
The oil filter of a Priora car is responsible for cleaning the oil from impurities and metal particles. There are many filter manufacturers on Priora: Mann, Livny, Big, Salute and others. The price of an oil filter starts from 200 rubles - read the article to the end: you will find out popular filters, which one is better and the article numbers (original number) for them. All the oil in the engine flows through the oil filter. Therefore, it is the most important element of the filtration system. It is located in the lower engine compartment. The degree of oil purification affects the operation of the engine compartment. The cleaning system element does not depend on the engine type (16 or 8 valves); the standard configuration may have several variations.
Dimensions of the original Priora oil filter - article number
Regardless of the type and characteristics of the engine, the factory version of the Lada Priora is equipped with one of two filter options.
Oil filter salute
Manufactures. The company has been producing filter system elements for VAZ cars since 1998. Among the advantages of the part is a bypass valve device. Thanks to this system, the part allows the oil substance to pass through it, even if it is completely clogged. Among the disadvantages is the low quality of filter paper. It often breaks.
The article number for the oil cleaning element is 2108/1012005/010. The price of the part is from 150 rubles.
Oil cleaner Lada
Releases. Car enthusiasts note the low quality of the part. Disadvantages - poor quality paper, oil leakage around the perimeter of the folding.
Part number – 2108/1012005/08. Price – from 150 rubles.
To replace a part, you need to know its dimensions in order to select an analogue.
List of oil purifier analogues for Lada Priora
Since the hole for the filter in many machines is the same diameter, many manufacturers produce these consumables under their own brand.
Manufacturer: Big filter company. The price is approximately 130 rubles. Users note the quality. Among the shortcomings is a weak seal. Article – gb 102 m.
The model is considered a foreign analogue of good quality. Those who used the analogue and installed the part found no shortcomings. The price of the mann cleaner is from 180 rubles. Article - w914-2.
Product code – ph 5822. Price – around 160 rubles. Among the reviews there are both positive and negative. The disadvantages are that the filter component is of insufficient size and density.
Article - 0451 103126. The filter will fit the characteristics of the Priora. It is distinguished by its quality and significant filtering area.
Good non-original filters: articles, price
Specifications (size):
- outer diameter: 86.5 mm;
- screw thread: M20x1.5;
- internal diameter: 58.4 mm.
| vendor code | Price in rubles | ||
| H12W05 | PH5796 | TF 61 | From 330 – 370 |
| COF100102S | W 920/21 | TF 57 | From 330 – 370 |
| COF100030S | W 914/2 | TF 32 | From 330 – 370 |
| Mann 10891 | Mann W 75/3 | TF 30 | From 330 – 370 |
| C-2512 | W 712/75 | LC-1501 | From 330 – 370 |
| C-1823 | W 7053 | LC-1400 | From 330 – 370 |
| LC-1501 | 10891 | LC-1031 | From 330 – 370 |
| LC-1400 | 10398 | LC-1030 | From 330 – 370 |
| LC-1031 | 10189 | PF4112 | From 330 – 370 |
| LC-1030 | C-2512 | PF4057 | From 330 – 370 |
| PF4112 | C-1823 | PF4033 | From 330 – 370 |
| PF4057 | TF 63 | COF100118S | From 330 – 370 |
| *prices are as of July 2022 |
Instructions for dismantling and replacing parts
To replace it, it is not necessary to contact a car service specialist. You can do the work yourself if you acquire the necessary tools and follow the sequence of activities.
What is required for dismantling and replacement
Step-by-step instructions for replacing the oil filter of a domestic car
After replacing yourself, monitor the fluid level for 10-14 days.
The oil filter is the most important element of the filtration system. The performance of the engine compartment and its components depends on the quality of cleaning. Standard cleaning elements are not always of high quality. However, this is a spare part that must be changed periodically. The car owner’s task is to promptly replace the fluid and cleaning parts. For the Lada Priora car, there are analogues of domestic and foreign production, among them there are cheap, high-quality products. You can order a spare part in the online auto parts store. To do this you need to know its article number.
Each owner of AvtoVAZ models is able to independently replace both the fluid and the filter spare part - if they have the hands. To do this, it is enough to study the algorithm of actions and make sure that you have the necessary tools.
Source
Non-original or original VAZ spare parts, what to choose?
| How do original spare parts differ from non-original ones? When it comes time for maintenance, every car owner asks himself this question. Let's look at the difference between these spare parts and determine which ones are more popular. |
Original spare parts are parts from car manufacturers that were installed on the car during its assembly on the assembly line, and after that they are sold under the brand name of the manufacturer. Features of original spare parts:
- Full compatibility with the car.
- High quality parts, and therefore the longest service life.
- High price.
Non-original spare parts (analogues) are parts from independent manufacturing companies that were not used when assembling the car on the assembly line. Features of analogues:
- The cost is an order of magnitude lower than the original ones.
- The quality of parts may vary and depend on the manufacturing company.
- Large selection and availability in warehouses.
How to spot a fake ? It is no secret that today the level of counterfeiting is extremely high, and it is impossible to distinguish a counterfeit banknote without special equipment. What can we say about packaging and labels for car parts? With the use of modern printing methods, they can be made in any way. Both non-original and original spare parts are counterfeited, and very often it is simply impossible to identify a counterfeit in a store (see example of a counterfeit oil filter). To reduce risks to a minimum, we recommend purchasing original VAZ spare parts from an official dealer, and non-original parts only from trusted stores, or directly from manufacturers’ warehouses.
Let us remind you that you can buy VAZ spare parts in trusted online stores, and you can make your choice for each part in the “Best VAZ spare parts” category.
Osipov Mikhail, VAZ 2112, Toyota Camry, driving experience 11 years.
Hi all! My name is Mikhail, now I’ll tell you a story about how I managed to exchange my two-wheeler for a 2010 Camry. It all started with the fact that I began to be wildly irritated by the breakdowns of the two-wheeler, it seemed like nothing serious was broken, but damn it, there were so many little things that really started to irritate me. This is where the idea arose that it was time to change the car to a foreign car. The choice fell on the melting Camry of the tenth years.
Yes, I had matured morally, but financially I just couldn’t handle it. I’ll say right away that I am against loans and taking a car, especially not a new one, on credit is unreasonable. My salary is 24k a month, so collecting 600-700 thousand is almost impossible for me. I started looking for different ways to make money on the Internet.
You can’t imagine how many scams there are, what I haven’t tried: sports betting, network marketing, and even the volcano casino, where I successfully lost about 10 thousand ((The only direction in which it seemed to me that I could make money was currency trading on the stock exchange, it is called forex.
But when I started to delve into it, I realized that it was very difficult for me. I continued to dig further and came across binary options. The essence is the same as in Forex, but it’s much easier to understand. I started reading forums and studying trading strategies. I tried it on a demo account, then opened a real account.
To be honest, I didn’t manage to start making money right away, until I understood all the mechanics of options, I lost about 3,000 rubles, but as it turned out, it was a precious experience. Now I earn 5-7 thousand rubles a day.
I managed to buy a car after half a year, but as for me, this is a good result, and it’s not about the car, my life has changed, I naturally quit my job, and I have more free time for myself and my family.
You will laugh, but I work right on the phone)) If you want to change your life like me, then here’s what I advise you to do right now: 1. Register 2. Practice on a Demo account (it’s free). 3. As soon as you get something on the Demo account, top up your REAL ACCOUNT and go to REAL MONEY!
I also advise you to download the application to your phone, it’s much more convenient to work from your phone.
| What spare parts do you buy for a VAZ car? |
Interesting site? Share with your friends
Source: https://xn--2111-43da1a8c.xn--p1ai/repear/1145-repair-heating-rear-glass-glue.html
Which oil filter to choose for Lada Priora
Lada Priora is a restyled model of the familiar “tens”. Over the years of production, the car gained popularity, so three models appeared on its basis: a sedan, a hatchback and a station wagon. The modern line of VAZ engines is used not only on Lada Priora, but also on Grant, Niva, Kalina, Largus, and the manufacturer recommends the same oil filters for all models. The manufacturer also recommends changing the oil filter along with the oil, according to the catalog numbers.
Experts advise: before changing the filter, carefully examine it in the store. The body and top must be durable. It is also necessary to study the product certificate. The oil filter should be a brand you are familiar with and meet the quality class.
At the moment, oil filters that are suitable for the Lada Priora are produced not only by domestic, but also by foreign manufacturers.
It is extremely difficult to determine exactly which oil filter is better, since each car owner adheres to his own interests. Some give preference to quality, while others consider filter models based on cost. A survey of Lada Priora car owners led to the following results:
So there is simply no universal oil filter that will suit all segments of the population in all respects. Car enthusiasts often install such well-known foreign brands as Bosch or MANN on their Ladas. These products have been tested not only over time, but also with domestically produced consumables, and this is a significant factor.
The Lada Priora manufacturing plant strongly recommends changing the oil filter every 15 thousand mileage. But it is also necessary to take into account the conditions in which the car was operated. The Priora engine is not particularly selective, but if possible it is advisable to use high-quality synthetic oil, since the car will last much longer with it. The cost of synthetic oil will not allow everyone to easily purchase it, but it can be replaced with semi-synthetic oil of good quality.
How to distinguish a fake from an original filter
You can purchase consumables, including MF, in various places, namely:
- at the car market;
- in a specialized store;
- in online catalogues;
- through intermediaries.
Given the breadth of choice, for an inexperienced owner the risk of purchasing non-original products increases due to insufficient knowledge of unmasking factors.
When selecting consumables, be sure to check the availability of:
- and integrity of branded cardboard packaging;
- holographic protection from the front of the package;
- factory stamp with batch number, date of manufacture, country of origin;
- rubber seal on the inner diameter of the MF.
When purchasing, check for a quality certificate or other documentary materials indicating the origin of the product. If in doubt, refuse.
